cityscoundrel

DSM 6.1.3-15152 Update 5

Recommended Posts

Update to 5 without problems.

 

DS3615XS Bare Metal, HP Gen8 Microserver with E3 - 1265V2 CPU !

Share this post


Link to post
Share on other sites
On ‎9‎/‎26‎/‎2017 at 8:32 AM, djiks said:

Just updated my Xpenology test environment from 6.1.3-15152 update 4 to update 5 (N54L / ESXI / Jun's loader 1.02b).

 

Everything seems to be OK after reboot

Sorry, but I don't care "OK after reboot", instead I care much about the timebomb after reboot in the next few weeks. I don't have a test machine, so I really don't want to risk my own value data for nothing.

Thanks, guys anyway.

Share this post


Link to post
Share on other sites
On 9/27/2017 at 11:37 PM, Elpee said:
Sorry, but I don't care "OK after reboot", instead I care much about the timebomb after reboot in the next few weeks. I don't have a test machine, so I really don't want to risk my own value data for nothing.

Thanks, guys anyway.

 

That's exactly why you should wait.

 

If you don't care about the "ok after reboot" and don't have a test machine then it's clear your should NOT update. It is as simple as waiting a few days that enough people have applied update 5. The late "time bomb" issue usually took 12, 24 or even 36 hours to appear. If there was any issue with this update I believe people would have reported it by now.

 

As a side note, you can actually build a VM test machine. There is no need for additional hardware. Simply download VirtualBox (it's free) and virtualise DSM on your laptop/computer. That's what I do on my MAC to test new updates and loaders.

59cc5e00757f2_ScreenShot2017-09-28at9_22_45AM.thumb.jpg.2779b523d8b0c90e1b0ee4ba7937c9b7.jpg

 

  • Like 1

Share this post


Link to post
Share on other sites

I have a HP microserver Gen8 barebone with jun's loader 1.02 and just updated to "update 5" and I have only ssh acces to my DMS installation now.

 

 

at first it worked, but after a couple of hours nothing works.

when trying to acces the DMS i get this

 

running dmesg I see this:

dmesg  

 

