snakefox666
-
Posts
37 -
Joined
-
Last visited
Posts posted by snakefox666
-
-
6 hours ago, synofreak said:
Hi @Jun THX for great Update!
HP Microserver N40L no Problems at the Moment!!!
cu-ya
Did you update from previous version or it's a fresh install ? I'm curious because I have an N40L too
Thanks mate !
-
Un grand merci à Lionel0676, testé et approuvé sur mon N40L ce week-end !
-
Hello all,
did someone test this tutorial on an HP N40L ?
Rgds.
-
Hello All,
could someone help me to integrate "Usb 1.1 ohci-hcd driver" on my N40L ? (jun's release).
I was waiting for the new quicknick release that should integrate it but I was thinking to try it myself
I'm pretty happy with the Jun's release, only missing my USB UPS due to this driver not integrated.
-
best wishes, next release 2.3 integrated with cpufreq support. also powernow driver (for AMD cpu, N54L...etc), which supported in DSM 5.x.
already the case today with Jun's loader, at least with my N40L ...
-
Hi everybody,
DSM 6.0 works fine on my HP54NL but one thing still missing: USB 1.1 Support for my UPS.
Is it coming in the near Future?
Thanks Peter
P.S. GREAT WORK!!!
+1
-
I will make sure this driver is availble when next release is out, developers can also compile ohci-hcd yourself.
Thanks in advance for that jun
-
I don't know if it can help for the UPS issue on HP microserver :
#4: OHCI supportCurrent releases of the XPEnology lacks OHCI USB support (remember: USB 1.1 hardware has two different driver models, UHCI and OHCI; also all USB 2.0 hosts has two drivers, one for USB 2.0 protocol (EHCI) and one for USB 1.1 (UHCI or OHCI)). This is the reason because in the HP Microserver you lack USB support for low speed devices (like keyboard, mouse, UPS, etc.). The kernel loads the correct EHCI driver, but for USB 1.1 speeds only has the UHCI driver and the system can't comunicate with your devices.
Here the solution: Add support for OHCI driver.
You only need to modify the config file in the kernel with:
CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_OHCI_HCD=m CONFIG_USB_OHCI_HCD_SSB=y
And this will generate the correct "ohci-hcd.ko" module. This module will be automatically loaded at boot, so you only need to copy them to "/lib/modules/".
WARNING:
After recompiling this module the module "usbcore.ko" is different. If you try to load the "ohci-hcd.ko" in a system with the original "usbcore.ko" module already loaded you receive a kernel fault. You need to replace also the "usbcore.ko" module!!!
FOR MICROSERVER USERS:
If you like to complete your USB support in your machine:
1) Download the extended package of kernel modules (modules-4.2-02.05.2013.tar.gz ) and copy all of them in the directory "/lib/modules/": https://docs.google.com/file/d/0B5tpWhE ... _web&pli=1
2) Download the new "usbcore.ko" and "ohci-hcd.ko" modules and copy them to "/lib/modules/": http://pastebin.com/sH4RieEj / http://pastebin.com/4vL65THx
3) Reboot and you have full USB support (all ports, USB 1.1 and USB 2.0 speeds)!
I want to get my USB external hard drive working with my HP microserver.
I have a few questions:
1) do I need to do both steps? Ie add support for OHCI driver and copy across the kernel modules?
2) if so, which file do I need to modify in the kernel and how do you do this?
3) what's the best method for copying across the modules?
It would be great if someone could post a step by step guide to doing this?
Thanks
Mike
-
hello with the last loader on my N40L, the RTL8153 in my hub usb3 doesn't work
I found why my UPS was no longer connected, the USB chipset original for N40L does not work, I plugged in my USB3 hub in my PCI usb3 and is now detected
Hey jun, do you think that it's possible to integrate the driver for USB chipset of the N40L into your image ?
+1
Just a tiny up
If someone want to help on that and need more information don't hesitate to ask ...
-
Bonjour,
Comment savez-vous que cela fonctionne car sur mon N54L en lançant la commande ci-dessous dans putty mon processeur reste à sa fréquence max de 2200Mhh.
grep "MHz" /proc/cpuinfo
Mais en créant un script utilisateur au démarrage avec l'utilisateur root j'ai mon processeur qui descend à la fréquence de 800Mhz.
code à mettre
for c in $(ls -d /sys/devices/system/cpu/cpu[0-9]*); do if ! grep -q 'conservative' $c/cpufreq/scaling_governor ; then echo conservative >$c/cpufreq/scaling_governor ; fi done
Et là l'économie d'énergie est activée.
