ravosa

Acer Aspire H340 und XPEnology OS

Recommended Posts

49 minutes ago, Big_11 said:

"Powerbutton" spk ist installiert?... 

 

das hilft beim Herunterfahren über die DSM Oberfläche?

Ich ging davon aus, dass die nur die Ansteuerung des Hardware-Power-Buttons verbessert.

 

Ich melde mich hierzu wenn ich das Addon installieren konnte und die beiden Treiber-Files ausgetauscht habe.

Edited by Dreadnought

Share this post


Link to post
Share on other sites
1 hour ago, Dreadnought said:

 hast du vielleicht eine Idee ob das an dem Treiberpaket liegt oder an etwas anderem?

 

schau dir mal das log an ob irgend ein treiber beim laden abstürzt

ansonsten wüsste ich nichts in der richtung, wüsste hier keine ursache ohne ohne das wird es schwer es zu beheben

 

57 minutes ago, Big_11 said:

"Powerbutton" spk ist installiert?... 

 

die treiber evdev.ko and button.ko werden zumindest auch ohne das paket immer geladen

 

18 minutes ago, Dreadnought said:

Ich melde mich hierzu wenn ich das Addon installieren konnte und die beiden Treiber-Files ausgetauscht habe.

 

das plugin berücksichtigt 6.2.2 nicht, es werden beim istallieren veraltete treiber datein von 6.2.0 einkopiert, die man nach der installation wieder manuell entfernen muss

https://xpenology.com/forum/topic/7195-power-button-package/?do=findComment&comment=129613

 

Share this post


Link to post
Share on other sites

hier mal ein Ausschnitt aus dmesg

 

Spoiler

[    0.163115] ACPI: Added _OSI(Module Device)
[    0.163122] ACPI: Added _OSI(Processor Device)
[    0.163127] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.163131] ACPI: Added _OSI(Processor Aggregator Device)
[    0.164405] ACPI: EC: Look up EC in DSDT
[    0.168107] ACPI: Interpreter enabled
[    0.168125] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130328/hwxface-568)
[    0.168143] ACPI: (supports S0 S5)
[    0.168148] ACPI: Using IOAPIC for interrupt routing
[    0.168240] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.168240] ACPI: No dock devices found.
[    0.185111] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.185265] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20130328/nspredef-307)
[    0.185281] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.185284] _OSC request data:1 8 0 
[    0.185431] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20130328/nspredef-307)
[    0.185445] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.185448] _OSC request data:1 18 0 
[    0.185459] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.185465] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.188402] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.188481] PCI host bridge to bus 0000:00
[    0.188481] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.188481] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.188481] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.188481] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.188481] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.188481] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.188481] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.188481] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebffbff]
[    0.188481] pci_bus 0000:00: root bus resource [io  0x0d00-0xfdff]
[    0.188481] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.188481] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[    0.189178] pci 0000:00:02.0: [8086:2772] type 00 class 0x030000
[    0.189178] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf007ffff]
[    0.189178] pci 0000:00:02.0: reg 14: [io  0x18d0-0x18d7]
[    0.189178] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[    0.189178] pci 0000:00:02.0: reg 1c: [mem 0xf0080000-0xf00bffff]
[    0.189321] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.189321] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.189333] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.190071] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.190158] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.190158] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.190158] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.190179] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.190296] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.190367] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.190367] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.190367] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.191067] pci 0000:00:1c.4: [8086:27e0] type 01 class 0x060400
[    0.191087] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.191206] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.191297] pci 0000:00:1c.5: [8086:27e2] type 01 class 0x060400
[    0.191297] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.191305] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.192065] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.192120] pci 0000:00:1d.0: reg 20: [io  0x1820-0x183f]
[    0.192120] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.192141] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.192153] pci 0000:00:1d.1: reg 20: [io  0x1840-0x185f]
[    0.192329] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.192398] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.192398] pci 0000:00:1d.2: reg 20: [io  0x1860-0x187f]
[    0.192398] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.193043] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.193094] pci 0000:00:1d.3: reg 20: [io  0x1880-0x189f]
[    0.193264] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.193364] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.193364] pci 0000:00:1d.7: reg 10: [mem 0xf02c0000-0xf02c03ff]
[    0.193364] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.193364] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.194067] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.194072] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.194171] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.194206] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.194226] pci 0000:00:1f.0: address space collision: [io  0x1000-0x107f] conflicts with ACPI PM1a_EVT_BLK [??? 0x00001000-0x00001003 flags 0x80000000]
[    0.194236] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.194246] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0800 (mask 007f)
[    0.194438] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.198261] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 11 14 15) *7, disabled.
[    0.198415] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10 11 14 15), disabled.
[    0.198566] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 *11 14 15), disabled.
[    0.198722] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *10 11 14 15), disabled.
[    0.198880] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled.
[    0.199088] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled.
[    0.199250] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled.
[    0.199409] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 11 14 15) *5, disabled.
[    0.200111] ACPI: Enabled 5 GPEs in block 00 to 1F
[    0.200135] acpi root: \_SB_.PCI0 notify handler is installed
[    0.200219] Found 1 acpi root devices
[    0.201056] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.201070] vgaarb: loaded
[    0.201075] vgaarb: bridge control possible 0000:00:02.0
[    0.201075] SCSI subsystem initialized
[    0.201075] ACPI: bus type ATA registered
[    0.201085] libata version 3.00 loaded.
[    0.202075] pps_core: LinuxPPS API ver. 1 registered
[    0.202075] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.202077] PTP clock support registered
[    0.202085] PCI: Using ACPI for IRQ routing
[    0.202085] PCI: pci_cache_line_size set to 64 bytes
[    0.202153] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.202159] e820: reserve RAM buffer [mem 0x7f5e0000-0x7fffffff]
[    0.203408] hpet clockevent registered
[    0.203427] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.203461] Switching to clocksource hpet
[    0.203461] AppArmor: AppArmor Filesystem Enabled
[    0.203468] pnp: PnP ACPI init
[    0.203495] ACPI: bus type PNP registered
[    7.319468] brd: module loaded
[    7.352146] ACPI Warning: 0x0000000000001028-0x000000000000102F SystemIO conflicts with Region \_SB_.PCI0.LPC0.PMIO 1 (20130328/utaddress-249)
[    7.352170] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.352179] Unknown LPC device 27b8
[    7.352188] ACPI Warning: 0x0000000000001180-0x00000000000011AF SystemIO conflicts with Region \_SB_.PCI0.LPC0.GPOX 1 (20130328/utaddress-249)
[    7.352201] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.365944] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   40.707472] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input0
[   40.707492] ACPI: Power Button [PWRB]
[   40.707668] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[   40.707681] ACPI: Power Button [PWRF]

 

 

@IG-88 liegt es vielleicht an der Stelle: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] 

Ich habe den Auszug gemacht bevor ich das PowerButton Package installiert habe.

 

Hier mal der komplette Auszug:

 

