Jump to content
XPEnology Community

hwmon kernel driver


IG-88

Recommended Posts

Thanks a lot, @IG-88

I think its worth mentioning that bus driver i2c-piix4.ko (if it was build by my request) - is patched version for HP. I'm not sure it will perfectly work on other systems.

Other than that - modules that are relevant to my HP N54L got loaded properly and work normal  (jc42,k10temp,w83795)!

I will need to double check ranges and sensors settings though.

Next step - will be thinking of best way to load this on boot. I'm still quite new to DSM 6, will be updating myself on its init procedure.

 

Console output  
w83795adg-i2c-1-2f
Adapter: SMBus PIIX4 adapter port 2 at 0b00
Vcore:        +1.19 V  (min =  +0.00 V, max =  +2.05 V)
Vdimm:        +1.51 V  (min =  +0.00 V, max =  +2.05 V)
in12:         +3.29 V  (min =  +0.00 V, max =  +6.14 V)
in13:         +3.23 V  (min =  +0.00 V, max =  +6.14 V)
System Fan:  1052 RPM  (min =  329 RPM)
CPU Temp:     +70.2 C  (high = +109.0 C, hyst = +109.0 C)
                       (crit = +109.0 C, hyst = +109.0 C)  sensor = thermal diode
NB Temp:      +49.0 C  (high = +105.0 C, hyst = +105.0 C)
                       (crit = +105.0 C, hyst = +105.0 C)  sensor = thermal diode
MB Temp:      +34.8 C  (high = +39.0 C, hyst = +39.0 C)
                       (crit = +44.0 C, hyst = +44.0 C)  sensor = thermistor

k10temp-pci-00c3
Adapter: PCI adapter
CPU Temp:     +75.5 C  (high = +70.0 C)
                       (crit = +100.0 C, hyst = +95.0 C)

jc42-i2c-0-18
Adapter: SMBus PIIX4 adapter port 0 at 0b00
RAM1 Temp:    +44.8 C  (low  =  +0.0 C)                  ALARM (HIGH, CRIT)
                       (high =  +0.0 C, hyst =  +0.0 C)
                       (crit =  +0.0 C, hyst =  +0.0 C)

 

Hide  

 

Edited by latonita
  • Thanks 1
Link to comment
Share on other sites

hi,

 

i think the best way to distribute this would be a *.spk package like the power button package as it is very specific

best to ask @wer on how to create it (what you have in mind looks simillar) - if there is enough interest other then a small howto with a link to the files needed

 

 

  • Like 1
Link to comment
Share on other sites

1 hour ago, withwolf1987 said:

Thank you for the work.

What else do I need to see CPU temperature or FAN speed?
 

I have a AMD Athlon II X2 250 with a Gigabyte motherboard. I think your driver should work with my hardware.


Thanks for advice.

 

Fore some reason the edit function is not working.

I sorted it out.

What would be really nice is a Gadget in the Web interface :)

Link to comment
Share on other sites

On 2/9/2018 at 3:57 AM, IG-88 said:

hi,

 

as some people requested hwmon kernel drivers and they do not fit the extra.lzma (yet) and we need some testing here we go

...

 

for 3615, DSM 6.1

 

i2c-piix4.ko 21.3 kB · 31 downloads

jc42.ko 13.2 kB · 21 downloads

k10temp.ko 9.42 kB · 31 downloads

nct6775.ko 108.62 kB · 35 downloads

w83795.ko 79.6 kB · 25 downloads

 

Hi,

 

Do we have a version for 6.2.3?

Just tried on HP N54L and I get "invalid module format", from dmesg I see this: 

 

i2c_piix4: version magic '3.10.102 SMP mod_unload ' should be '3.10.105 SMP mod_unload '

 

So we need this to be compiled with newer kernel again?

Link to comment
Share on other sites

  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...