Polanskiman

User Reported Compatibility Thread for DSM 6.1

Recommended Posts

This topic is for users to report compatible hardware with loader in use. Please leave the following information:

 

Loader version and type (3615xs, 3617xs or 916+):

DSM version in use (including critical update):

Using custom modules/ramdisk? If yes which one?:

Hardware details (try being specific without giving long and useless technical details - model version, motherboard and NIC used should suffice):

 

NO DOT INITIATE DISCUSSIONS OR ASK QUESTIONS HERE. Such posts will be deleted without warning.

 

Share this post


Link to post
Share on other sites

Loader: Juns v1.02b, Internal USB stick

DSM: 6.1.3U7

Hardware: HP Microserver Gen7, 2GB RAM, BIOS Mod O41100113.ROM, 5*4TB WD Red

Share this post


Link to post
Share on other sites

Loader: Jun's v1.02b

DSM: 6.1.3 U6   - DS3615xs

No custom modules/ramdisk.

 

Motherboard: Asrock Q1900-ITX 

Integrated NIC: Realtek RTL8111GR

Integrated SATA: 2 ports by ASMedia ASM1061.  The other two i have no clue, but they work just fine.

Extra Sata card:  Syba SATA III 4 Port PCI-e x1 Controller with Marvell 88SE9215 chipset

Share this post


Link to post
Share on other sites

Loader : Jun's v1.02b

DSM : 6.1.3 U7 - DS3615Xs

Tuner DVB-T USB with Chip RTL2838

Dual Gigabit chip intel 82574L

Baremetal IBM X3200 M3 7328 

Can't find the Sata controller model (ServeRAID probably...)

 

 

Share this post


Link to post
Share on other sites

Loader: Jun's v1.02b (3615xs)

DSM: 6.1.4 U1

Hardware: Intel D525MW + 4Gb RAM + 2x 4Tb 2.5" HDD

 

Updated from 6.1.3 U8 without any issues.

Share this post


Link to post
Share on other sites

Loader: Jun's v1.02(b?) (3617xs)

DSM: 6.1.4 U1

Hardware: X58A-OC w/990x + 16Gb RAM + 4x 2Tb 3.5" HDD + 2x 480GB SSD RW Cache

 

I also updated from 6.1.3 U8 without any issues. I'm also running bare metal on a dell r710 I believe it is, without issue.

Share this post


Link to post
Share on other sites

Loader: Jun's v1.02b (3615xs)
DSM: 6.1.4 U1
Hardware: ASRock Z170 Extreme6 + 16Gb RAM + 5x 4TB 3.5" HDD
 
Updated from 6.1.3 U8 without any issues.

 

Share this post


Link to post
Share on other sites

Loader: Jun's v1.02b (3617xs) Baremetal
DSM: 6.1.4-15217 Update 3
Hardware

Dell R720 w/perc 6I/R
Dell R610 w/ H200

 
I've updated from initial release of loader up to latest update 3 with zero issues.

Share this post


Link to post
Share on other sites

Loader: Jun's v1.02b

DSM: DSM 6.1.4-15217 Update 5   - DS3615xs

Custom Module: No

Hardware:

Motherboard: MSI AM1i v2.1

CPU: AMD 5150

Integrated NIC: Realtek® RTL8111G

Integrated SATA: AMD SATA

Extra Sata card: ASM1061 SATA Mini PCIe slot from aliexpress - actual chip is ASM1062 as reported by lspci Class 0106: Device 1b21:0612 (rev 01)

Share this post


Link to post
Share on other sites

Loader: Jun's v1.02b (3617xs) Baremetal
DSM: 6.1.4-15217 Update 5
Hardware

Dell R720 w/H200
Dell R610 w/ Perc 6I/R

 
Zero issues here ^^

Share this post


Link to post
Share on other sites

Loader: Jun's v1.02b (916+) Baremetal + extra.lzma for ds916+ v4.5

DSM: DSM 6.1.4-15217 Update 5

Motherboard: Asrock N3700-ITX

NIC: Realtek RTL8111GR(Onboard) + Realtek RTL8111D(PCIe)

SATA: Intel(Onboard) + ASMedia ASM1061(Onboard) + ASMedia ASM1061(mini-PCIe)

 

No issues so far. Also hardware transcoding works with a valid SN.

  • Thanks 1

Share this post


Link to post
Share on other sites
Posted (edited)

Loader: Jun's v1.02b (3615xs)

DSM: 6.1.5-15254 Update 1

Motherboard: Gigabyte GA-N3150N-d2h

CPU: Intel 4-core Celeron N3150

NIC: Realtek GbE LAN chip

SATA: Intel N3150 (2x), ASMedia ASM1061 (2x)

 

works great. Migration of data from DSM 5.1 without a problem!

Edited by Pro2ton

Share this post


Link to post
Share on other sites

Loader: Jun's v1.02b (Baremetal Install)

DSM: 6.1.6-15266  - DS3615xs

No custom modules/ramdisk.

