Jump to content
XPEnology Community

Drivers requests for DSM 6.1


Recommended Posts

On 7/9/2018 at 8:34 PM, IG-88 said:

your controller is not in my list as supported

your live ubuntu presumably using a newer kernel/driver

must be a newer type/chip that was not supported by kerne 3.10.102?

they seem to offer recent driver source so i can try to compile it

https://storage.microsemi.com/en-us/support/raid/sas_raid/sas-71605e/

https://storage.microsemi.com/en-us/support/raid/sas_raid/asr-81605z/

it something useful comes up from this i will write about in in the additional compiled modules section

 

Please add Adaptech 71605 driver. Im useing asrock h110m itx and intel g4400 but not working raid controller

Link to comment
Share on other sites

13 hours ago, afaroz61 said:

请添加Adaptech 71605驱动程序。我正在使用华擎H110M ITX和Intel G4400,但无法使用RAID控制器

raid50andraid10.thumb.png.934a2d4411bf07ff0ecc627d5be6f56d.png

My hardware is asrock h310m+G5500T+8G is run physical machine.

user Jun 1.03b+0.5test loader at DSM6.2.2U4 in the DS3617  

Link to comment
Share on other sites

  • 4 weeks later...
  • 3 weeks later...
  • 2 weeks later...

hello.

could you please add drivers for :

 

Sun Quad-Port PCIe Gigabit Network Adapter ATLS1QGE

 

for using on HP 8200 SFF

DS3615xs Jun 1.02b Genesys (MBR) DSM 6.1.7-15284

 

 

here result from on ubuntu desktop 18.04

poce@poce-ubuntu:~$ lspci
01:00.0 Ethernet controller: Oracle/SUN Multithreaded 10-Gigabit Ethernet Network Controller (rev 01)
01:00.1 Ethernet controller: Oracle/SUN Multithreaded 10-Gigabit Ethernet Network Controller (rev 01)
01:00.2 Ethernet controller: Oracle/SUN Multithreaded 10-Gigabit Ethernet Network Controller (rev 01)
01:00.3 Ethernet controller: Oracle/SUN Multithreaded 10-Gigabit Ethernet Network Controller (rev 01)

 

poce@poce-ubuntu:~$ sudo lshw -C network
  *-network:0
       description: Ethernet interface
       product: Multithreaded 10-Gigabit Ethernet Network Controller
       vendor: Oracle/SUN
       physical id: 0
       bus info: pci@0000:01:00.0
       logical name: enp1s0f0
       version: 01
       serial: 00:21:28:xx.xx.xx
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=niu driverversion=1.1 firmware=3.20 latency=0 link=no multicast=yes port=twisted pair
       resources: irq:16 memory:f6000000-f6ffffff memory:f7438000-f743ffff memory:f7430000-f7437fff memory:f7300000-f73fffff

 

thanks, poce

 

 

 

 

Link to comment
Share on other sites

  • 1 month later...
  • 2 weeks later...

Hi,

 

Hope all are well. 

 

I was trying to install this on an old hardware.

HP DL360 G5 1 U server.

 

Find my Synology was able to detect the hardware through NIC but couldn't detect the hard disk.

Server uses HP smart array p400i controller, which i can't find in the default and extra drivers.

 

Can you please help me with this.

https://www.cnet.com/products/hp-proliant-dl360-g5-xeon-e5420-2-5-ghz-monitor-none-series/

 

1.png2.png

 

Thanks in advance.

Link to comment
Share on other sites

  • 1 month later...
  • 1 month later...
  • 1 month later...

Goodnight. I don't know much English and I use a translator. I have a motherboard. asus p5n-e sli. It incorporates the NVIDIA nForce® 650i SLITM chipses. And I would need you to add the storage sata driver. Since it does not detect any hard drive or adding the latest version extra.lzma. And the bios if the discs detect it. A greeting. And thanks.

Link to comment
Share on other sites

8 minutes ago, zifu said:

NVIDIA nForce® 650i SLITM chipses. And I would need you to add the storage sata driver.

 

if anyone is trying to do that it might be more then just compiling a driver

 

https://xpenology.com/forum/topic/9508-driver-extension-jun-102bdsm61x-for-3615xs-3617xs-916/

!!!all sata_* and pata_* drivers are still not working because of the kernel source changes Synology did (same as in kernel 3.10.102 used and modded by Synology), as long as no one writes a patch for this I can use to fix this, it will stay this way !!! 
...
AMD
[pata_amd: AMD 751, AMD 756, AMD 766, AMD 768, AMD 8111, AMD CS5536, nVidia nForce, nVidia nForce 2 and 3, nVidia CK804 and MCP04, nVidia MCP51, nVidia MCP55, nVidia MCP61, nVidia MCP65, nVidia MCP67, nVidia MCP73, nVidia MCP77] -> does not load: Unknown symbol syno_libata_index_get (err 0)

 

Link to comment
Share on other sites

  • 3 weeks later...
On 1/19/2018 at 2:42 AM, IG-88 said:

it is there, can get a little confusing with "/" as separator for main type (i218 and 219) and sub type v and lm

"e1000e: Intel PCIe PRO/1000 82563/82566/82567/82571/82572/82573/82574/82577/82578/82583/Gigabit CT Desktop Adapter/PRO/1000 PT/PF/I217-LM/V/I218-V/LM/I219 LM/V"

 

so try it i'm pretty confident it will work

i have, asrock h370 performance p4.20 with Intel I219V Gigabit LAN i can seems to detect the lan i already edit the grub with the usb vid, pd and mac of nic, any ideas how i can install? 

