dadark
-
Posts
5 -
Joined
-
Last visited
Posts posted by dadark
-
-
Let's set up a static IP Address
Enter the ip address for your server: (looks like 192.168.1.22) Enter the netmask for your network: (looks like 255.255.255.0) 255.255.255.0
255.255.255.0
Enter the IP of your router: (looks like 192.168.1.1) Router IP and IP Address cannot be the same. Please re-enter a valid Router IP Address.
Enter the IP of your router: (looks like 192.168.1.1) 192.168.222.1
192.168.222.1
Your new settings will be:
Your new XPEnology IP is:
The Mask for the Network is: 255.255.255.0
Address of your Router is: 192.168.222.1
Is this informations correct? [y/n/c]: Please enter y or n!
Press [Enter] key to continue...
It jumps direct to submask..
Could you try again? Maybe doublr enter key? Looks like you didn't fill out the first IP for Diskstation. If you have to backspace it may have gotten corrupted. Should look like what is on the XPEnology Configuration Tool section. Also this static ip is only set for the install process. After install you'll have to set Static IP in DSM.
Sent from my SM-N920T using Tapatalk
I tried it 3 times. when i try to don't put anything to submask he ask me again to put the submask. i went to this screen to a serial connection.
Now i will try it again with a Ubuntu PC and Virtualbox. Before u used a Mac.
-
Let's set up a static IP Address
Enter the ip address for your server: (looks like 192.168.1.22) Enter the netmask for your network: (looks like 255.255.255.0) 255.255.255.0
255.255.255.0
Enter the IP of your router: (looks like 192.168.1.1) Router IP and IP Address cannot be the same. Please re-enter a valid Router IP Address.
Enter the IP of your router: (looks like 192.168.1.1) 192.168.222.1
192.168.222.1
Your new settings will be:
Your new XPEnology IP is:
The Mask for the Network is: 255.255.255.0
Address of your Router is: 192.168.222.1
Is this informations correct? [y/n/c]: Please enter y or n!
Press [Enter] key to continue...
It jumps direct to submask..
-
@Quicknick the rest of the id_rsa is not printed. It looks like i posted it. Thanks for the password now i get in. Via NAT i can ping to the Internet. Then i want to set a static ip but when i press 4 and enter it jumps directly to the submask. witch file i have to edit for that?
@A.S._id can u export a .ova so that i have all your settings? Now it will not start up.
-
Hello,
first thank you for the great work !!!
EDIT: @A.S._id do you get this to work under Virtualbox? Can you provide how?
I want to use this under Virtualbox. But after i imported the esxi files and started the system the VM don't get a IP from my Router.
When i use a Host-Only Connection it gets a Ip from from VB. But i cannot get a ping, telnet or ssh connection.
If i use NAT then my Firewall ask my after booting to allow or not a connection to a synology server. So i think networking is working in the VM.
Sadly i cannot the the root password for today. Can u give me that for today or tomorrow? than i could look more into it. I didn't find the link to the generator.
Can u try your work under Virtualbox to run or someone else get it an can provide how to do?
I changed the VMDK from SCSI to SATA because i else got one more error while booting.