root@DiskStation:~# dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.102 (root@build3) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #15152 SMP Fri Sep 1 11:14:41 CST 2017
[    0.000000] Command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3617xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=1330ODN054774 mac1=98f2b3f71704 netif_num=1 vid=0x1F75 pid=0x0917
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009bc00-0x000000000009bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000adde3fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000adde4000-0x00000000addedfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000addee000-0x00000000bbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000247ffefff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: HP ProLiant MicroServer Gen8, BIOS J06 11/02/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x247fff max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0B8000000 mask FF8000000 uncachable
[    0.000000]   1 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] e820: last_pfn = 0xadde4 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [ffff8800000f4f80]
[    0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01ab7000, 0x01ab7fff] PGTABLE
[    0.000000] BRK [0x01ab8000, 0x01ab8fff] PGTABLE
[    0.000000] BRK [0x01ab9000, 0x01ab9fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x247c00000-0x247dfffff]
[    0.000000]  [mem 0x247c00000-0x247dfffff] page 2M
[    0.000000] BRK [0x01aba000, 0x01abafff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x244000000-0x247bfffff]
[    0.000000]  [mem 0x244000000-0x247bfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x243ffffff]
[    0.000000]  [mem 0x200000000-0x243ffffff] page 2M
[    0.000000] BRK [0x01abb000, 0x01abbfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0xadde3fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xadbfffff] page 2M
[    0.000000]  [mem 0xadc00000-0xadde3fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 2M
[    0.000000] BRK [0x01abc000, 0x01abcfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x247e00000-0x247ffefff]
[    0.000000]  [mem 0x247e00000-0x247ffefff] page 4k
[    0.000000] RAMDISK: [mem 0x3700e000-0x377fefff]
[    0.000000] ACPI: RSDP 0x00000000000F4F00 00024 (v02 HP    )
[    0.000000] ACPI: XSDT 0x00000000ADDE6400 000B4 (v01 HP     ProLiant 00000002 \xffffffd2?   0000162E)
[    0.000000] ACPI: FACP 0x00000000ADDE6540 000F4 (v03 HP     ProLiant 00000002 \xffffffd2?   0000162E)
[    0.000000] ACPI: DSDT 0x00000000ADDE6640 01C1A (v01 HP     DSDT     00000001 INTL 20030228)
[    0.000000] ACPI: FACS 0x00000000ADDE4140 00040
[    0.000000] ACPI: SPCR 0x00000000ADDE4180 00050 (v01 HP     SPCRRBSU 00000001 \xffffffd2?   0000162E)
[    0.000000] ACPI: MCFG 0x00000000ADDE4200 0003C (v01 HP     ProLiant 00000001      00000000)
[    0.000000] ACPI: HPET 0x00000000ADDE4240 00038 (v01 HP     ProLiant 00000002 \xffffffd2?   0000162E)
[    0.000000] ACPI: FFFF 0x00000000ADDE4280 00064 (v02 HP     ProLiant 00000002 \xffffffd2?   0000162E)
[    0.000000] ACPI: SPMI 0x00000000ADDE4300 00040 (v05 HP     ProLiant 00000001 \xffffffd2?   0000162E)
[    0.000000] ACPI: ERST 0x00000000ADDE4340 00230 (v01 HP     ProLiant 00000001 \xffffffd2?   0000162E)
[    0.000000] ACPI: APIC 0x00000000ADDE4580 00252 (v01 HP     ProLiant 00000002      00000000)
[    0.000000] ACPI: FFFF 0x00000000ADDE4800 00176 (v01 HP     ProLiant 00000001 \xffffffd2?   0000162E)
[    0.000000] ACPI: BERT 0x00000000ADDE4980 00030 (v01 HP     ProLiant 00000001 \xffffffd2?   0000162E)
[    0.000000] ACPI: HEST 0x00000000ADDE49C0 000BC (v01 HP     ProLiant 00000001 \xffffffd2?   0000162E)
[    0.000000] ACPI: FFFF 0x00000000ADDE4A80 01914 (v01 HP     ProLiant 00000001 \xffffffd2?   0000162E)
[    0.000000] ACPI: FFFF 0x00000000ADDE63C0 0002D (v01 HP     ProLiant 00000001      00000000)
[    0.000000] ACPI: SSDT 0x00000000ADDE8280 00137 (v03 HP     CRSPCI0  00000002 HP   00000001)
[    0.000000] ACPI: SSDT 0x00000000ADDE83C0 00177 (v03 HP     riser0   00000002 INTL 20030228)
[    0.000000] ACPI: SSDT 0x00000000ADDE8540 001E1 (v01 HP     pcc      00000001 INTL 20090625)
[    0.000000] ACPI: SSDT 0x00000000ADDE8740 00377 (v01 HP     pmab     00000001 INTL 20090625)
[    0.000000] ACPI: SSDT 0x00000000ADDE8AC0 00504 (v01 INTEL  PPM RCM  80000001 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000]  [ffffea0000000000-ffffea0007ffffff] PMD -> [ffff88023f600000-ffff8802465fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x247ffefff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009afff]
[    0.000000]   node   0: [mem 0x00100000-0xadde3fff]
[    0.000000]   node   0: [mem 0x100000000-0x247ffefff]
[    0.000000] On node 0 totalpages: 2055549
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3994 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9681 pages used for memmap
[    0.000000]   DMA32 zone: 708068 pages, LIFO batch:31
[    0.000000]   Normal zone: 18368 pages used for memmap
[    0.000000]   Normal zone: 1343487 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x908
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: 64 Processors exceeds NR_CPUS limit of 16
[    0.000000] smpboot: Allowing 16 CPUs, 14 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000adde4000 - 00000000addee000
[    0.000000] PM: Registered nosave memory: 00000000addee000 - 00000000bc000000
[    0.000000] PM: Registered nosave memory: 00000000bc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fee10000
[    0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ff800000
[    0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
[    0.000000] e820: [mem 0xbc000000-0xfebfffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] PERCPU: Embedded 24 pages/cpu @ffff880247a00000 s69376 r8192 d20736 u131072
[    0.000000] pcpu-alloc: s69376 r8192 d20736 u131072 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2027423
[    0.000000] Kernel command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3617xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=1330ODN054774 mac1=98f2b3f71704 netif_num=1 vid=0x1F75 pid=0x0917
[    0.000000] Power on seq num: 0
[    0.000000] Synology Hardware Version: DS3617xs-j
[    0.000000] Vender format version: 2
[    0.000000] Serial Number: 1330ODN054774
[    0.000000] Mac1: 98f2b3f71704
[    0.000000] Internal netif num: 1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Memory: 8008240k/9568252k available (4809k kernel code, 1346056k absent, 213956k reserved, 3797k data, 760k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:808 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 33030144 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.001000] tsc: Detected 2294.749 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.49 BogoMIPS (lpj=2294749)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000032] Security Framework initialized
[    0.000039] AppArmor: AppArmor initialized
[    0.000047] Mount-cache hash table entries: 256
[    0.000199] Initializing cgroup subsys memory
[    0.000208] Initializing cgroup subsys devices
[    0.000210] Initializing cgroup subsys freezer
[    0.000212] Initializing cgroup subsys blkio
[    0.000234] CPU: Physical Processor ID: 0
[    0.000235] CPU: Processor Core ID: 0
[    0.000239] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
               ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.000242] mce: CPU supports 7 MCE banks
[    0.000252] CPU0: Thermal monitoring enabled (TM1)
[    0.000260] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
               Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
               tlb_flushall_shift: 2
[    0.000360] Freeing SMP alternatives: 24k freed
[    0.000366] ACPI: Core revision 20130328
[    0.001390] ACPI: All ACPI Tables successfully acquired
[    0.001574] Switched APIC routing to physical flat.
[    0.001978] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.011974] smpboot: CPU0: Intel(R) Celeron(R) CPU G1610T @ 2.30GHz (fam: 06, model: 3a, stepping: 09)
[    0.011979] TSC deadline timer enabled
[    0.011988] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Broken BIOS detected, complain to your hardware vendor.
[    0.011994] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
[    0.012169] Intel PMU driver.
[    0.012171] ... version:                3
[    0.012172] ... bit width:              48
[    0.012173] ... generic registers:      8
[    0.012174] ... value mask:             0000ffffffffffff
[    0.012175] ... max period:             000000007fffffff
[    0.012176] ... fixed-purpose events:   3
[    0.012176] ... event mask:             00000007000000ff
[    0.012415] smpboot: Booting Node   0, Processors  #1
[    0.025650] Brought up 2 CPUs
[    0.025653] smpboot: Total of 2 processors activated (9178.99 BogoMIPS)
[    0.026671] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.027695] devtmpfs: initialized
[    0.028133] xor: measuring software checksum speed
[    0.037644]    prefetch64-sse:  8988.000 MB/sec
[    0.047651]    generic_sse:  8240.000 MB/sec
[    0.047653] xor: using function: prefetch64-sse (8988.000 MB/sec)
[    0.047712] NET: Registered protocol family 16
[    0.048160] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.048162] ACPI: bus type PCI registered
