IG-88

Driver extension for jun 1.02b/3615xs/DSM6.1.3

Recommended Posts

there is a new test version 3.2 with folowing changes

-extenel source - Realtek RTL8152/RTL8153 Based USB Ethernet Adapters	r8152.ko
(0008-r8152.53-2.09.0.tar.bz2)
-> already tested and ok

-external source Broadcom Tigon3										tg3.ko
(tg3_linux-3.137k.tar.gz)
-> ???

-external source - HP Smart Array SAS									hpsa.ko
(hpsa-3.4.20-100.tar.bz2)
-> ???

http://s000.tinyupload.com/?file_id=91168375327128238944

 

Share this post


Link to post
Share on other sites
14 hours ago, IG-88 said:

there is a new test version 3.2 with folowing changes


-extenel source - Realtek RTL8152/RTL8153 Based USB Ethernet Adapters	r8152.ko
(0008-r8152.53-2.09.0.tar.bz2)
-> already tested and ok

-external source Broadcom Tigon3										tg3.ko
(tg3_linux-3.137k.tar.gz)
-> ???

-external source - HP Smart Array SAS									hpsa.ko
(hpsa-3.4.20-100.tar.bz2)
-> ???

http://s000.tinyupload.com/?file_id=91168375327128238944

 

Thanks for the news version of the extra but the HPSA make a opps :

 

:: Loading module hpsa[    3.320219] BUG: unable to handle kernel NULL pointer d                                                                                        ereference at           (null)
[    3.358228] IP: [<ffffffffa0223f6d>] hpsa_slave_alloc+0x3d/0x1f0 [hpsa]
[    3.389973] PGD 1422d6067 PUD 141f1d067 PMD 0
[    3.411463] Oops: 0000 [#1] SMP
[    3.426932] Modules linked in: hpsa(O+) 3w_sas 3w_9xxx aic94xx aacraid sx8 mp                                                                                        t3sas mpt2sas(O) megaraid_sas ata_piix mptctl mptsas mptspi mptscsih mptbase scs                                                                                        i_transport_spi megaraid megaraid_mbox megaraid_mm vmw_pvscsi BusLogic usb_stora                                                                                        ge etxhci_hcd xhci_hcd uhci_hcd ohci_hcd ehci_pci ehci_hcd usbcore usb_common el                                                                                        000(O)
[    3.564153] CPU: 0 PID: 3732 Comm: insmod Tainted: G           O 3.10.102 #15                                                                                        047
[    3.599530] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 11/02/2015
[    3.633709] task: ffff8801422caa70 ti: ffff880141f6c000 task.ti: ffff880141f6                                                                                        c000
[    3.671396] RIP: 0010:[<ffffffffa0223f6d>]  [<ffffffffa0223f6d>] hpsa_slave_a                                                                                        lloc+0x3d/0x1f0 [hpsa]
[    3.719434] RSP: 0018:ffff880141f6f720  EFLAGS: 00010046
[    3.745227] RAX: 0000000000000282 RBX: ffff880141f78000 RCX: 000000000000000b
[    3.779835] RDX: 0000000000000000 RSI: 0000000000000202 RDI: ffff880141f78240
[    3.814268] RBP: ffff880141f78240 R08: 0000000000000000 R09: 000000000000fffb
[    3.848848] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88013f897800
[    3.883527] R13: 0000000000000000 R14: ffff88013f66e028 R15: 0000000000000000
[    3.918125] FS:  00007f7a01c3d700(0000) GS:ffff880147a00000(0000) knlGS:00000                                                                                        00000000000
[    3.957147] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.984541] CR2: 0000000000000000 CR3: 000000013e76d000 CR4: 00000000001407f0
[    4.018944] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    4.052920] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[    4.087597] Stack:
[    4.097163]  ffff88013f897800 ffff88013c10e000 ffff88013f897800 ffff88013f66e                                                                                        000
[    4.133062]  ffffffff8130faf2 0000000000000000 0000000000000000 ffff88013f66e                                                                                        000
[    4.168660]  0000000000000000 0000000000000000 ffffffff8131003d ffff88013f66e                                                                                        038
[    4.204166] Call Trace:
[    4.215854]  [<ffffffff8130faf2>] ? scsi_alloc_sdev+0x232/0x2c0
[    4.244420]  [<ffffffff8131003d>] ? scsi_probe_and_add_lun+0x4bd/0xf70
[    4.275996]  [<ffffffff8126612d>] ? kobject_set_name_vargs+0x4d/0x70
[    4.306901]  [<ffffffff812f05d2>] ? dev_set_name+0x42/0x50
[    4.333344]  [<ffffffffa00e9ee0>] ? spi_target_match+0x40/0x94 [scsi_transpor                                                                                        t_spi]
[    4.369953]  [<ffffffff812f7d4f>] ? attribute_container_add_device+0x4f/0x130
[    4.404189]  [<ffffffff812f061e>] ? get_device+0xe/0x20
[    4.429149]  [<ffffffff8130f826>] ? scsi_alloc_target+0x276/0x310
[    4.458618]  [<ffffffff81310e1d>] ? __scsi_scan_target+0x8d/0x5c0
[    4.487944]  [<ffffffff812f22af>] ? device_create+0x2f/0x40
[    4.515371]  [<ffffffff81311423>] ? scsi_scan_target+0xd3/0xe0
[    4.543625]  [<ffffffff8131d62f>] ? sas_rphy_add+0x10f/0x170
[    4.571219]  [<ffffffffa022aaa8>] ? adjust_hpsa_scsi_table+0x14d8/0x1d80 [hps                                                                                        a]
[    4.606077]  [<ffffffffa022fa5e>] ? hpsa_scan_start+0x13fe/0x1f30 [hpsa]
[    4.638208]  [<ffffffff812f7ff0>] ? transport_setup_classdev+0x20/0x20
[    4.670020]  [<ffffffff812f7bb6>] ? attribute_container_device_trigger+0x66/0                                                                                        xb0
[    4.705728]  [<ffffffff813116bd>] ? do_scsi_scan_host+0x2d/0x80
[    4.734367]  [<ffffffffa022e2ef>] ? hpsa_init_one+0x1d1f/0x2090 [hpsa]
[    4.765549]  [<ffffffff81289a90>] ? pci_device_probe+0x60/0xa0
[    4.794104]  [<ffffffff812f46aa>] ? really_probe+0x5a/0x220
[    4.820975]  [<ffffffff812f4931>] ? __driver_attach+0x81/0x90
[    4.849320]  [<ffffffff812f48b0>] ? __device_attach+0x40/0x40
[    4.877213]  [<ffffffff812f29a3>] ? bus_for_each_dev+0x53/0x90
[    4.905465]  [<ffffffff812f3e48>] ? bus_add_driver+0x158/0x250
[    4.933999]  [<ffffffffa023a000>] ? 0xffffffffa0239fff
[    4.958813]  [<ffffffff812f4f38>] ? driver_register+0x68/0x150
[    4.986892]  [<ffffffffa023a000>] ? 0xffffffffa0239fff
[    5.011285]  [<ffffffffa023a038>] ? hpsa_init+0x38/0x58 [hpsa]
[    5.039143]  [<ffffffff810003aa>] ? do_one_initcall+0xea/0x140
[    5.067531]  [<ffffffff81085d8f>] ? load_module+0x1d0f/0x2060
[    5.095251]  [<ffffffff81082c40>] ? store_uevent+0x40/0x40
[    5.121729]  [<ffffffff81086171>] ? SYSC_init_module+0x91/0xc0
[    5.149695]  [<ffffffff814ab7f2>] ? system_call_fastpath+0x16/0x1b
[    5.179073] Code: 05 00 00 48 8d ab 40 02 00 00 48 89 ef e8 3c 6e 28 e1 45 8b                                                                                         84 24 88 00 00 00 45 85 c0 0f 85 cb 00 00 00 49 8b 94 24 68 01 00 00 <48> 8b 32                                                                                         8b 93 44 02 00 00 85 d2 7e 38 83 ea 01 48 8d 8b 48 02
[    5.272545] RIP  [<ffffffffa0223f6d>] hpsa_slave_alloc+0x3d/0x1f0 [hpsa]
[    5.305240]  RSP <ffff880141f6f720>
[    5.322382] CR2: 0000000000000000
[    5.338434] ---[ end trace 0cff598f082b2577 ]---

 

Edited by Polanskiman
added proper code tags

Share this post


Link to post
Share on other sites
13 hours ago, cseb said:

Thanks for the news version of the extra but the HPSA make a opps :

 

In the future, please use proper code tags.

Share this post


Link to post
Share on other sites

cseb did test 3 versions of the driver from the extrenal source and all crashed when loaded on a sysem with a HP 410 controller
so no hpsa driver for now as the original from the kernel 3.10.102 does not detect disks and the one from "sourceforge.net/projects/cciss/" did not work with the synology modifyed kernel

 

anyone there to test the tigon3 driver?

