Polanskiman Posted October 15, 2017 Share #1 Posted October 15, 2017 This topic is for users to report compatible hardware with loader in use. Please leave the following information: Loader version and type (3615xs, 3617xs or 916+): DSM version in use (including critical update): Using custom modules/ramdisk? If yes which one?: Hardware details (try being specific without giving long and useless technical details - model version, motherboard and NIC used should suffice): NO DOT INITIATE DISCUSSIONS OR ASK QUESTIONS HERE. Such posts will be deleted without warning. Quote Link to comment Share on other sites More sharing options...
MarsManden Posted October 16, 2017 Share #2 Posted October 16, 2017 Loader: Juns v1.02b, Internal USB stick DSM: 6.1.3U7 Hardware: HP Microserver Gen7, 2GB RAM, BIOS Mod O41100113.ROM, 5*4TB WD Red Quote Link to comment Share on other sites More sharing options...
Rockfire Posted October 16, 2017 Share #3 Posted October 16, 2017 Loader: Jun's v1.02b DSM: 6.1.3 U6 - DS3615xs No custom modules/ramdisk. Motherboard: Asrock Q1900-ITX Integrated NIC: Realtek RTL8111GR Integrated SATA: 2 ports by ASMedia ASM1061. The other two i have no clue, but they work just fine. Extra Sata card: Syba SATA III 4 Port PCI-e x1 Controller with Marvell 88SE9215 chipset Quote Link to comment Share on other sites More sharing options...
K-Li Posted October 18, 2017 Share #4 Posted October 18, 2017 Loader : Jun's v1.02b DSM : 6.1.3 U7 - DS3615Xs Tuner DVB-T USB with Chip RTL2838 Dual Gigabit chip intel 82574L Baremetal IBM X3200 M3 7328 Can't find the Sata controller model (ServeRAID probably...) Quote Link to comment Share on other sites More sharing options...
valuxin Posted November 13, 2017 Share #5 Posted November 13, 2017 Loader: Jun's v1.02b (3615xs) DSM: 6.1.4 U1 Hardware: Intel D525MW + 4Gb RAM + 2x 4Tb 2.5" HDD Updated from 6.1.3 U8 without any issues. Quote Link to comment Share on other sites More sharing options...
holyangel Posted November 17, 2017 Share #6 Posted November 17, 2017 Loader: Jun's v1.02(b?) (3617xs) DSM: 6.1.4 U1 Hardware: X58A-OC w/990x + 16Gb RAM + 4x 2Tb 3.5" HDD + 2x 480GB SSD RW Cache I also updated from 6.1.3 U8 without any issues. I'm also running bare metal on a dell r710 I believe it is, without issue. Quote Link to comment Share on other sites More sharing options...
Bohemian Posted November 19, 2017 Share #7 Posted November 19, 2017 Loader: Jun's v1.02b (3615xs)DSM: 6.1.4 U1Hardware: ASRock Z170 Extreme6 + 16Gb RAM + 5x 4TB 3.5" HDD Updated from 6.1.3 U8 without any issues. Quote Link to comment Share on other sites More sharing options...
holyangel Posted December 19, 2017 Share #8 Posted December 19, 2017 Loader: Jun's v1.02b (3617xs) BaremetalDSM: 6.1.4-15217 Update 3Hardware: Dell R720 w/perc 6I/R Dell R610 w/ H200 I've updated from initial release of loader up to latest update 3 with zero issues. 1 Quote Link to comment Share on other sites More sharing options...
bermaa Posted December 31, 2017 Share #9 Posted December 31, 2017 Loader: Jun's v1.02b DSM: DSM 6.1.4-15217 Update 5 - DS3615xs Custom Module: No Hardware: Motherboard: MSI AM1i v2.1 CPU: AMD 5150 Integrated NIC: Realtek® RTL8111G Integrated SATA: AMD SATA Extra Sata card: ASM1061 SATA Mini PCIe slot from aliexpress - actual chip is ASM1062 as reported by lspci Class 0106: Device 1b21:0612 (rev 01) Quote Link to comment Share on other sites More sharing options...