[    0.048257] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xb8000000-0xbbffffff] (base 0xb8000000)
[    0.048260] PCI: MMCONFIG at [mem 0xb8000000-0xbbffffff] reserved in E820
[    0.048305] PCI: Using configuration type 1 for base access
[    0.051433] bio: create slab <bio-0> at 0
[    0.067679] raid6: sse2x1   gen()  4414 MB/s
[    0.084692] raid6: sse2x1   xor()  3488 MB/s
[    0.101696] raid6: sse2x2   gen()  5488 MB/s
[    0.118709] raid6: sse2x2   xor()  3917 MB/s
[    0.135805] raid6: sse2x4   gen()  6371 MB/s
[    0.152810] raid6: sse2x4   xor()  6796 MB/s
[    0.152812] raid6: using algorithm sse2x4 gen() (6371 MB/s)
[    0.152813] raid6: .... xor() 6796 MB/s, rmw enabled
[    0.152814] raid6: using ssse3x2 recovery algorithm
[    0.152839] ACPI: Added _OSI(Module Device)
[    0.152840] ACPI: Added _OSI(Processor Device)
[    0.152842] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.152843] ACPI: Added _OSI(Processor Aggregator Device)
[    0.153165] ACPI: EC: Look up EC in DSDT
[    0.154226] ACPI: Interpreter enabled
[    0.154235] ACPI: (supports S0 S4 S5)
[    0.154236] ACPI: Using IOAPIC for interrupt routing
[    0.154277] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.154316] ACPI: No dock devices found.
[    0.157210] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-14])
[    0.157267] acpi PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff]; [mem 0xfed00000-0xfed44fff] ignored
[    0.157305] PCI host bridge to bus 0000:00
[    0.157308] pci_bus 0000:00: root bus resource [bus 00-14]
[    0.157309] pci_bus 0000:00: root bus resource [mem 0xbc000000-0xfbffffff]
[    0.157311] pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
[    0.157313] pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
[    0.157314] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
[    0.157315] pci_bus 0000:00: root bus resource [io  0x0d00-0x0fff]
[    0.157317] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed44fff]
[    0.157318] pci_bus 0000:00: root bus resource [io  0x03b0-0x03bb]
[    0.157320] pci_bus 0000:00: root bus resource [io  0x03c0-0x03df]
[    0.157321] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.157330] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[    0.157417] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.157497] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.157572] pci 0000:00:06.0: [8086:015d] type 01 class 0x060400
[    0.157601] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.157689] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.157710] pci 0000:00:1a.0: reg 10: [mem 0xfacf0000-0xfacf03ff]
[    0.157799] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.157871] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.157947] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.158016] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.158088] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.158155] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[    0.158226] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.158291] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[    0.158363] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.158433] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.158454] pci 0000:00:1d.0: reg 10: [mem 0xface0000-0xface03ff]
[    0.158543] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.158605] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.158705] pci 0000:00:1f.0: [8086:1c54] type 00 class 0x060100
[    0.158873] pci 0000:00:1f.2: [8086:1c04] type 00 class 0x010400
[    0.158890] pci 0000:00:1f.2: reg 10: [io  0x10c0-0x10c7]
[    0.158897] pci 0000:00:1f.2: reg 14: [io  0x10c8-0x10cb]
[    0.158904] pci 0000:00:1f.2: reg 18: [io  0x10d0-0x10d7]
[    0.158911] pci 0000:00:1f.2: reg 1c: [io  0x10d8-0x10db]
[    0.158918] pci 0000:00:1f.2: reg 20: [io  0x10e0-0x10ff]
[    0.158926] pci 0000:00:1f.2: reg 24: [mem 0xfacd0000-0xfacd07ff]
[    0.158969] pci 0000:00:1f.2: PME# supported from D3hot
[    0.159097] pci 0000:00:01.0: PCI bridge to [bus 07]
[    0.159156] pci 0000:02:00.0: [1590:005f] type 00 class 0x058000
[    0.159170] pci 0000:02:00.0: reg 10: [mem 0xc0000000-0xdfffffff 64bit pref]
[    0.159180] pci 0000:02:00.0: reg 18: [mem 0xfbef0000-0xfbef7fff 64bit]
[    0.160831] pci 0000:00:06.0: PCI bridge to [bus 02]
[    0.160835] pci 0000:00:06.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.160840] pci 0000:00:06.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[    0.160944] pci 0000:00:1c.0: PCI bridge to [bus 0d]
[    0.161042] pci 0000:03:00.0: [14e4:165f] type 00 class 0x020000
[    0.161066] pci 0000:03:00.0: reg 10: [mem 0xfabf0000-0xfabfffff 64bit pref]
[    0.161085] pci 0000:03:00.0: reg 18: [mem 0xfabe0000-0xfabeffff 64bit pref]
[    0.161104] pci 0000:03:00.0: reg 20: [mem 0xfabd0000-0xfabdffff 64bit pref]
[    0.161117] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.161196] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.161273] pci 0000:03:00.1: [14e4:165f] type 00 class 0x020000
[    0.161297] pci 0000:03:00.1: reg 10: [mem 0xfabc0000-0xfabcffff 64bit pref]
[    0.161316] pci 0000:03:00.1: reg 18: [mem 0xfabb0000-0xfabbffff 64bit pref]
[    0.161335] pci 0000:03:00.1: reg 20: [mem 0xfaba0000-0xfabaffff 64bit pref]
[    0.161348] pci 0000:03:00.1: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.161427] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
[    0.162853] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.162873] pci 0000:00:1c.4:   bridge window [mem 0xfab00000-0xfabfffff 64bit pref]
[    0.162979] pci 0000:04:00.0: [1912:0014] type 00 class 0x0c0330
[    0.163014] pci 0000:04:00.0: reg 10: [mem 0xfbff0000-0xfbff1fff 64bit]
[    0.163191] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.165837] pci 0000:00:1c.6: PCI bridge to [bus 04]
[    0.165844] pci 0000:00:1c.6:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.165949] pci 0000:01:00.0: [103c:3306] type 00 class 0x088000
[    0.165968] pci 0000:01:00.0: reg 10: [io  0x3000-0x30ff]
[    0.165982] pci 0000:01:00.0: reg 14: [mem 0xfbdf0000-0xfbdf01ff]
[    0.165995] pci 0000:01:00.0: reg 18: [io  0x3400-0x34ff]
[    0.166176] pci 0000:01:00.1: [102b:0533] type 00 class 0x030000
[    0.166194] pci 0000:01:00.1: reg 10: [mem 0xbf000000-0xbfffffff pref]
[    0.166208] pci 0000:01:00.1: reg 14: [mem 0xfbde0000-0xfbde3fff]
[    0.166221] pci 0000:01:00.1: reg 18: [mem 0xfb000000-0xfb7fffff]
[    0.166398] pci 0000:01:00.2: [103c:3307] type 00 class 0x088000
[    0.166417] pci 0000:01:00.2: reg 10: [io  0x3800-0x38ff]
[    0.166430] pci 0000:01:00.2: reg 14: [mem 0xfaff0000-0xfaff00ff]
[    0.166443] pci 0000:01:00.2: reg 18: [mem 0xfae00000-0xfaefffff]
[    0.166457] pci 0000:01:00.2: reg 1c: [mem 0xfad80000-0xfadfffff]
[    0.166470] pci 0000:01:00.2: reg 20: [mem 0xfad70000-0xfad77fff]
[    0.166483] pci 0000:01:00.2: reg 24: [mem 0xfad60000-0xfad67fff]
[    0.166497] pci 0000:01:00.2: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.166560] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
[    0.166631] pci 0000:01:00.4: [103c:3300] type 00 class 0x0c0300
[    0.166697] pci 0000:01:00.4: reg 20: [io  0x3c00-0x3c1f]
[    0.169845] pci 0000:00:1c.7: PCI bridge to [bus 01]
[    0.169858] pci 0000:00:1c.7:   bridge window [io  0x3000-0x3fff]
[    0.169862] pci 0000:00:1c.7:   bridge window [mem 0xfad00000-0xfbdfffff]
[    0.169867] pci 0000:00:1c.7:   bridge window [mem 0xbf000000-0xbfffffff 64bit pref]
[    0.169951] pci 0000:00:1e.0: PCI bridge to [bus 14] (subtractive decode)
[    0.169960] pci 0000:00:1e.0:   bridge window [mem 0xbc000000-0xfbffffff] (subtractive decode)
[    0.169961] pci 0000:00:1e.0:   bridge window [io  0x1000-0xffff] (subtractive decode)
[    0.169963] pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af] (subtractive decode)
[    0.169964] pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
[    0.169966] pci 0000:00:1e.0:   bridge window [io  0x0d00-0x0fff] (subtractive decode)
[    0.169967] pci 0000:00:1e.0:   bridge window [mem 0xfed00000-0xfed44fff] (subtractive decode)
[    0.169969] pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03bb] (subtractive decode)
[    0.169970] pci 0000:00:1e.0:   bridge window [io  0x03c0-0x03df] (subtractive decode)
[    0.169972] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.170000] pci_bus 0000:00: on NUMA node 0
[    0.170042] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    0.170079] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x00
[    0.170080] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.170201] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)
[    0.170240] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
[    0.170275] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 *11)
[    0.170309] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[    0.170344] ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
[    0.170379] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *4
[    0.170414] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled.
[    0.170449] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled.
[    0.170533] acpi root: \_SB_.PCI0 notify handler is installed
[    0.170550] Found 1 acpi root devices
[    0.170662] vgaarb: device added: PCI:0000:01:00.1,decodes=io+mem,owns=io+mem,locks=none
