chotws Posted November 24, 2016 Share #1 Posted November 24, 2016 테스트 할 장비는 2ea이고요. 랜카드 2개가 있습니다. 1대는 설치를 했는데 1ea는 뭔가 이상합니다. 랜포트 1에 공인 ip 넣고 랜포트2에 하트비트용 사설ip 넣었습니다. 근데 고가용성 구성시에 랜포트1로 잡으라는데 랜포트1에 공인ip가 할당되었는데 이것도 괜찮은건가요? (구성을 다시 해야 하는건가요?) 애초에 xpenology에서 고가용성이 되는건가요? 혹시 되는 os가 따로 있는건가요? Quote Link to comment Share on other sites More sharing options...
LetITgo Posted November 25, 2016 Share #2 Posted November 25, 2016 가능하다고 봅니다. 성공 사례도 있고요, 다만 많은 유저가 HA구성할 필요성을 못느껴서 많이 사용하지 않나봅니다. 핵심 요점을 정리하면, 각 기기에 최소 2개의 랜카드가 있어야 하고, 각 기기에 시리얼 포트가 있어야 하고 (없으면 에러난다고 함), 두 기기의 시리얼 번호와 MAC 주소가 서로 달라야 하며 (참고로 MAC 주소는 00:11:29:... 로 구성돼야 한다고 함), 마지막으로, HA 설정을 완료한 뒤에 볼륨을 생성해야 한다는 것 입니다. 그 전에 볼륨 생성해 놓으면 에러 난다고 하네요. 해 보시고 나서 사용기를 올려 주시는 것도 다른 유저에게 도움이 되겠네요~ Hi, few hintsOn Esxi, add serial interface on both machines and point them into a file somewhere in filesystem Both machine Must have 2 nics, one connected on lan where you can manage them, another one connected on same ethernet segment whitout ip address, those are for heartbeat Both must have MTU of 9000 Do not create any volume, both have to have same version of DSM and updates in this way you can enable HA 출처: viewtopic.php?f=2&t=18358#p69795 With last active Xpenoboot 5.2.5592.2 on 2 different Pc (Old Dell 745) with 1 disk 200Gb,2Gb ram and 2 network interface (one integrated ad one Intel pro100 desktop adapter), the process of creating cluster terminated correctly!!...I notice that the network adapter added is essential for completing the process.. With normal oem adapter the process gave error durig first phase... The configuration is really simple... Create 2 usb key from img file for xpenoboot, modify on second key the cfg file changing the serial number (last digit is 3 i changed to 5).. Install normally the synology system on either systems.. On the first network adapter configure a static ip address... The second adapter (for the heartbeat) on dhcp... Connect directly the second adapter (the heartbeat) of either systems with a crossover cable (do not pass throught switch because the process change the MTU value to 9000)... Create a volume on every system with standard mode (Synology raid mode SR isn't supported), in my case i have only one disk without raid protection. Launch HA procedure adding the second ip, user and password.. The process terminated succesfully... 참고: viewtopic.php?f=2&t=1998&start=10#p45964 Quote Link to comment Share on other sites More sharing options...
chotws Posted November 28, 2016 Author Share #3 Posted November 28, 2016 시리얼 포트라는게? 정확히 어떤 포트인가요? 조립서버라서 시리얼 포트가 있는지도 모르겠네요.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.