 

Share this post


Link to post
Share on other sites
10 hours ago, IG-88 said:

cseb did test 3 versions of the driver from the extrenal source and all crashed when loaded on a sysem with a HP 410 controller
so no hpsa driver for now as the original from the kernel 3.10.102 does not detect disks and the one from "sourceforge.net/projects/cciss/" did not work with the synology modifyed kernel

 

anyone there to test the tigon3 driver?

 

Tonight I'll try with the tigon3!

Share this post


Link to post
Share on other sites
On 17/9/2017 at 9:22 PM, IG-88 said:

cseb did test 3 versions of the driver from the extrenal source and all crashed when loaded on a sysem with a HP 410 controller
so no hpsa driver for now as the original from the kernel 3.10.102 does not detect disks and the one from "sourceforge.net/projects/cciss/" did not work with the synology modifyed kernel

 

anyone there to test the tigon3 driver?

 

An absolute success! @IG-88

6.1.3 works perfectly again!

Share this post


Link to post
Share on other sites

Iv'e tried version 3.2 with the MBR_Genesys boot loader on my R710, and it works :smile: !!!!

Even updated to 6.1.3 update 4.

 

Thank you so much!

 

For those interested in the full dmesg output:

dmesg output  

[    0.000000] Initializing cgroup subsys cpuset

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Initializing cgroup subsys cpuacct

[    0.000000] Linux version 3.10.102 (root@build1) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #15152 SMP Fri Sep 1 11:15:28 CST 2017

[    0.000000] Command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=C7LWN09761 mac1=0024E84B993C mac2=0024E84B993E mac3=0024E84B9940 mac4=0024E84B9942 netif_num=4 vid=0x058f pid=0x6387

[    0.000000] KERNEL supported cpus:

[    0.000000]   Intel GenuineIntel

[    0.000000] e820: BIOS-provided physical RAM map:

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable

[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf378fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000bf379000-0x00000000bf38efff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000bf38f000-0x00000000bf3cdfff] ACPI data

[    0.000000] BIOS-e820: [mem 0x00000000bf3ce000-0x00000000bfffffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000183fffffff] usable

[    0.000000] NX (Execute Disable) protection: active

[    0.000000] SMBIOS 2.6 present.

[    0.000000] DMI: Dell Inc. PowerEdge R710/0HYPX2, BIOS 6.4.0 07/23/2013

[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[    0.000000] e820: last_pfn = 0x1840000 max_arch_pfn = 0x400000000

[    0.000000] MTRR default type: uncachable

[    0.000000] MTRR fixed ranges enabled:

[    0.000000]   00000-9FFFF write-back

[    0.000000]   A0000-BFFFF uncachable

[    0.000000]   C0000-CFFFF write-protect

[    0.000000]   D0000-EBFFF uncachable

[    0.000000]   EC000-FFFFF write-protect

[    0.000000] MTRR variable ranges enabled:

[    0.000000]   0 base 0000000000 mask FF80000000 write-back

[    0.000000]   1 base 0080000000 mask FFC0000000 write-back

[    0.000000]   2 base 0100000000 mask FF00000000 write-back

[    0.000000]   3 base 0200000000 mask FE00000000 write-back

[    0.000000]   4 base 0400000000 mask FC00000000 write-back

[    0.000000]   5 base 0800000000 mask F800000000 write-back

[    0.000000]   6 base 1000000000 mask F800000000 write-back

[    0.000000]   7 base 1800000000 mask FFC0000000 write-back

[    0.000000]   8 disabled

[    0.000000]   9 disabled

[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved

[    0.000000] e820: last_pfn = 0xbf379 max_arch_pfn = 0x400000000

[    0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]

[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576

[    0.000000] Using GB pages for direct mapping

[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]

[    0.000000]  [mem 0x00000000-0x000fffff] page 4k

[    0.000000] BRK [0x01ab6000, 0x01ab6fff] PGTABLE

[    0.000000] BRK [0x01ab7000, 0x01ab7fff] PGTABLE

[    0.000000] BRK [0x01ab8000, 0x01ab8fff] PGTABLE

[    0.000000] init_memory_mapping: [mem 0x183fe00000-0x183fffffff]

[    0.000000]  [mem 0x183fe00000-0x183fffffff] page 1G

[    0.000000] init_memory_mapping: [mem 0x183c000000-0x183fdfffff]

[    0.000000]  [mem 0x183c000000-0x183fdfffff] page 1G

[    0.000000] init_memory_mapping: [mem 0x1800000000-0x183bffffff]

[    0.000000]  [mem 0x1800000000-0x183bffffff] page 1G

[    0.000000] init_memory_mapping: [mem 0x1000000000-0x17ffffffff]

[    0.000000]  [mem 0x1000000000-0x17ffffffff] page 1G

[    0.000000] init_memory_mapping: [mem 0x00100000-0xbf378fff]

[    0.000000]  [mem 0x00100000-0x001fffff] page 4k

[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M

[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G

[    0.000000]  [mem 0x80000000-0xbf1fffff] page 2M

[    0.000000]  [mem 0xbf200000-0xbf378fff] page 4k

[    0.000000] init_memory_mapping: [mem 0x100000000-0xfffffffff]

[    0.000000]  [mem 0x100000000-0xfffffffff] page 1G

[    0.000000] RAMDISK: [mem 0x36e92000-0x37740fff]

[    0.000000] ACPI: RSDP 0x00000000000F1150 00024 (v02 DELL  )

[    0.000000] ACPI Warning: BIOS XSDT has NULL entry, using RSDT (20130328/tbutils-678)

[    0.000000] ACPI: RSDT 0x00000000000F1174 00060 (v01 DELL   PE_SC3   00000001 DELL 00000001)

[    0.000000] ACPI: FACP 0x00000000BF3B3400 00074 (v01 DELL   PE_SC3   00000001 DELL 00000001)

[    0.000000] ACPI: DSDT 0x00000000BF38F000 03DD0 (v01 DELL   PE_SC3   00000001 INTL 20050624)

[    0.000000] ACPI: FACS 0x00000000BF3B6000 00040

[    0.000000] ACPI: APIC 0x00000000BF3B3478 0015E (v01 DELL   PE_SC3   00000001 DELL 00000001)

[    0.000000] ACPI: SPCR 0x00000000BF3B35D8 00050 (v01 DELL   PE_SC3   00000001 DELL 00000001)

[    0.000000] ACPI: HPET 0x00000000BF3B362C 00038 (v01 DELL   PE_SC3   00000001 DELL 00000001)

[    0.000000] ACPI: DMAR 0x00000000BF3B3668 001B0 (v01 DELL   PE_SC3   00000001 DELL 00000001)

[    0.000000] ACPI: MCFG 0x00000000BF3B38C4 0003C (v01 DELL   PE_SC3   00000001 DELL 00000001)

[    0.000000] ACPI: WD__ 0x00000000BF3B3904 00134 (v01 DELL   PE_SC3   00000001 DELL 00000001)

[    0.000000] ACPI: SLIC 0x00000000BF3B3A3C 00024 (v01 DELL   PE_SC3   00000001 DELL 00000001)

[    0.000000] ACPI: ERST 0x00000000BF392F70 00270 (v01 DELL   PE_SC3   00000001 DELL 00000001)

[    0.000000] ACPI: HEST 0x00000000BF3931E0 003A8 (v01 DELL   PE_SC3   00000001 DELL 00000001)

[    0.000000] ACPI: BERT 0x00000000BF392DD0 00030 (v01 DELL   PE_SC3   00000001 DELL 00000001)

[    0.000000] ACPI: EINJ 0x00000000BF392E00 00170 (v01 DELL   PE_SC3   00000001 DELL 00000001)

[    0.000000] ACPI Error: Null physical address for ACPI table [(null)] (20130328/tbutils-464)

[    0.000000] ACPI: TCPA 0x00000000BF3B3BC0 00064 (v02 DELL   PE_SC3   00000001 DELL 00000001)

[    0.000000] ACPI: SSDT 0x00000000BF3B7000 062C4 (v01 INTEL  PPM RCM  80000001 INTL 20061109)

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000]  [ffffea0000000000-ffffea0054dfffff] PMD -> [ffff8817df600000-ffff8818335fffff] on node 0

[    0.000000] Zone ranges:

[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]

[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]

[    0.000000]   Normal   [mem 0x100000000-0x183fffffff]

[    0.000000] Movable zone start for each node

[    0.000000] Early memory node ranges

[    0.000000]   node   0: [mem 0x00001000-0x0009efff]

[    0.000000]   node   0: [mem 0x00100000-0xbf378fff]

[    0.000000]   node   0: [mem 0x100000000-0x183fffffff]

[    0.000000] On node 0 totalpages: 25162519

[    0.000000]   DMA zone: 56 pages used for memmap

[    0.000000]   DMA zone: 21 pages reserved

[    0.000000]   DMA zone: 3998 pages, LIFO batch:0

[    0.000000]   DMA32 zone: 10653 pages used for memmap

[    0.000000]   DMA32 zone: 779129 pages, LIFO batch:31

[    0.000000]   Normal zone: 333312 pages used for memmap

[    0.000000]   Normal zone: 24379392 pages, LIFO batch:31

[    0.000000] ACPI: PM-Timer IO Port: 0x808

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x24] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x30] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x32] enabled)

[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor 8/0x32 ignored.