[    0.170664] vgaarb: loaded
[    0.170665] vgaarb: bridge control possible 0000:01:00.1
[    0.170770] SCSI subsystem initialized
[    0.170772] ACPI: bus type ATA registered
[    0.170850] libata version 3.00 loaded.
[    0.170927] pps_core: LinuxPPS API ver. 1 registered
[    0.170928] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.170945] PTP clock support registered
[    0.171016] PCI: Using ACPI for IRQ routing
[    0.172446] PCI: pci_cache_line_size set to 64 bytes
[    0.172505] e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff]
[    0.172506] e820: reserve RAM buffer [mem 0xadde4000-0xafffffff]
[    0.172508] e820: reserve RAM buffer [mem 0x247fff000-0x247ffffff]
[    0.172692] Switching to clocksource hpet
[    0.172763] AppArmor: AppArmor Filesystem Enabled
[    0.172796] pnp: PnP ACPI init
[    0.172800] ACPI: bus type PNP registered
[    0.172959] system 00:00: [io  0x0408-0x040f] has been reserved
[    0.172961] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.172963] system 00:00: [io  0x0310-0x0313] has been reserved
[    0.172964] system 00:00: [io  0x0316-0x0317] has been reserved
[    0.172966] system 00:00: [io  0x0700-0x071f] has been reserved
[    0.172967] system 00:00: [io  0x0880-0x08ff] has been reserved
[    0.172969] system 00:00: [io  0x0900-0x097f] could not be reserved
[    0.172971] system 00:00: [io  0x0cd4-0x0cd7] has been reserved
[    0.172973] system 00:00: [io  0x0cd0-0x0cd3] has been reserved
[    0.172975] system 00:00: [io  0x0f50-0x0f58] has been reserved
[    0.172977] system 00:00: [io  0x0ca0-0x0ca1] has been reserved
[    0.172979] system 00:00: [io  0x0ca4-0x0ca5] has been reserved
[    0.172981] system 00:00: [io  0x02f8-0x02ff] has been reserved
[    0.172983] system 00:00: [mem 0xb8000000-0xbbffffff] has been reserved
[    0.172985] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[    0.172987] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.173029] pnp 00:01: Plug and Play ACPI device, IDs IPI0001 (active)
[    0.173085] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.173092] pnp 00:03: [dma 7]
[    0.173131] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.173173] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.173217] pnp 00:05: Plug and Play ACPI device, IDs PNP0a06 (active)
[    0.173287] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.173338] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.173386] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[    0.173494] pnp: PnP ACPI: found 9 devices
[    0.173495] ACPI: bus type PNP unregistered
[    0.181708] pci 0000:00:1c.4: BAR 14: assigned [mem 0xbc000000-0xbc0fffff]
[    0.181711] pci 0000:00:01.0: PCI bridge to [bus 07]
[    0.181723] pci 0000:00:06.0: PCI bridge to [bus 02]
[    0.181726] pci 0000:00:06.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.181728] pci 0000:00:06.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[    0.181731] pci 0000:00:1c.0: PCI bridge to [bus 0d]
[    0.181743] pci 0000:03:00.0: BAR 6: assigned [mem 0xfab00000-0xfab1ffff pref]
[    0.181745] pci 0000:03:00.1: BAR 6: assigned [mem 0xfab20000-0xfab3ffff pref]
[    0.181746] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.181750] pci 0000:00:1c.4:   bridge window [mem 0xbc000000-0xbc0fffff]
[    0.181754] pci 0000:00:1c.4:   bridge window [mem 0xfab00000-0xfabfffff 64bit pref]
[    0.181759] pci 0000:00:1c.6: PCI bridge to [bus 04]
[    0.181763] pci 0000:00:1c.6:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.181772] pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref]
[    0.181774] pci 0000:00:1c.7: PCI bridge to [bus 01]
[    0.181776] pci 0000:00:1c.7:   bridge window [io  0x3000-0x3fff]
[    0.181780] pci 0000:00:1c.7:   bridge window [mem 0xfad00000-0xfbdfffff]
[    0.181784] pci 0000:00:1c.7:   bridge window [mem 0xbf000000-0xbfffffff 64bit pref]
[    0.181789] pci 0000:00:1e.0: PCI bridge to [bus 14]
[    0.182137] pci 0000:00:1e.0: setting latency timer to 64
[    0.182140] pci_bus 0000:00: resource 4 [mem 0xbc000000-0xfbffffff]
[    0.182142] pci_bus 0000:00: resource 5 [io  0x1000-0xffff]
[    0.182143] pci_bus 0000:00: resource 6 [io  0x0000-0x03af]
[    0.182145] pci_bus 0000:00: resource 7 [io  0x03e0-0x0cf7]
[    0.182146] pci_bus 0000:00: resource 8 [io  0x0d00-0x0fff]
[    0.182148] pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed44fff]
[    0.182149] pci_bus 0000:00: resource 10 [io  0x03b0-0x03bb]
[    0.182151] pci_bus 0000:00: resource 11 [io  0x03c0-0x03df]
[    0.182152] pci_bus 0000:00: resource 12 [mem 0x000a0000-0x000bffff]
[    0.182154] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.182156] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
[    0.182158] pci_bus 0000:03: resource 1 [mem 0xbc000000-0xbc0fffff]
[    0.182159] pci_bus 0000:03: resource 2 [mem 0xfab00000-0xfabfffff 64bit pref]
[    0.182161] pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff]
[    0.182163] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.182164] pci_bus 0000:01: resource 1 [mem 0xfad00000-0xfbdfffff]
[    0.182166] pci_bus 0000:01: resource 2 [mem 0xbf000000-0xbfffffff 64bit pref]
[    0.182167] pci_bus 0000:14: resource 4 [mem 0xbc000000-0xfbffffff]
[    0.182169] pci_bus 0000:14: resource 5 [io  0x1000-0xffff]
[    0.182170] pci_bus 0000:14: resource 6 [io  0x0000-0x03af]
[    0.182172] pci_bus 0000:14: resource 7 [io  0x03e0-0x0cf7]
[    0.182173] pci_bus 0000:14: resource 8 [io  0x0d00-0x0fff]
[    0.182175] pci_bus 0000:14: resource 9 [mem 0xfed00000-0xfed44fff]
[    0.182176] pci_bus 0000:14: resource 10 [io  0x03b0-0x03bb]
[    0.182177] pci_bus 0000:14: resource 11 [io  0x03c0-0x03df]
[    0.182179] pci_bus 0000:14: resource 12 [mem 0x000a0000-0x000bffff]
[    0.182211] NET: Registered protocol family 2
[    0.182370] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.182511] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.182644] TCP: Hash tables configured (established 65536 bind 65536)
[    0.182666] TCP: reno registered
[    0.182669] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.182691] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.182787] NET: Registered protocol family 1
[    0.182860] RPC: Registered named UNIX socket transport module.
[    0.182862] RPC: Registered udp transport module.
[    0.182863] RPC: Registered tcp transport module.
[    0.182863] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.204859] pci 0000:01:00.1: Boot video device
[    0.204935] PCI: CLS 64 bytes, default 64
[    0.204973] Trying to unpack rootfs image as initramfs...
[    1.997228] Freeing initrd memory: 8132k freed
[    2.016503] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.016509] software IO TLB [mem 0xa9de4000-0xadde4000] (64MB) mapped at [ffff8800a9de4000-ffff8800adde3fff]
[    2.027539] audit: initializing netlink socket (disabled)
[    2.027554] type=2000 audit(1506580083.025:1): initialized
[    2.036485] bounce pool size: 64 pages
[    2.038895] VFS: Disk quotas dquot_6.5.2
[    2.038919] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.039587] NFS: Registering the id_resolver key type
[    2.039596] Key type id_resolver registered
[    2.039597] Key type id_legacy registered
[    2.039606] msgmni has been set to 15657
[    2.039752] async_tx: api initialized (async)
[    2.039816] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    2.039818] io scheduler noop registered
[    2.039819] io scheduler deadline registered
[    2.039826] io scheduler cfq registered (default)
[    2.040439] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    2.040807] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[    2.716123] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.719476] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250
[    2.795188] brd: module loaded
[    2.800670] ACPI Warning: 0x0000000000000928-0x000000000000092F SystemIO conflicts with Region \SGPE 1 (20130328/utaddress-249)
[    2.800677] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.800680] Unknown LPC device 1c54
[    2.803635] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.807993] Loading iSCSI transport class v2.0-870.
[    2.832971] rdac: device handler registered
[    2.837598] ahci 0000:00:1f.2: version 3.0
[    2.837721] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    2.837747] ahci: SSS flag set, parallel bus scan disabled
[    2.848372] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
[    2.848377] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems apst
[    2.848381] ahci 0000:00:1f.2: setting latency timer to 64
[    2.878200] scsi0 : ahci
[    2.881368] scsi1 : ahci
[    2.885102] scsi2 : ahci
[    2.887928] scsi3 : ahci
[    2.889260] scsi4 : ahci
[    2.892737] scsi5 : ahci
[    2.895051] ata1: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0100 irq 42
[    2.895055] ata2: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0180 irq 42
[    2.895057] ata3: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0200 irq 42
[    2.895059] ata4: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0280 irq 42
[    2.895061] ata5: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0300 irq 42
[    2.895063] ata6: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0380 irq 42