Spoiler

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.105 (root@build1) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #24922 SMP Wed Jul 3 16:35:54 CST 2019
[    0.000000] Command line: syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=xxx mac1=xx netif_num=1 vid=0x058f pid=0x6387
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000cc000-0x00000000000cffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f5dffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f5e0000-0x000000007f5e7fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f5e8000-0x000000007f5e8fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f5e9000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: Acer              Aspire easyStore H340 /WG945GCM         , BIOS P03     02/03/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f5e0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 080000000 write-back
[    0.000000]   1 base 07F600000 mask 0FFE00000 uncachable
[    0.000000]   2 base 07F800000 mask 0FF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] found SMP MP-table at [mem 0x000f7820-0x000f782f] mapped at [ffff8800000f7820]
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01acb000, 0x01acbfff] PGTABLE
[    0.000000] BRK [0x01acc000, 0x01accfff] PGTABLE
[    0.000000] BRK [0x01acd000, 0x01acdfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7f200000-0x7f3fffff]
[    0.000000]  [mem 0x7f200000-0x7f3fffff] page 2M
[    0.000000] BRK [0x01ace000, 0x01acefff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7c000000-0x7f1fffff]
[    0.000000]  [mem 0x7c000000-0x7f1fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x7bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x7f400000-0x7f5dffff]
[    0.000000]  [mem 0x7f400000-0x7f5dffff] page 4k
[    0.000000] BRK [0x01acf000, 0x01acffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x364ea000-0x37ffffff]
[    0.000000] ACPI: RSDP 0x00000000000F77F0 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 0x000000007F5E2DF7 00044 (v01 PTLTD  ? XSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 0x000000007F5E7E40 000F4 (v03 INTEL           06040000 PTL  00000003)
[    0.000000] ACPI: DSDT 0x000000007F5E2E3B 04F91 (v01 INTEL  LAKEPORT 06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 0x000000007F5E8FC0 00040
[    0.000000] ACPI: MCFG 0x000000007F5E7F34 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
[    0.000000] ACPI: APIC 0x000000007F5E7F70 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 0x000000007F5E7FD8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007cc00000-ffff88007e7fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x7f5dffff]
[    0.000000] On node 0 totalpages: 521596
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7077 pages used for memmap
[    0.000000]   DMA32 zone: 517600 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000cc000
[    0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] e820: [mem 0x80000000-0xfebfffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88007f200000 s76864 r8192 d21440 u1048576
[    0.000000] pcpu-alloc: s76864 r8192 d21440 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 514442
[    0.000000] Kernel command line: syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=xxx mac1=xx netif_num=1 vid=0x058f pid=0x6387
[    0.000000] Power on seq num: 0
[    0.000000] Synology Hardware Version: DS3615xs-j
[    0.000000] Vender format version: 2
[    0.000000] Serial Number: xx
[    0.000000] Mac1: xxx
[    0.000000] Internal netif num: 1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Memory: 2015428k/2086784k available (4936k kernel code, 400k absent, 70956k reserved, 3715k data, 792k init)
[    0.000000] Kernel/User page tables isolation: disabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:4352 nr_irqs:512 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 8388608 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1599.993 MHz processor
[    0.000008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.98 BogoMIPS (lpj=1599993)
[    0.000017] pid_max: default: 32768 minimum: 301
[    0.000125] Security Framework initialized
[    0.000157] AppArmor: AppArmor initialized
[    0.000189] Mount-cache hash table entries: 256
[    0.000665] Initializing cgroup subsys memory
[    0.000705] Initializing cgroup subsys devices
[    0.000710] Initializing cgroup subsys freezer
[    0.000714] Initializing cgroup subsys blkio
[    0.000774] Disabled fast string operations
[    0.000782] CPU: Physical Processor ID: 0
[    0.000786] CPU: Processor Core ID: 0
[    0.000790] mce: CPU supports 5 MCE banks
[    0.000805] CPU0: Thermal monitoring handled by SMI
[    0.000820] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
               Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
               tlb_flushall_shift: 6
[    0.000826] FEATURE SPEC_CTRL Not Present
[    0.000829] FEATURE IBPB_SUPPORT Not Present
[    0.000840] Spectre V2 : Vulnerable: Minimal ASM retpoline
[    0.000964] Freeing SMP alternatives: 24k freed
[    0.000987] ACPI: Core revision 20130328
[    0.001000] ACPI: All ACPI Tables successfully acquired
[    0.001000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.010269] smpboot: CPU0: Intel(R) Atom(TM) CPU  230   @ 1.60GHz (fam: 06, model: 1c, stepping: 02)
[    0.011000] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
[    0.011000] ... version:                3
[    0.011000] ... bit width:              40
[    0.011000] ... generic registers:      2
[    0.011000] ... value mask:             000000ffffffffff
[    0.011000] ... max period:             000000007fffffff
[    0.011000] ... fixed-purpose events:   3
[    0.011000] ... event mask:             0000000700000003
[    0.011144] smpboot: Booting Node   0, Processors  #1 OK
[    0.001000] Disabled fast string operations
[    0.001000] CPU0: Thermal monitoring enabled (TM1)
[    0.023110] Brought up 2 CPUs
[    0.023118] smpboot: Total of 2 processors activated (6399.97 BogoMIPS)
[    0.023568] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.024210] devtmpfs: initialized
[    0.024503] PM: Registering ACPI NVS region [mem 0x7f5e8000-0x7f5e8fff] (4096 bytes)
[    0.025085] xor: measuring software checksum speed
[    0.034687]    prefetch64-sse:  5424.000 MB/sec
[    0.044687]    generic_sse:  4904.000 MB/sec
[    0.044693] xor: using function: prefetch64-sse (5424.000 MB/sec)
[    0.044835] NET: Registered protocol family 16
[    0.046225] ACPI: bus type PCI registered
[    0.046252] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.046252] PCI: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support
[    0.046252] PCI: not using MMCONFIG
[    0.046252] PCI: Using configuration type 1 for base access
[    0.061120] bio: create slab <bio-0> at 0
[    0.078409] raid6: sse2x1   gen()   109 MB/s
[    0.095022] raid6: sse2x1   xor()   707 MB/s
[    0.112083] raid6: sse2x2   gen()   371 MB/s
[    0.129024] raid6: sse2x2   xor()  1173 MB/s
[    0.146087] raid6: sse2x4   gen()   742 MB/s
[    0.163019] raid6: sse2x4   xor()  1314 MB/s
[    0.163024] raid6: using algorithm sse2x4 gen() (742 MB/s)
[    0.163027] raid6: .... xor() 1314 MB/s, rmw enabled
[    0.163031] raid6: using ssse3x2 recovery algorithm
[    0.163115] ACPI: Added _OSI(Module Device)
[    0.163122] ACPI: Added _OSI(Processor Device)
[    0.163127] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.163131] ACPI: Added _OSI(Processor Aggregator Device)
[    0.164405] ACPI: EC: Look up EC in DSDT
[    0.168107] ACPI: Interpreter enabled
[    0.168125] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130328/hwxface-568)
[    0.168143] ACPI: (supports S0 S5)
[    0.168148] ACPI: Using IOAPIC for interrupt routing
[    0.168240] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.168240] ACPI: No dock devices found.
[    0.185111] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.185265] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20130328/nspredef-307)
[    0.185281] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.185284] _OSC request data:1 8 0 
[    0.185431] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20130328/nspredef-307)
[    0.185445] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.185448] _OSC request data:1 18 0 
[    0.185459] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.185465] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.188402] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.188481] PCI host bridge to bus 0000:00
[    0.188481] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.188481] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.188481] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.188481] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.188481] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.188481] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.188481] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.188481] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebffbff]
[    0.188481] pci_bus 0000:00: root bus resource [io  0x0d00-0xfdff]
[    0.188481] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.188481] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[    0.189178] pci 0000:00:02.0: [8086:2772] type 00 class 0x030000
[    0.189178] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf007ffff]
[    0.189178] pci 0000:00:02.0: reg 14: [io  0x18d0-0x18d7]
[    0.189178] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[    0.189178] pci 0000:00:02.0: reg 1c: [mem 0xf0080000-0xf00bffff]
[    0.189321] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.189321] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.189333] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.190071] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.190158] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.190158] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.190158] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.190179] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.190296] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.190367] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.190367] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.190367] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.191067] pci 0000:00:1c.4: [8086:27e0] type 01 class 0x060400
[    0.191087] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.191206] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.191297] pci 0000:00:1c.5: [8086:27e2] type 01 class 0x060400
[    0.191297] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.191305] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.192065] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.192120] pci 0000:00:1d.0: reg 20: [io  0x1820-0x183f]
[    0.192120] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.192141] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.192153] pci 0000:00:1d.1: reg 20: [io  0x1840-0x185f]
[    0.192329] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.192398] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.192398] pci 0000:00:1d.2: reg 20: [io  0x1860-0x187f]
[    0.192398] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.193043] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.193094] pci 0000:00:1d.3: reg 20: [io  0x1880-0x189f]
[    0.193264] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.193364] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.193364] pci 0000:00:1d.7: reg 10: [mem 0xf02c0000-0xf02c03ff]
[    0.193364] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.193364] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.194067] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.194072] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.194171] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.194206] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.194226] pci 0000:00:1f.0: address space collision: [io  0x1000-0x107f] conflicts with ACPI PM1a_EVT_BLK [??? 0x00001000-0x00001003 flags 0x80000000]
[    0.194236] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.194246] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0800 (mask 007f)
[    0.194438] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.194438] pci 0000:00:1f.2: reg 10: [io  0x18e8-0x18ef]
[    0.194438] pci 0000:00:1f.2: reg 14: [io  0x18dc-0x18df]
[    0.194438] pci 0000:00:1f.2: reg 18: [io  0x18e0-0x18e7]
[    0.194438] pci 0000:00:1f.2: reg 1c: [io  0x18d8-0x18db]
[    0.194438] pci 0000:00:1f.2: reg 20: [io  0x18c0-0x18cf]
[    0.194438] pci 0000:00:1f.2: reg 24: [mem 0xf02c0400-0xf02c07ff]
[    0.194438] pci 0000:00:1f.2: PME# supported from D3hot
[    0.195094] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.195156] pci 0000:00:1f.3: reg 20: [io  0x18a0-0x18bf]
[    0.195338] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.195338] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.195338] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.195338] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.196053] pci 0000:00:1c.1: PCI bridge to [bus 04]
[    0.196063] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.196071] pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x805fffff]
[    0.196082] pci 0000:00:1c.1:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.196170] pci 0000:00:1c.2: PCI bridge to [bus 06]
[    0.196170] pci 0000:00:1c.2:   bridge window [io  0x6000-0x6fff]
[    0.196170] pci 0000:00:1c.2:   bridge window [mem 0x80800000-0x809fffff]
[    0.196170] pci 0000:00:1c.2:   bridge window [mem 0x80a00000-0x80bfffff 64bit pref]
[    0.196202] pci 0000:00:1c.3: PCI bridge to [bus 08]
[    0.196202] pci 0000:00:1c.3:   bridge window [io  0x7000-0x7fff]
[    0.196202] pci 0000:00:1c.3:   bridge window [mem 0x80c00000-0x80dfffff]
[    0.196202] pci 0000:00:1c.3:   bridge window [mem 0x80e00000-0x80ffffff 64bit pref]
[    0.196202] pci 0000:09:00.0: [11ab:436b] type 00 class 0x020000
[    0.196202] pci 0000:09:00.0: reg 10: [mem 0xf0300000-0xf0303fff 64bit]
[    0.196202] pci 0000:09:00.0: reg 18: [io  0x2000-0x20ff]
[    0.196202] pci 0000:09:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.196263] pci 0000:09:00.0: supports D1 D2
[    0.196270] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.197054] pci 0000:00:1c.4: PCI bridge to [bus 09]
[    0.197065] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.197073] pci 0000:00:1c.4:   bridge window [mem 0xf0300000-0xf03fffff]
[    0.197084] pci 0000:00:1c.4:   bridge window [mem 0x81000000-0x811fffff 64bit pref]
[    0.197116] pci 0000:0a:00.0: [11ab:6121] type 00 class 0x01018f
[    0.197140] pci 0000:0a:00.0: reg 10: [io  0x3020-0x3027]
[    0.197157] pci 0000:0a:00.0: reg 14: [io  0x3014-0x3017]
[    0.197174] pci 0000:0a:00.0: reg 18: [io  0x3018-0x301f]
[    0.197191] pci 0000:0a:00.0: reg 1c: [io  0x3010-0x3013]
[    0.197208] pci 0000:0a:00.0: reg 20: [io  0x3000-0x300f]
[    0.197225] pci 0000:0a:00.0: reg 24: [mem 0xf0400000-0xf04003ff]
[    0.197302] pci 0000:0a:00.0: supports D1
[    0.197308] pci 0000:0a:00.0: PME# supported from D0 D1 D3hot
[    0.197419] pci 0000:00:1c.5: PCI bridge to [bus 0a]
[    0.197419] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
[    0.197419] pci 0000:00:1c.5:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.197419] pci 0000:00:1c.5:   bridge window [mem 0x81200000-0x813fffff 64bit pref]
