c-lon
-
Posts
6 -
Joined
-
Last visited
Posts posted by c-lon
-
-
Zarocq: How did you manage to not have your bios settings being reseted upon reboot?
I haven't done anything to prevent it. I didn't know it was a problem.
Just reboot and check your bios and ... *boom*
-
...
Removed the USB stick and rebooted the server and went into BIOS.
Configured the BIOS according to this:
From the main screen go to ‘Chipset > Southbridge Configuration > SB SATA Configuration’ and make sure your settings are the same as below:
OnChip SATA Channel = Enabled
SATA PORTS 4/5 IDE mode = Disabled
SATA EPS on all PORT = Enabled
SATA Power on all PORT = Enabled
Return to the main screen then go to ‘Advanced > IDE Configuration’ and again, make sure your settings are the same as below.
Embedded SATA Link Rate = 3.0Gbps MAX
Zarocq: How did you manage to not have your bios settings being reseted upon reboot?
-
hi everybody, I try to activate wake on lan on my N54L but I can not do
How to proceed?
sorry for my english
-
hi everybody,
I've try this build on Gigabyte B75M-D3H (Rev 1.0),
it's work!
Thanks for sharing
nokian82uk (or anybody else): Does scheduled shutdown / startup work on your board? (control panel -> Power -> Schedule -> "create 2 tasks")
and what about HDD hibernation - does ist work?
thx and regards
-
+1 for an official XPEnology wiki to gather all the hardware info of running and non running components...
HP N54L Microserver - Getting Everything Working
in AMD
Posted
mine gets reseted to default values (and others viewtopic.php?f=2&t=1373&p=6626&hilit=bios+reset#p6626) - no fixes so far...
Edit: Just read viewtopic.php?f=2&t=1082&p=6459&hilit=bios+reset#p6459
"Could you look at one old problem in Xpenology - BIOS goes to reset state
(there are several reports for different hardware configurations) when power-off shedule is enabled?"
I have scheduled power-off, what about you?