[    2.905853] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[    2.909149] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.909156] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.910216] rtc_cmos 00:06: RTC can wake from S4
[    2.912477] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    2.912508] rtc_cmos 00:06: alarms up to one day, 114 bytes nvram, hpet irqs
[    2.915086] i2c /dev entries driver
[    2.920282] md: linear personality registered for level -1
[    2.920286] md: raid0 personality registered for level 0
[    2.920287] md: raid1 personality registered for level 1
[    2.920288] md: raid10 personality registered for level 10
[    2.922701] md: raid6 personality registered for level 6
[    2.922704] md: raid5 personality registered for level 5
[    2.922706] md: raid4 personality registered for level 4
[    2.922707] md: raidF1 personality registered for level 45
[    2.924131] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    2.924135] cpuidle: using governor ladder
[    2.924137] cpuidle: using governor menu
[    2.924216] TCP: cubic registered
[    2.924218] NET: Registered protocol family 17
[    2.924240] Key type dns_resolver registered
[    3.017256] tsc: Refined TSC clocksource calibration: 2294.788 MHz
[    3.017263] Switching to clocksource tsc
[    3.356080] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.356600] ata1.00: ATA-9: WDC WD40EFRX-68WT0N0, 82.00A82, max UDMA/133
[    3.356604] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    3.357163] ata1.00: configured for UDMA/133
[    3.357685] scsi 0:0:0:0: Direct-Access     WDC      WD40EFRX-68WT0N0         82.0 PQ: 0 ANSI: 5
[    3.358601] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[    3.358606] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.358646] sd 0:0:0:0: [sda] Write Protect is off
[    3.358649] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.358666] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.415657]  sda: sda1 sda2 sda5 sda6
[    3.418963] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.820847] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.821372] ata2.00: ATA-9: WDC WD40EFRX-68WT0N0, 82.00A82, max UDMA/133
[    3.821375] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    3.821932] ata2.00: configured for UDMA/133
[    3.822452] scsi 1:0:0:0: Direct-Access     WDC      WD40EFRX-68WT0N0         82.0 PQ: 0 ANSI: 5
[    3.823401] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[    3.823406] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    3.823446] sd 1:0:0:0: [sdb] Write Protect is off
[    3.823449] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.823467] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.872651]  sdb: sdb1 sdb2 sdb5 sdb6
[    3.875283] sd 1:0:0:0: [sdb] Attached SCSI disk
[    4.284604] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.285132] ata3.00: ATA-9: WDC WD40EFRX-68WT0N0, 82.00A82, max UDMA/133
[    4.285135] ata3.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    4.285711] ata3.00: configured for UDMA/133
[    4.286229] scsi 2:0:0:0: Direct-Access     WDC      WD40EFRX-68WT0N0         82.0 PQ: 0 ANSI: 5
[    4.287152] sd 2:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[    4.287157] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[    4.287196] sd 2:0:0:0: [sdc] Write Protect is off
[    4.287199] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    4.287217] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.334282]  sdc: sdc1 sdc2 sdc5 sdc6
[    4.337576] sd 2:0:0:0: [sdc] Attached SCSI disk
[    4.751370] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.751899] ata4.00: ATA-9: WDC WD40EFRX-68WT0N0, 82.00A82, max UDMA/133
[    4.751904] ata4.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    4.752461] ata4.00: configured for UDMA/133
[    4.752979] scsi 3:0:0:0: Direct-Access     WDC      WD40EFRX-68WT0N0         82.0 PQ: 0 ANSI: 5
[    4.753932] sd 3:0:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[    4.753936] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[    4.753975] sd 3:0:0:0: [sdd] Write Protect is off
[    4.753978] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    4.753995] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.795028]  sdd: sdd1 sdd2 sdd5 sdd6
[    4.797631] sd 3:0:0:0: [sdd] Attached SCSI disk
[    5.062206] ata5: SATA link down (SStatus 0 SControl 300)
[    5.367049] ata6: SATA link down (SStatus 0 SControl 300)
[    5.367089] registered taskstats version 1
[    5.367544] rtc_cmos 00:06: setting system clock to 2017-09-28 06:28:07 UTC (1506580087)
[    5.368165] Freeing unused kernel memory: 760k freed
[    5.368266] Write protecting the kernel read-only data: 8192k
[    5.368420] Freeing unused kernel memory: 1324k freed
[    5.369756] Freeing unused kernel memory: 500k freed
[    5.442034] ACPI: bus type USB registered
[    5.442780] usbcore: registered new interface driver usbfs
[    5.443612] usbcore: registered new interface driver hub
[    5.446207] usbcore: registered new interface driver ethub
[    5.448723] usbcore: registered new device driver usb
[    5.463945] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.470862] ehci-pci: EHCI PCI platform driver
[    5.471018] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    5.471030] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    5.471038] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    5.471053] ehci-pci 0000:00:1a.0: debug port 2
[    5.474949] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    5.474970] ehci-pci 0000:00:1a.0: irq 21, io mem 0xfacf0000
[    5.479985] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    5.480246] hub 1-0:1.0: USB hub found
[    5.480252] hub 1-0:1.0: 2 ports detected
[    5.480425] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    5.480433] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    5.480438] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    5.480453] ehci-pci 0000:00:1d.0: debug port 2
[    5.484345] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    5.484366] ehci-pci 0000:00:1d.0: irq 20, io mem 0xface0000
[    5.489993] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    5.493157] hub 2-0:1.0: USB hub found
[    5.493167] hub 2-0:1.0: 2 ports detected
[    5.508870] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.518947] uhci_hcd: USB Universal Host Controller Interface driver
[    5.519061] uhci_hcd 0000:01:00.4: UHCI Host Controller
[    5.519071] uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3
[    5.519091] uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
[    5.519134] uhci_hcd 0000:01:00.4: irq 16, io base 0x00003c00
[    5.519681] hub 3-0:1.0: USB hub found
[    5.519687] hub 3-0:1.0: 2 ports detected
[    5.535191] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    5.535202] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    5.735312] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
[    5.735318] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
[    5.735322] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
[    5.735595] xHCI xhci_add_endpoint called for root hub
[    5.735598] xHCI xhci_check_bandwidth called for root hub
[    5.735657] hub 4-0:1.0: USB hub found
[    5.735667] hub 4-0:1.0: 2 ports detected
[    5.735715] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    5.735719] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
[    5.736142] xHCI xhci_add_endpoint called for root hub
[    5.736144] xHCI xhci_check_bandwidth called for root hub
[    5.736658] hub 5-0:1.0: USB hub found
[    5.736667] hub 5-0:1.0: 2 ports detected
[    5.769104] usbcore: registered new interface driver usb-storage
[    5.790699] VMware PVSCSI driver - version 1.0.2.0-k
[    5.797673] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    5.805074] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    5.828558] Fusion MPT base driver 3.04.20
[    5.828562] Copyright (c) 1999-2008 LSI Corporation
[    5.839490] Fusion MPT SPI Host driver 3.04.20
[    5.841811] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    5.846474] Fusion MPT SAS Host driver 3.04.20
[    5.853538] Fusion MPT misc device (ioctl) driver 3.04.20
[    5.853623] mptctl: Registered with Fusion MPT base driver
[    5.853626] mptctl: /dev/mptctl @ (major,minor=10,220)
[    5.868613] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013
[    5.876626] mpt2sas version 20.00.00.00 loaded
[    5.886510] mpt3sas version 13.00.00.00 loaded
[    5.901762] broadwell_synobios: module license 'Synology Inc.' taints kernel.
[    5.901772] Disabling lock debugging due to kernel taint
[    5.902568] 2017-9-28 6:28:7 UTC
[    5.902572] synobios: load, major number 201
[    5.902576] Brand: Synology
[    5.902578] Model: DS-3617xs
[    5.902581] set group disks wakeup number to 4, spinup time deno 7
[    5.902585] synobios cpu_arch proc entry initialized
[    5.902587] synobios crypto_hw proc entry initialized
[    5.902589] synobios syno_platform proc entry initialized
[    5.912703] synobios: unload
[    5.997541] Got empty serial number. Generate serial number from product.
[    6.126662] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    6.261975] Got empty serial number. Generate serial number from product.
[    6.262308] hub 1-1:1.0: USB hub found
[    6.262358] hub 1-1:1.0: 6 ports detected