[    0.198095] pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)
[    0.198112] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.198119] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.198125] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.198131] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.198137] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.198143] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.198149] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebffbff] (subtractive decode)
[    0.198155] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xfdff] (subtractive decode)
[    0.198161] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.198201] pci_bus 0000:00: on NUMA node 0
[    0.198261] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 11 14 15) *7, disabled.
[    0.198415] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10 11 14 15), disabled.
[    0.198566] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 *11 14 15), disabled.
[    0.198722] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *10 11 14 15), disabled.
[    0.198880] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled.
[    0.199088] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled.
[    0.199250] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled.
[    0.199409] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 11 14 15) *5, disabled.
[    0.200111] ACPI: Enabled 5 GPEs in block 00 to 1F
[    0.200135] acpi root: \_SB_.PCI0 notify handler is installed
[    0.200219] Found 1 acpi root devices
[    0.201056] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.201070] vgaarb: loaded
[    0.201075] vgaarb: bridge control possible 0000:00:02.0
[    0.201075] SCSI subsystem initialized
[    0.201075] ACPI: bus type ATA registered
[    0.201085] libata version 3.00 loaded.
[    0.202075] pps_core: LinuxPPS API ver. 1 registered
[    0.202075] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.202077] PTP clock support registered
[    0.202085] PCI: Using ACPI for IRQ routing
[    0.202085] PCI: pci_cache_line_size set to 64 bytes
[    0.202153] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.202159] e820: reserve RAM buffer [mem 0x7f5e0000-0x7fffffff]
[    0.203408] hpet clockevent registered
[    0.203427] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.203461] Switching to clocksource hpet
[    0.203461] AppArmor: AppArmor Filesystem Enabled
[    0.203468] pnp: PnP ACPI init
[    0.203495] ACPI: bus type PNP registered
[    0.204125] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.204135] system 00:00: [io  0x1000-0x107f] could not be reserved
[    0.204143] system 00:00: [io  0x1180-0x11bf] has been reserved
[    0.204150] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.204156] system 00:00: [io  0xfe00] has been reserved
[    0.204165] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.204172] system 00:00: [mem 0xfed13000-0xfed13fff] has been reserved
[    0.204181] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.204188] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.204194] system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved
[    0.204204] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.204243] pnp 00:01: [dma 4]
[    0.204404] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.204590] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.204831] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.204998] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.205551] pnp 00:05: Plug and Play ACPI device, IDs INT0800 (active)
[    0.205758] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.205943] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.206621] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.206811] pnp: PnP ACPI: found 9 devices
[    0.206817] ACPI: bus type PNP unregistered
[    0.224437] pci 0000:00:1f.0: BAR 13: [io  0x1000-0x107f] has bogus alignment
[    0.224449] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.224459] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.224469] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.224477] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.224489] pci 0000:00:1c.1: PCI bridge to [bus 04]
[    0.224496] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.224504] pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x805fffff]
[    0.224513] pci 0000:00:1c.1:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.224523] pci 0000:00:1c.2: PCI bridge to [bus 06]
[    0.224530] pci 0000:00:1c.2:   bridge window [io  0x6000-0x6fff]
[    0.224538] pci 0000:00:1c.2:   bridge window [mem 0x80800000-0x809fffff]
[    0.224546] pci 0000:00:1c.2:   bridge window [mem 0x80a00000-0x80bfffff 64bit pref]
[    0.224556] pci 0000:00:1c.3: PCI bridge to [bus 08]
[    0.224563] pci 0000:00:1c.3:   bridge window [io  0x7000-0x7fff]
[    0.224572] pci 0000:00:1c.3:   bridge window [mem 0x80c00000-0x80dfffff]
[    0.224580] pci 0000:00:1c.3:   bridge window [mem 0x80e00000-0x80ffffff 64bit pref]
[    0.224596] pci 0000:09:00.0: BAR 6: assigned [mem 0x81000000-0x8101ffff pref]
[    0.224603] pci 0000:00:1c.4: PCI bridge to [bus 09]
[    0.224610] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.224619] pci 0000:00:1c.4:   bridge window [mem 0xf0300000-0xf03fffff]
[    0.224627] pci 0000:00:1c.4:   bridge window [mem 0x81000000-0x811fffff 64bit pref]
[    0.224638] pci 0000:00:1c.5: PCI bridge to [bus 0a]
[    0.224644] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
[    0.224653] pci 0000:00:1c.5:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.224661] pci 0000:00:1c.5:   bridge window [mem 0x81200000-0x813fffff 64bit pref]
[    0.224671] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[    0.226050] pci 0000:00:1e.0: setting latency timer to 64
[    0.226061] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.226067] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    0.226073] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
[    0.226079] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.226085] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.226091] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[    0.226097] pci_bus 0000:00: resource 10 [mem 0x80000000-0xfebffbff]
[    0.226103] pci_bus 0000:00: resource 11 [io  0x0d00-0xfdff]
[    0.226109] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
[    0.226115] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.226121] pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff]
[    0.226127] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.226133] pci_bus 0000:04: resource 0 [io  0x5000-0x5fff]
[    0.226139] pci_bus 0000:04: resource 1 [mem 0x80400000-0x805fffff]
[    0.226145] pci_bus 0000:04: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.226151] pci_bus 0000:06: resource 0 [io  0x6000-0x6fff]
[    0.226157] pci_bus 0000:06: resource 1 [mem 0x80800000-0x809fffff]
[    0.226163] pci_bus 0000:06: resource 2 [mem 0x80a00000-0x80bfffff 64bit pref]
[    0.226170] pci_bus 0000:08: resource 0 [io  0x7000-0x7fff]
[    0.226176] pci_bus 0000:08: resource 1 [mem 0x80c00000-0x80dfffff]
[    0.226182] pci_bus 0000:08: resource 2 [mem 0x80e00000-0x80ffffff 64bit pref]
[    0.226189] pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
[    0.226194] pci_bus 0000:09: resource 1 [mem 0xf0300000-0xf03fffff]
[    0.226201] pci_bus 0000:09: resource 2 [mem 0x81000000-0x811fffff 64bit pref]
[    0.226207] pci_bus 0000:0a: resource 0 [io  0x3000-0x3fff]
[    0.226212] pci_bus 0000:0a: resource 1 [mem 0xf0400000-0xf04fffff]
[    0.226218] pci_bus 0000:0a: resource 2 [mem 0x81200000-0x813fffff 64bit pref]
[    0.226225] pci_bus 0000:0b: resource 4 [io  0x0000-0x0cf7]
[    0.226231] pci_bus 0000:0b: resource 5 [mem 0x000a0000-0x000bffff]
[    0.226237] pci_bus 0000:0b: resource 6 [mem 0x000d0000-0x000d3fff]
[    0.226242] pci_bus 0000:0b: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.226248] pci_bus 0000:0b: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.226254] pci_bus 0000:0b: resource 9 [mem 0x000e0000-0x000e3fff]
[    0.226260] pci_bus 0000:0b: resource 10 [mem 0x80000000-0xfebffbff]
[    0.226266] pci_bus 0000:0b: resource 11 [io  0x0d00-0xfdff]
[    0.226272] pci_bus 0000:0b: resource 12 [mem 0xfed40000-0xfed44fff]
[    0.226385] NET: Registered protocol family 2
[    0.226888] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[    0.227096] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.227258] TCP: Hash tables configured (established 16384 bind 16384)
[    0.227396] TCP: reno registered
[    0.227414] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.227448] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.227686] NET: Registered protocol family 1
[    0.228054] RPC: Registered named UNIX socket transport module.
[    0.228064] RPC: Registered udp transport module.
[    0.228069] RPC: Registered tcp transport module.
[    0.228074] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.228104] pci 0000:00:02.0: Boot video device
[    0.230375] PCI: CLS 32 bytes, default 64
[    0.230509] Trying to unpack rootfs image as initramfs...
[    2.610796] Freeing initrd memory: 27736k freed
[    2.640200] tott: module verification failed: signature and/or required key missing - tainting kernel
[    2.678538] Simple Boot Flag at 0x36 set to 0x1
[    2.731317] Initialise module verification
[    2.731483] audit: initializing netlink socket (disabled)
[    2.731522] type=2000 audit(1578743652.730:1): initialized
[    2.773245] bounce pool size: 64 pages
[    2.787408] VFS: Disk quotas dquot_6.5.2
[    2.787494] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.793505] NFS: Registering the id_resolver key type
[    2.793551] Key type id_resolver registered
[    2.793558] Key type id_legacy registered
[    2.793619] msgmni has been set to 3990
[    2.796955] async_tx: api initialized (async)
[    2.796969] Key type asymmetric registered
[    2.796975] Asymmetric key parser 'x509' registered
[    2.797380] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    2.797391] io scheduler noop registered
[    2.797396] io scheduler deadline registered
[    2.797431] io scheduler cfq registered (default)
[    3.680079] tsc: Refined TSC clocksource calibration: 1600.056 MHz
[    3.680096] Switching to clocksource tsc
[    6.898298] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    6.927318] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    6.941365] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250
[    7.319468] brd: module loaded
[    7.352146] ACPI Warning: 0x0000000000001028-0x000000000000102F SystemIO conflicts with Region \_SB_.PCI0.LPC0.PMIO 1 (20130328/utaddress-249)
[    7.352170] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.352179] Unknown LPC device 27b8
[    7.352188] ACPI Warning: 0x0000000000001180-0x00000000000011AF SystemIO conflicts with Region \_SB_.PCI0.LPC0.GPOX 1 (20130328/utaddress-249)
[    7.352201] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.365944] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.399368] Loading iSCSI transport class v2.0-870.
[    7.590329] rdac: device handler registered
[    7.635498] ahci 0000:00:1f.2: version 3.0
[    7.636055] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    7.636260] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    7.636275] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
[    7.636292] ahci 0000:00:1f.2: setting latency timer to 64
[    7.730308] scsi0 : ahci
[    7.749828] scsi1 : ahci
[    7.772006] scsi2 : ahci
[    7.796419] scsi3 : ahci
[    7.807521] ata1: SATA max UDMA/133 abar m1024@0xf02c0400 port 0xf02c0500 irq 40
[    7.807535] ata2: SATA max UDMA/133 abar m1024@0xf02c0400 port 0xf02c0580 irq 40
[    7.807543] ata3: SATA max UDMA/133 abar m1024@0xf02c0400 port 0xf02c0600 irq 40
[    7.807551] ata4: SATA max UDMA/133 abar m1024@0xf02c0400 port 0xf02c0680 irq 40
[    7.807862] ahci 0000:0a:00.0: Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.
[    7.807881] ahci 0000:0a:00.0: controller can't do NCQ, turning off CAP_NCQ
[    7.807889] ahci 0000:0a:00.0: controller can't do PMP, turning off CAP_PMP
[    7.807897] ahci 0000:0a:00.0: masking port_map 0x7 -> 0x3
[    7.807990] ahci: SSS flag set, parallel bus scan disabled
[    7.808101] ahci 0000:0a:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl IDE mode
[    7.808115] ahci 0000:0a:00.0: flags: 64bit stag led slum part 
[    7.875204] scsi4 : ahci
[    7.892428] scsi5 : ahci
[    7.914597] scsi6 : ahci
[    7.923631] ata5: SATA max UDMA/133 abar m1024@0xf0400000 port 0xf0400100 irq 17
[    7.923646] ata6: SATA max UDMA/133 abar m1024@0xf0400000 port 0xf0400180 irq 17
[    7.923653] ata7: DUMMY
[    7.981458] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    7.988041] serio: i8042 KBD port at 0x60,0x64 irq 1
[    7.988074] serio: i8042 AUX port at 0x60,0x64 irq 12
[    7.995960] rtc_cmos 00:03: RTC can wake from S4
[    8.008631] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    8.008688] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    8.023381] i2c /dev entries driver
[    8.058361] md: linear personality registered for level -1
[    8.058373] md: raid0 personality registered for level 0
[    8.058379] md: raid1 personality registered for level 1
[    8.058384] md: raid10 personality registered for level 10
[    8.069312] md: raid6 personality registered for level 6
[    8.069323] md: raid5 personality registered for level 5
[    8.069328] md: raid4 personality registered for level 4
[    8.069333] md: raidF1 personality registered for level 45
[    8.078345] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    8.078360] cpuidle: using governor ladder
[    8.078366] cpuidle: using governor menu
[    8.078630] TCP: cubic registered
[    8.078643] NET: Registered protocol family 17
[    8.078737] Key type dns_resolver registered
[    8.114203] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    8.118110] ata2: SATA link down (SStatus 0 SControl 300)
[    8.120708] ata1.00: ATA-7: SAMSUNG HD161GJ, 1AC01118, max UDMA7
[    8.120718] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    8.120725] ata1.00: SN:S14DJ9AS711414
[    8.121094] ata3: SATA link down (SStatus 0 SControl 300)
[    8.124072] ata4: SATA link down (SStatus 0 SControl 300)
[    8.127319] ata1.00: configured for UDMA/133
[    8.134147] scsi 0:0:0:0: Direct-Access     SAMSUNG  HD161GJ                  1AC0 PQ: 0 ANSI: 5
[    8.158418] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    8.158664] sd 0:0:0:0: [sda] Write Protect is off
[    8.158676] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    8.158781] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.179338]  sda: sda1 sda2 sda3
[    8.221342] sd 0:0:0:0: [sda] Attached SCSI disk
[    8.230081] ata5: SATA link down (SStatus 0 SControl 300)
[    8.535045] ata6: SATA link down (SStatus 0 SControl 300)
[    8.535142] ata7: send port disabled event
[    8.539290] Loading module verification blacklist certificates
[    8.539295] Loading module verification certificates