[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled)

[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor 9/0x12 ignored.

[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x34] enabled)

[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor 10/0x34 ignored.

[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] enabled)

[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor 11/0x14 ignored.

[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x21] enabled)

[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor 12/0x21 ignored.

[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x01] enabled)

[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor 13/0x1 ignored.

[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x23] enabled)

[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor 14/0x23 ignored.

[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x03] enabled)

[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor 15/0x3 ignored.

[    0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x25] enabled)

[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor 16/0x25 ignored.

[    0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x05] enabled)

[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor 17/0x5 ignored.

[    0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x31] enabled)

[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor 18/0x31 ignored.

[    0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x11] enabled)

[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor 19/0x11 ignored.

[    0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x33] enabled)

[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor 20/0x33 ignored.

[    0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x13] enabled)

[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor 21/0x13 ignored.

[    0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x35] enabled)

[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor 22/0x35 ignored.

[    0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x15] enabled)

[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor 23/0x15 ignored.

[    0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled)

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])

[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])

[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23

[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])

[    0.000000] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[    0.000000] ACPI: IRQ0 used by override.

[    0.000000] ACPI: IRQ2 used by override.

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000

[    0.000000] smpboot: 32 Processors exceeds NR_CPUS limit of 8

[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs

[    0.000000] nr_irqs_gsi: 72

[    0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000

[    0.000000] PM: Registered nosave memory: 00000000bf379000 - 00000000bf38f000

[    0.000000] PM: Registered nosave memory: 00000000bf38f000 - 00000000bf3ce000

[    0.000000] PM: Registered nosave memory: 00000000bf3ce000 - 00000000c0000000

[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000

[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000

[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000

[    0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000

[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices

[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1

[    0.000000] PERCPU: Embedded 24 pages/cpu @ffff88183fc00000 s69376 r8192 d20736 u262144

[    0.000000] pcpu-alloc: s69376 r8192 d20736 u262144 alloc=1*2097152

[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 24818477

[    0.000000] Kernel command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=C7LWN09761 mac1=0024E84B993C mac2=0024E84B993E mac3=0024E84B9940 mac4=0024E84B9942 netif_num=4 vid=0x058f pid=0x6387

[    0.000000] Power on seq num: 0

[    0.000000] Synology Hardware Version: DS3615xs-j

[    0.000000] Vender format version: 2

[    0.000000] Serial Number: C7LWN09761

[    0.000000] Mac1: 0024E84B993C

[    0.000000] Mac2: 0024E84B993E

[    0.000000] Mac3: 0024E84B9940

[    0.000000] Mac4: 0024E84B9942

[    0.000000] Internal netif num: 4

[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[    0.000000] Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)

[    0.000000] Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)

[    0.000000] Memory: 98990232k/101711872k available (4806k kernel code, 1061796k absent, 1659844k reserved, 3800k data, 760k init)

[    0.000000] Hierarchical RCU implementation.

[    0.000000]     CONFIG_RCU_FANOUT set to non-default value of 32

[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.

[    0.000000] NR_IRQS:4352 nr_irqs:1288 16

[    0.000000] Console: colour dummy device 80x25

[    0.000000] console [ttyS0] enabled

[    0.000000] allocated 402653184 bytes of page_cgroup

[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[    0.000000] hpet clockevent registered

[    0.000000] tsc: Fast TSC calibration using PIT

[    0.001000] tsc: Detected 2260.944 MHz processor

[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.88 BogoMIPS (lpj=2260944)

[    0.000006] pid_max: default: 32768 minimum: 301

[    0.000040] Security Framework initialized

[    0.000046] AppArmor: AppArmor initialized

[    0.000056] Mount-cache hash table entries: 256

[    0.000240] Initializing cgroup subsys memory

[    0.000251] Initializing cgroup subsys devices

[    0.000253] Initializing cgroup subsys freezer

[    0.000254] Initializing cgroup subsys blkio

[    0.000277] CPU: Physical Processor ID: 1

[    0.000278] CPU: Processor Core ID: 0

[    0.000282] mce: CPU supports 9 MCE banks

[    0.000292] CPU0: Thermal monitoring enabled (TM1)

[    0.000302] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7

               Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32

               tlb_flushall_shift: 6

[    0.000374] Freeing SMP alternatives: 24k freed

[    0.000381] ACPI: Core revision 20130328

[    0.001704] ACPI: All ACPI Tables successfully acquired

[    0.001869] dmar: Host address width 40

[    0.001870] dmar: DRHD base: 0x000000fed90000 flags: 0x1

[    0.001877] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020f6

[    0.001879] dmar: RMRR base: 0x000000bf4c8000 end: 0x000000bf4dffff

[    0.001881] dmar: RMRR base: 0x000000bf4b1000 end: 0x000000bf4bffff

[    0.001882] dmar: RMRR base: 0x000000bf4a1000 end: 0x000000bf4a1fff

[    0.001883] dmar: RMRR base: 0x000000bf4a3000 end: 0x000000bf4a3fff

[    0.001884] dmar: RMRR base: 0x000000bf4a5000 end: 0x000000bf4a5fff

[    0.001885] dmar: RMRR base: 0x000000bf4a7000 end: 0x000000bf4a7fff

[    0.001887] dmar: RMRR base: 0x000000bf4c0000 end: 0x000000bf4c0fff

[    0.001888] dmar: RMRR base: 0x000000bf4c2000 end: 0x000000bf4c2fff

[    0.001889] dmar: ATSR flags: 0x0

[    0.001994] This system BIOS has enabled interrupt remapping

               on a chipset that contains an erratum making that

               feature unstable.  To maintain system stability

               interrupt remapping is being disabled.  Please

               contact your BIOS vendor for an update

[    0.002607] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[    0.012611] smpboot: CPU0: Intel(R) Xeon(R) CPU           L5640  @ 2.27GHz (fam: 06, model: 2c, stepping: 02)

[    0.114113] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.

[    0.114120] perf_event_intel: CPUID marked event: 'bus cycles' unavailable

[    0.114122] ... version:                3

[    0.114123] ... bit width:              48

[    0.114124] ... generic registers:      4

[    0.114125] ... value mask:             0000ffffffffffff

[    0.114126] ... max period:             000000007fffffff

[    0.114127] ... fixed-purpose events:   3

[    0.114127] ... event mask:             000000070000000f

[    0.114372] smpboot: Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 OK

[    0.285225] Brought up 8 CPUs

[    0.285229] smpboot: Total of 8 processors activated (36174.91 BogoMIPS)

[    0.296065] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.

[    0.296420] devtmpfs: initialized

[    0.296858] xor: measuring software checksum speed

[    0.306141]    prefetch64-sse: 10640.000 MB/sec

[    0.316143]    generic_sse:  9340.000 MB/sec

[    0.316144] xor: using function: prefetch64-sse (10640.000 MB/sec)

[    0.316206] NET: Registered protocol family 16

[    0.316696] ACPI: bus type PCI registered

[    0.316843] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[    0.316847] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820

[    0.317096] PCI: Using configuration type 1 for base access

[    0.322929] bio: create slab <bio-0> at 0

[    0.339155] raid6: sse2x1   gen()  6156 MB/s

[    0.356152] raid6: sse2x1   xor()  4841 MB/s

[    0.373156] raid6: sse2x2   gen()  7250 MB/s

[    0.390158] raid6: sse2x2   xor()  5611 MB/s

[    0.407163] raid6: sse2x4   gen()  8156 MB/s

[    0.424165] raid6: sse2x4   xor()  6171 MB/s

[    0.424166] raid6: using algorithm sse2x4 gen() (8156 MB/s)

[    0.424167] raid6: .... xor() 6171 MB/s, rmw enabled

[    0.424168] raid6: using ssse3x2 recovery algorithm

[    0.424208] ACPI: Added _OSI(Module Device)

[    0.424209] ACPI: Added _OSI(Processor Device)

[    0.424210] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.424212] ACPI: Added _OSI(Processor Aggregator Device)

[    0.424704] ACPI: EC: Look up EC in DSDT

[    0.425422] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored

[    0.426386] ACPI: Interpreter enabled

[    0.426396] ACPI: (supports S0 S4 S5)

[    0.426397] ACPI: Using IOAPIC for interrupt routing

[    0.426451] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[    0.426503] ACPI: No dock devices found.