[    6.385530] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    6.520841] Got empty serial number. Generate serial number from product.
[    6.520850] drivers/usb/core/hub.c (2679) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0
[    6.521171] hub 2-1:1.0: USB hub found
[    6.521225] hub 2-1:1.0: 6 ports detected
[    6.605549] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[    6.701833] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[    6.702544] scsi6 : usb-storage 1-1.3:1.0
[    6.804446] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[    6.899644] Got empty serial number. Generate serial number from product.
[    6.899654] drivers/usb/core/hub.c (2679) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0
[    6.899656] drivers/usb/core/hub.c (2679) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa1
[    6.899976] hub 2-1.3:1.0: USB hub found
[    6.900029] hub 2-1.3:1.0: 2 ports detected
[    7.706357] scsi 6:0:0:0: Direct-Access     Innostor USB3.0                   1.00 PQ: 0 ANSI: 6
[    7.707871] sd 6:0:0:0: [synoboot] 30617600 512-byte logical blocks: (15.6 GB/14.5 GiB)
[    7.708232] sd 6:0:0:0: [synoboot] Write Protect is off
[    7.708236] sd 6:0:0:0: [synoboot] Mode Sense: 23 00 00 00
[    7.708608] sd 6:0:0:0: [synoboot] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[    7.720133]  synoboot: synoboot1 synoboot2 synoboot3
[    7.723790] sd 6:0:0:0: [synoboot] Attached SCSI removable disk
[   10.920604] md: Autodetecting RAID arrays.
[   10.968612] md: invalid raid superblock magic on sda5
[   10.968741] md: sda5 does not have a valid v0.90 superblock, not importing!
[   10.996457] md: invalid raid superblock magic on sda6
[   10.996582] md: sda6 does not have a valid v0.90 superblock, not importing!
[   11.039195] md: invalid raid superblock magic on sdb5
[   11.039320] md: sdb5 does not have a valid v0.90 superblock, not importing!
[   11.068272] md: invalid raid superblock magic on sdb6
[   11.068397] md: sdb6 does not have a valid v0.90 superblock, not importing!
[   11.107188] md: invalid raid superblock magic on sdc5
[   11.107313] md: sdc5 does not have a valid v0.90 superblock, not importing!
[   11.135521] md: invalid raid superblock magic on sdc6
[   11.135646] md: sdc6 does not have a valid v0.90 superblock, not importing!
[   11.180156] md: invalid raid superblock magic on sdd5
[   11.180281] md: sdd5 does not have a valid v0.90 superblock, not importing!
[   11.204507] md: invalid raid superblock magic on sdd6
[   11.204631] md: sdd6 does not have a valid v0.90 superblock, not importing!
[   11.204636] md: Scanned 16 and added 8 devices.
[   11.204637] md: autorun ...
[   11.204638] md: considering sda1 ...
[   11.204643] md:  adding sda1 ...
[   11.204645] md: sda2 has different UUID to sda1
[   11.204649] md:  adding sdb1 ...
[   11.204651] md: sdb2 has different UUID to sda1
[   11.204654] md:  adding sdc1 ...
[   11.204656] md: sdc2 has different UUID to sda1
[   11.204659] md:  adding sdd1 ...
[   11.204662] md: sdd2 has different UUID to sda1
[   11.204673] md: created md0
[   11.204675] md: bind<sdd1>
[   11.204690] md: bind<sdc1>
[   11.204698] md: bind<sdb1>
[   11.204705] md: bind<sda1>
[   11.204712] md: running: <sda1><sdb1><sdc1><sdd1>
[   11.204888] md/raid1:md0: active with 4 out of 8 mirrors
[   11.204908] md0: detected capacity change from 0 to 2549940224
[   11.204990] md: considering sda2 ...
[   11.204993] md:  adding sda2 ...
[   11.204996] md:  adding sdb2 ...
[   11.204999] md:  adding sdc2 ...
[   11.205002] md:  adding sdd2 ...
[   11.205818] md: created md1
[   11.205820] md: bind<sdd2>
[   11.205828] md: bind<sdc2>
[   11.205836] md: bind<sdb2>
[   11.205843] md: bind<sda2>
[   11.205849] md: running: <sda2><sdb2><sdc2><sdd2>
[   11.209200] md/raid1:md1: active with 4 out of 8 mirrors
[   11.209227] md1: detected capacity change from 0 to 2147418112
[   11.209738] md: ... autorun DONE.
[   11.295694]  md0: unknown partition table
[   12.620535] EXT4-fs (md0): barriers disabled
[   12.630057] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[   14.197556] usb 3-1: USB disconnect, device number 2
[   16.423380] usb 3-1: new full-speed USB device number 3 using uhci_hcd
[   16.578747] Got empty serial number. Generate serial number from product.
[   16.826276] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[   18.250953] EXT4-fs (md0): re-mounted. Opts: (null)
[   20.516591] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   20.516651] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   20.516707] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   20.516761] sd 3:0:0:0: Attached scsi generic sg3 type 0
[   20.516816] sd 6:0:0:0: Attached scsi generic sg4 type 0
[   20.768135]  md1: unknown partition table
[   20.904850] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k
[   21.330107] zram: module is from the staging directory, the quality is unknown, you have been warned.
[   21.330583] zram: Created 2 device(s) ...
[   21.353817] Adding 2405372k swap on /dev/zram0.  Priority:1 extents:1 across:2405372k SS
[   21.365173] Adding 2405372k swap on /dev/zram1.  Priority:1 extents:1 across:2405372k SS
[   22.334821] NET: Registered protocol family 10
[   22.368687] sit: IPv6 over IPv4 tunneling driver
[   22.787807] Monitor-Mwait will be used to enter C-1 state
[   22.787822] Monitor-Mwait will be used to enter C-2 state
[   22.787835] ACPI: acpi_idle registered with cpuidle
[   22.953685] init: syno-auth-check main process (5461) killed by TERM signal
[   23.298325] fuse init (API version 7.22)
[   23.303552] dca service started, version 1.12.1
[   23.308708] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI
[   23.308712] e1000e: Copyright(c) 1999 - 2016 Intel Corporation.
[   23.347650] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.3
[   23.347655] Copyright (c) 2007-2015 Intel Corporation.
[   23.359953] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.4.6
[   23.359957] Copyright(c) 1999 - 2016 Intel Corporation.
[   23.360018] ixgbe unsupported_sfp_notify proc entry initialized
[   23.385495] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 1.5.19
[   23.385499] i40e: Copyright(c) 2013 - 2016 Intel Corporation.
[   23.422882] tn40xx low_mem_msg proc entry initialized
[   23.422888] tn40xx low_mem_counter proc entry initialized
[   23.422890] tn40xx debug_msg proc entry initialized
[   23.422892] tn40xx: Tehuti Network Driver, 0.3.6.12.3
[   23.449904] Loading modules backported from Linux version v3.18.1-0-g39ca484
[   23.449909] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c
[   23.514508] Compat-mlnx-ofed backport release: cd30181
[   23.514513] Backport based on mlnx_ofed/mlnx_rdma.git cd30181
[   23.514514] compat.git: mlnx_ofed/mlnx_rdma.git
[   23.874409] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.00 ($DateTime: 2015/07/28 00:13:30 $)
[   23.969136] bio: create slab <bio-1> at 1
[   23.969265] Btrfs loaded
[   24.015019] jme: JMicron JMC2XX ethernet driver version 1.0.8
[   24.024838] sky2: driver version 1.30
[   24.034759] pch_gbe: EG20T PCH Gigabit Ethernet Driver - version 1.01
[   24.044579] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.2.42
[   24.054748] QLogic/NetXen Network Driver v4.0.80
[   24.059846] Solarflare NET driver v3.2
[   24.064977] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[   24.064981] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   24.069874] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[   24.074826] VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI
[   24.089834] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012)
[   24.113801] tg3.c:v3.132 (May 21, 2013)
[   24.123825] tg3 0000:03:00.0 eth0: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address 98:f2:b3:f7:17:04
[   24.123830] tg3 0000:03:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[   24.123832] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[   24.123835] tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[   24.138357] tg3 0000:03:00.1 eth1: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address 98:f2:b3:f7:17:05
[   24.138363] tg3 0000:03:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[   24.138366] tg3 0000:03:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[   24.138368] tg3 0000:03:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
[   24.148937] usbcore: registered new interface driver ax88179_178a
[   24.153815] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[   24.153822] ACPI: Power Button [PWRF]
[   24.212862] 2017-9-28 6:28:26 UTC
[   24.212868] synobios: load, major number 201
[   24.212871] Brand: Synology
[   24.212874] Model: DS-3617xs
[   24.212877] set group disks wakeup number to 4, spinup time deno 7
[   24.212880] synobios cpu_arch proc entry initialized
[   24.212882] synobios crypto_hw proc entry initialized
[   24.212884] synobios syno_platform proc entry initialized
[   24.390519] systemd-udevd[6362]: starting version 204
[   25.745827] tg3 0000:03:00.0: irq 46 for MSI/MSI-X
[   25.745835] tg3 0000:03:00.0: irq 47 for MSI/MSI-X
[   25.745840] tg3 0000:03:00.0: irq 48 for MSI/MSI-X
[   25.870994] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   28.154420] usb 3-1: USB disconnect, device number 3
[   28.154501] [sched_delayed] sched: RT throttling activated
[   28.279682] ip_tables: (C) 2000-2006 Netfilter Core Team