Here is the bootlog:
~ XPEnology Boot loader presented by quicknick v2.2 ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Detected hypervisor: virtualbox kvm :: Loading module ipmi_si [FAILED] Insert net driver(Mindspeed only)... :: Starting /usr/syno/bin/synocfgen... [ OK ] /usr/syno/bin/synocfgen returns 0 Exit on error [1] Loading XPEnology Configuration Tool... Sat Dec 10 21:40:29 UTC 2016 none /sys/kernel/debug debugfs rw,relatime 0 0 sys /sys sysfs rw,relatime 0 0 none /dev devtmpfs rw,relatime,size=2012052k,nr_inodes=503013,mode=755 0 0 proc /proc proc rw,relatime 0 0 linuxrc.syno failed on 1 starting pid 6973, tty '': '/etc/rc' :: Starting /etc/rc :: Mounting sysfs [ OK ] mdadm: error opening /dev/md1: No such file or directory rc: Use all internal disk as swap. /etc/rc: line 107: sed: not found /etc/rc: line 107: /usr/syno/sbin/synostgsysraid: not found /etc/rc: line 107: sed: not found rc: No assigned swap disk (sda2) can be assembled, use all instead. rc: Use all internal disk as swap. /etc/rc: line 107: sed: not found /etc/rc: line 107: /usr/syno/sbin/synostgsysraid: not found /etc/rc: line 107: sed: not found rc: No disk (sda2) can be assembled. swapon: can't stat '/dev/md1': No such file or directory :: Loading module acpi-cpufreq [FAILED] :: Loading module btrfs [ OK ] mount: open failed, msg:No such file or directory mount: mounting /dev/bus/usb on /proc/bus/usb failed: No such device ln: /proc/bus/usb/devices: No such file or directory :: Loading module synobios [ OK ] udhcpc (v1.16.1) started eth0 Link encap:Ethernet HWaddr 00:11:32:49:B8:95 inet addr:192.168.56.101 Bcast:192.168.56.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:9 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1180 (1.1 KiB) TX bytes:1648 (1.6 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) :: Starting syslogd [ OK ] :: Starting scemd :: Starting services in background Starting findhostd in flash_rd... Starting services in flash_rd... Running /usr/syno/etc/rc.d/J01httpd.sh... Starting httpd:80 in flash_rd... Starting httpd:5000 in flash_rd... Running /usr/syno/etc/rc.d/J03ssdpd.sh... /usr/bin/minissdpd -i eth0 (15): upnp:rootdevice (51): uuid:upnp_SynologyNAS-00113249b895::upnp:rootdevice (57): Synology/synology_bromolow_3615xs/6.0-8451/192.168.56.101 (47): http://192.168.56.101:5000/description-eth0.xml Connected. done. /usr/syno/bin/reg_ssdp_service 192.168.56.101 00113249b895 6.0-8451 synology_bromolow_3615xs eth0 Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh... Starting synoagentregisterd... Running /usr/syno/etc/rc.d/J30DisableNCQ.sh... Running /usr/syno/etc/rc.d/J80ADTFanControl.sh... Running /usr/syno/etc/rc.d/J98nbnsd.sh... Starting nbnsd... Running /usr/syno/etc/rc.d/J99avahi.sh... Starting Avahi mDNS/DNS-SD Daemon cname_load_conf failed:/var/tmp/nginx/avahi-aliases.conf ============ Date ============ Sat Dec 10 21:40:38 UTC 2016 ============================== Starting sshd service ... sshd service is running with pid 8471 You must copy the text below into ~/.ssh/id_rsa in order to connect via ssh. Make sure you chmod 600 ~/.ssh/id_rsa ==================== id_rsa ======================== -----BEGIN RSA PRIVATE KEY----- MIIEogIBAAKCAQEAvsK6v+E3ESClz6sDCU9SmRcSat Dec 10 21:40:39 2016 DiskStation login:I removed all ok messages.
I think the Login comes to early to see the root password.
XPEnology Configuration Tool & Bootloader DSM 6.0.2-8451
in Loaders
Posted
I tried the vmdk file now on 3 different Virtualbox host and 2 Routers. But on all the bridged networking is not working.
Sometimes the VM get a IP but i can't ping this ip and from the vm i can't ping anything on the network. Only NAT is working.
When i forward Port 5000 then i can start the installation but it break with corrupt .pat file. even when i set the bootdrive to non persistent.
Maybe because the drive get formatted too till restart or the quicksetup is not working.
If someone need the root password for today: c12-0b01
When i start 1.quicksetup via serial then i see this screen:
This Quick Configuration Guide will help you set MAC Address,
Serial Number and vid/pid of your USB on the grub config
These options are necessary to install Synology DSM successfully.
Would you like to continue? [y/n]: Please enter y or n!
Press [Enter] key to continue...y <-- first possible input
Is this correct? I think i have to put the y one line up because the message say only press enter.