[    0.433668] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[    0.433907] PCI host bridge to bus 0000:00

[    0.433914] pci_bus 0000:00: root bus resource [bus 00-ff]

[    0.433917] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]

[    0.433920] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]

[    0.433923] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]

[    0.433925] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfdffffff]

[    0.433928] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]

[    0.433944] pci 0000:00:00.0: [8086:3406] type 00 class 0x060000

[    0.433997] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold

[    0.434087] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400

[    0.434145] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold

[    0.434229] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400

[    0.434286] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold

[    0.434367] pci 0000:00:04.0: [8086:340b] type 01 class 0x060400

[    0.434425] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold

[    0.434505] pci 0000:00:05.0: [8086:340c] type 01 class 0x060400

[    0.434567] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold

[    0.434648] pci 0000:00:06.0: [8086:340d] type 01 class 0x060400

[    0.434706] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold

[    0.434787] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400

[    0.434845] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold

[    0.434921] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400

[    0.434971] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold

[    0.435056] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000

[    0.435172] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000

[    0.435311] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000

[    0.435438] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300

[    0.435484] pci 0000:00:1a.0: reg 20: [io  0xec40-0xec5f]

[    0.435582] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300

[    0.435622] pci 0000:00:1a.1: reg 20: [io  0xec60-0xec7f]

[    0.435735] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320

[    0.435760] pci 0000:00:1a.7: reg 10: [mem 0xdf0fe000-0xdf0fe3ff]

[    0.435845] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold

[    0.435925] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300

[    0.435971] pci 0000:00:1d.0: reg 20: [io  0xec80-0xec9f]

[    0.436072] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300

[    0.436118] pci 0000:00:1d.1: reg 20: [io  0xeca0-0xecbf]

[    0.436229] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320

[    0.436255] pci 0000:00:1d.7: reg 10: [mem 0xdf0ff000-0xdf0ff3ff]

[    0.436340] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold

[    0.436419] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401

[    0.436540] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100

[    0.436624] pci 0000:00:1f.0: address space collision: [io  0x0800-0x087f] conflicts with ACPI PM1a_EVT_BLK [??? 0x00000800-0x00000803 flags 0x80000000]

[    0.436629] pci 0000:00:1f.0: quirk: [io  0x0880-0x08bf] claimed by ICH6 GPIO

[    0.436632] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)

[    0.436635] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)

[    0.436637] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)

[    0.436737] pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018f

[    0.436755] pci 0000:00:1f.2: reg 10: [io  0xec10-0xec17]

[    0.436766] pci 0000:00:1f.2: reg 14: [io  0xec08-0xec0b]

[    0.436773] pci 0000:00:1f.2: reg 18: [io  0xec18-0xec1f]

[    0.436780] pci 0000:00:1f.2: reg 1c: [io  0xec0c-0xec0f]

[    0.436788] pci 0000:00:1f.2: reg 20: [io  0xec20-0xec2f]

[    0.436795] pci 0000:00:1f.2: reg 24: [io  0xec30-0xec3f]

[    0.436975] pci 0000:01:00.0: [14e4:1639] type 00 class 0x020000

[    0.436990] pci 0000:01:00.0: reg 10: [mem 0xd6000000-0xd7ffffff 64bit]

[    0.437068] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold

[    0.437148] pci 0000:01:00.1: [14e4:1639] type 00 class 0x020000

[    0.437166] pci 0000:01:00.1: reg 10: [mem 0xd8000000-0xd9ffffff 64bit]

[    0.437248] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold

[    0.439579] pci 0000:00:01.0: PCI bridge to [bus 01]

[    0.439585] pci 0000:00:01.0:   bridge window [mem 0xd6000000-0xd9ffffff]

[    0.439712] pci 0000:02:00.0: [14e4:1639] type 00 class 0x020000

[    0.439731] pci 0000:02:00.0: reg 10: [mem 0xda000000-0xdbffffff 64bit]

[    0.439809] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold

[    0.439890] pci 0000:02:00.1: [14e4:1639] type 00 class 0x020000

[    0.439911] pci 0000:02:00.1: reg 10: [mem 0xdc000000-0xddffffff 64bit]

[    0.439988] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold

[    0.441578] pci 0000:00:03.0: PCI bridge to [bus 02]

[    0.441584] pci 0000:00:03.0:   bridge window [mem 0xda000000-0xddffffff]

[    0.441688] pci 0000:00:04.0: PCI bridge to [bus 03]

[    0.441780] pci 0000:04:00.0: [1000:0072] type 00 class 0x010700

[    0.441792] pci 0000:04:00.0: reg 10: [io  0xfc00-0xfcff]

[    0.441806] pci 0000:04:00.0: reg 14: [mem 0xdf1bc000-0xdf1bffff 64bit]

[    0.441815] pci 0000:04:00.0: reg 1c: [mem 0xdf1c0000-0xdf1fffff 64bit]

[    0.441827] pci 0000:04:00.0: reg 30: [mem 0xdf100000-0xdf17ffff pref]

[    0.441862] pci 0000:04:00.0: supports D1 D2

[    0.441884] pci 0000:04:00.0: reg 174: [mem 0x00000000-0x00003fff 64bit]

[    0.441892] pci 0000:04:00.0: reg 17c: [mem 0x00000000-0x0003ffff 64bit]

[    0.443576] pci 0000:00:05.0: PCI bridge to [bus 04]

[    0.443581] pci 0000:00:05.0:   bridge window [io  0xf000-0xffff]

[    0.443585] pci 0000:00:05.0:   bridge window [mem 0xdf100000-0xdf1fffff]

[    0.443681] pci 0000:00:06.0: PCI bridge to [bus 05]

[    0.443762] pci 0000:00:07.0: PCI bridge to [bus 06]

[    0.443828] pci 0000:00:09.0: PCI bridge to [bus 07]

[    0.443905] pci 0000:08:03.0: [102b:0532] type 00 class 0x030000

[    0.443924] pci 0000:08:03.0: reg 10: [mem 0xd5800000-0xd5ffffff pref]

[    0.443936] pci 0000:08:03.0: reg 14: [mem 0xde7fc000-0xde7fffff]

[    0.443945] pci 0000:08:03.0: reg 18: [mem 0xde800000-0xdeffffff]

[    0.443975] pci 0000:08:03.0: reg 30: [mem 0x00000000-0x0000ffff pref]

[    0.444082] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)

[    0.444091] pci 0000:00:1e.0:   bridge window [mem 0xde000000-0xdeffffff]

[    0.444096] pci 0000:00:1e.0:   bridge window [mem 0xd5800000-0xd5ffffff 64bit pref]

[    0.444098] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)

[    0.444100] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)

[    0.444101] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)

[    0.444103] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfdffffff] (subtractive decode)

[    0.444105] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)

[    0.444129] pci_bus 0000:00: on NUMA node 0

[    0.444218] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)

[    0.444380] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted

[    0.445701] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)

[    0.445760] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)

[    0.445817] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)

[    0.445874] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)

[    0.445930] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)

[    0.445987] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)

[    0.446044] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.

[    0.446101] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)

[    0.446183] ACPI: Enabled 1 GPEs in block 00 to 3F

[    0.446197] acpi root: \_SB_.PCI0 notify handler is installed

[    0.446216] Found 1 acpi root devices

[    0.446401] vgaarb: device added: PCI:0000:08:03.0,decodes=io+mem,owns=io+mem,locks=none

[    0.446402] vgaarb: loaded

[    0.446403] vgaarb: bridge control possible 0000:08:03.0

[    0.446573] SCSI subsystem initialized

[    0.446576] ACPI: bus type ATA registered

[    0.446698] libata version 3.00 loaded.

[    0.446842] pps_core: LinuxPPS API ver. 1 registered

[    0.446843] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[    0.446869] PTP clock support registered

[    0.446975] PCI: Using ACPI for IRQ routing

[    0.452714] PCI: Discovered peer bus fe

[    0.452716] PCI: root bus fe: using default resources

[    0.452717] PCI: Probing PCI hardware (bus fe)

[    0.452754] PCI host bridge to bus 0000:fe

[    0.452756] pci_bus 0000:fe: root bus resource [io  0x0000-0xffff]

[    0.452758] pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]

[    0.452763] pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff]

[    0.452771] pci 0000:fe:00.0: [8086:2c70] type 00 class 0x060000

[    0.452837] pci 0000:fe:00.1: [8086:2d81] type 00 class 0x060000

[    0.452891] pci 0000:fe:02.0: [8086:2d90] type 00 class 0x060000

[    0.452962] pci 0000:fe:02.1: [8086:2d91] type 00 class 0x060000

[    0.453026] pci 0000:fe:02.2: [8086:2d92] type 00 class 0x060000

[    0.453099] pci 0000:fe:02.3: [8086:2d93] type 00 class 0x060000

[    0.453163] pci 0000:fe:02.4: [8086:2d94] type 00 class 0x060000

[    0.453214] pci 0000:fe:02.5: [8086:2d95] type 00 class 0x060000

[    0.453284] pci 0000:fe:03.0: [8086:2d98] type 00 class 0x060000

[    0.453335] pci 0000:fe:03.1: [8086:2d99] type 00 class 0x060000

[    0.453407] pci 0000:fe:03.2: [8086:2d9a] type 00 class 0x060000

[    0.453474] pci 0000:fe:03.4: [8086:2d9c] type 00 class 0x060000

[    0.453542] pci 0000:fe:04.0: [8086:2da0] type 00 class 0x060000

[    0.453658] pci 0000:fe:04.1: [8086:2da1] type 00 class 0x060000

[    0.453709] pci 0000:fe:04.2: [8086:2da2] type 00 class 0x060000

[    0.453765] pci 0000:fe:04.3: [8086:2da3] type 00 class 0x060000

[    0.453843] pci 0000:fe:05.0: [8086:2da8] type 00 class 0x060000

[    0.453906] pci 0000:fe:05.1: [8086:2da9] type 00 class 0x060000

[    0.453978] pci 0000:fe:05.2: [8086:2daa] type 00 class 0x060000

[    0.454044] pci 0000:fe:05.3: [8086:2dab] type 00 class 0x060000

[    0.454100] pci 0000:fe:06.0: [8086:2db0] type 00 class 0x060000

[    0.454169] pci 0000:fe:06.1: [8086:2db1] type 00 class 0x060000

[    0.454242] pci 0000:fe:06.2: [8086:2db2] type 00 class 0x060000

[    0.454310] pci 0000:fe:06.3: [8086:2db3] type 00 class 0x060000

[    0.454385] pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe

[    0.454389] PCI: Discovered peer bus ff

[    0.454390] PCI: root bus ff: using default resources

[    0.454391] PCI: Probing PCI hardware (bus ff)

