muaddib81
-
Posts
9 -
Joined
-
Last visited
Posts posted by muaddib81
-
-
6 minutes ago, bajwha said:
yes, tried that.here is my please check cfg.
How is with the serial number? https://xpenogen.github.io/serial_generator/index.html
-
1 hour ago, bajwha said:
well after updating Bios I got the DHCP on windows 10 but when I boot form xpnology usb no IP from DHCP.
any help?
Have you changed the grub.cfg file and uncommented the third menuentry (DS3617xs 6.2 Baremetal AMD $VERSION)? And selected on boot (set default='2' or select the one on boot)?
-
Loader: Jun's 1.02b 3615xs
Platform: HPE Microserver Gen7, AMD Turion™ II Neo N54L, 4GB RAM, modified BIOS
DSM: 6.1.7-15284
LAN: 2x NC107i PCIe Gigabit Server Adapter (BCM5723)
HDD: 2x 2 TB WD RED, 1x 4TB WD RED in RAID5
Running two weeks, no problems!
-
HP Microsever N54L - Baremetal
Bootloader Jun 1.02bDSM Ver. DSM 6.1.4-15217 Update 5
4gig RAM
3x 2TB HDD's
Volume = RAID5 -
42 minutes ago, neotronic said:
Can you just enter the IP into your browser and you should see the initial page. If that's not working check your router DHCP table or scan the subnet for addresses of your NAS. Not sure if your N40L has a different NIC to a N54L.Thank you for your answer. The hardware is the same between N36L, N40L and N54L. The only difference is the processor.
I found out that F10 is not save and exit in BIOS but load default or something similar. I've turned off the C1E, but as I rechecked it right before, it was enabled again. Disabled and the migration is in progress
EDIT: Migration finished and no data loss
-
Hi!
I probably didn't do anything I had to. Please help me find out what I've forgot.
Hardware: HP Microserver N40L
These are the steps I took:
* Download jun 1.02b loader
* Edit grub.conf - VID+PID, SN, MAC edited
* C1E disabled in BIOS
* Copied the img to USB
* Booted from USB
I can reach my "Web service", nothing was found with find.synology.com, the 22 and 5000 ports are not accessable.
I've installed the Synology Assistant, which was also unable to find the NAS.
-
On 6/28/2017 at 8:06 AM, Qwertyz said:
+7 for AMD support
I think there is still plenty of people having the older HP Gen7 with AMD as it is small and fast enough for NAS.
Using ESXI is possible, but I need to sacrifice one disk for VM Datastore instead of using it for data.
+8 for AMD support
-
Woooooohoooo... worked for me on HP Microserver N40L like a charm! THANK YOU!!!
Have DSM 6.0.2-8451 Update 4 on it! I have a spare 64GB ssd and will give it a try as ssd cache too!
Thank you again for the loader!
DSM 6.2 Loader
in Loaders
Posted
I have a HP Microserver Gen7 (N54L) with 3617 image working. I can share my grub.txt. Keep in mind to change the vid, pid, sn and mac!
grub.cfg