grotoc311
-
Posts
6 -
Joined
-
Last visited
Posts posted by grotoc311
-
-
I have already played with the nfs settings, even reload the nfs service, but nothing worked.
But, I just noticed that my xpenology on my proxmox server was using realtek driver ! I've changed it to intel, and I'll see if it works better.
-
They seems to be an intel. Here what I have from lspci :
06:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
06:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
-
Hi,
I have a Xpenology with DSM 5.2 on a Proxmox server. I have set up different nfs share and everything is close to be perfect. The only problem I have is the NFS performance.
When the Xpenology starts, I have very good performance with NFS (100MB/s) but it decreased over time until falling to a pitiful (1MB/s)...
I tried to change nfs configuration on the client, to restart nfs service on the synology. But nothing works. If I want to get back to my 100MB/s I have to reboot the VM, until the problem occurs again.
Does anyone would know what I should do ?
Thanks.
-
Yes, the majority made it works, so I don't understand what I did wrong.
-> I followed the tutorial for flashing the H200 (https://techmattr.wordpress.com/2016/04 ... -and-h310/) and everything went well.
-> I set up the disk in passtrough in proxmox with
scsi0: /dev/disk/by-path/pci-0000:02:00.0-sas-0x4433221100000000-lun-0,size=2930266584K
I can see the disk, I can see its smart value with smartctl in the synology but not with synodisk...
I really don't get it.
-
Hi,
I have the same issue. I have flashed my Dell H200 to LSI9211-8i. I can see with sas2flsh that NVDATA Product ID is set to SAS8211-8i and that the firmware is set to 19. So I believe that the controller is on IT mode. My xpenology recognize the six drives. With smartctl I can see the SMART data, but synodisk doesn't recognize the SMART data.
In the controller name I have "SAS2008(??)". Could the "??" be the problem ?
Thanks.
NFS performance
in DSM 5.2 and earlier (Legacy)
Posted
Well, it's seems it's working normally now. I don't have any drop performance for two days. The issue was that I choose the wrong network driver on my proxmox server for this vm.
Thanks for your help.