[    0.454424] PCI host bridge to bus 0000:ff

[    0.454426] pci_bus 0000:ff: root bus resource [io  0x0000-0xffff]

[    0.454428] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xffffffffff]

[    0.454430] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]

[    0.454435] pci 0000:ff:00.0: [8086:2c70] type 00 class 0x060000

[    0.454492] pci 0000:ff:00.1: [8086:2d81] type 00 class 0x060000

[    0.454561] pci 0000:ff:02.0: [8086:2d90] type 00 class 0x060000

[    0.454621] pci 0000:ff:02.1: [8086:2d91] type 00 class 0x060000

[    0.454687] pci 0000:ff:02.2: [8086:2d92] type 00 class 0x060000

[    0.454745] pci 0000:ff:02.3: [8086:2d93] type 00 class 0x060000

[    0.454809] pci 0000:ff:02.4: [8086:2d94] type 00 class 0x060000

[    0.454863] pci 0000:ff:02.5: [8086:2d95] type 00 class 0x060000

[    0.454937] pci 0000:ff:03.0: [8086:2d98] type 00 class 0x060000

[    0.455011] pci 0000:ff:03.1: [8086:2d99] type 00 class 0x060000

[    0.455076] pci 0000:ff:03.2: [8086:2d9a] type 00 class 0x060000

[    0.455129] pci 0000:ff:03.4: [8086:2d9c] type 00 class 0x060000

[    0.455204] pci 0000:ff:04.0: [8086:2da0] type 00 class 0x060000

[    0.455263] pci 0000:ff:04.1: [8086:2da1] type 00 class 0x060000

[    0.455332] pci 0000:ff:04.2: [8086:2da2] type 00 class 0x060000

[    0.455403] pci 0000:ff:04.3: [8086:2da3] type 00 class 0x060000

[    0.455462] pci 0000:ff:05.0: [8086:2da8] type 00 class 0x060000

[    0.455515] pci 0000:ff:05.1: [8086:2da9] type 00 class 0x060000

[    0.455585] pci 0000:ff:05.2: [8086:2daa] type 00 class 0x060000

[    0.455658] pci 0000:ff:05.3: [8086:2dab] type 00 class 0x060000

[    0.455720] pci 0000:ff:06.0: [8086:2db0] type 00 class 0x060000

[    0.455775] pci 0000:ff:06.1: [8086:2db1] type 00 class 0x060000

[    0.455843] pci 0000:ff:06.2: [8086:2db2] type 00 class 0x060000

[    0.455915] pci 0000:ff:06.3: [8086:2db3] type 00 class 0x060000

[    0.455990] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff

[    0.455995] PCI: pci_cache_line_size set to 64 bytes

[    0.456086] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]

[    0.456087] e820: reserve RAM buffer [mem 0xbf379000-0xbfffffff]

[    0.456361] Switching to clocksource hpet

[    0.456507] AppArmor: AppArmor Filesystem Enabled

[    0.456585] pnp: PnP ACPI init

[    0.456600] ACPI: bus type PNP registered

[    0.456714] pnp 00:00: [dma 4]

[    0.456782] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)

[    0.456874] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)

[    0.457000] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)

[    0.457091] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)

[    0.457464] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)

[    0.457794] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)

[    0.458923] system 00:06: [io  0x0800-0x087f] could not be reserved

[    0.458928] system 00:06: [io  0x0880-0x08ff] could not be reserved

[    0.458931] system 00:06: [io  0x0900-0x091f] has been reserved

[    0.458934] system 00:06: [io  0x0920-0x0923] has been reserved

[    0.458937] system 00:06: [io  0x0924] has been reserved

[    0.458940] system 00:06: [io  0x0c00-0x0c7f] has been reserved

[    0.458943] system 00:06: [io  0x0ca0-0x0ca7] has been reserved

[    0.458946] system 00:06: [io  0x0ca9-0x0cab] has been reserved

[    0.458948] system 00:06: [io  0x0cad-0x0caf] has been reserved

[    0.458952] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)

[    0.459011] pnp 00:07: [irq 0 disabled]

[    0.459099] system 00:07: [io  0x0ca8] has been reserved

[    0.459103] system 00:07: [io  0x0cac] has been reserved

[    0.459107] system 00:07: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)

[    0.460003] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved

[    0.460008] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.460126] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)

[    0.460232] system 00:0a: [mem 0xfed90000-0xfed91fff] could not be reserved

[    0.460237] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.460460] pnp: PnP ACPI: found 11 devices

[    0.460462] ACPI: bus type PNP unregistered

[    0.471021] pci 0000:00:1f.0: BAR 13: [io  0x0800-0x087f] has bogus alignment

[    0.471027] pci 0000:00:01.0: PCI bridge to [bus 01]

[    0.471033] pci 0000:00:01.0:   bridge window [mem 0xd6000000-0xd9ffffff]

[    0.471040] pci 0000:00:03.0: PCI bridge to [bus 02]

[    0.471045] pci 0000:00:03.0:   bridge window [mem 0xda000000-0xddffffff]

[    0.471052] pci 0000:00:04.0: PCI bridge to [bus 03]

[    0.471070] pci 0000:04:00.0: reg 174: [mem 0x00000000-0x00003fff 64bit]

[    0.471080] pci 0000:04:00.0: reg 17c: [mem 0x00000000-0x0003ffff 64bit]

[    0.471089] pci 0000:04:00.0: reg 174: [mem 0x00000000-0x00003fff 64bit]

[    0.471099] pci 0000:04:00.0: reg 17c: [mem 0x00000000-0x0003ffff 64bit]

[    0.471104] pci 0000:04:00.0: BAR 9: can't assign mem (size 0x400000)

[    0.471114] pci 0000:04:00.0: reg 174: [mem 0x00000000-0x00003fff 64bit]

[    0.471117] pci 0000:04:00.0: BAR 7: can't assign mem (size 0x40000)

[    0.471119] pci 0000:00:05.0: PCI bridge to [bus 04]

[    0.471123] pci 0000:00:05.0:   bridge window [io  0xf000-0xffff]

[    0.471128] pci 0000:00:05.0:   bridge window [mem 0xdf100000-0xdf1fffff]

[    0.471135] pci 0000:00:06.0: PCI bridge to [bus 05]

[    0.471144] pci 0000:00:07.0: PCI bridge to [bus 06]

[    0.471153] pci 0000:00:09.0: PCI bridge to [bus 07]

[    0.471165] pci 0000:08:03.0: BAR 6: assigned [mem 0xde000000-0xde00ffff pref]

[    0.471167] pci 0000:00:1e.0: PCI bridge to [bus 08]

[    0.471173] pci 0000:00:1e.0:   bridge window [mem 0xde000000-0xdeffffff]

[    0.471177] pci 0000:00:1e.0:   bridge window [mem 0xd5800000-0xd5ffffff 64bit pref]

[    0.471184] Some PCI device resources are unassigned, try booting with pci=realloc

[    0.473279] pci 0000:00:1e.0: setting latency timer to 64

[    0.473286] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]

[    0.473289] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]

[    0.473291] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]

[    0.473294] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfdffffff]

[    0.473297] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]

[    0.473299] pci_bus 0000:01: resource 1 [mem 0xd6000000-0xd9ffffff]

[    0.473302] pci_bus 0000:02: resource 1 [mem 0xda000000-0xddffffff]

[    0.473305] pci_bus 0000:04: resource 0 [io  0xf000-0xffff]

[    0.473308] pci_bus 0000:04: resource 1 [mem 0xdf100000-0xdf1fffff]

[    0.473311] pci_bus 0000:08: resource 1 [mem 0xde000000-0xdeffffff]

[    0.473314] pci_bus 0000:08: resource 2 [mem 0xd5800000-0xd5ffffff 64bit pref]

[    0.473316] pci_bus 0000:08: resource 4 [io  0x0000-0x0cf7]

[    0.473319] pci_bus 0000:08: resource 5 [io  0x0d00-0xffff]

[    0.473321] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]

[    0.473324] pci_bus 0000:08: resource 7 [mem 0xc0000000-0xfdffffff]

[    0.473326] pci_bus 0000:08: resource 8 [mem 0xfed40000-0xfed44fff]

[    0.473329] pci_bus 0000:fe: resource 4 [io  0x0000-0xffff]

[    0.473332] pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff]

[    0.473335] pci_bus 0000:ff: resource 4 [io  0x0000-0xffff]

[    0.473338] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xffffffffff]

[    0.473425] NET: Registered protocol family 2

[    0.473737] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)

[    0.474689] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[    0.474907] TCP: Hash tables configured (established 262144 bind 65536)

[    0.474936] TCP: reno registered

[    0.474948] UDP hash table entries: 65536 (order: 9, 2097152 bytes)

[    0.475513] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)

[    0.476159] NET: Registered protocol family 1

[    0.476288] RPC: Registered named UNIX socket transport module.

