[USB 3.0 Gigabit Ethernet Adapter]

Static IP doesnt work, too.

 

Seems that there is no connection to the network. Something in DSM blocks communication.

[USB 3.0 Gigabit Ethernet Adapter]

Hi,

same problem here.

I buyed a Rankie USB 3.0 zu RJ45 10/100/1000 Gigabit Ethernet LAN.

Recognized in busibox and DSM GUI but gets no IP.

 

 

eth1      Link encap:Ethernet  HWaddr A0:CE:C8:0F:C1:B8
         inet addr:169.254.217.38  Bcast:169.254.255.255  Mask:255.255.0.0
         inet6 addr: fe80::a2ce:c8ff:fe0f:c1b8/64 Scope:Link
         UP BROADCAST RUNNING MULTICAST  MTU:9000  Metric:1
         RX packets:4448 errors:0 dropped:0 overruns:0 frame:0
         TX packets:720482 errors:56 dropped:30 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:1530088 (1.4 MiB)  TX bytes:119029131 (113.5 MiB)

 

Any ideas?

Greetings

[USB 3.0 Gigabit Ethernet Adapter]

Hi,

same problem here.

I buyed a Rankie USB 3.0 zu RJ45 10/100/1000 Gigabit Ethernet LAN.

Recognized in busybox and DSM GUI but gets no IP.

 

 

eth1      Link encap:Ethernet  HWaddr A0:CE:C8:0F:C1:B8
         inet addr:169.254.217.38  Bcast:169.254.255.255  Mask:255.255.0.0
         inet6 addr: fe80::a2ce:c8ff:fe0f:c1b8/64 Scope:Link
         UP BROADCAST RUNNING MULTICAST  MTU:9000  Metric:1
         RX packets:4448 errors:0 dropped:0 overruns:0 frame:0
         TX packets:720482 errors:56 dropped:30 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:1530088 (1.4 MiB)  TX bytes:119029131 (113.5 MiB)

 

Any ideas?

Greetings

[USB Ethernet Adapter]

Hallo zusammen,

 

ich habe einen USB GBit Ethernet-Adapter an mein Xpenology gehängt. Dieser wird auch ohne Probleme erkannt als "USB 10/100/1000 LAN - Realtek Semiconductor Corp.".

Allerdings erhalte ich keine IP-Adresse per DHCP (Nur 169...).

Auch wenn ich eine manuelle IP-Adresse vergebe, antwortet mein Xpenololgy nicht.

 

Hat jemand Erfahrungen damit?

 

Gruß

Han