holyangel Posted January 3, 2018 Share #10 Posted January 3, 2018 Loader: Jun's v1.02b (3617xs) BaremetalDSM: 6.1.4-15217 Update 5Hardware: Dell R720 w/H200 Dell R610 w/ Perc 6I/R Zero issues here ^^ 1 Quote Link to comment Share on other sites More sharing options...
esme518 Posted January 17, 2018 Share #11 Posted January 17, 2018 Loader: Jun's v1.02b (916+) Baremetal + extra.lzma for ds916+ v4.5 DSM: DSM 6.1.4-15217 Update 5 Motherboard: Asrock N3700-ITX NIC: Realtek RTL8111GR(Onboard) + Realtek RTL8111D(PCIe) SATA: Intel(Onboard) + ASMedia ASM1061(Onboard) + ASMedia ASM1061(mini-PCIe) No issues so far. Also hardware transcoding works with a valid SN. 1 Quote Link to comment Share on other sites More sharing options...
Pro2ton Posted March 25, 2018 Share #12 Posted March 25, 2018 (edited) Loader: Jun's v1.02b (3615xs) DSM: 6.1.5-15254 Update 1 Motherboard: Gigabyte GA-N3150N-d2h CPU: Intel 4-core Celeron N3150 NIC: Realtek GbE LAN chip SATA: Intel N3150 (2x), ASMedia ASM1061 (2x) works great. Migration of data from DSM 5.1 without a problem! Edited March 25, 2018 by Pro2ton Quote Link to comment Share on other sites More sharing options...
sv000008 Posted April 11, 2018 Share #13 Posted April 11, 2018 Loader: Jun's v1.02b (Baremetal Install) DSM: 6.1.6-15266 - DS3615xs No custom modules/ramdisk. Hardware: Dell Optiplex 390 Intel i3 CPU 8GB RAM 1 x Seagate 80GB (Barracuda) 2 x Seagate Ironwolf (2TB) Standard machine other than hard disks Works flawlessly. 1 Quote Link to comment Share on other sites More sharing options...
NasNoobie Posted April 17, 2018 Share #14 Posted April 17, 2018 Hi there All, First time installing xpenology and I'm blown away by the experience. Many thanks to the mods and developers. Great work. Wanted to report a succes on: Dell Vostro 200s (Slim deskop) MBR bios, make sure you have the disk controller in RAID mode for AHCI support CPU - intel E8400 cpu 4 gb DDR2 ram both onboard network card as well as aftermarket gigabit (asus) network card were recognized perfectly boot using Sony Microvaul 8gb usb jun's v1.02b with Genesys MBR mod DS3615xs 6.1 Jun's Mod V1.02b (MBR_Genesys).img 250 gb hd (non raid) Very pleased with the performance and ease of instal. Thanks to all. Quote Link to comment Share on other sites More sharing options...
carlyang1986 Posted April 21, 2018 Share #15 Posted April 21, 2018 Loader: Jun's 1.02b 3615xs Platform: ECS TIGD2-CI, Intel D2550, 2GB DDR3 memory, 1 PCI-E 1X slot, and 2 SATAII port. DSM: 6.1.6 UP1 SATA: INTEL NM10(2x), asmedia1061(2x, PCIE port) HARDDISK: 2 set of Hitachi 3tb. I edit the grub.cfg, satamap=1 to satamap=222.The first time install DSM through website.The harddisk in port 5 and port 6(On asmedia1061) can be recognized, but the harddisk can't be recognized after DSM reboot. If I changed harddisk link to the sata port on moterboard it can be recognized and start DSM. Then if I have one harddisk on motherboard and another in asmediea 1061 the DSM can start and recognized the harddisk on port 5 or port 6.In the earlier DSM5.2 these 2 harddisk can be recognized both in the asmedia1061. Quote Link to comment Share on other sites More sharing options...