[    0.476290] RPC: Registered udp transport module.

[    0.476291] RPC: Registered tcp transport module.

[    0.476293] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    0.490523] pci 0000:08:03.0: Boot video device

[    0.490611] PCI: CLS 64 bytes, default 64

[    0.490664] Trying to unpack rootfs image as initramfs...

[    2.586064] Freeing initrd memory: 8892k freed

[    2.609199] IOMMU 0 0xfed90000: using Queued invalidation

[    2.609202] IOMMU passthrough mode = 1

[    2.609231] IOMMU: hardware identity mapping for device 0000:00:00.0

[    2.609234] IOMMU: hardware identity mapping for device 0000:00:01.0

[    2.609237] IOMMU: hardware identity mapping for device 0000:00:03.0

[    2.609239] IOMMU: hardware identity mapping for device 0000:00:04.0

[    2.609242] IOMMU: hardware identity mapping for device 0000:00:05.0

[    2.609244] IOMMU: hardware identity mapping for device 0000:00:06.0

[    2.609246] IOMMU: hardware identity mapping for device 0000:00:07.0

[    2.609249] IOMMU: hardware identity mapping for device 0000:00:09.0

[    2.609251] IOMMU: hardware identity mapping for device 0000:00:14.0

[    2.609254] IOMMU: hardware identity mapping for device 0000:00:14.1

[    2.609256] IOMMU: hardware identity mapping for device 0000:00:14.2

[    2.609258] IOMMU: hardware identity mapping for device 0000:00:1a.0

[    2.609261] IOMMU: hardware identity mapping for device 0000:00:1a.1

[    2.609263] IOMMU: hardware identity mapping for device 0000:00:1a.7

[    2.609265] IOMMU: hardware identity mapping for device 0000:00:1d.0

[    2.609268] IOMMU: hardware identity mapping for device 0000:00:1d.1

[    2.609270] IOMMU: hardware identity mapping for device 0000:00:1d.7

[    2.609273] IOMMU: hardware identity mapping for device 0000:00:1f.0

[    2.609275] IOMMU: hardware identity mapping for device 0000:00:1f.2

[    2.609286] IOMMU: hardware identity mapping for device 0000:01:00.0

[    2.609289] IOMMU: hardware identity mapping for device 0000:01:00.1

[    2.609299] IOMMU: hardware identity mapping for device 0000:02:00.0

[    2.609302] IOMMU: hardware identity mapping for device 0000:02:00.1

[    2.609312] IOMMU: hardware identity mapping for device 0000:04:00.0

[    2.609323] IOMMU: hardware identity mapping for device 0000:fe:00.0

[    2.609326] IOMMU: hardware identity mapping for device 0000:fe:00.1

[    2.609328] IOMMU: hardware identity mapping for device 0000:fe:02.0

[    2.609330] IOMMU: hardware identity mapping for device 0000:fe:02.1

[    2.609333] IOMMU: hardware identity mapping for device 0000:fe:02.2

[    2.609335] IOMMU: hardware identity mapping for device 0000:fe:02.3

[    2.609338] IOMMU: hardware identity mapping for device 0000:fe:02.4

[    2.609340] IOMMU: hardware identity mapping for device 0000:fe:02.5

[    2.609342] IOMMU: hardware identity mapping for device 0000:fe:03.0

[    2.609345] IOMMU: hardware identity mapping for device 0000:fe:03.1

[    2.609347] IOMMU: hardware identity mapping for device 0000:fe:03.2

[    2.609349] IOMMU: hardware identity mapping for device 0000:fe:03.4

[    2.609352] IOMMU: hardware identity mapping for device 0000:fe:04.0

[    2.609354] IOMMU: hardware identity mapping for device 0000:fe:04.1

[    2.609356] IOMMU: hardware identity mapping for device 0000:fe:04.2

[    2.609359] IOMMU: hardware identity mapping for device 0000:fe:04.3

[    2.609361] IOMMU: hardware identity mapping for device 0000:fe:05.0

[    2.609364] IOMMU: hardware identity mapping for device 0000:fe:05.1

[    2.609366] IOMMU: hardware identity mapping for device 0000:fe:05.2

[    2.609369] IOMMU: hardware identity mapping for device 0000:fe:05.3

[    2.609371] IOMMU: hardware identity mapping for device 0000:fe:06.0

[    2.609373] IOMMU: hardware identity mapping for device 0000:fe:06.1

[    2.609376] IOMMU: hardware identity mapping for device 0000:fe:06.2

[    2.609378] IOMMU: hardware identity mapping for device 0000:fe:06.3

[    2.609389] IOMMU: hardware identity mapping for device 0000:ff:00.0

[    2.609391] IOMMU: hardware identity mapping for device 0000:ff:00.1

[    2.609393] IOMMU: hardware identity mapping for device 0000:ff:02.0

[    2.609396] IOMMU: hardware identity mapping for device 0000:ff:02.1

[    2.609398] IOMMU: hardware identity mapping for device 0000:ff:02.2

[    2.609401] IOMMU: hardware identity mapping for device 0000:ff:02.3

[    2.609403] IOMMU: hardware identity mapping for device 0000:ff:02.4

[    2.609405] IOMMU: hardware identity mapping for device 0000:ff:02.5

[    2.609407] IOMMU: hardware identity mapping for device 0000:ff:03.0

[    2.609410] IOMMU: hardware identity mapping for device 0000:ff:03.1

[    2.609412] IOMMU: hardware identity mapping for device 0000:ff:03.2

[    2.609415] IOMMU: hardware identity mapping for device 0000:ff:03.4

[    2.609418] IOMMU: hardware identity mapping for device 0000:ff:04.0

[    2.609420] IOMMU: hardware identity mapping for device 0000:ff:04.1

[    2.609422] IOMMU: hardware identity mapping for device 0000:ff:04.2

[    2.609425] IOMMU: hardware identity mapping for device 0000:ff:04.3

[    2.609427] IOMMU: hardware identity mapping for device 0000:ff:05.0

[    2.609430] IOMMU: hardware identity mapping for device 0000:ff:05.1

[    2.609432] IOMMU: hardware identity mapping for device 0000:ff:05.2

[    2.609434] IOMMU: hardware identity mapping for device 0000:ff:05.3

[    2.609437] IOMMU: hardware identity mapping for device 0000:ff:06.0

[    2.609439] IOMMU: hardware identity mapping for device 0000:ff:06.1

[    2.609442] IOMMU: hardware identity mapping for device 0000:ff:06.2

[    2.609444] IOMMU: hardware identity mapping for device 0000:ff:06.3

[    2.609446] IOMMU: Setting RMRR:

[    2.609448] Ignoring identity map for HW passthrough device 0000:00:1d.7 [0xbf4c2000 - 0xbf4c2fff]

[    2.609450] Ignoring identity map for HW passthrough device 0000:00:1a.7 [0xbf4c0000 - 0xbf4c0fff]

[    2.609451] Ignoring identity map for HW passthrough device 0000:00:1d.1 [0xbf4a7000 - 0xbf4a7fff]

[    2.609453] Ignoring identity map for HW passthrough device 0000:00:1d.0 [0xbf4a5000 - 0xbf4a5fff]

[    2.609455] Ignoring identity map for HW passthrough device 0000:00:1a.1 [0xbf4a3000 - 0xbf4a3fff]

[    2.609457] Ignoring identity map for HW passthrough device 0000:00:1a.0 [0xbf4a1000 - 0xbf4a1fff]

[    2.609458] Ignoring identity map for HW passthrough device 0000:00:1a.0 [0xbf4b1000 - 0xbf4bffff]

[    2.609460] Ignoring identity map for HW passthrough device 0000:00:1a.1 [0xbf4b1000 - 0xbf4bffff]

[    2.609462] Ignoring identity map for HW passthrough device 0000:00:1d.0 [0xbf4b1000 - 0xbf4bffff]

[    2.609464] Ignoring identity map for HW passthrough device 0000:00:1d.1 [0xbf4b1000 - 0xbf4bffff]

[    2.609465] Ignoring identity map for HW passthrough device 0000:00:1a.7 [0xbf4c8000 - 0xbf4dffff]

[    2.609467] Ignoring identity map for HW passthrough device 0000:00:1d.7 [0xbf4c8000 - 0xbf4dffff]

