Hello All,
First of all, thank you all the effort what you put to this project.
I bought a HP ProLiant DL380e Gen8 Server for NAS. This version can hold 14pcs of 3,5" drives and has a HP Smart Array P420 Controller. My original plan was to create a HW level Raid 5 array from 3TB disks and install the DSM on it.
...but unfortunately the DSM installer does not find the array during the installation.
Is there any trick, tip or workaround to make it ha
you can open the extra.lzma with 7zip and check rc.modules and the *.ko files in "modules"
HPE uses broadcom or intel and both are there
you can also use iLO's virtual com port to check you the serial console using putty, that would give you a hint about whats going on
i tested the hpsa.ko driver with a p410 lately, the p410 can only use raid mode so i created a raid0 and raid5 to test if its working and it did, so maybe start with that
in theory the p420 can be swit