valix Posted May 18, 2018 Share #16 Posted May 18, 2018 (edited) NAS 1: Loader: Jun's 1.02b 3615xs Platform: Fujitsu D3417-B Mainboard w/ Intel Xeon E3-1220v5 (instead of a former used Pentium G4400) , Intel C236 Chipset, 8 GB Kingston DDR4 ECC RAM DSM: 6.1.6 UP1 SATA: intel C236 (onboard) LAN: Intel i219LM HDD: 3x 8 TB Seagate Ironwolf grub.cfg: Increased S/N and MAC by "1", because I've 2 Xpenology systems in the same subnet and changed USB Drive VID and PID. NAS 2 (Backup): Loader: Jun's 1.02b 3615xs Platform: HPE Microserver Gen 8, 4 +8 GB ECC DDR3 Kingston RAM, Intel C204 Chipset DSM: 6.1.6 UP1 SATA: P Dynamic Smart Array B120i as simple S-ATA controller - no HW-RAID function. (SW-)RAID is managed by DSM. LAN: 2x NC332i Broadcom BCM5720 HDD: 4x 6 TB Seagate Ironwolf grub.cfg: no changes. Edited May 18, 2018 by valix Quote Link to comment Share on other sites More sharing options...
deejay Posted June 4, 2018 Share #17 Posted June 4, 2018 Loader: Jun's 1.02b (3615xs) DSM version: DSM 6.1.7-15284 Custom modules/ramdisk?: None Hardware: Intel® NUC Kit D34010WYKH Just installed it over the weekend and has been up for about 12 hours now. Testing with an 1tb internal 2.5 inch SATA before I upgrade to a bigger drive. Quote Link to comment Share on other sites More sharing options...
thadrumr Posted June 6, 2018 Share #18 Posted June 6, 2018 (edited) Loader: Juns v1.02b, Random 512MB USB Stick DSM: 6.1.7-15284 Hardware: MSI M5A88-m AMD FX4300 4x2gb DDR3 3X2TB Seagate 2x1TB WD Black 1x500GB WD Blue LAN: 2xDell Broadcom Gigabit nic and onboard Gigabit Nic in a 3x1gb LACP LAG to Juniper EX2200 Switch Edited June 6, 2018 by thadrumr Quote Link to comment Share on other sites More sharing options...
muaddib81 Posted June 11, 2018 Share #19 Posted June 11, 2018 (edited) Loader: Jun's 1.02b 3615xsPlatform: HPE Microserver Gen7, AMD Turion™ II Neo N54L, 4GB RAM, modified BIOSDSM: 6.1.7-15284LAN: 2x NC107i PCIe Gigabit Server Adapter (BCM5723)HDD: 2x 2 TB WD RED, 1x 4TB WD RED in RAID5 Running two weeks, no problems! Edited June 11, 2018 by muaddib81 Bold keywords Quote Link to comment Share on other sites More sharing options...
flyride Posted June 22, 2018 Share #20 Posted June 22, 2018 (edited) Platform: ASRock J4105-ITX Loader: Jun's v1.02b DS916+ DSM: DSM 6.1.7-15284LAN: Realtek RTL8111H Gigabit SATA3: 2x Intel via chipset, 2x ASMedia ASM1061 (hot plugging supported on all ports) Comments: This is the Gemini Lake update of the ITX motherboard ASRock has been selling for years, and it runs XPEnology baremetal without special configs or drivers. Pros: 4x 2.4 Ghz cores and up to 32GB RAM (ignore the manual's 8GB limit). Hardware-accelerated video (Intel UHD 600) and AES-NI hardware encryption. On-board WiFi option. Only con is lack of expansion - only one PCI 2.0x1 slot. This board is basically a DS918+ with double the L2 cache and higher clocks. Can't go wrong for $85 USD if you want to build a simple 4-bay Plex-able XPEnology NAS. Edited June 22, 2018 by flyride 1 Quote Link to comment Share on other sites More sharing options...
vasyah Posted August 20, 2018 Share #21 Posted August 20, 2018 Loader: Jun's v1.02b 3615xs DSM: DSM 6.1.5-15254 Using custom modules/ramdisk: No Hardware details: HP ProLiant N54L G7 MicroServer Comments: Migrate from DSM 5.2 succesfull Quote Link to comment Share on other sites More sharing options...