[    2.609470] IOMMU: Prepare 0-16MiB unity mapping for LPC

[    2.609471] Ignoring identity map for HW passthrough device 0000:00:1f.0 [0x0 - 0xffffff]

[    2.609508] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O

[    2.624245] audit: initializing netlink socket (disabled)

[    2.624266] type=2000 audit(1505957585.488:1): initialized

[    2.627525] bounce pool size: 64 pages

[    2.627853] VFS: Disk quotas dquot_6.5.2

[    2.627917] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    2.628257] NFS: Registering the id_resolver key type

[    2.628268] Key type id_resolver registered

[    2.628269] Key type id_legacy registered

[    2.628283] msgmni has been set to 32768

[    2.628936] async_tx: api initialized (async)

[    2.629044] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)

[    2.629047] io scheduler noop registered

[    2.629049] io scheduler deadline registered

[    2.629069] io scheduler cfq registered (default)

[    2.629315] pcieport 0000:00:01.0: irq 73 for MSI/MSI-X

[    2.630199] pcieport 0000:00:03.0: irq 74 for MSI/MSI-X

[    2.630778] pcieport 0000:00:04.0: irq 75 for MSI/MSI-X

[    2.631368] pcieport 0000:00:05.0: irq 76 for MSI/MSI-X

[    2.631682] pcieport 0000:00:06.0: irq 77 for MSI/MSI-X

[    2.632726] pcieport 0000:00:07.0: irq 78 for MSI/MSI-X

[    2.633253] pcieport 0000:00:09.0: irq 79 for MSI/MSI-X

[    2.635269] aer 0000:00:01.0:pcie02: service driver aer loaded

[    2.635296] aer 0000:00:03.0:pcie02: service driver aer loaded

[    2.635323] aer 0000:00:04.0:pcie02: service driver aer loaded

[    2.635349] aer 0000:00:05.0:pcie02: service driver aer loaded

[    2.635376] aer 0000:00:06.0:pcie02: service driver aer loaded

[    2.635402] aer 0000:00:07.0:pcie02: service driver aer loaded

[    2.635427] aer 0000:00:09.0:pcie02: service driver aer loaded

[    2.899474] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled

[    2.920473] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[    2.920639] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250

[    2.946534] brd: module loaded

[    2.947411] Unknown LPC device 2918

[    2.950261] Loading iSCSI transport class v2.0-870.

[    2.960865] rdac: device handler registered

[    2.968911] i8042: PNP: No PS/2 controller found. Probing ports directly.

[    2.972107] serio: i8042 KBD port at 0x60,0x64 irq 1

[    2.972114] serio: i8042 AUX port at 0x60,0x64 irq 12

[    2.972253] rtc_cmos 00:03: RTC can wake from S4

[    2.972495] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0

[    2.972525] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs

[    2.972621] i2c /dev entries driver

[    2.975592] md: linear personality registered for level -1

[    2.975596] md: raid0 personality registered for level 0

[    2.975598] md: raid1 personality registered for level 1

[    2.975600] md: raid10 personality registered for level 10

[    2.976370] md: raid6 personality registered for level 6

[    2.976373] md: raid5 personality registered for level 5

[    2.976375] md: raid4 personality registered for level 4

[    2.976376] md: raidF1 personality registered for level 45

[    2.977345] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com

[    2.977350] cpuidle: using governor ladder

[    2.977352] cpuidle: using governor menu

[    2.977483] TCP: cubic registered

[    2.977486] NET: Registered protocol family 17

[    2.977514] Key type dns_resolver registered

[    2.983604] registered taskstats version 1

[    2.984844] rtc_cmos 00:03: setting system clock to 2017-09-21 01:33:06 UTC (1505957586)

[    2.985622] Freeing unused kernel memory: 760k freed

[    2.985827] Write protecting the kernel read-only data: 8192k

[    2.986032] Freeing unused kernel memory: 1328k freed

[    2.987699] Freeing unused kernel memory: 500k freed

[    3.060206] ACPI: bus type USB registered

[    3.060411] usbcore: registered new interface driver usbfs

[    3.060513] usbcore: registered new interface driver hub

[    3.060650] usbcore: registered new interface driver ethub

[    3.060781] usbcore: registered new device driver usb

[    3.073090] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    3.078755] ehci-pci: EHCI PCI platform driver

[    3.079147] ehci-pci 0000:00:1a.7: setting latency timer to 64

[    3.079174] ehci-pci 0000:00:1a.7: EHCI Host Controller

[    3.079184] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1

[    3.079199] ehci-pci 0000:00:1a.7: debug port 1

[    3.079218] 32bit 0000:00:1a.7 uses non-identity mapping

[    3.083160] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported

[    3.083182] ehci-pci 0000:00:1a.7: irq 19, io mem 0xdf0fe000

[    3.088996] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00

[    3.089317] hub 1-0:1.0: USB hub found

[    3.089323] hub 1-0:1.0: 4 ports detected

[    3.089722] ehci-pci 0000:00:1d.7: setting latency timer to 64

[    3.089739] ehci-pci 0000:00:1d.7: EHCI Host Controller

[    3.089746] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2

[    3.089758] ehci-pci 0000:00:1d.7: debug port 1

[    3.089774] 32bit 0000:00:1d.7 uses non-identity mapping

[    3.093720] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported

[    3.093743] ehci-pci 0000:00:1d.7: irq 21, io mem 0xdf0ff000

[    3.098995] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00

[    3.099300] hub 2-0:1.0: USB hub found

[    3.099306] hub 2-0:1.0: 4 ports detected

[    3.106958] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    3.112992] uhci_hcd: USB Universal Host Controller Interface driver

[    3.113374] uhci_hcd 0000:00:1a.0: setting latency timer to 64

[    3.113379] uhci_hcd 0000:00:1a.0: UHCI Host Controller

[    3.113387] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3

[    3.113428] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000ec40

[    3.113442] 32bit 0000:00:1a.0 uses non-identity mapping

[    3.113828] hub 3-0:1.0: USB hub found

[    3.113836] hub 3-0:1.0: 2 ports detected

[    3.114245] uhci_hcd 0000:00:1a.1: setting latency timer to 64

[    3.114249] uhci_hcd 0000:00:1a.1: UHCI Host Controller

[    3.114256] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4

[    3.114292] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec60

[    3.114304] 32bit 0000:00:1a.1 uses non-identity mapping

[    3.114693] hub 4-0:1.0: USB hub found

[    3.114699] hub 4-0:1.0: 2 ports detected

[    3.115097] uhci_hcd 0000:00:1d.0: setting latency timer to 64

[    3.115101] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[    3.115108] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5

[    3.115135] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec80

[    3.115146] 32bit 0000:00:1d.0 uses non-identity mapping

[    3.115501] hub 5-0:1.0: USB hub found

[    3.115514] hub 5-0:1.0: 2 ports detected

[    3.115902] uhci_hcd 0000:00:1d.1: setting latency timer to 64

[    3.115906] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[    3.115913] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6

[    3.115950] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0

[    3.115961] 32bit 0000:00:1d.1 uses non-identity mapping

[    3.116344] hub 6-0:1.0: USB hub found

[    3.116351] hub 6-0:1.0: 2 ports detected

[    3.150037] usbcore: registered new interface driver usb-storage

[    3.169007] VMware PVSCSI driver - version 1.0.2.0-k

[    3.174892] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)

[    3.180908] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)

[    3.198982] Fusion MPT base driver 3.04.20

[    3.198985] Copyright (c) 1999-2008 LSI Corporation

[    3.210418] Fusion MPT SPI Host driver 3.04.20

[    3.216510] Fusion MPT SAS Host driver 3.04.20

[    3.222490] Fusion MPT misc device (ioctl) driver 3.04.20

[    3.222628] mptctl: Registered with Fusion MPT base driver

[    3.222631] mptctl: /dev/mptctl @ (major,minor=10,220)

[    3.228521] ata_piix 0000:00:1f.2: version 2.13

[    3.228883] ata_piix 0000:00:1f.2: MAP [

[    3.228886]  P0 -- P1 -- ]

[    3.379073] ata_piix 0000:00:1f.2: setting latency timer to 64

[    3.379093] 32bit 0000:00:1f.2 uses non-identity mapping

[    3.379833] scsi0 : ata_piix

[    3.380098] scsi1 : ata_piix

[    3.380490] ata1: SATA max UDMA/133 cmd 0xec10 ctl 0xec08 bmdma 0xec20 irq 23

[    3.380495] ata2: SATA max UDMA/133 cmd 0xec18 ctl 0xec0c bmdma 0xec28 irq 23

[    3.412069] usb 1-3: new high-speed USB device number 2 using ehci-pci

[    3.547463] Got empty serial number. Generate serial number from product.