C'était sous entendu en fait qu'il faut utiliser le script ci-dessus, en effet de base après l'installation le CPU est au max. Désolé si ce n'était pas claire.
-
Il existe même un script pour gérer l'économie d'énergie (S99PowersavingAMD.sh).
#!/bin/sh insmod /lib/modules/powernow-k8.ko for c in $(ls -d /sys/devices/system/cpu/cpu[0-9]*); do if ! grep -q 'conservative' $c/cpufreq/scaling_governor ; then echo conservative >$c/cpufreq/scaling_governor ; fi done
Bàv
Youpie le portage a été fait et fonctionne très bien.
Savez-vous si l'économie d’énergie est intégrée?
Et si un support pour les UPS est prévu?
Je ne sais pas si quelqu'un à répondu mais je confirme que sur un N40L la fonction d'économie d’énergie marche impeccable
-
hello with the last loader on my N40L, the RTL8153 in my hub usb3 doesn't work
I found why my UPS was no longer connected, the USB chipset original for N40L does not work, I plugged in my USB3 hub in my PCI usb3 and is now detected
Hey jun, do you think that it's possible to integrate the driver for USB chipset of the N40L into your image ?
-
Hello All,
I have updated my HP N40L successfully, thanks for the authors of this loader !!!
Just a "little" thing regarding the UPS, nothing was detected and it was working before in 5.2 (USB UPS)
Any idea ?
-
Up to be over the spam message
-
Hello all,
Since yesterday I have a very strange issue with my Xpenology (HP N40L). Everytime I do a "ls" on the / directory all the services of my NAS was gone and not working, Samba, Syno webpage, all ... I can reboot the NAS and everything is back again until I connect in SSH and do "ls" in / again
There is nothing special in the logs, it seem that when the thing happen the system create a new folder for /var and /run :
for example if I'm doing a ls on this new /var or /run folder I can find "new" files since my crashing command. I can't enter the 2 strange folders with very strange characters "no such files or directory"
I already tried to unmount the partition and do fsck but the same...
That's very very strange, that's not a big deal as for the moment I don't need to use the SSH
Any idea is welcome
-
I did the update from 4493 to update 1 directly from the syno interface without ssh command
It's a new feature of nanoboot ? It's cool
So you're telling me we can just use the update in the control panel now... ?
I do it yesterday, I don't know if it's a new supported feature of nanoboot but it work
-
I did the update from 4493 to update 1 directly from the syno interface without ssh command
It's a new feature of nanoboot ? It's cool
-
Hello all,
I recently updated from gnoboot to latest nanoboot with DSM 4493 but I noticed a decrease of my network speed.
Before update a copy from my HP N40L was 120MBs approx and now 70-75MBs
Any idea ?
It's not critical but annoying.
Thanks guys.
-
Hello All,
did someone test with an HP N10L ?
If I want to migrate from gnoboot (DSM 5.0) to this version is possible ?
Thanks mate
-
Do you know if nanoboot is working with an HP N40L ?
-
Hello gnoBoot,
any idea on this topic : viewtopic.php?f=2&t=2966 ?
Don't hesitate if you want to have some logs or whatever ...
-
I don't use a serial number generator for my installation of DM5, maybe can I try to change the serial number ?
-
No success any other idea ?
-
You mean to access the DSM through http://ipofdsm:5001 will solve this issue instead of https://.... ?
Memory usage are increasing over weeks and the NAS finally crashed
in General Questions
Posted
Hello,
I've a strange issue with my brand new DS 916+, I had previously a HP N40L with xpenology and after more than 5 years of good services I decided to buy a real synology
The RAM usage of my DS916+ (8Gb) is increasing over weeks and finally the nas is crashing. After couples of investigations it seem to be related to slab memory usage that increasing dramatically. Bellow you will find the result of some commands related to slab functionnality. We can see that "cred_jar" is using most of the memory and it's "Unreclaimable"
After a reboot of the nas the memory start at more or less 20% of usage and is incresing over 2 or 3 weeks to more than 90%.
I tried to contact the synology support but the only answer is "Grant us remote control" and I don't want to let them access my private NAS
Any help is welcome, thanks guys 😎