Rowdy Posted September 26, 2018 Share #22 Posted September 26, 2018 On 6/22/2018 at 10:55 PM, flyride said: Platform: ASRock J4105-ITX Loader: Jun's v1.02b DS916+ DSM: DSM 6.1.7-15284LAN: Realtek RTL8111H Gigabit SATA3: 2x Intel via chipset, 2x ASMedia ASM1061 (hot plugging supported on all ports) Comments: This is the Gemini Lake update of the ITX motherboard ASRock has been selling for years, and it runs XPEnology baremetal without special configs or drivers. Pros: 4x 2.4 Ghz cores and up to 32GB RAM (ignore the manual's 8GB limit). Hardware-accelerated video (Intel UHD 600) and AES-NI hardware encryption. On-board WiFi option. Only con is lack of expansion - only one PCI 2.0x1 slot. This board is basically a DS918+ with double the L2 cache and higher clocks. Can't go wrong for $85 USD if you want to build a simple 4-bay Plex-able XPEnology NAS. Platform: ASRock J4105-ITX Loader: Jun's v1.03a2 DS918 DSM: DSM 6.2-23739LAN: Realtek RTL8111H Gigabit SATA3: 2x Intel via chipset, 2x ASMedia ASM1061 (hot plugging supported on all ports) Comments: After reading the post above (thanks for that) I've just bought this and added 16GB of RAM. At install, I just installed it from the web (no pat) and updated it to this last version in the update panel. No probs at all. Quote Link to comment Share on other sites More sharing options...
Homeless Posted October 5, 2018 Share #23 Posted October 5, 2018 (edited) NAS 1 Platform: Netgear ReadyNAS RN312 upgraded with 4GB Ram Loader: Jun's 1.02b (3615xs) DSM version: DSM 6.1.7-15284 Custom modules/ramdisk?: None Comments: Has been up and running for 2 months without issue. I specifically set this unit up with 2 8TB Ironwolf drives to sync my family's 6 MS OneDrive accounts. NIC's are bonded and can transfer files from 2 clients each at 109MB/sec. everything operates perfectly without any modifications. This unit has an hdmi port and the bios is accessible to make and external usb drive the first boot device and not have to physically press a button on the unit to have it boot from the external usb drive. This will also keep the onboard netgear os intact only requiring removal of the external usb and a reboot to go back to the netgear os. NAS 2 Platform: Netgear ReadyNAS RN516 upgraded CPU with Xeon e3-1265L v2 and 16GB ECC Ram Loader: Jun's 1.02b (3615xs) DSM version: DSM 6.1.7-15284 Custom modules/ramdisk?: None Comments: Has been up and running for 4 months without issue. I use this unit as a Plex Media Server. Populated with 6 4TB Ironwolf drives. NIC's are bonded and can transfer files from 2 wired clients each at 109MB/sec. Internally everything operates correctly, However the front door of this unit has a small status/info screen that does not work and the touch pad on the door illuminates when touched but other that that it has no function (its a netgear gimmick anyway considering its a device that is designed to be controlled remotely) This unit has an hdmi port and the bios is accessible to make and external usb drive the first boot device and not have to physically press a button on the unit to have it boot from the external usb drive. This will also keep the onboard netgear os intact only requiring removal of the external usb and a reboot to go back to the netgear os. Edited October 5, 2018 by Homeless Quote Link to comment Share on other sites More sharing options...
ACiDxCHRiST Posted October 24, 2018 Share #24 Posted October 24, 2018 (edited) Loader: jun v1.02b (DS3615xs) DSM: 6.1.7-15284 Update 2 Custom ramdisk: IG-88 Driver extension jun 1.02b/DSM6.1.x for 3615xs v4.9_test CPU: AMD Ryzen 7 1700X Mobo: ASUS ROG Strix X370-F Gaming LAN: Intel I350-T2 (bonded) HBA: LSI 9300-8i (IT mode) HDD: Lots of Reds (8x Chipset SATA, 8x HBA) Edited October 24, 2018 by ACiDxCHRiST Quote Link to comment Share on other sites More sharing options...
woodant Posted November 2, 2018 Share #25 Posted November 2, 2018 (edited) Loader: jun v1.02b (DS3617xs) DSM: 6.1.4-15217 Update 1 CPU: Intel i7 5820k Mobo: GA-X99-UD3 LAN: Internal Intel® GbE LAN RAM: 32GB Edited November 2, 2018 by woodant adding Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.