 

Hardware: 

Dell Optiplex 390

  • Intel i3 CPU
  • 8GB RAM
  • 1 x Seagate 80GB (Barracuda)
  • 2 x Seagate Ironwolf (2TB)

Standard machine other than hard disks

 

Works flawlessly.

 

  • Like 1

Share this post


Link to post
Share on other sites

Hi there All,

 

First time installing xpenology and I'm blown away by the experience.  Many thanks to the mods and developers.  Great work.

Wanted to report a succes on:

 

Dell Vostro 200s (Slim deskop)

MBR bios, make sure you have the disk controller in RAID mode for AHCI support

CPU - intel E8400 cpu

4 gb DDR2 ram

both onboard network card as well as aftermarket gigabit (asus) network card were recognized perfectly

boot using Sony Microvaul 8gb usb

jun's v1.02b with Genesys MBR mod

DS3615xs 6.1 Jun's Mod V1.02b (MBR_Genesys).img 

250 gb hd (non raid)

 

Very pleased with the performance and ease of instal.

 

Thanks to all.

Share this post


Link to post
Share on other sites

Loader: Jun's 1.02b 3615xs

Platform: ECS TIGD2-CI, Intel D2550, 2GB DDR3 memory, 1 PCI-E 1X slot, and 2 SATAII port.

DSM: 6.1.6 UP1

SATA: INTEL NM10(2x), asmedia1061(2x, PCIE port)

HARDDISK: 2 set of Hitachi 3tb.

I edit the grub.cfg, satamap=1 to satamap=222.The first time install DSM through website.The harddisk in port 5 and port 6(On asmedia1061) can be recognized, but the harddisk can't be recognized after DSM reboot. If I changed harddisk link to the sata port on moterboard it can be recognized and start DSM. Then if I have one harddisk on motherboard and another in asmediea 1061 the DSM can start and recognized the harddisk on port 5 or port 6.In the earlier DSM5.2 these 2 harddisk can be recognized both in the asmedia1061. 

 

 

 

Share this post


Link to post
Share on other sites
Posted (edited)

NAS 1:

Loader: Jun's 1.02b 3615xs

Platform: Fujitsu D3417-B Mainboard w/ Intel Xeon E3-1220v5 (instead of a former used Pentium G4400) ,  Intel C236 Chipset, 8 GB Kingston DDR4 ECC RAM

DSM: 6.1.6 UP1

SATA: intel C236 (onboard)

LAN: Intel i219LM

HDD: 3x 8 TB Seagate Ironwolf

grub.cfg: Increased S/N and MAC by "1", because I've 2 Xpenology systems in the same subnet and changed USB Drive VID and PID.

 

NAS 2 (Backup):

Loader: Jun's 1.02b 3615xs

Platform: HPE Microserver Gen 8, 4 +8 GB ECC DDR3 Kingston RAM, Intel C204 Chipset

DSM: 6.1.6 UP1

SATA: P Dynamic Smart Array B120i as simple S-ATA controller - no HW-RAID function. (SW-)RAID is managed by DSM.

LAN: 2x NC332i Broadcom BCM5720

HDD: 4x 6 TB Seagate Ironwolf

grub.cfg: no changes.

Edited by valix

Share this post


Link to post
Share on other sites

Loader: Jun's 1.02b (3615xs)

DSM version: DSM 6.1.7-15284

Custom modules/ramdisk?: None

HardwareIntel® NUC Kit D34010WYKH

 

Just installed it over the weekend and has been up for about 12 hours now. Testing with an 1tb internal 2.5 inch SATA before I upgrade to a bigger drive.

Share this post


Link to post
Share on other sites
Posted (edited)

Loader: Juns v1.02b, Random 512MB USB Stick

DSM: 6.1.7-15284

Hardware: MSI M5A88-m AMD FX4300 4x2gb DDR3 3X2TB Seagate 2x1TB WD Black 1x500GB WD Blue

LAN:  2xDell Broadcom Gigabit nic and onboard Gigabit Nic in a 3x1gb LACP LAG to Juniper EX2200 Switch

Edited by thadrumr

Share this post


Link to post
Share on other sites
Posted (edited)

Loader: Jun's 1.02b 3615xs
Platform: HPE Microserver Gen7, AMD Turion™ II Neo N54L, 4GB RAM, modified BIOS
DSM: 6.1.7-15284
LAN: 2x NC107i PCIe Gigabit Server Adapter (BCM5723)
HDD: 2x 2 TB WD RED, 1x 4TB WD RED in RAID5
 

Running two weeks, no problems!

Edited by muaddib81
Bold keywords

Share this post


Link to post
Share on other sites
Posted (edited)

Platform: ASRock J4105-ITX

Loader: Jun's v1.02b DS916+

DSM: DSM 6.1.7-15284
LAN: Realtek RTL8111H Gigabit

SATA3: 2x Intel via chipset, 2x ASMedia ASM1061 (hot plugging supported on all ports)

Comments: This is the Gemini Lake update of the ITX motherboard ASRock has been selling for years, and it runs XPEnology baremetal without special configs or drivers.