[   28.383391] usb 3-1: new full-speed USB device number 4 using uhci_hcd
[   28.405832] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   28.539768] Got empty serial number. Generate serial number from product.
[   28.547837] tg3 0000:03:00.1: irq 49 for MSI/MSI-X
[   28.547845] tg3 0000:03:00.1: irq 50 for MSI/MSI-X
[   28.547849] tg3 0000:03:00.1: irq 51 for MSI/MSI-X
[   28.672287] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   28.816437] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   30.887659] usbcore: registered new interface driver usblp
[   30.946122] usbcore: registered new interface driver usbhid
[   30.946125] usbhid: USB HID core driver
[   30.973252] input: BMC Virtual Keyboard  as /devices/pci0000:00/0000:00:1c.7/0000:01:00.4/usb3/3-1/3-1:1.0/input/input1
[   30.973264] hid-generic 0003:03F0:7029.0001: input: USB HID v1.01 Keyboard [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input0
[   30.973341] input: BMC Virtual Keyboard  as /devices/pci0000:00/0000:00:1c.7/0000:01:00.4/usb3/3-1/3-1:1.1/input/input2
[   30.973347] hid-generic 0003:03F0:7029.0002: input: USB HID v1.01 Mouse [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input1
[   31.116180] tg3 0000:03:00.0 eth0: Link is up at 1000 Mbps, full duplex
[   31.116185] tg3 0000:03:00.0 eth0: Flow control is off for TX and off for RX
[   31.116186] tg3 0000:03:00.0 eth0: EEE is disabled
[   31.116201] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   31.154958] init: synotifyd main process ended, respawning
[   31.239892] init: synotifyd main process ended, respawning
[   31.251825] init: synotifyd main process ended, respawning
[   31.263145] init: synotifyd main process ended, respawning
[   31.274658] init: synotifyd main process ended, respawning
[   31.286231] init: synotifyd respawning too fast, stopped
[   32.819437] ata1.00: configured for UDMA/133
[   32.819445] ata1: EH complete
[   32.936767] ata2.00: configured for UDMA/133
[   32.936775] ata2: EH complete
[   33.020596] ata3.00: configured for UDMA/133
[   33.020604] ata3: EH complete
[   33.086579] ata4.00: configured for UDMA/133
[   33.086587] ata4: EH complete
[   33.458882] init: findhostd main process (11574) terminated with status 127
[   33.458915] init: findhostd faild on spawn stage, stopped
[   33.459116] init: synocgid main process (11573) terminated with status 127
[   33.459135] init: synocgid faild on spawn stage, stopped
[   33.511603] init: snmpd main process (11517) terminated with status 127
[   33.511671] init: snmpd main process ended, respawning
[   33.544130] init: synosnmpcd main process (11735) killed by TERM signal
[   33.601136] init: snmpd main process (11827) terminated with status 127
[   33.601171] init: snmpd main process ended, respawning
[   33.615994] init: s2s_daemon main process (11705) terminated with status 127
[   33.616032] init: s2s_daemon faild on spawn stage, stopped
[   33.709966] init: synoscgi main process (11706) terminated with status 127
[   33.709999] init: synoscgi main process ended, respawning
[   33.730250] init: synosnmpcd main process (11952) killed by TERM signal
[   33.802583] init: synoscgi main process (12011) terminated with status 127
[   33.802620] init: synoscgi main process ended, respawning
[   33.807777] init: snmpd main process (11994) terminated with status 127
[   33.807816] init: snmpd main process ended, respawning
[   33.852865] init: synosnmpcd main process (12082) killed by TERM signal
[   33.873094] init: synoscgi main process (12071) terminated with status 127
[   33.873135] init: synoscgi main process ended, respawning
[   33.888332] init: snmpd main process (12094) terminated with status 127
[   33.888367] init: snmpd main process ended, respawning
[   33.926878] iSCSI:target_core_rodsp_server.c:1017:rodsp_server_init RODSP server started, login_key(98f2b3f71704).
[   33.942020] iSCSI:extent_pool.c:757:ep_init syno_extent_pool successfully initialized
[   33.957315] iSCSI:target_core_device.c:569:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
[   33.959188] iSCSI:target_core_lunbackup.c:358:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
[   33.969652] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   33.975550] init: synoscgi main process (12128) terminated with status 127
[   33.975587] init: synoscgi main process ended, respawning
[   33.975698] init: synosnmpcd main process (12157) killed by TERM signal
[   33.994747] iSCSI:target_core_file.c:89:fd_attach_hba RODSP plugin for fileio is enabled.
[   33.994757] iSCSI:target_core_ep.c:831:ep_attach_hba RODSP plugin for epio is enabled.
[   33.994759] iSCSI:target_core_ep.c:838:ep_attach_hba ODX Token Manager is enabled.
[   34.008843] init: snmpd main process (12211) terminated with status 127
[   34.008878] init: snmpd main process ended, respawning
[   34.011837] init: synoscgi main process (12222) terminated with status 127
[   34.011874] init: synoscgi main process ended, respawning
[   34.018124] init: synosnmpcd main process (12227) killed by TERM signal
[   34.037104] init: snmpd main process (12229) terminated with status 127
[   34.037137] init: snmpd respawning too fast, stopped
[   34.051693] init: synoscgi main process (12232) terminated with status 127
[   34.051740] init: synoscgi respawning too fast, stopped
[   34.060547] init: synosnmpcd main process (12246) killed by TERM signal
[   34.397766] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   34.397882] NFSD: starting 90-second grace period (net ffffffff81854640)
[   35.330002] loop: module loaded
[  215.372621] init: pkgctl-Docker pre-start process (15443) terminated with status 127
[  215.375941] init: pkgctl-NoteStation pre-start process (15444) terminated with status 127
[  215.383322] init: pkgctl-WebStation pre-start process (15445) terminated with status 127
[  215.389582] init: pkgctl-CloudStation pre-start process (15447) terminated with status 127
[  215.396754] init: pkgctl-PHP5.6 pre-start process (15448) terminated with status 127
[  215.407504] init: pkgctl-MariaDB pre-start process (15449) terminated with status 127
[  215.417643] init: pkgctl-PythonModule pre-start process (15450) terminated with status 127
[  215.417803] init: pkgctl-WebDAVServer pre-start process (15451) terminated with status 127
[  215.423087] init: pkgctl-Perl pre-start process (15452) terminated with status 127
[  215.423256] init: pkgctl-CloudSync pre-start process (15453) terminated with status 127
[  215.423422] init: pkgctl-DownloadStation pre-start process (15454) terminated with status 127
[  215.428086] init: pkgctl-SynoFinder pre-start process (15455) terminated with status 127
[  215.449925] init: pkgctl-FileStation pre-start process (15456) terminated with status 127
[  215.543807] init: pkgctl-LogCenter pre-start process (15457) terminated with status 127
[  215.564819] init: pkgctl-MariaDB10 pre-start process (15458) terminated with status 127
[  215.573622] init: pkgctl-Node.js_v4 pre-start process (15459) terminated with status 127
[  215.576318] init: pkgctl-TextEditor pre-start process (15460) terminated with status 127
[  215.608829] init: pkgctl-WebStation post-stop process (15480) terminated with status 127
[  215.611532] init: pkgctl-MariaDB post-stop process (15482) terminated with status 127
[  215.612995] init: pkg-WebStation-userdir main process (15490) terminated with status 1
[  215.643746] init: pkgctl-NoteStation post-stop process (15479) terminated with status 127
[  215.644016] init: pkgctl-WebDAVServer post-stop process (15484) terminated with status 127
[  215.658425] init: pkgctl-Perl post-stop process (15485) terminated with status 127
[  215.681342] init: pkgctl-CloudStation post-stop process (15481) terminated with status 127
[  215.692361] init: pkgctl-Docker post-stop process (15478) terminated with status 127
[  215.708151] init: pkgctl-PythonModule post-stop process (15483) terminated with status 127
[  215.720477] init: pkgctl-CloudSync post-stop process (15486) terminated with status 127
[  215.734209] init: pkgctl-SynoFinder post-stop process (15488) terminated with status 127
[  215.747605] init: pkgctl-DownloadStation post-stop process (15487) terminated with status 127
[  215.757994] init: pkgctl-Node.js_v4 post-stop process (15517) terminated with status 127
[  215.769078] init: pkgctl-LogCenter post-stop process (15515) terminated with status 127
[  215.777058] init: pkgctl-FileStation post-stop process (15489) terminated with status 127
[  215.784564] init: pkgctl-MariaDB10 post-stop process (15516) terminated with status 127
[  215.833137] init: pkgctl-TextEditor post-stop process (15518) terminated with status 127
[  215.833339] init: pkgctl-PHP5.6 post-stop process (15527) terminated with status 127
[  216.028225] init: esynoscheduler-bootup main process (15613) terminated with status 127
[  216.442960] ata1.00: configured for UDMA/133
[  216.442968] ata1: EH complete
[  216.443514] ata3.00: configured for UDMA/133
[  216.443519] ata3: EH complete
[  216.443527] ata4.00: configured for UDMA/133
[  216.443529] ata4: EH complete
[  216.446179] ata2.00: configured for UDMA/133
[  216.446185] ata2: EH complete
[ 1622.384775] usb 3-1: USB disconnect, device number 4
[ 7419.713181] perf interrupt took too long (2506 > 5000), lowering kernel.perf_event_max_sample_rate to 50000
root@DiskStation:~#

