Moonlight
-
Posts
4 -
Joined
-
Last visited
Posts posted by Moonlight
-
-
Everything works with new V1 loader... Except for 2 nic's. I to am experiencing this issue. If you set just mac1=, everything is fine and dsm reports both nics (although the second one is obviously inaccessible remotely), but as soon as set mac2= is added, both connections quit. That's a pretty big problem. Any thoughts? I want my 10G connection, pls hlp
When you added the mac2= did you also try editing the synoinfo.conf file to manually set it as active? It should then show under Hardware and Power with a check box for WOL. Maybe you can use that to see if the card is accessible on the network?
The network card shows up in Network, and it shows LAN2. I don't see anything in synoinfo.conf that says it's disabled. I can't change anything in synoinfo after adding mac2 because as soon as I add mac2 I lose access to everything.
OK, new information maybe. I don't have mac2= added because I still need access to my files at the moment. However, when loading up syno assistant, it shows "2 servers" one for each nic. The status of each server is: the 1gb nic is ready, the 10gb nic is connection failed. I can only assume that the reason this isn't working is something to do with the mac2= problem. Unfortunately I am not a linux master, so I really don't know what more information I can provide.
-
Everything works with new V1 loader... Except for 2 nic's. I to am experiencing this issue. If you set just mac1=, everything is fine and dsm reports both nics (although the second one is obviously inaccessible remotely), but as soon as set mac2= is added, both connections quit. That's a pretty big problem. Any thoughts? I want my 10G connection, pls hlp
When you added the mac2= did you also try editing the synoinfo.conf file to manually set it as active? It should then show under Hardware and Power with a check box for WOL. Maybe you can use that to see if the card is accessible on the network?
The network card shows up in Network, and it shows LAN2. I don't see anything in synoinfo.conf that says it's disabled. I can't change anything in synoinfo after adding mac2 because as soon as I add mac2 I lose access to everything.
-
Everything works with new V1 loader... Except for 2 nic's. I to am experiencing this issue. If you set just mac1=, everything is fine and dsm reports both nics (although the second one is obviously inaccessible remotely), but as soon as set mac2= is added, both connections quit. That's a pretty big problem. Any thoughts? I want my 10G connection, pls hlp
cheap pcie lancard for1.02a (DS3615xs) & Dsm 6.1
in Hardware Modding
Posted · Edited by Moonlight
ramdisk... not loader
Welp, if you suddenly find yourself in a tough spot and need a nic that works with juns 1.02b dsm 6.1.x... I can confirm that the TP-Link TG-3468 works just fine! One late night emergency run to Frys Electronics later. *cough cough*
Apparently it has a realtek chip on board which is why it works.
Dont know if it matters, but I am using Polanskimans 6.1 ramdisk from here, never tried with the default ramdisk though: