lastkiss
-
Posts
25 -
Joined
-
Last visited
Posts posted by lastkiss
-
-
Tried both the alpha 2 loaders
DS3617xs works fine, migrated from DS3615xs without errors.
DS916p had network detection issues, probably driver related.
What does network detection issues mean? Did you see the kernel logs to be able to state that?
For DS916p to work you need the adequate hardware, and by adequate hardware I mean the CPU should be a braswell processors, 4th Gen Core processor or later. See here >>> viewtopic.php?f=2&t=20216&start=2530#p98458
My cpu Apollo Lake（J4205）should belong to 4th Gen Core processor or later。DS916+ can not be found on the LAN。
How can I check my log and guide me?
thank you
-
MB:asrock B85M-ITX
CPU:i5-4460T
LAN：Qualcomm® Atheros® AR8171
DS3617xs 6.1 Jun's Mod V1.02a2 can work,Continue to test
DS916p 6.1 Jun's Mod V1.02a2can not work，Synology Assistant could not find it DS916+，My router（R7000） can not be found this MAC address
MB:asrock J4205-ITX
LAN:Realtek RTL8111GR
DS916p 6.1 Jun's Mod V1.02a2can not work，Synology Assistant could not find it DS916+，My router（R7000） can not be found this MAC address
Where is wrong？？？
-
What speeds are you getting when SSD cache is turned off?
I think PCIE x1 is limited to 500MB/s (assuming PCIE 2.0), which would be shared by all devices plugged into this Interface.. No idea what the overhead is but I'd be inclined to make sure the SSDs are plugged into your motherboard, where they can make full use of the SATA3 interfaces (600MB/sec each)..
In fact, given the speed of PCIE x1, I probably wouldn't use it at all..
SSD cache is turned off
Speed The speed is ok, are close to 100MB
thank you
-
My NAS
DS3615xs 6.0.2 Jun's Mod V1.01
MB:J4205-ITX
RAM:KST 4G*2(1.35v)
Marvell 9215*1 PCIE 1X
HD:ST8000AS0002-1NA17Z*2 in Marvell 9215
SSD:x25-E*2 (SSD Cache)
When SSD cache enabled
Hard disk read speed is very slow（50-55M/s）, write ok（100M/s）
ASM1061 or Marvell 9215 will be so，very slow
Who can help me？
Thank you for everyone
Do you have this problem?
DS3615xs 6.0.2 Jun's Mod V1.01
--------------------------
set common_args_3615='syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet'
set sata_args='sata_uid=1 sata_pcislot=5 synoboot_satadom=1 DiskIdxMap=0C SataPortMap=44 SasIdxMap=0'
So you have 2x HDD and 2x SSD correct? Why not use all 4 onboard SATA ports?
yes，I tried it use all 4 onboard
The problem still exists
-
My NAS
DS3615xs 6.0.2 Jun's Mod V1.01
MB:J4205-ITX
RAM:KST 4G*2(1.35v)
Marvell 9215*1 PCIE 1X
HD:ST8000AS0002-1NA17Z*2 in Marvell 9215
SSD:x25-E*2 (SSD Cache)
When SSD cache enabled
Hard disk read speed is very slow（50-55M/s）, write ok（100M/s）
ASM1061 or Marvell 9215 will be so，very slow
Who can help me？
Thank you for everyone
Do you have this problem?
DS3615xs 6.0.2 Jun's Mod V1.01
--------------------------
set common_args_3615='syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet'
set sata_args='sata_uid=1 sata_pcislot=5 synoboot_satadom=1 DiskIdxMap=0C SataPortMap=44 SasIdxMap=0'
So now is it the SSD cache, or the portmap setup?
How to do it ?
-
When SSD cache enabled
Hard disk read speed is very slow（50-55M/s）, write ok（100M/s）
ASM1061 or Marvell 9215 will be so，very slow
-
My NAS
DS3615xs 6.0.2 Jun's Mod V1.01
MB:J4205-ITX
RAM:KST 4G*2(1.35v)
Marvell 9215*1 PCIE 1X
HD:ST8000AS0002-1NA17Z*2 in Marvell 9215
SSD:x25-E*2 (SSD Cache)
When SSD cache enabled
Hard disk read speed is very slow（50-55M/s）, write ok（100M/s）
ASM1061 or Marvell 9215 will be so，very slow
Who can help me？
Thank you for everyone
Do you have this problem?