 

Hide  

any idea on how to fix this?

or maybe downgrade to "update 4"?

 

10x!

  • Like 1

Share this post


Link to post
Share on other sites
8 hours ago, kretzu77 said:

@cremenescu Try with the last Jun img 1.02b

 

yeah, that is the version I used, just misstyped.

I reinstalled the DSM with a DS3156xs as I had the DS3617xs installed and used the other network card on the microserver.

all is good now, running update 5.

It forced a migration this way.

Edited by cremenescu
update.

Share this post


Link to post
Share on other sites
On 9/28/2017 at 7:15 PM, cremenescu said:

I have a HP microserver Gen8 barebone with jun's loader 1.02 and just updated to "update 5" and I have only ssh acces to my DMS installation now.

at first it worked, but after a couple of hours nothing works.

when trying to acces the DMS i get this


I experienced the same issue on the 3rd day of upgrading from update 4 => 6.1.3-15152 update 5

I was changing some package settings (Media Station) followed by accessing the Shared Folder application when a pop-up prompted an error about encrypted key not matching/missing and no access rights. I tried to access my DSM via another browser tab and received the error page "Sorry, the page you are looking for is not found".

SSH was up and dmesg also shows similar output to user @cremenescu's log. 

md: Autodetecting RAID arrays.
md: invalid raid superblock magic on sda1
md: sda1 does not have a valid v0.90 superblock, not importing!
md: invalid raid superblock magic on sda2
md: sda2 does not have a valid v0.90 superblock, not importing!
(... etc, until sda6)


Recovery
Booted with a newly created DS3617xs (1.02b) boot loader, Synology Asistant shows status as "Recoverable". Attempting recovery (which completed with a reboot) did not help as the page still shows "Sorry, the page you are looking for is not found".

I was only to recover my volumes after seeing @cremenescu's method of using the a different DS3615xs boot loader. Doing so allowed Synology Assistant to see the NAS status as "Migratable". I proceeded to do so and DSM was functioning again. All my files and settings were intact. I manually updated to 6.1.3-15152 update 4 instead after the migration as a safety measure.

My System Details (before issue occurred)

  • Intel NM70 chipset (Baremetal)
  • Celeron 1037U @ 1.80GHz / 4GB ram
  • IOCrest 4-port Sata Controller using Mavell 88SE9215 chipset
  • Boot: jun's boot loader 1.02b / DS3617xs

 

I cannot ascertain that my issue is due to update 5, but I hope by sharing what I experienced will be of use to the community.
 

sorry_page_not_found.png

Edited by alvink
Added screenshot from web.

Share this post


Link to post
Share on other sites

I have issue like alvinkbut when I update 4.

My installation: HP Gen8 baremetall 1.02b 3617xs.

I suggest to go on update 3.

Now I'm reinstalling the Xpenology.

The data seems to be OK.

Share this post


Link to post
Share on other sites

Have a ReadyNAS Business Pro 6 and a Buffalo Terastation 5400DN both took Update 5 smoothly no issue.

Edited by casca

Share this post


Link to post
Share on other sites

Massive thanks to all those involved in this epic project :mrgreen:

Baremetal HP G8 mircoserver updated to 6.1.3-15152 update5, jun 1.02b, 3615xs

I should of upgraded long ago, but 5.2 just kept ticking along ....

Jun's loader is the bomb. Thanks again

 

Share this post


Link to post
Share on other sites

DSM 6.1.3-15152 Update 6 is just released, updated a test VM running  DSM 6.1.3-15152 Update 5 with JUN 1.0.2b DS3617xs on ESX 6.5U1 using control panel upgrade and the test vm runs without a hitch.

I will keep it running for a few day's and report back if there is any trouble.

 

https://www.synology.com/en-global/releaseNote/DS3617xs

Version: 6.1.3-15152-6


(2017-10-03)

Important Note

  1. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.
  2. This update will restart your Synology NAS.

Fixed Issues

  1. Fixed multiple security vulnerabilities regarding DNSmasq (CVE-2017-13704, CVE-2017-14491, CVE-2017-14495, CVE-2017-14496).
  2. Fixed multiple security vulnerabilities regarding DHCPv6 Server (CVE-2017-14492, CVE-2017-14493, CVE-2017-14494).
  • Like 1

Share this post


Link to post
Share on other sites

Running esxi 6.5 with jun 1.0.2b DS3617xs on ESXI. I updated within dsm control panel aswell. No problem so far....

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.