[    8.539357] MODSIGN: Loaded cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[    8.545130] MODSIGN: Loaded cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[    8.545176] MODSIGN: Loaded cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[    8.545218] MODSIGN: Loaded cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[    8.545237] registered taskstats version 1
[    8.545857] rtc_cmos 00:03: setting system clock to 2020-01-11 11:54:19 UTC (1578743659)
[    8.547934] Freeing unused kernel memory: 792k freed
[    8.548547] Write protecting the kernel read-only data: 8192k
[    8.548974] Freeing unused kernel memory: 1196k freed
[    8.553285] Freeing unused kernel memory: 428k freed
[    8.786992] ACPI: bus type USB registered
[    8.790221] usbcore: registered new interface driver usbfs
[    8.793545] usbcore: registered new interface driver hub
[    8.799992] usbcore: registered new interface driver ethub
[    8.807893] usbcore: registered new device driver usb
[    8.867833] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    8.888814] ehci-pci: EHCI PCI platform driver
[    8.889331] ehci-pci 0000:00:1d.7: setting latency timer to 64
[    8.889367] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    8.889392] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    8.889424] ehci-pci 0000:00:1d.7: debug port 1
[    8.893362] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    8.893431] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf02c0000
[    8.899078] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    8.901338] hub 1-0:1.0: USB hub found
[    8.901376] hub 1-0:1.0: 8 ports detected
[    8.956502] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    9.001343] uhci_hcd: USB Universal Host Controller Interface driver
[    9.001808] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    9.001823] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    9.001850] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    9.001907] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    9.004720] hub 2-0:1.0: USB hub found
[    9.004760] hub 2-0:1.0: 2 ports detected
[    9.005431] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    9.005446] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    9.005472] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    9.005567] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    9.013804] hub 3-0:1.0: USB hub found
[    9.013840] hub 3-0:1.0: 2 ports detected
[    9.014532] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    9.014546] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    9.014579] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    9.014680] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    9.025366] hub 4-0:1.0: USB hub found
[    9.025395] hub 4-0:1.0: 2 ports detected
[    9.026048] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    9.026064] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    9.026090] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    9.026186] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    9.045632] hub 5-0:1.0: USB hub found
[    9.045666] hub 5-0:1.0: 2 ports detected
[    9.224107] usb 1-2: new high-speed USB device number 2 using ehci-pci
[    9.308250] usbcore: registered new interface driver usb-storage
[    9.372216] usb-storage 1-2:1.0: USB Mass Storage device detected
[    9.378144] scsi7 : usb-storage 1-2:1.0
[    9.413856] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    9.472986] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    9.515701] usb 1-8: new high-speed USB device number 3 using ehci-pci
[    9.533419] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013
[    9.565697] mpt2sas version 20.00.00.00 loaded
[    9.633312] Adaptec aacraid driver 1.2-0[30200]-ms
[    9.657494] usb-storage 1-8:1.0: USB Mass Storage device detected
[    9.666123] scsi8 : usb-storage 1-8:1.0
[    9.683911] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    9.751104] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    9.781598] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    9.811444] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    9.932127] isci: Intel(R) C600 SAS Controller Driver - version 1.1.0
[   10.065682] bromolow_synobios: module license 'Synology Inc.' taints kernel.
[   10.065691] Disabling lock debugging due to kernel taint
[   10.067067] 2020-1-11 11:54:20 UTC
[   10.067081] synobios: load, major number 201
[   10.067097] Brand: Synology
[   10.067104] Model: DS-3615xs
[   10.067112] set group disks wakeup number to 4, spinup time deno 7
[   10.067134] synobios cpu_arch proc entry initialized
[   10.067142] synobios crypto_hw proc entry initialized
[   10.067152] synobios syno_platform proc entry initialized
[   10.067190] synobios open /dev/ttyS1 success
[   10.096086] synobios: unload
[   10.134224] md: Autodetecting RAID arrays.
[   10.174215] md: invalid raid superblock magic on sda3
[   10.179274] md: sda3 does not have a valid v0.90 superblock, not importing!
[   10.179304] md: Scanned 3 and added 2 devices.
[   10.179308] md: autorun ...
[   10.179313] md: considering sda1 ...
[   10.179329] md:  adding sda1 ...
[   10.179338] md: sda2 has different UUID to sda1
[   10.179349] md: created md0
[   10.179354] md: bind<sda1>
[   10.179389] md: running: <sda1>
[   10.179946] md/raid1:md0: active with 1 out of 12 mirrors
[   10.211315] md0: detected capacity change from 0 to 2549940224
[   10.211643] md: considering sda2 ...
[   10.211665] md:  adding sda2 ...
[   10.215087] md: created md1
[   10.215100] md: bind<sda2>
[   10.215136] md: running: <sda2>
[   10.226576] md/raid1:md1: active with 1 out of 12 mirrors
[   10.244274] md1: detected capacity change from 0 to 2147418112
[   10.246947] md: ... autorun DONE.
[   10.310552]  md0: unknown partition table
[   10.397524] scsi 7:0:0:0: Direct-Access     Generic  Flash Disk               8.00 PQ: 0 ANSI: 4
[   10.403197] sd 7:0:0:0: [synoboot] 7901184 512-byte logical blocks: (4.04 GB/3.76 GiB)
[   10.404318] sd 7:0:0:0: [synoboot] Write Protect is off
[   10.404333] sd 7:0:0:0: [synoboot] Mode Sense: 23 00 00 00
[   10.405622] sd 7:0:0:0: [synoboot] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   10.436974]  synoboot: synoboot1 synoboot2 synoboot3
[   10.461594] sd 7:0:0:0: [synoboot] Attached SCSI removable disk
[   10.677519] scsi 8:0:0:0: Direct-Access     SMI      USB DISK                 1100 PQ: 0 ANSI: 0 CCS
[   10.681589] sd 8:0:0:0: [sdu] 501760 512-byte logical blocks: (256 MB/245 MiB)
[   10.682574] sd 8:0:0:0: [sdu] Write Protect is off
[   10.682589] sd 8:0:0:0: [sdu] Mode Sense: 43 00 00 00
[   10.683740] sd 8:0:0:0: [sdu] No Caching mode page found
[   10.689102] sd 8:0:0:0: [sdu] Assuming drive cache: write through
[   10.709821] sd 8:0:0:0: [sdu] No Caching mode page found
[   10.715158] sd 8:0:0:0: [sdu] Assuming drive cache: write through
[   10.730115]  sdu:
[   10.733962] sd 8:0:0:0: [sdu] No Caching mode page found
[   10.739326] sd 8:0:0:0: [sdu] Assuming drive cache: write through
[   10.745473] sd 8:0:0:0: [sdu] Attached SCSI disk
[   11.892027] EXT4-fs (md0): barriers disabled
[   11.907270] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: 
[   16.321241] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[   18.146421] EXT4-fs (md0): re-mounted. Opts: (null)
[   25.470695] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   25.470898] sd 7:0:0:0: Attached scsi generic sg1 type 0
[   25.471155] sd 8:0:0:0: Attached scsi generic sg2 type 0
[   25.765040] usb 1-8: reset high-speed USB device number 3 using ehci-pci
[   26.310351]  md1: unknown partition table
[   26.462322] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k 
[   26.989624] zram: module is from the staging directory, the quality is unknown, you have been warned.
[   26.991463] zram: Created 1 device(s) ...
[   27.040535] Adding 1227772k swap on /dev/zram0.  Priority:1 extents:1 across:1227772k SS
[   29.465970] NET: Registered protocol family 10
[   29.524948] sit: IPv6 over IPv4 tunneling driver
[   30.361890] init: syno-auth-check main process (5168) killed by TERM signal
[   31.707788] systemd-udevd[5363]: starting version 204
[   36.106593] fuse init (API version 7.22)
[   36.517844] dca service started, version 1.12.1
[   36.623760] e1000e: Intel(R) PRO/1000 Network Driver - 3.6.0-NAPI
[   36.623769] e1000e: Copyright(c) 1999 - 2019 Intel Corporation.
[   36.823262] Intel(R) Gigabit Ethernet Linux Driver - version 5.3.5.39
[   36.823272] Copyright(c) 2007 - 2019 Intel Corporation.
[   36.991965] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.6.3
[   36.991975] Copyright(c) 1999 - 2019 Intel Corporation.
[   37.117441] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 2.4.10
[   37.117452] i40e: Copyright(c) 2013 - 2018 Intel Corporation.
[   37.215827] tn40xx: Tehuti Network Driver, 0.3.6.17.2
[   37.220914] tn40xx: Supported phys : MV88X3120 MV88X3310 MV88E2010 QT2025 TLK10232 AQR105 MUSTANG 
[   37.566789] qed_init called
[   37.566801] QLogic FastLinQ 4xxxx Core Module qed 8.33.9.0
[   37.566806] creating debugfs root node
[   37.662425] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.33.9.0
[   37.701526] Loading modules backported from Linux version v3.18.1-0-g39ca484
[   37.701535] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c
[   37.864945] Compat-mlnx-ofed backport release: c22af88
[   37.864957] Backport based on mlnx_ofed/mlnx-ofa_kernel-4.0.git c22af88
[   37.864963] compat.git: mlnx_ofed/mlnx-ofa_kernel-4.0.git
[   39.434820] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11)
[   39.769573] bio: create slab <bio-1> at 1
[   39.770808] Btrfs loaded
[   39.813060] exFAT: Version 1.2.9
[   40.105251] jme: JMicron JMC2XX ethernet driver version 1.0.8
[   40.149956] sky2: driver version 1.30
[   40.150346] sky2 0000:09:00.0: Yukon-2 Extreme chip revision 2
[   40.150469] sky2 0000:09:00.0: irq 41 for MSI/MSI-X
[   40.151176] sky2 0000:09:00.0 eth0: addr 00:11:32:87:86:e8
[   40.257063] pch_gbe: EG20T PCH Gigabit Ethernet Driver - version 1.01
[   40.343231] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.2.42
[   40.387834] QLogic/NetXen Network Driver v4.0.80
[   40.405384] Solarflare NET driver v3.2
[   40.429716] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[   40.429726] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   40.451493] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[   40.472761] VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI
[   40.550597] igbvf: Intel(R) Gigabit Virtual Function Driver - 2.3.8.2
[   40.550608] igbvf: Copyright (c) 1999-2015 Intel Corporation.
[   40.585234] ixgbevf: Intel(R) 10GbE PCI Express Virtual Function Driver - version 4.6.1
[   40.585245] Copyright(c) 1999 - 2019 Intel Corporation.
[   40.692869] usbcore: registered new interface driver ax88179_178a
[   40.707472] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input0
[   40.707492] ACPI: Power Button [PWRB]
[   40.707668] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[   40.707681] ACPI: Power Button [PWRF]
[   40.761354] Atheros(R) L2 Ethernet Driver - version 2.2.3
[   40.761363] Copyright (c) 2007 Atheros Corporation.
[   40.776331] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[   40.776343] e100: Copyright(c) 1999-2006 Intel Corporation
[   40.798533] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[   40.798543] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[   40.896754] Brocade 10G Ethernet driver - version: 3.1.2.1
[   40.911989] vxge: Copyright(c) 2002-2010 Exar Corp.
[   40.912001] vxge: Driver version: 2.5.3.22640-k
[   40.926998] usbcore: registered new interface driver aqc111
[   40.941744] usbcore: registered new interface driver asix
[   40.956492] usbcore: registered new interface driver cx82310_eth
[   40.970711] et131x: module is from the staging directory, the quality is unknown, you have been warned.
[   40.994302] i40evf: Intel(R) 40-10 Gigabit Virtual Function Network Driver - version 3.6.15
[   40.994311] Copyright(c) 2013 - 2018 Intel Corporation.
[   41.009073] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[   41.024148] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[   41.024247] usbcore: registered new interface driver pegasus
[   41.038573] usbcore: registered new interface driver plusb
[   41.053713] usbcore: registered new interface driver r8152
[   41.068759] usbcore: registered new interface driver rtl8150
[   41.254189] 2020-1-11 11:54:51 UTC
[   41.254203] synobios: load, major number 201
[   41.254217] Brand: Synology
[   41.254223] Model: DS-3615xs
[   41.254231] set group disks wakeup number to 4, spinup time deno 7
[   41.254252] synobios cpu_arch proc entry initialized
[   41.254263] synobios crypto_hw proc entry initialized
[   41.254273] synobios syno_platform proc entry initialized
[   41.254310] synobios open /dev/ttyS1 success
[   44.429454] sky2 0000:09:00.0 eth0: enabling interface
[   44.429586] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   47.325639] sky2 0000:09:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both
[   47.326658] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   48.383549] md: md2 stopped.
[   48.393444] md: bind<sda3>
[   48.410103] md/raid1:md2: active with 1 out of 1 mirrors
[   48.418965] md2: detected capacity change from 0 to 155104116736
[   48.428552]  md2: unknown partition table
[   49.628117] init: dhcp-client (eth0) main process (7811) killed by TERM signal
[   53.556167] BTRFS: device label 2020.01.10-18:54:32 v24922 devid 1 transid 63 /dev/md2
[   53.558311] BTRFS info (device md2): enabling auto syno reclaim space
[   53.558328] BTRFS info (device md2): using free space tree
[   53.558334] BTRFS: has skinny extents
[   66.262150] usbcore: registered new interface driver usblp
[   66.549785] usbcore: registered new interface driver usbhid
[   66.549794] usbhid: USB HID core driver
[   69.105091] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(0011328786e8).
[   69.146814] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized
[   69.220295] iSCSI:target_core_device.c:617:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
[   69.242221] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
[   69.801956] iSCSI:target_core_file.c:146:fd_attach_hba RODSP plugin for fileio is enabled.
[   69.801972] iSCSI:target_core_file.c:153:fd_attach_hba ODX Token Manager is enabled.
[   69.802066] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled.
[   69.802107] iSCSI:target_core_ep.c:813:ep_attach_hba RODSP plugin for epio is enabled.
[   69.802113] iSCSI:target_core_ep.c:820:ep_attach_hba ODX Token Manager is enabled.
[   75.082492] warning: `nginx' uses 32-bit capabilities (legacy support in use)
[   76.720994] init: iscsi_pluginserverd main process (10923) terminated with status 255
[   76.721272] init: iscsi_pluginserverd main process ended, respawning
[   79.479137] ata1.00: configured for UDMA/133
[   79.479159] ata1: EH complete
[   81.881712] perf interrupt took too long (2519 > 5000), lowering kernel.perf_event_max_sample_rate to 50000
[   82.330880] loop: module loaded
[   87.575740] init: synoscheduler-vmtouch main process (4604) killed by TERM signal
[   88.979277] init: synoscheduler-vmtouch main process (11949) killed by TERM signal
[  121.515558] usbcore: registered new interface driver snd-usb-audio
[  121.855401] usbcore: registered new interface driver snd-usb-hiface

