Jump to content
XPEnology Community

From DS918+ to HP Microserver gen 10?


JanHoedt

Recommended Posts

  • 2 years later...

What went wrong with your installation? Try first with another disk (not one of the four from 918+) and when you can install 6.2.1 and log in, shut down and put the 4 disks from 918+. System detects that hdd come from another Synology box and makes a migration. This is the easy part.

Link to comment
Share on other sites

8 minutes ago, endormmc said:

What went wrong with your installation? Try first with another disk (not one of the four from 918+) and when you can install 6.2.1 and log in, shut down and put the 4 disks from 918+. System detects that hdd come from another Synology box and makes a migration. This is the easy part.

Please read this: 

It can be very helpful to you.....

Link to comment
Share on other sites

  • 3 weeks later...
  • 1 month later...
On 4/3/2020 at 10:38 PM, smoothmove said:
On 3/18/2020 at 7:17 PM, MichaelM said:

Well I have errors.. - screenshot 

I changed VID/PID/MAC as needed. Only i don't have information in "hardware IDs tab... - screenshot.

Any idea ? Can some one help me ?

 

Thanks1819357870_ScreenShot2020-03-18at7_12_19PM.thumb.png.cc3daab972b981b4e66d55ba2bffbba0.png537061346_ScreenShot2020-03-18at7_12_28PM.thumb.png.c1012b2c01ad29800e351eb23f6ab633.png1632575424_ScreenShot2020-03-18at7_13_48PM.thumb.png.a298b382ba52c060534b3b5cc5e29ccd.png1891318091_ScreenShot2020-03-18at7_14_50PM.png.48f5312ebafb18a523632cd0a9c46eb6.png1638904226_ScreenShot2020-03-18at7_15_21PM.png.1414a60f3d723293071e79c6ff5d3cd9.png


i have had the same when moving. 
 

Steps:

- don’t use the onboard USB 2.0 port internal. Use a USB 3.0

port on the backside of the Gen10. 
- configure the BIOS to boot from USB stick partion 1. Unselect partition 2. 
- if you use clean (new or test) disks first to try; make sure to boot into UFI shell. Type “RAID”. 
in the marvel config util verify disk mode is set to AHCI. 
clear any RAID configs on each disk. 
 

Edited by SteveMcQueen69
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...