lolo9419
-
Posts
7 -
Joined
-
Last visited
Posts posted by lolo9419
-
-
Finalement problème réglé, c'était bien la carte raid qui empêchée le boot en espérant qu'un fix vera le jour
merci pour votre aide
-
Hello everyone,
First of all, thanks to everyone trying to make this new dsm work, excellent job!
Now, i have a Dell PERC H200 flashed to a LSI 9211-8i, it was working perfectly on DSM 5.2 but on this one as long as the card is plugged, nothing boot, i get the "Booting Kernel" screen but never find the NAS on the network, without it, no problem, everything goes smoothly.I'm using the arcao V2 image. If anyone knows a easy fix, let me know
Thanks
-
J'ai peut être trouver mon probleme: l'adresse mac qui se trouve dans le fichier grub.cfg doit-elle être celle des cartes réseaux ou bien je peux laisser celle que j'ai générer a l'époque en meme temps que le serial ?
-
D'accord, après avoir regardé il semble qu'aucune des deux cartes réseaux ne fasse de demande DHCP(aucunes traces sur mon routeur) donc ça n'arrive pas jusqu'a l'initialisation des cartes réseaux apparement... Je vais creuser ça demain
-
J'ai essayé avec safari et le logiciel de synology "synology assistant", j'ai les deux cartes réseau connectées. Peut-etre le problème ?
Je vais essayer de voir si c'est pas ma clé usb
-
Bonjour a tous,
J'ai tenté d'installer DSM 6.0 sur un HP Proliant Gen 8 en Baremetal pour mettre à jour un dsm 5.2, seulement, j'ai parfaitement suivi le tuto, modifiez le pid/vid, serial, mac. Le boot se fait correctement, du moins, j'arrive à l'écran "Booting Kernel" et après mon nas n'apparait pas sur find.synology.com. Je doute que le nic des proliants gen 8 ne soit pas pris en charge étant donné la popularité de ce modele .Avez vous une solution ?
Merci d'avance pour votre aide,
(ps:j'ai une carte lsi connecte sur le serveur (si ceci peut avoir un impact sur le boot)
Nvidia Runtime Library
in Synology Packages
Posted · Edited by lolo9419
Hi,
I also added a quadro p400 in my Xpenolgy (3615xs and on a Hp microserver gen 8 ) and i'm interested of using it for Plex. After Doing some testing i was able to get at the same step as you, i get it to show my p400 with the command :
but then it hangs forever and doesn't give me back the control... and if i start another ssh session and re-try /usr/local/bin/nvidia-smi.. it never does anything, just hang, only way to fix it is to restart. It does not crash the system at all, just create a dead process.
i do see the expected messages in dmesg
and i get this from the hanged command :
I used these instructions/drivers to make it "works". As the more recent version of the driver given under or the one extracted from the pat of the DS1618+ (as suggested by King Butter) gives me the "Unknown symbol in module" when trying to inject into the kernel.
Trying on plex.. It's also detected but i get the same error :
I'm probably not helping you to make any progress, but i thought i would comment what i did in case it might help .
Thanks to everyone for the work trying to figure this out. If i can help in any way, let me know !