Link to comment
Share on other sites

i'm not doing any new drivers for dsm 6.1

e1000e version in there is 3.3.4

newer i219 versions not supported by this old driver are

    15f4  Ethernet Connection (15) I219-LM
    15f5  Ethernet Connection (15) I219-V
    15f9  Ethernet Connection (14) I219-LM
    15fa  Ethernet Connection (14) I219-V
    15fb  Ethernet Connection (13) I219-LM
    15fc  Ethernet Connection (13) I219-V
    1a1c  Ethernet Connection (17) I219-LM
    1a1d  Ethernet Connection (17) I219-V
    1a1e  Ethernet Connection (16) I219-LM
    1a1f  Ethernet Connection (16) I219-V

 

Link to comment
Share on other sites

  • 3 weeks later...
12 hours ago, jeff93tsz said:

Salut, tout d'abord merci pour le travail. 
Pourriez-vous compiler des pilotes pour adaptec 6405e ainsi que pour adaptec 6805T pour dsm 6.2.3-25426 syno-i686?
Merci d'avance pour vos commentaires

as the international section is supposed to be english you might rephrase to english

Link to comment
Share on other sites

  • 1 month later...
  • 9 months later...
On 11/23/2020 at 6:02 PM, IG-88 said:

i'm not doing any new drivers for dsm 6.1

e1000e version in there is 3.3.4

newer i219 versions not supported by this old driver are


    15f4  Ethernet Connection (15) I219-LM
    15f5  Ethernet Connection (15) I219-V
    15f9  Ethernet Connection (14) I219-LM
    15fa  Ethernet Connection (14) I219-V
    15fb  Ethernet Connection (13) I219-LM
    15fc  Ethernet Connection (13) I219-V
    1a1c  Ethernet Connection (17) I219-LM
    1a1d  Ethernet Connection (17) I219-V
    1a1e  Ethernet Connection (16) I219-LM
    1a1f  Ethernet Connection (16) I219-V

 

hi, may I know whether is there any driver for the NIC card - i219 version 15fa? I have an Asrock B560M motherboard and unable to detect the NIC card when trying to install..

 

Appreciate the help and thank you..

Link to comment
Share on other sites

  • 1 month later...

Thank you very much for all your work 

I have a Lenovo M93p (Tiny PC)

here are the Ethernet details

From this page click here

Ethernet controller : Intel L217LM Clarkville

99% sure this is the driver(s) link

 https://pcsupport.lenovo.com/ie/en/products/desktops-and-all-in-ones/thinkcentre-m-series-desktops/thinkcentre-m93p/downloads/ds542693-intel-lan-driver-for-windows-10-desktop-workstation

 

very much appreciated - thank you

Link to comment
Share on other sites

  • 4 weeks later...

Drivers for rtl8188eu wifi adapter

 

How to Install:

install -p -m 644 /volume1/soft/8188eu.ko /lib/modules

insmod /lib/modules/8188eu.ko

Find your adapter

lsusb

|__usb1          1d6b:0002:0310 09  2.00  480MBit/s 0mA 1IF  (ehci_hcd 0000:00:1d.7) hub
  |__1-4         058f:6387:0100 00  2.00  480MBit/s 200mA 1IF  (Generic Mass Storage A20677DA)
  |__1-8         2357:010c:0000 00  2.00  480MBit/s 500mA 1IF  (Realtek 802.11n NIC 00E04C0001)
|__usb2          1d6b:0001:0310 09  1.10   12MBit/s 0mA 1IF  (uhci_hcd 0000:00:1d.0) hub
|__usb3          1d6b:0001:0310 09  1.10   12MBit/s 0mA 1IF  (uhci_hcd 0000:00:1d.1) hub
|__usb4          1d6b:0001:0310 09  1.10   12MBit/s 0mA 1IF  (uhci_hcd 0000:00:1d.2) hub
|__usb5          1d6b:0001:0310 09  1.10   12MBit/s 0mA 1IF  (uhci_hcd 0000:00:1d.3) hub

 

echo "(0x2357:0x010c,rtl8188eu)" >> /lib/udev/devicetable/usb.wifi.table

reboot

 

8188eu.ko

Edited by sharky221
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...