DS3615xs 6.0.2 Jun's Mod V1.01
--------------------------
set common_args_3615='syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet'
set sata_args='sata_uid=1 sata_pcislot=5 synoboot_satadom=1 DiskIdxMap=0C SataPortMap=44 SasIdxMap=0'
-
Did you successfully configure your Marvell 9215 ? especially with external e-sata ?
I never was able to get it working (missing driver supporting e-sata multidisk I can't obtain here) ...
It works fine under freeNAS, but not with DSM
IO-PCE9215-4I
no configure mode，no external e-sata
I use ASMedia ASM1061 also very slow
-
My NAS
MB:J4205-ITX bios p12.0
RAM:KST 4G*2(1.35v)
Marvell 9215*1 PCIE 1X
HD:ST8000AS0002-1NA17Z*2 in Marvell 9215
SSD:x25-E*2 (SSD Cache)
There may be a problem with SSD cache enabled？？？
Do you have this problem?
DS3615xs 6.0.2 Jun's Mod V1.01
--------------------------
set common_args_3615='syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet'
set sata_args='sata_uid=1 sata_pcislot=5 synoboot_satadom=1 DiskIdxMap=0C SataPortMap=46 SasIdxMap=0'
-
Where is wrong？
DS3615xs 6.0.2 Jun's Mod V1.01
My motherboard is ASRock J4205-ITX
ASMedia ASM1061：Enabled
SataPortMap=22
intel SATA3 6.0 Gb/s Connectors will appear slow to read（50-55M/s）, write ok（100M/s）
when ASMedia ASM1061：Disabled
intel SATA3 6.0 Gb/s Connectors is ok。 Read and write can reach 100M
so I bought a new controller Marvell 9215，（ASMedia ASM1061：Disabled）
SataPortMap=24
Or the same problem ，intel SATA3 6.0 Gb/s Connectors will appear slow to read
Who can help me？
Thank you for everyone
Have you tried setting SataPortMap to 4/6? It might help
The problem still exists
Thank you
-
Where is wrong？
DS3615xs 6.0.2 Jun's Mod V1.01
My motherboard is ASRock J4205-ITX
ASMedia ASM1061：Enabled
SataPortMap=22
intel SATA3 6.0 Gb/s Connectors will appear slow to read（50-55M/s）, write ok（100M/s）
when ASMedia ASM1061：Disabled
intel SATA3 6.0 Gb/s Connectors is ok。 Read and write can reach 100M
so I bought a new controller Marvell 9215，（ASMedia ASM1061：Disabled）
SataPortMap=24
Or the same problem ，intel SATA3 6.0 Gb/s Connectors will appear slow to read
Who can help me？
Thank you for everyone
Have you tried setting SataPortMap to 4/6? It might help
I will try it
Thank you
-
Where is wrong？
DS3615xs 6.0.2 Jun's Mod V1.01
My motherboard is ASRock J4205-ITX
ASMedia ASM1061：Enabled
SataPortMap=22
intel SATA3 6.0 Gb/s Connectors will appear slow to read（50-55M/s）, write ok（100M/s）
when ASMedia ASM1061：Disabled
intel SATA3 6.0 Gb/s Connectors is ok。 Read and write can reach 100M
so I bought a new controller Marvell 9215，（ASMedia ASM1061：Disabled）
SataPortMap=24
Or the same problem ，intel SATA3 6.0 Gb/s Connectors will appear slow to read
Who can help me？
Thank you for everyone
-
Where is wrong？
DS3615xs 6.0.2 Jun's Mod V1.01
My motherboard is ASRock J4205-ITX
ASMedia ASM1061：Enabled
SataPortMap=22
intel SATA3 6.0 Gb/s Connectors will appear slow to read（50-55M/s）, write ok（100M/s）
when ASMedia ASM1061：Disabled
intel SATA3 6.0 Gb/s Connectors is ok。 Read and write can reach 100M
so I bought a new controller Marvell 9215，（ASMedia ASM1061：Disabled）
SataPortMap=24
Or the same problem ，intel SATA3 6.0 Gb/s Connectors will appear slow to read
Who can help me？
Thank you for everyone
-
@jun
DS916p 6.1 Jun's Mod V1.02-alpha not work on my motherboard
Assistant and http://find.synology.com/ can not find。
The same hardware DS3617xs 6.1 Jun's Mod V1.02-alpha，DS3615xs 6.0.2 Jun's Mod V1.01 is ok。
my motherboard：
1.asrock B85M-ITX （Qualcomm® Atheros® AR8171）
2.asrock J4205-ITX （Realtek RTL8111GR）
Who can help me
Do you run DSM on both mb at the same time? If yes then both has assigned the same mac and dhcp server can't assign IP. Ergo, you wo't find it.