 

 

Edited by Dreadnought
code formating

Share this post


Link to post
Share on other sites
Quote

das plugin berücksichtigt 6.2.2 nicht, es werden beim istallieren veraltete treiber datein von 6.2.0 einkopiert, die man nach der installation wieder manuell entfernen muss

https://xpenology.com/forum/topic/7195-power-button-package/?do=findComment&comment=129613

 

unter Berücksichtigung von dem Hinweis, habe ich das Package installiert. Das Drücken des Power Buttons hat den H340 auch heruntergefahren aber nach wenigen Sekunden startete er wieder neu und blieb nicht aus. Das Herunterfahren über die DSM Oberfläche zeigt auch weiter das Fehlerbild. 

 

Ich schau auch gleich mal noch  /var/log/syslog und var/log/messages. Update: Hier stand aber nichts relevantes drinnen.

Edited by Dreadnought

Share this post


Link to post
Share on other sites

Für die, die es interessiert. Beim H341 dagegen läuft alles wie am Schnürchen und ohne irgendwelche Probleme.

Diesen hab ich erfolgreich auf DSM 6.2.2 Update 4 gehoben mit einem funktionierenden Power-Button.

Share this post


Link to post
Share on other sites

du kannst ja mal button und evdev mit rmmod entladen und dann in der webgui einen shutdoen machen und sehen ob das gleiche passiert

ansonsten mal monitor, maus, tastatur abklemmen und sehen ob er auch dann aufwacht nach dem shutdown

bios kontrollieren ob es da irgendwelche events gibt die zum eischalten benutzt werden und soweit möglich abstellen

 

Share this post


Link to post
Share on other sites
20 hours ago, IG-88 said:

du kannst ja mal button und evdev mit rmmod entladen und dann in der webgui einen shutdoen machen und sehen ob das gleiche passiert

ansonsten mal monitor, maus, tastatur abklemmen und sehen ob er auch dann aufwacht nach dem shutdown

bios kontrollieren ob es da irgendwelche events gibt die zum eischalten benutzt werden und soweit möglich abstellen

 

 

gerade probiert. Es hat leider nicht geklappt. Im Bios gibt es leider nicht viel was man hier umstellen kann. Es bleibt wie es ist. Die Kiste bleibt nicht aus.

Share this post


Link to post
Share on other sites
On 1/11/2020 at 1:13 PM, Dreadnought said:

liegt es vielleicht an der Stelle: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] 

Ich habe den Auszug gemacht bevor ich das PowerButton Package installiert habe.

 

das hatte ich gleucbe ich nicht kommentiert, S4 ist ruhezustand und S5 ist das was du eigentlich beim runterfahen machst

https://de.wikipedia.org/wiki/Advanced_Configuration_and_Power_Interface

 

1 hour ago, Dreadnought said:

gerade probiert. Es hat leider nicht geklappt.

 

hat es denn vorher mit dsm 6.2.0 funktioniert oder war es was älteres?

 

was du evtl. noch probieren kannst ist im loader (1. partition) die grub.cfg anpassen, dem kernel aufruf den parameter acpi = off hinzufügen

bei "set common_args_xxxx= '..." hinzufügen

 

 

etwas weiter hergeholt und komplexer:

 

ich habe mal bei einem anderen projekt gesehen das man einen extra poweroff kernel benutzt hat, beim runterfahren wurde der grub so eingestellt das ein bestimmter menüpunkt gestartet wurde und wenn der gestartet wurde wurde es wieder auf den default (erster menüeintrag) eingestllt und dann ein extra "system" bestehend aus einem kernel gestartet der die kiste ausgeschaltet hat, damit ließe sich zumindest umgehen wenn es (wie zu vermuten) am kernel liegt

dazu müsstest du am shutdown script rumspielen (grub einstellung ändern beim shutdown) und im bootloader die grub.cfg anpassen (und natürlich den poweroff kernel auf den loader kopieren)

für einen ersten test würde es genügen der grubcfg den eintrag hinzuzufügen und ihn dann beim booten manuell auzuwählen um zu sehen das er funtktioniert und die kiste aus bleibt

 

das wäre der link dazu

http://www.vdr-wiki.de/wiki/index.php/Shutdown.sh

 

Share this post


Link to post
Share on other sites
On 1/12/2020 at 8:52 PM, IG-88 said:

für einen ersten test würde es genügen der grubcfg den eintrag hinzuzufügen und ihn dann beim booten manuell auzuwählen um zu sehen das er funtktioniert und die kiste aus bleibt

 

das wäre der link dazu

http://www.vdr-wiki.de/wiki/index.php/Shutdown.sh

 

Hi @IG-88 hast du einen Tipp wie ich das in der grub.cfg eintragen kann?

 

Das ist ja der Standardeintrag:

 

folgendes habe ich auf einer anderen Seite gefunden, was jedoch auch nicht funktionieren wollte:

menuentry "DS3615xs 6.2 Baremetal $VERSION" --class os {
       acpi=off

        set img=
        savedefault
        loadlinux 3615 usb
        loadinitrd
        showtips
}

 

Aber wie ich hier eine sh-Datei einbauen soll verstehe ich nicht.

 

set common_args_3615='acpi=off' hat leider nicht funktioniert. Hier wollte DSM gar nicht erst starten.

Edited by Dreadnought

Share this post


Link to post
Share on other sites
22 hours ago, Dreadnought said:

set common_args_3615='acpi=off' hat leider nicht funktioniert. Hier wollte DSM gar nicht erst starten.

 

also wenn du das so gemacht hast wird das nix, du musst schon behalten was dort steht, also dann so

 

set common_args_3615='syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 acpi=off'

 

Share this post


Link to post
Share on other sites
1 hour ago, IG-88 said:

 

also wenn du das so gemacht hast wird das nix, du musst schon behalten was dort steht, also dann so

 


set common_args_3615='syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 acpi=off'

 

 

Ja man sollte mal richtig lesen...

 

Ich hatte acpi=off bei extra_args_3615 ergänzt und nicht bei den common_args.

 

Nachdem ich das jetzt korrigiert habe und die common_args angepasst habe, startet der H340 noch aber ich finde die Kiste nicht mehr im Netzwerk.

Ich versuche jetzt die letzte Konfiguration nachzustellen, wo das herunterfahren noch funktioniert hat.  

 

UPDATE: OK das ging schnell wenn ich den Loader DS916p 6.1 Jun's Mod V1.02b mit dem extra916plus_v4.8.zip Treiberpaket nutze, bleibt der H340 aus.

Edited by Dreadnought

Share this post


Link to post
Share on other sites

 

Hier jetzt einmal der dmesg-Auszug vom dem DS916+, an einigen Stellen gibt es doch ein paar Unterschiede:

 

