hw transcoding fix v1.04b DS918+
Hi,
I removed the faulty i915 drivers from extra, you can download and test it here.
hw transcoding is working but performance is low on both videostation and plex but I don't think is related to the loader.
on ASRock j4205-ITX you have to unplug any monitor before using hw transcoding otherwise the system will reboot, this one might be due to /dev/dri permissions or the DP to hdmi coverter on this board.
reboot/shutdown is working properly again.
I recommend doin
yes, but I think the problem isn't in your etxtra.lzma.
I used "video=eDP:d video=DP-1:d video=HDMI-A-1:d video=HDMI-A-2:d" for clean intstall and I think the problem is in this setting.
The same problem was with my extra.lzma. I deleted this line and it all worked.
The difference in my extra.lzma is that I have deleted all optional modules.
There are three options, I need to set all to "UEFI only"?
My bios config: version: 1.80
CP