It's because loader has hardcoded mac for 4 nics.
not same time,no boot at the same time
B85M-ITX only for test.
-
@jun
DS916p 6.1 Jun's Mod V1.02-alpha not work on my motherboard
Assistant and http://find.synology.com/ can not find。
The same hardware DS3617xs 6.1 Jun's Mod V1.02-alpha，DS3615xs 6.0.2 Jun's Mod V1.01 is ok。
my motherboard：
1.asrock B85M-ITX （Qualcomm® Atheros® AR8171）
2.asrock J4205-ITX （Realtek RTL8111GR）
Who can help me
Have you checked the USB VID/PID and made sure it's correct? In my case (a few pages back) that was the problem.
thanks for your reminder。Can you help me check it 。
-
@jun
DS916p 6.1 Jun's Mod V1.02-alpha not work on my motherboard
Assistant and http://find.synology.com/ can not find。
The same hardware DS3617xs 6.1 Jun's Mod V1.02-alpha，DS3615xs 6.0.2 Jun's Mod V1.01 is ok。
my motherboard：
1.asrock B85M-ITX （Qualcomm® Atheros® AR8171）
2.asrock J4205-ITX （Realtek RTL8111GR）
Who can help me
-
they published new version: 6.1-15047
link: https://www.synology.com/en-global/releaseNote/DS3615xs
i am using 6.0.2-8451 cna I make update to 6.1-15047 version. booting will work?
I had crazy question on my head
It will not work! Don't attempt to upgrade to 6.1
PC
1.Use DiskGenius
2.Format 2.4G Disk Partition
Synology
3.Jun's v1.01 loader Force install 6.02
Somebady successfully returned to 6.02
You can try it
Data important, careful operation!!!!!!!!
-
@ lastkiss
how to test turbo boost？
I am also a beginner
> grep "MHz" /proc/cpuinfo
cpu MHz : 1501.000
cpu MHz : 1501.000
cpu MHz : 1501.000
cpu MHz : 1501.000
-
opty said:@ lastkiss
what about the turbo boost on J4205, is it working? what is your over all experience with this board. currently i am using Q1900 and very happy with it and in the market for a second NAS.
how to test turbo boost？
I am also a beginner
-----------------------
processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 92 model name : Intel® Pentium® CPU J4205 @ 1.50GHz stepping : 9 microcode : 0x1e cpu MHz : 1501.000 cache size : 1024 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 21 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave rdrand lahf_lm 3dnowprefetch ida arat xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust smep erms rdseed smap bogomips : 2995.43 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual power management: -
I just saw this information and did not see the version released
Very much looking forward to DS916+ version released
-
This problem has been haunting me
Really want to be able to display correctly
cpu：J4205
Thank you for everyone
It just wont be possible unless you recompile DSM from scratch and change accordingly the source code to match your CPU name and speed.
Thank you for your answer
-
hw acceleration with videostation not support
taobao.com Not all are fake
-
This problem has been haunting me
Really want to be able to display correctly
cpu：J4205
Thank you for everyone
-
Hope to have DS916 version with hardware acceleration for video's，very much .
So I would like to ask will be released？
Hope to support ：ASRock J4205-ITX
thank you
DSM 6.1.x Loader
in Loaders
Posted
me too.
Asrock J4205-itx MB
DS916+ 1.02a2
It starts and loads the kernel but my rig isn’t found on my network,too.