Spoiler

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.102 (root@build4) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #15284 SMP Thu Jun 21 00:42:18 CST 2018
[    0.000000] Command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=1 HddHotplug=0 syno_hw_version=DS916+ vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_hdd_detect=0 syno_port_thaw=1 root=/dev/md0 sn=xxx mac1=xx netif_num=1 vid=0x0781 pid=0x5530
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000cc000-0x00000000000cffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f5dffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f5e0000-0x000000007f5e7fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f5e8000-0x000000007f5e8fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f5e9000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: Acer              Aspire easyStore H340 /WG945GCM         , BIOS P03     02/03/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f5e0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 080000000 write-back
[    0.000000]   1 base 07F600000 mask 0FFE00000 uncachable
[    0.000000]   2 base 07F800000 mask 0FF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x019ce000, 0x019cefff] PGTABLE
[    0.000000] BRK [0x019cf000, 0x019cffff] PGTABLE
[    0.000000] BRK [0x019d0000, 0x019d0fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7f200000-0x7f3fffff]
[    0.000000]  [mem 0x7f200000-0x7f3fffff] page 2M
[    0.000000] BRK [0x019d1000, 0x019d1fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7c000000-0x7f1fffff]
[    0.000000]  [mem 0x7c000000-0x7f1fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x7bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x7f400000-0x7f5dffff]
[    0.000000]  [mem 0x7f400000-0x7f5dffff] page 4k
[    0.000000] BRK [0x019d2000, 0x019d2fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36a2c000-0x3750dfff]
[    0.000000] ACPI: RSDP 0x00000000000F77F0 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 0x000000007F5E2DF7 00044 (v01 PTLTD  ? XSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 0x000000007F5E7E40 000F4 (v03 INTEL           06040000 PTL  00000003)
[    0.000000] ACPI: DSDT 0x000000007F5E2E3B 04F91 (v01 INTEL  LAKEPORT 06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 0x000000007F5E8FC0 00040
[    0.000000] ACPI: MCFG 0x000000007F5E7F34 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
[    0.000000] ACPI: APIC 0x000000007F5E7F70 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 0x000000007F5E7FD8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007cc00000-ffff88007e7fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x7f5dffff]
[    0.000000] On node 0 totalpages: 521596
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7077 pages used for memmap
[    0.000000]   DMA32 zone: 517600 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000cc000
[    0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] e820: [mem 0x80000000-0xfebfffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 24 pages/cpu @ffff88007f200000 s69376 r8192 d20736 u1048576
[    0.000000] pcpu-alloc: s69376 r8192 d20736 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 514442
[    0.000000] Kernel command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=1 HddHotplug=0 syno_hw_version=DS916+ vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_hdd_detect=0 syno_port_thaw=1 root=/dev/md0 sn=1720NZN180303 mac1=0011328786E8 netif_num=1 vid=0x0781 pid=0x5530
[    0.000000] Power on seq num: 1
[    0.000000] Synology Hardware Version: DS916+-j
[    0.000000] Vender format version: 2
[    0.000000] SYNO GPIO hdd detect pin: 0
[    0.000000] Serial Number: xxx
[    0.000000] Mac1: xx
[    0.000000] Internal netif num: 1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Memory: 2033048k/2086784k available (4776k kernel code, 400k absent, 53336k reserved, 3815k data, 740k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:4352 nr_irqs:512 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 8388608 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1600.068 MHz processor
[    0.002008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.13 BogoMIPS (lpj=1600068)[    0.002016] pid_max: default: 32768 minimum: 301
[    0.002127] Security Framework initialized
[    0.002146] AppArmor: AppArmor initialized
[    0.002175] Mount-cache hash table entries: 256
[    0.002612] Initializing cgroup subsys memory
[    0.002653] Initializing cgroup subsys devices
[    0.002658] Initializing cgroup subsys freezer
[    0.002663] Initializing cgroup subsys blkio
[    0.002721] Disabled fast string operations
[    0.002731] CPU: Physical Processor ID: 0
[    0.002734] CPU: Processor Core ID: 0
[    0.002738] mce: CPU supports 5 MCE banks
[    0.002751] CPU0: Thermal monitoring handled by SMI
[    0.002768] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
               Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
               tlb_flushall_shift: 6
[    0.003124] Freeing SMP alternatives: 24k freed
[    0.003150] ACPI: Core revision 20130328
[    0.006917] ACPI: All ACPI Tables successfully acquired
[    0.008157] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.018172] smpboot: CPU0: Intel(R) Atom(TM) CPU  230   @ 1.60GHz (fam: 06, model: 1c, stepping: 02)
[    0.019000] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
[    0.019000] ... version:                3
[    0.019000] ... bit width:              40
[    0.019000] ... generic registers:      2
[    0.019000] ... value mask:             000000ffffffffff
[    0.019000] ... max period:             000000007fffffff
[    0.019000] ... fixed-purpose events:   3
[    0.019000] ... event mask:             0000000700000003
[    0.019000] smpboot: Booting Node   0, Processors  #1 OK
[    0.003000] Disabled fast string operations
[    0.003000] CPU0: Thermal monitoring enabled (TM1)
[    0.030112] Brought up 2 CPUs
[    0.030120] smpboot: Total of 2 processors activated (6400.27 BogoMIPS)
[    0.031446] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.031672] devtmpfs: initialized
[    0.032146] PM: Registering ACPI NVS region [mem 0x7f5e8000-0x7f5e8fff] (4096 bytes)
[    0.032190] xor: measuring software checksum speed
[    0.041132]    prefetch64-sse:  5292.000 MB/sec
[    0.051131]    generic_sse:  4828.000 MB/sec
[    0.051138] xor: using function: prefetch64-sse (5292.000 MB/sec)
[    0.051145] pinctrl core: initialized pinctrl subsystem
[    0.051336] NET: Registered protocol family 16
[    0.053195] ACPI: bus type PCI registered
[    0.053223] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.053223] PCI: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support
[    0.053223] PCI: not using MMCONFIG
[    0.053223] PCI: Using configuration type 1 for base access
[    0.068200] bio: create slab <bio-0> at 0
[    0.085064] raid6: sse2x1   gen()   105 MB/s
[    0.102026] raid6: sse2x1   xor()   722 MB/s
[    0.119085] raid6: sse2x2   gen()   359 MB/s
[    0.136020] raid6: sse2x2   xor()  1177 MB/s
[    0.153059] raid6: sse2x4   gen()   691 MB/s
[    0.170006] raid6: sse2x4   xor()  1277 MB/s
[    0.170011] raid6: using algorithm sse2x4 gen() (691 MB/s)
[    0.170015] raid6: .... xor() 1277 MB/s, rmw enabled
[    0.170020] raid6: using ssse3x2 recovery algorithm
[    0.170171] ACPI: Added _OSI(Module Device)
[    0.170179] ACPI: Added _OSI(Processor Device)
[    0.170183] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.170188] ACPI: Added _OSI(Processor Aggregator Device)
[    0.171577] ACPI: EC: Look up EC in DSDT
[    0.175364] ACPI: Interpreter enabled
[    0.175379] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130328/hwxface-568)
[    0.175398] ACPI: (supports S0 S5)
[    0.175402] ACPI: Using IOAPIC for interrupt routing
[    0.175490] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.175490] ACPI: No dock devices found.
[    0.192664] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.192817] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20130328/nspredef-307)
[    0.192832] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.192835] _OSC request data:1 8 0
[    0.195787] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.195863] PCI host bridge to bus 0000:00
[    0.195863] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.196022] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.196031] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.196036] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.196042] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.196048] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.196054] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.196059] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebffbff]
[    0.196065] pci_bus 0000:00: root bus resource [io  0x0d00-0xfdff]
[    0.196071] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.196098] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[    0.196321] pci 0000:00:02.0: [8086:2772] type 00 class 0x030000
[    0.196321] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf007ffff]
[    0.196321] pci 0000:00:02.0: reg 14: [io  0x18d0-0x18d7]
[    0.196321] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[    0.196321] pci 0000:00:02.0: reg 1c: [mem 0xf0080000-0xf00bffff]
[    0.196321] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.196321] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.197040] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.197131] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.197185] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.197304] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.197366] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.197366] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.197366] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.197366] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.198081] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.198200] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.198309] pci 0000:00:1c.4: [8086:27e0] type 01 class 0x060400
[    0.198309] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.198309] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.198377] pci 0000:00:1c.5: [8086:27e2] type 01 class 0x060400
[    0.198377] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.198377] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.199072] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.199129] pci 0000:00:1d.0: reg 20: [io  0x1820-0x183f]
[    0.199316] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.199385] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.199385] pci 0000:00:1d.1: reg 20: [io  0x1840-0x185f]
[    0.199385] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.199385] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.200053] pci 0000:00:1d.2: reg 20: [io  0x1860-0x187f]
[    0.200225] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.200330] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.200330] pci 0000:00:1d.3: reg 20: [io  0x1880-0x189f]
[    0.200330] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.200391] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.200391] pci 0000:00:1d.7: reg 10: [mem 0xf02c0000-0xf02c03ff]
[    0.200391] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.201108] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.201212] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.201284] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.201351] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.201351] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.201351] pci 0000:00:1f.0: address space collision: [io  0x1000-0x107f] conflicts with ACPI PM1a_EVT_BLK [??? 0x00001000-0x00001003 flags 0x80000000]
[    0.201351] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.201351] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0800 (mask 007f)
[    0.202105] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.202133] pci 0000:00:1f.2: reg 10: [io  0x18e8-0x18ef]
[    0.202146] pci 0000:00:1f.2: reg 14: [io  0x18dc-0x18df]
[    0.202159] pci 0000:00:1f.2: reg 18: [io  0x18e0-0x18e7]
[    0.202173] pci 0000:00:1f.2: reg 1c: [io  0x18d8-0x18db]
[    0.202186] pci 0000:00:1f.2: reg 20: [io  0x18c0-0x18cf]
[    0.202200] pci 0000:00:1f.2: reg 24: [mem 0xf02c0400-0xf02c07ff]
[    0.202249] pci 0000:00:1f.2: PME# supported from D3hot
[    0.202415] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.202415] pci 0000:00:1f.3: reg 20: [io  0x18a0-0x18bf]
[    0.203044] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.203044] pci 0000:00:1c.0:   bridge window [io  0x0000-0x0fff]
[    0.203132] pci 0000:00:1c.1: PCI bridge to [bus 04]
[    0.203132] pci 0000:00:1c.1:   bridge window [io  0x0000-0x0fff]
[    0.203160] pci 0000:00:1c.2: PCI bridge to [bus 06]
[    0.203160] pci 0000:00:1c.2:   bridge window [io  0x0000-0x0fff]
[    0.203160] pci 0000:00:1c.3: PCI bridge to [bus 08]
[    0.203160] pci 0000:00:1c.3:   bridge window [io  0x0000-0x0fff]
[    0.203160] pci 0000:09:00.0: [11ab:436b] type 00 class 0x020000
[    0.203160] pci 0000:09:00.0: reg 10: [mem 0xf0300000-0xf0303fff 64bit]
[    0.203160] pci 0000:09:00.0: reg 18: [io  0x2000-0x20ff]
[    0.203160] pci 0000:09:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.203196] pci 0000:09:00.0: supports D1 D2
[    0.203202] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.206042] pci 0000:00:1c.4: PCI bridge to [bus 09]
[    0.206044] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.206053] pci 0000:00:1c.4:   bridge window [mem 0xf0300000-0xf03fffff]
[    0.207086] pci 0000:0a:00.0: [11ab:6121] type 00 class 0x01018f
[    0.207112] pci 0000:0a:00.0: reg 10: [io  0x3020-0x3027]
[    0.207130] pci 0000:0a:00.0: reg 14: [io  0x3014-0x3017]
[    0.207147] pci 0000:0a:00.0: reg 18: [io  0x3018-0x301f]
[    0.207164] pci 0000:0a:00.0: reg 1c: [io  0x3010-0x3013]
[    0.207181] pci 0000:0a:00.0: reg 20: [io  0x3000-0x300f]
[    0.207199] pci 0000:0a:00.0: reg 24: [mem 0xf0400000-0xf04003ff]
[    0.207280] pci 0000:0a:00.0: supports D1
[    0.207285] pci 0000:0a:00.0: PME# supported from D0 D1 D3hot
[    0.207395] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.207395] pci 0000:00:1c.5: PCI bridge to [bus 0a]
[    0.207395] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
[    0.207395] pci 0000:00:1c.5:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.207395] pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)
[    0.207395] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.207395] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.207395] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.207395] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.207395] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.207395] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.207395] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebffbff] (subtractive decode)
[    0.207395] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xfdff] (subtractive decode)
[    0.207395] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.207395] pci_bus 0000:00: on NUMA node 0
[    0.207395] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20130328/nspredef-307)
[    0.207395] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.207395] _OSC request data:1 1e 0
[    0.207395] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.207395] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.207593] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 11 14 15) *7
[    0.207747] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10 11 14 15)
[    0.207896] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 *11 14 15)
[    0.208089] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *10 11 14 15)