Pros: 4x 2.4 Ghz cores and up to 32GB RAM (ignore the manual's 8GB limit). Hardware-accelerated video (Intel UHD 600) and AES-NI hardware encryption. On-board WiFi option.

Only con is lack of expansion - only one PCI 2.0x1 slot.

 

This board is basically a DS918+ with double the L2 cache and higher clocks.  Can't go wrong for $85 USD if you want to build a simple 4-bay Plex-able XPEnology NAS.

Edited by flyride
  • Like 1

Share this post


Link to post
Share on other sites

Loader: Jun's v1.02b 3615xs

DSM: DSM 6.1.5-15254

Using custom modules/ramdisk: No

Hardware details: HP ProLiant N54L G7 MicroServer

Comments: Migrate from DSM 5.2 succesfull

Share this post


Link to post
Share on other sites
On 6/22/2018 at 10:55 PM, flyride said:

Platform: ASRock J4105-ITX

Loader: Jun's v1.02b DS916+

DSM: DSM 6.1.7-15284
LAN: Realtek RTL8111H Gigabit

SATA3: 2x Intel via chipset, 2x ASMedia ASM1061 (hot plugging supported on all ports)

Comments: This is the Gemini Lake update of the ITX motherboard ASRock has been selling for years, and it runs XPEnology baremetal without special configs or drivers.

Pros: 4x 2.4 Ghz cores and up to 32GB RAM (ignore the manual's 8GB limit). Hardware-accelerated video (Intel UHD 600) and AES-NI hardware encryption. On-board WiFi option.

Only con is lack of expansion - only one PCI 2.0x1 slot.

 

This board is basically a DS918+ with double the L2 cache and higher clocks.  Can't go wrong for $85 USD if you want to build a simple 4-bay Plex-able XPEnology NAS.

 

 

Platform: ASRock J4105-ITX

Loader: Jun's v1.03a2 DS918

DSM: DSM 6.2-23739
LAN: Realtek RTL8111H Gigabit

SATA3: 2x Intel via chipset, 2x ASMedia ASM1061 (hot plugging supported on all ports)

Comments: After reading the post above (thanks for that) I've just bought this and added 16GB of RAM. At install, I just installed it from the web (no pat) and updated it to this last version in the update panel. No probs at all.

Share this post


Link to post
Share on other sites
Posted (edited)

NAS 1

Platform: Netgear ReadyNAS RN312 upgraded with 4GB Ram

Loader: Jun's 1.02b (3615xs)

DSM version: DSM 6.1.7-15284

Custom modules/ramdisk?: None

Comments: Has been up and running for 2 months without issue. I specifically set this unit up with 2 8TB Ironwolf drives to sync my family's 6 MS OneDrive accounts. NIC's are bonded and can transfer files from 2 clients each at 109MB/sec. everything operates perfectly without any modifications. This unit has an hdmi port and the bios is accessible to make and external usb drive the first boot device and not have to physically press a button on the unit to have it boot from the external usb drive. This will also keep the onboard netgear os intact only requiring removal of the external usb and a reboot to go back to the netgear os.

 

NAS 2

Platform: Netgear ReadyNAS RN516 upgraded CPU with Xeon e3-1265L v2 and 16GB ECC Ram

Loader: Jun's 1.02b (3615xs)

DSM version: DSM 6.1.7-15284

Custom modules/ramdisk?: None

Comments: Has been up and running for 4 months without issue. I use this unit as a Plex Media Server. Populated with 6 4TB Ironwolf drives. NIC's are bonded and can transfer files from 2 wired clients each at 109MB/sec. Internally everything operates correctly, However the front door of this unit has a small status/info screen that does not work and the touch pad on the door illuminates when touched but other that that it has no function (its a netgear gimmick anyway considering its a device that is designed to be controlled remotely) This unit has an hdmi port and the bios is accessible to make and external usb drive the first boot device and not have to physically press a button on the unit to have it boot from the external usb drive. This will also keep the onboard netgear os intact only requiring removal of the external usb and a reboot to go back to the netgear os.

 

 

Edited by Homeless

Share this post


Link to post
Share on other sites

Loader: jun v1.02b (DS3615xs)

DSM: 6.1.7-15284 Update 2

Custom ramdisk: IG-88 Driver extension jun 1.02b/DSM6.1.x for 3615xs v4.9_test

CPU: AMD Ryzen 7 1700X

Mobo: ASUS ROG Strix X370-F Gaming

LAN: Intel I350-T2 (bonded)

HBA: LSI 9300-8i (IT mode)

HDD: Lots of Reds (8x Chipset SATA, 8x HBA)

Edited by ACiDxCHRiST

Share this post


Link to post
Share on other sites

Loader: jun v1.02b (DS3617xs)

DSM: 6.1.4-15217 Update 1

CPU: Intel i7 5820k

Mobo: GA-X99-UD3

LAN: Internal Intel® GbE LAN

RAM: 32GB

Edited by woodant
adding

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now