[    0.208254] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled.
[    0.208413] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled.
[    0.208571] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled.
[    0.208730] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 11 14 15) *5
[    0.210120] ACPI: Enabled 5 GPEs in block 00 to 1F
[    0.210144] acpi root: \_SB_.PCI0 notify handler is installed
[    0.210231] Found 1 acpi root devices
[    0.211006] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.211006] vgaarb: loaded
[    0.211006] vgaarb: bridge control possible 0000:00:02.0
[    0.211079] SCSI subsystem initialized
[    0.211079] ACPI: bus type ATA registered
[    0.211088] libata version 3.00 loaded.
[    0.212068] pps_core: LinuxPPS API ver. 1 registered
[    0.212068] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.212072] PTP clock support registered
[    0.212088] PCI: Using ACPI for IRQ routing
[    0.212088] PCI: pci_cache_line_size set to 64 bytes
[    0.212151] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.212158] e820: reserve RAM buffer [mem 0x7f5e0000-0x7fffffff]
[    0.213401] hpet clockevent registered
[    0.213411] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.213441] Switching to clocksource hpet
[    0.213441] AppArmor: AppArmor Filesystem Enabled
[    0.213441] pnp: PnP ACPI init
[    0.213456] ACPI: bus type PNP registered
[    0.214118] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.214130] system 00:00: [io  0x1000-0x107f] could not be reserved
[    0.214138] system 00:00: [io  0x1180-0x11bf] has been reserved
[    0.214145] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.214151] system 00:00: [io  0xfe00] has been reserved
[    0.214159] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.214170] system 00:00: [mem 0xfed13000-0xfed13fff] has been reserved
[    0.214177] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.214185] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.214192] system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved
[    0.214201] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.214243] pnp 00:01: [dma 4]
[    0.214433] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.214639] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.214892] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.215075] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.215569] pnp 00:05: Plug and Play ACPI device, IDs INT0800 (active)
[    0.215783] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.215977] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.216672] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.216864] pnp: PnP ACPI: found 9 devices
[    0.216869] ACPI: bus type PNP unregistered
[    0.234854] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.234867] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.234875] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[    0.234893] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.234900] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[    0.234907] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[    0.234925] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 06] add_size 1000
[    0.234932] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
[    0.234939] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000
[    0.234957] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 08] add_size 1000
[    0.234964] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
[    0.234971] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000
[    0.234987] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x001fffff pref] to [bus 09] add_size 200000
[    0.235032] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0a] add_size 200000
[    0.235074] pci 0000:00:1f.0: BAR 13: [io  0x1000-0x107f] has bogus alignment
[    0.235086] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.235093] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.235100] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.235107] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.235113] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.235120] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.235126] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.235133] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.235140] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[    0.235147] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.235153] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.235160] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.235166] pci 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.235172] pci 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.235186] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[    0.235195] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.235203] pci 0000:00:1c.1: BAR 14: assigned [mem 0x80400000-0x805fffff]
[    0.235212] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    0.235220] pci 0000:00:1c.2: BAR 14: assigned [mem 0x80800000-0x809fffff]
[    0.235228] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80a00000-0x80bfffff 64bit pref]
[    0.235236] pci 0000:00:1c.3: BAR 14: assigned [mem 0x80c00000-0x80dfffff]
[    0.235245] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80e00000-0x80ffffff 64bit pref]
[    0.235254] pci 0000:00:1c.4: BAR 15: assigned [mem 0x81000000-0x812fffff pref]
[    0.235262] pci 0000:00:1c.5: BAR 15: assigned [mem 0x81300000-0x814fffff 64bit pref]
[    0.235272] pci 0000:00:1c.0: BAR 13: assigned [io  0x4000-0x4fff]
[    0.235280] pci 0000:00:1c.1: BAR 13: assigned [io  0x5000-0x5fff]
[    0.235287] pci 0000:00:1c.2: BAR 13: assigned [io  0x6000-0x6fff]
[    0.235295] pci 0000:00:1c.3: BAR 13: assigned [io  0x7000-0x7fff]
[    0.235305] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.235314] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.235323] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.235331] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.235342] pci 0000:00:1c.1: PCI bridge to [bus 04]
[    0.235348] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.235357] pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x805fffff]
[    0.235365] pci 0000:00:1c.1:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.235375] pci 0000:00:1c.2: PCI bridge to [bus 06]
[    0.235382] pci 0000:00:1c.2:   bridge window [io  0x6000-0x6fff]
[    0.235391] pci 0000:00:1c.2:   bridge window [mem 0x80800000-0x809fffff]
[    0.235399] pci 0000:00:1c.2:   bridge window [mem 0x80a00000-0x80bfffff 64bit pref]
[    0.235409] pci 0000:00:1c.3: PCI bridge to [bus 08]
[    0.235415] pci 0000:00:1c.3:   bridge window [io  0x7000-0x7fff]
[    0.235424] pci 0000:00:1c.3:   bridge window [mem 0x80c00000-0x80dfffff]
[    0.235432] pci 0000:00:1c.3:   bridge window [mem 0x80e00000-0x80ffffff 64bit pref]
[    0.235445] pci 0000:09:00.0: BAR 6: assigned [mem 0x81000000-0x8101ffff pref]
[    0.235451] pci 0000:00:1c.4: PCI bridge to [bus 09]
[    0.235458] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.235467] pci 0000:00:1c.4:   bridge window [mem 0xf0300000-0xf03fffff]
[    0.235475] pci 0000:00:1c.4:   bridge window [mem 0x81000000-0x812fffff pref]
[    0.235485] pci 0000:00:1c.5: PCI bridge to [bus 0a]
[    0.235492] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
[    0.235501] pci 0000:00:1c.5:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.235509] pci 0000:00:1c.5:   bridge window [mem 0x81300000-0x814fffff 64bit pref]
[    0.235521] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[    0.235542] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.235836] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[    0.236095] pci 0000:00:1c.2: enabling device (0000 -> 0003)
[    0.236315] pci 0000:00:1c.3: enabling device (0000 -> 0003)
[    0.236935] pci 0000:00:1e.0: setting latency timer to 64
[    0.236945] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.236951] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    0.236958] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
[    0.236963] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.236969] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.236974] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[    0.236980] pci_bus 0000:00: resource 10 [mem 0x80000000-0xfebffbff]
[    0.236986] pci_bus 0000:00: resource 11 [io  0x0d00-0xfdff]
[    0.236992] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
[    0.236998] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.237035] pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff]
[    0.237042] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.237048] pci_bus 0000:04: resource 0 [io  0x5000-0x5fff]
[    0.237054] pci_bus 0000:04: resource 1 [mem 0x80400000-0x805fffff]
[    0.237060] pci_bus 0000:04: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.237066] pci_bus 0000:06: resource 0 [io  0x6000-0x6fff]
[    0.237072] pci_bus 0000:06: resource 1 [mem 0x80800000-0x809fffff]
[    0.237078] pci_bus 0000:06: resource 2 [mem 0x80a00000-0x80bfffff 64bit pref]
[    0.237084] pci_bus 0000:08: resource 0 [io  0x7000-0x7fff]
[    0.237090] pci_bus 0000:08: resource 1 [mem 0x80c00000-0x80dfffff]
[    0.237096] pci_bus 0000:08: resource 2 [mem 0x80e00000-0x80ffffff 64bit pref]
[    0.237102] pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
[    0.237107] pci_bus 0000:09: resource 1 [mem 0xf0300000-0xf03fffff]
[    0.237113] pci_bus 0000:09: resource 2 [mem 0x81000000-0x812fffff pref]
[    0.237119] pci_bus 0000:0a: resource 0 [io  0x3000-0x3fff]
[    0.237125] pci_bus 0000:0a: resource 1 [mem 0xf0400000-0xf04fffff]
[    0.237131] pci_bus 0000:0a: resource 2 [mem 0x81300000-0x814fffff 64bit pref]
[    0.237138] pci_bus 0000:0b: resource 4 [io  0x0000-0x0cf7]
[    0.237143] pci_bus 0000:0b: resource 5 [mem 0x000a0000-0x000bffff]
[    0.237149] pci_bus 0000:0b: resource 6 [mem 0x000d0000-0x000d3fff]
[    0.237155] pci_bus 0000:0b: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.237160] pci_bus 0000:0b: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.237166] pci_bus 0000:0b: resource 9 [mem 0x000e0000-0x000e3fff]
[    0.237173] pci_bus 0000:0b: resource 10 [mem 0x80000000-0xfebffbff]
[    0.237179] pci_bus 0000:0b: resource 11 [io  0x0d00-0xfdff]
[    0.237184] pci_bus 0000:0b: resource 12 [mem 0xfed40000-0xfed44fff]
[    0.237293] NET: Registered protocol family 2
[    0.237908] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[    0.238130] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.238292] TCP: Hash tables configured (established 16384 bind 16384)
[    0.238435] TCP: reno registered
[    0.238451] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.238483] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.238815] NET: Registered protocol family 1
[    0.239198] RPC: Registered named UNIX socket transport module.
[    0.239208] RPC: Registered udp transport module.
[    0.239212] RPC: Registered tcp transport module.
[    0.239215] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.239242] pci 0000:00:02.0: Boot video device
[    0.241483] PCI: CLS 32 bytes, default 64
[    0.241620] Trying to unpack rootfs image as initramfs...
[    6.216419] Freeing initrd memory: 11144k freed
[    6.261614] Simple Boot Flag at 0x36 set to 0x1
[    6.316276] audit: initializing netlink socket (disabled)
[    6.316318] type=2000 audit(1579042181.315:1): initialized
[    6.356678] bounce pool size: 64 pages
[    6.365795] VFS: Disk quotas dquot_6.5.2
[    6.365884] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    6.368280] NFS: Registering the id_resolver key type
[    6.368315] Key type id_resolver registered
[    6.368321] Key type id_legacy registered
[    6.368376] msgmni has been set to 3992
[    6.371532] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    6.371548] io scheduler noop registered
[    6.371554] io scheduler deadline registered
[    6.371591] io scheduler cfq registered (default)
[    7.264084] tsc: Refined TSC clocksource calibration: 1600.056 MHz
[    7.264103] Switching to clocksource tsc
[   10.272639] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[   10.300067] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   10.313766] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250
[   10.679481] brd: module loaded
[   10.693161] ACPI Warning: 0x0000000000001028-0x000000000000102F SystemIO conflicts with Region \_SB_.PCI0.LPC0.PMIO 1 (20130328/utaddress-249)
[   10.693185] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.693196] ACPI Warning: 0x0000000000001180-0x00000000000011AF SystemIO conflicts with Region \_SB_.PCI0.LPC0.GPOX 1 (20130328/utaddress-249)
[   10.693210] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.703604] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.719873] Loading iSCSI transport class v2.0-870.
[   10.850367] ahci 0000:00:1f.2: version 3.0
[   10.850791] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[   10.850926] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[   10.850939] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[   10.850951] ahci 0000:00:1f.2: setting latency timer to 64
[   10.988903] scsi0 : ahci
[   11.012868] scsi1 : ahci
[   11.031052] scsi2 : ahci
[   11.041533] scsi3 : ahci
[   11.052260] ata1: SATA max UDMA/133 abar m1024@0xf02c0400 port 0xf02c0500 irq 40
[   11.052274] ata2: SATA max UDMA/133 abar m1024@0xf02c0400 port 0xf02c0580 irq 40
[   11.052283] ata3: SATA max UDMA/133 abar m1024@0xf02c0400 port 0xf02c0600 irq 40
[   11.052291] ata4: SATA max UDMA/133 abar m1024@0xf02c0400 port 0xf02c0680 irq 40
[   11.357039] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.363457] ata1.00: ATA-7: SAMSUNG HD161GJ, 1AC01118, max UDMA7
[   11.363464] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[   11.369929] ata1.00: configured for UDMA/133
[   11.376564] scsi 0:0:0:0: Direct-Access     SAMSUNG  HD161GJ                  1AC0 PQ: 0 ANSI: 5
[   11.380257] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[   11.380513] sd 0:0:0:0: [sda] Write Protect is off
[   11.380526] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   11.380633] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   11.402753]  sda: sda1 sda2 sda3 < sda5 >
[   11.437174] sd 0:0:0:0: [sda] Attached SCSI disk
[   11.700037] ata2: SATA link down (SStatus 0 SControl 300)
[   12.005035] ata3: SATA link down (SStatus 0 SControl 300)
[   12.310031] ata4: SATA link down (SStatus 0 SControl 300)
[   12.310261] ahci 0000:0a:00.0: Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.
[   12.310275] ahci 0000:0a:00.0: controller can't do NCQ, turning off CAP_NCQ
[   12.310280] ahci 0000:0a:00.0: controller can't do PMP, turning off CAP_PMP
[   12.310286] ahci 0000:0a:00.0: masking port_map 0x7 -> 0x3
[   12.310331] ahci: SSS flag set, parallel bus scan disabled
[   12.310379] ahci 0000:0a:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl IDE mode
[   12.310388] ahci 0000:0a:00.0: flags: 64bit stag led slum part
[   12.357672] scsi4 : ahci
[   12.372547] scsi5 : ahci
[   12.391112] scsi6 : ahci
[   12.403290] ata5: SATA max UDMA/133 abar m1024@0xf0400000 port 0xf0400100 irq 17
[   12.403304] ata6: SATA max UDMA/133 abar m1024@0xf0400000 port 0xf0400180 irq 17
[   12.403310] ata7: DUMMY
[   12.708044] ata5: SATA link down (SStatus 0 SControl 300)
[   13.013047] ata6: SATA link down (SStatus 0 SControl 300)
[   13.013115] ata7: send port disabled event
[   13.044554] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[   13.057069] serio: i8042 KBD port at 0x60,0x64 irq 1
[   13.057098] serio: i8042 AUX port at 0x60,0x64 irq 12
[   13.065613] rtc_cmos 00:03: RTC can wake from S4
[   13.080603] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[   13.080674] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[   13.101777] i2c /dev entries driver
[   13.144381] md: linear personality registered for level -1
[   13.144393] md: raid0 personality registered for level 0
[   13.144399] md: raid1 personality registered for level 1
[   13.144404] md: raid10 personality registered for level 10
[   13.156224] md: raid6 personality registered for level 6
[   13.156234] md: raid5 personality registered for level 5
[   13.156241] md: raid4 personality registered for level 4
[   13.161482] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[   13.161496] cpuidle: using governor ladder
[   13.161502] cpuidle: using governor menu
[   13.161769] TCP: cubic registered
[   13.161782] NET: Registered protocol family 17
[   13.161879] Key type dns_resolver registered
[   13.219212] registered taskstats version 1
[   13.225925] rtc_cmos 00:03: setting system clock to 2020-01-14 22:49:49 UTC (1579042189)
[   13.229235] Freeing unused kernel memory: 740k freed
[   13.229857] Write protecting the kernel read-only data: 8192k
[   13.230506] Freeing unused kernel memory: 1356k freed
[   13.236877] Freeing unused kernel memory: 524k freed
[   13.447209] ACPI: bus type USB registered
[   13.449046] usbcore: registered new interface driver usbfs
[   13.452253] usbcore: registered new interface driver hub
[   13.461282] usbcore: registered new interface driver ethub
[   13.467519] usbcore: registered new device driver usb
[   13.522687] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   13.542328] ehci-pci: EHCI PCI platform driver
[   13.542815] ehci-pci 0000:00:1d.7: setting latency timer to 64
[   13.542849] ehci-pci 0000:00:1d.7: EHCI Host Controller
[   13.542879] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[   13.542909] ehci-pci 0000:00:1d.7: debug port 1
[   13.546849] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[   13.546918] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf02c0000
[   13.552060] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[   13.554296] hub 1-0:1.0: USB hub found
[   13.554330] hub 1-0:1.0: 8 ports detected
[   13.612906] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   13.728214] usbcore: registered new interface driver usb-storage
[   13.808053] VMware PVSCSI driver - version 1.0.2.0-k
[   13.836000] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[   13.864360] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[   13.950103] usb 1-3: new high-speed USB device number 3 using ehci-pci
[   14.072116] Fusion MPT base driver 3.04.20
[   14.072125] Copyright (c) 1999-2008 LSI Corporation
[   14.090135] usb-storage 1-3:1.0: USB Mass Storage device detected
[   14.096332] scsi7 : usb-storage 1-3:1.0
[   14.160262] Fusion MPT SPI Host driver 3.04.20
[   14.196247] Fusion MPT SAS Host driver 3.04.20
[   14.224227] Fusion MPT misc device (ioctl) driver 3.04.20
[   14.224691] mptctl: Registered with Fusion MPT base driver
[   14.224703] mptctl: /dev/mptctl @ (major,minor=10,220)
[   14.280841] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013
[   14.310184] mpt2sas version 14.100.00.00 loaded
[   14.347696] mpt3sas version 01.100.01.00 loaded
[   14.412893] Adaptec aacraid driver 1.2-0[30200]-ms
[   14.442219] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[   14.470504] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[   14.498441] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[   14.523102] usb 1-5: new high-speed USB device number 5 using ehci-pci
[   14.612292] RocketRAID 3xxx/4xxx Controller driver v1.8
[   14.641328] isci: Intel(R) C600 SAS Controller Driver - version 1.1.0
[   14.666878] usb-storage 1-5:1.0: USB Mass Storage device detected
[   14.672459] scsi8 : usb-storage 1-5:1.0
[   14.776339] braswell_synobios: module license 'Synology Inc.' taints kernel.
[   14.776351] Disabling lock debugging due to kernel taint
[   14.779448] 2020-1-14 22:49:50 UTC
[   14.779463] synobios: load, major number 201
[   14.779475] Brand: Synology
[   14.779483] Model: DS-916+
[   14.779490] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   14.779510] synobios cpu_arch proc entry initialized
[   14.779519] synobios crypto_hw proc entry initialized
[   14.779528] synobios syno_platform proc entry initialized
[   14.807078] usb 1-8: new high-speed USB device number 6 using ehci-pci
[   14.810698] synobios: unload
[   14.840539] md: Autodetecting RAID arrays.
[   14.877392] md: invalid raid superblock magic on sda5
[   14.882457] md: sda5 does not have a valid v0.90 superblock, not importing!
[   14.882492] md: Scanned 3 and added 2 devices.
[   14.882496] md: autorun ...
[   14.882502] md: considering sda1 ...
[   14.882522] md:  adding sda1 ...
[   14.882531] md: sda2 has different UUID to sda1
[   14.882546] md: created md0
[   14.882551] md: bind<sda1>
[   14.882594] md: running: <sda1>
[   14.883259] md/raid1:md0: active with 1 out of 12 mirrors
[   14.883314] md0: detected capacity change from 0 to 2549940224
[   14.883623] md: considering sda2 ...
[   14.883644] md:  adding sda2 ...
[   14.887459] md: created md1
[   14.887469] md: bind<sda2>
[   14.887503] md: running: <sda2>
[   14.899972] md/raid1:md1: active with 1 out of 12 mirrors
[   14.900080] md1: detected capacity change from 0 to 2147418112
[   14.902436] md: ... autorun DONE.
[   14.957520] usb-storage 1-8:1.0: USB Mass Storage device detected
[   14.963608] scsi9 : usb-storage 1-8:1.0
[   15.021801]  md0: unknown partition table
[   15.110646] scsi 7:0:0:0: Direct-Access     SanDisk  Extreme                  0001 PQ: 0 ANSI: 6
[   15.122807] sd 7:0:0:0: [sdq] 30651678 512-byte logical blocks: (15.6 GB/14.6 GiB)
[   15.123937] sd 7:0:0:0: [sdq] Write Protect is off
[   15.123955] sd 7:0:0:0: [sdq] Mode Sense: 33 00 00 08
[   15.125126] sd 7:0:0:0: [sdq] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   15.153476]  sdq: sdq1
[   15.168178] sd 7:0:0:0: [sdq] Attached SCSI disk
[   15.687143] scsi 8:0:0:0: Direct-Access     SanDisk  Cruzer                   8.02 PQ: 0 ANSI: 0 CCS
[   15.699799] sd 8:0:0:0: [synoboot] 7913471 512-byte logical blocks: (4.05 GB/3.77 GiB)
[   15.700552] sd 8:0:0:0: [synoboot] Write Protect is off
[   15.700568] sd 8:0:0:0: [synoboot] Mode Sense: 45 00 00 08
[   15.701296] sd 8:0:0:0: [synoboot] No Caching mode page found
[   15.707096] sd 8:0:0:0: [synoboot] Assuming drive cache: write through
[   15.727167] sd 8:0:0:0: [synoboot] No Caching mode page found
[   15.732963] sd 8:0:0:0: [synoboot] Assuming drive cache: write through
[   15.784744]  synoboot: synoboot1 synoboot2 synoboot3
[   15.803087] sd 8:0:0:0: [synoboot] No Caching mode page found
[   15.808863] sd 8:0:0:0: [synoboot] Assuming drive cache: write through
[   15.815409] sd 8:0:0:0: [synoboot] Attached SCSI removable disk
[   15.975807] scsi 9:0:0:0: Direct-Access     SMI      USB DISK                 1100 PQ: 0 ANSI: 0 CCS
[   15.994565] sd 9:0:0:0: [sdr] 501760 512-byte logical blocks: (256 MB/245 MiB)
[   15.995569] sd 9:0:0:0: [sdr] Write Protect is off
[   15.995585] sd 9:0:0:0: [sdr] Mode Sense: 43 00 00 00
[   15.996574] sd 9:0:0:0: [sdr] No Caching mode page found
[   16.001925] sd 9:0:0:0: [sdr] Assuming drive cache: write through
[   16.032664] sd 9:0:0:0: [sdr] No Caching mode page found
[   16.038023] sd 9:0:0:0: [sdr] Assuming drive cache: write through
[   16.046714]  sdr:
[   16.058814] sd 9:0:0:0: [sdr] No Caching mode page found
[   16.064164] sd 9:0:0:0: [sdr] Assuming drive cache: write through
[   16.070285] sd 9:0:0:0: [sdr] Attached SCSI disk
[   16.246602] EXT4-fs (md0): barriers disabled
[   16.261295] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[   20.711796] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[   22.650060] EXT4-fs (md0): re-mounted. Opts: (null)
[   27.301787] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   27.301981] sd 7:0:0:0: Attached scsi generic sg1 type 0
[   27.302981] sd 8:0:0:0: Attached scsi generic sg2 type 0
[   27.303757] sd 9:0:0:0: Attached scsi generic sg3 type 0
[   27.615043] usb 1-8: reset high-speed USB device number 6 using ehci-pci
[   28.035827]  md1: unknown partition table
[   28.196142] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k
[   28.675364] zram: module is from the staging directory, the quality is unknown, you have been warned.
[   28.677000] zram: Created 1 device(s) ...
[   28.719590] Adding 1227772k swap on /dev/zram0.  Priority:1 extents:1 across:1227772k SS
[   30.587848] NET: Registered protocol family 10
[   30.646324] sit: IPv6 over IPv4 tunneling driver
[   31.551326] init: syno-auth-check main process (5302) killed by TERM signal
[   32.822948] systemd-udevd[5529]: starting version 204
[   35.361621] fuse init (API version 7.22)
[   35.433283] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI
[   35.433293] e1000e: Copyright(c) 1999 - 2016 Intel Corporation.
[   35.545737] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.3
[   35.545747] Copyright (c) 2007-2015 Intel Corporation.
[   35.657274] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.3.3
[   35.657284] Copyright(c) 1999 - 2017 Intel Corporation.
[   35.744577] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 2.3.6
[   35.744589] i40e: Copyright(c) 2013 - 2017 Intel Corporation.
[   35.826078] tn40xx: Tehuti Network Driver, 0.3.6.12.2
[   36.093208] Loading modules backported from Linux version v3.18.1-0-g39ca484
[   36.093217] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c
[   36.353385] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.712.12 ($DateTime: 2015/03/18 07:08:08 $)[   36.755629] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input0
[   36.755649] ACPI: Power Button [PWRB]
[   36.755837] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[   36.755852] ACPI: Power Button [PWRF]
[   36.918906] Linux agpgart interface v0.103
[   37.031789] agpgart-intel 0000:00:00.0: Intel 945G Chipset
[   37.031868] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[   37.031966] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[   37.040994] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[   37.246494] [drm] Initialized drm 1.1.0 20060810
[   37.619215] [drm] Memory usable by graphics device = 256M
[   37.619239] i915 0000:00:02.0: setting latency timer to 64
[   37.636448] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   37.636458] [drm] Driver supports precise vblank timestamp query.
[   37.636683] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   37.666212] [drm] initialized overlay support
[   37.666275] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
[   37.693677] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   37.693689] i915 0000:00:02.0: registered panic notifier
[   37.786889] bio: create slab <bio-1> at 1
[   37.794075] Btrfs loaded
[   37.838513] exFAT: Version 1.2.9
[   38.222393] jme: JMicron JMC2XX ethernet driver version 1.0.8
[   38.292754] sky2: driver version 1.30
[   38.293101] sky2 0000:09:00.0: Yukon-2 Extreme chip revision 2
[   38.293211] sky2 0000:09:00.0: irq 41 for MSI/MSI-X
[   38.294700] sky2 0000:09:00.0 eth0: addr 00:11:32:87:86:e8
[   38.391409] pch_gbe: EG20T PCH Gigabit Ethernet Driver - version 1.01
[   38.479453] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.2.42
[   38.534750] QLogic/NetXen Network Driver v4.0.80
[   38.598621] Solarflare NET driver v3.2
[   38.666664] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[   38.666676] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   38.717261] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[   38.739689] VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI
[   38.802677] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012)
[   38.905845] usbcore: registered new interface driver ax88179_178a
[   38.947843] Atheros(R) L2 Ethernet Driver - version 2.2.3
[   38.947852] Copyright (c) 2007 Atheros Corporation.
[   38.962336] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[   38.962345] e100: Copyright(c) 1999-2006 Intel Corporation
[   38.976079] igbvf: Intel(R) Gigabit Virtual Function Driver - 2.3.9.6
[   38.976088] igbvf: Copyright (c) 1999-2015 Intel Corporation.
[   38.989981] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[   38.989991] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[   39.003842] ixgbevf: Intel(R) 10GbE PCI Express Virtual Function Driver - version 4.3.2
[   39.003852] Copyright(c) 1999 - 2017 Intel Corporation.
[   39.038734] usbcore: registered new interface driver rtl8150
[   39.053078] usbcore: registered new interface driver r8152
[   39.066330] usbcore: registered new interface driver cx82310_eth
[   39.079823] usbcore: registered new interface driver asix
[   39.093276] usbcore: registered new interface driver plusb
[   39.120142] et131x: module is from the staging directory, the quality is unknown, you have been warned.
[   39.191343] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[   39.205580] Brocade 10G Ethernet driver - version: 3.1.2.1
[   39.246252] vxge: Copyright(c) 2002-2010 Exar Corp.
[   39.246261] vxge: Driver version: 2.5.3.22640-k
[   39.381450] 2020-1-14 22:50:15 UTC
[   39.381465] synobios: load, major number 201
[   39.381479] Brand: Synology
[   39.381485] Model: DS-916+
[   39.381493] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   39.381514] synobios cpu_arch proc entry initialized
[   39.381522] synobios crypto_hw proc entry initialized
[   39.381532] synobios syno_platform proc entry initialized
[   40.610608] sky2 0000:09:00.0 eth0: enabling interface
[   40.610724] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   42.462250] md: md2 stopped.
[   42.522123] md: bind<sda5>
[   42.584883] md/raid1:md2: active with 1 out of 1 mirrors
[   42.584946] md2: detected capacity change from 0 to 155094810624
[   42.599554]  md2: unknown partition table
[   43.328610] sky2 0000:09:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both
[   43.328664] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   43.483414] bio: create slab <bio-2> at 2
[   45.170552] BTRFS: device label 2020.01.14-22:32:45 v15284 devid 1 transid 41 /dev/vg1000/lv
[   45.172373] BTRFS info (device dm-0): disabling disk space caching
[   45.172390] BTRFS: has skinny extents
[   45.975480] init: dhcp-client (eth0) main process (7696) killed by TERM signal
[   51.438762] uhci_hcd: USB Universal Host Controller Interface driver
[   51.439264] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[   51.439278] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   51.439301] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[   51.439353] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[   51.440549] hub 2-0:1.0: USB hub found
[   51.440569] hub 2-0:1.0: 2 ports detected
[   51.441183] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[   51.441197] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   51.441223] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[   51.441309] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[   51.442908] hub 3-0:1.0: USB hub found
[   51.442931] hub 3-0:1.0: 2 ports detected
[   51.443557] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[   51.443570] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   51.443595] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[   51.443681] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[   51.445214] hub 4-0:1.0: USB hub found
[   51.445235] hub 4-0:1.0: 2 ports detected
[   51.445817] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[   51.445831] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   51.445856] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[   51.445908] uhci_hcd 0000