[    3.547836] hub 1-3:1.0: USB hub found

[    3.547961] hub 1-3:1.0: 3 ports detected

[    3.616110] tsc: Refined TSC clocksource calibration: 2260.999 MHz

[    3.616116] Switching to clocksource tsc

[    3.836196] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[    3.836488] ata1.00: ATA-9: SATA SSD, SAFM12.2, max UDMA/133

[    3.836491] ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 0/32)

[    3.836872] ata1.00: configured for UDMA/133

[    3.836889] ata1.00: Find SSD disks. [SATA SSD]

[    3.837250] scsi 0:0:0:0: Direct-Access     SATA     SSD                      SAFM PQ: 0 ANSI: 5

[    3.837613] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)

[    3.837715] sd 0:0:0:0: [sda] Write Protect is off

[    3.837718] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    3.837747] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    3.838321]  sda: sda1 sda2 sda3

[    3.839398] sd 0:0:0:0: [sda] Attached SCSI disk

[    3.965187] usb 2-3: new high-speed USB device number 3 using ehci-pci

[    4.126891] usb-storage 2-3:1.0: USB Mass Storage device detected

[    4.126947] scsi2 : usb-storage 2-3:1.0

[    4.127374] usb-storage 2-3:1.1: USB Mass Storage device detected

[    4.127426] scsi3 : usb-storage 2-3:1.1

[    4.354273] usb 5-2: new full-speed USB device number 2 using uhci_hcd

[    4.387283] ata2: failed to resume link (SControl 0)

[    4.398086] ata2: SATA link down (SStatus 4 SControl 0)

[    4.404106] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013

[    4.410868] mpt2sas version 20.00.00.00 loaded

[    4.411034] scsi4 : Fusion MPT SAS Host

[    4.411642] mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (99067688 kB)

[    4.483313] mpt2sas0: MSI-X vectors supported: 1, no of cores: 8, max_msix_vectors: -1

[    4.483337] mpt2sas 0000:04:00.0: irq 80 for MSI/MSI-X

[    4.483364] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 80

[    4.483367] mpt2sas0: iomem(0x00000000df1bc000), mapped(0xffffc90010208000), size(16384)

[    4.483369] mpt2sas0: ioport(0x000000000000fc00), size(256)

[    4.526554] drivers/usb/core/hub.c (2679) Same device found. Change serial to 20120430 

[    4.526558] drivers/usb/core/hub.c (2679) Same device found. Change serial to 20120431 

[    4.555320] mpt2sas0: sending message unit reset !!

[    4.557320] mpt2sas0: message unit reset: SUCCESS

[    4.607723] mpt2sas0: Allocated physical memory: size(7445 kB)

[    4.607726] mpt2sas0: Current Controller Queue Depth(3307), Max Controller Queue Depth(3432)

[    4.607728] mpt2sas0: Scatter Gather Elements per IO(128)

[    4.666856] mpt2sas0: LSISAS2008: FWVersion(20.00.07.00), ChipRevision(0x03), BiosVersion(07.39.00.00)

[    4.666859] mpt2sas0: Protocol=(Initiator,Target), Capabilities=(TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)

[    4.666982] mpt2sas0: sending port enable !!

[    4.733483] usb 1-3.1: new high-speed USB device number 3 using ehci-pci

[    4.836896] usb-storage 1-3.1:1.0: USB Mass Storage device detected

[    4.836955] scsi5 : usb-storage 1-3.1:1.0

[    4.920527] usb 1-3.3: new high-speed USB device number 4 using ehci-pci

[    5.016549] usb-storage 1-3.3:1.0: USB Mass Storage device detected

[    5.016602] scsi6 : usb-storage 1-3.3:1.0

[    5.130138] scsi 2:0:0:0: Direct-Access     iDRAC    LCDRIVE                  0323 PQ: 0 ANSI: 0 CCS

[    5.133516] scsi 3:0:0:0: CD-ROM            iDRAC    Virtual CD               0323 PQ: 0 ANSI: 0

[    5.134277] sd 2:0:0:0: [sdu] Attached SCSI removable disk

[    5.135900] scsi 3:0:0:1: Direct-Access     iDRAC    Virtual Floppy           0323 PQ: 0 ANSI: 0 CCS

[    5.139141] sd 3:0:0:1: [sdv] Attached SCSI removable disk

[    5.843743] scsi 5:0:0:0: Direct-Access     Generic  Flash Disk               8.07 PQ: 0 ANSI: 4

[    5.845245] sd 5:0:0:0: [synoboot] 7987200 512-byte logical blocks: (4.08 GB/3.80 GiB)

[    5.846243] sd 5:0:0:0: [synoboot] Write Protect is off

[    5.846248] sd 5:0:0:0: [synoboot] Mode Sense: 23 00 00 00

[    5.847374] sd 5:0:0:0: [synoboot] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA

[    5.851998]  synoboot: synoboot1 synoboot2

[    5.855245] sd 5:0:0:0: [synoboot] Attached SCSI removable disk

[    6.021785] scsi 6:0:0:0: Direct-Access     Generic  USB Flash Disk           0.00 PQ: 0 ANSI: 2

[    6.022914] sd 6:0:0:0: [sdw] 503808 512-byte logical blocks: (257 MB/246 MiB)

[    6.023665] sd 6:0:0:0: [sdw] Write Protect is off

[    6.023669] sd 6:0:0:0: [sdw] Mode Sense: 00 00 00 00

[    6.024412] sd 6:0:0:0: [sdw] Asking for cache data failed

[    6.029900] sd 6:0:0:0: [sdw] Assuming drive cache: write through

[    6.039410] sd 6:0:0:0: [sdw] Asking for cache data failed

[    6.044894] sd 6:0:0:0: [sdw] Assuming drive cache: write through

[    6.186332] mpt2sas0: host_add: handle(0x0001), sas_addr(0x500605b002c8b2af), phys(8)

[    6.217354]  sdw: sdw1 sdw2 sdw3

[    6.220453] sd 6:0:0:0: [sdw] Asking for cache data failed

[    6.225935] sd 6:0:0:0: [sdw] Assuming drive cache: write through

[    6.232019] sd 6:0:0:0: [sdw] Attached SCSI removable disk

[   12.313079] mpt2sas0: port enable: SUCCESS

[   12.437059] scsi 4:0:0:0: Direct-Access     ATA      ST2000DM001-1ER164       CC25 PQ: 0 ANSI: 6

[   12.437448] scsi 4:0:0:0: SATA: handle(0x000c), sas_addr(0x4433221102000000), phy(2), device_name(0x0000000000000000)

[   12.437452] scsi 4:0:0:0: SATA: enclosure_logical_id(0x500605b002c8b2af), slot(1)

[   12.437552] scsi 4:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)

[   12.437933] scsi 4:0:0:0: serial_number(            Z4Z29WPC)

[   12.437939] scsi 4:0:0:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)

[   12.438836] sd 4:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)

[   12.438840] sd 4:0:0:0: [sde] 4096-byte physical blocks

[   12.507826] sd 4:0:0:0: [sde] Write Protect is off

[   12.507832] sd 4:0:0:0: [sde] Mode Sense: 7f 00 10 08

[   12.508746] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA

[   12.595736]  sde: sde1 sde2 sde3 < sde5 >

[   12.667889] sd 4:0:0:0: [sde] Attached SCSI disk

[   12.686726] scsi 4:0:1:0: Direct-Access     ATA      ST2000DM001-1ER164       CC25 PQ: 0 ANSI: 6

[   12.687108] scsi 4:0:1:0: SATA: handle(0x0009), sas_addr(0x4433221100000000), phy(0), device_name(0x0000000000000000)

[   12.687113] scsi 4:0:1:0: SATA: enclosure_logical_id(0x500605b002c8b2af), slot(3)

[   12.687213] scsi 4:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)

[   12.687597] scsi 4:0:1:0: serial_number(            Z4Z2A8N0)

[   12.687603] scsi 4:0:1:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)

[   12.688502] sd 4:0:1:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)

[   12.688506] sd 4:0:1:0: [sdf] 4096-byte physical blocks

[   12.754639] sd 4:0:1:0: [sdf] Write Protect is off

[   12.754645] sd 4:0:1:0: [sdf] Mode Sense: 7f 00 10 08

[   12.755553] sd 4:0:1:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA

[   12.835067]  sdf: sdf1 sdf2 sdf3 < sdf5 >

[   12.906342] sd 4:0:1:0: [sdf] Attached SCSI disk

[   12.936733] scsi 4:0:2:0: Direct-Access     ATA      ST2000DM001-1ER164       CC25 PQ: 0 ANSI: 6

[   12.937112] scsi 4:0:2:0: SATA: handle(0x000a), sas_addr(0x4433221101000000), phy(1), device_name(0x0000000000000000)

[   12.937116] scsi 4:0:2:0: SATA: enclosure_logical_id(0x500605b002c8b2af), slot(2)

[   12.937221] scsi 4:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)

[   12.937597] scsi 4:0:2:0: serial_number(            Z4Z2A8VC)

[   12.937603] scsi 4:0:2:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)

[   12.938509] sd 4:0:2:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)

[   12.938513] sd 4:0:2:0: [sdg] 4096-byte physical blocks

[   13.005165] sd 4:0:2:0: [sdg] Write Protect is off

[   13.005170] sd 4:0:2:0: [sdg] Mode Sense: 7f 00 10 08

[   13.006076] sd 4:0:2:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA

[   13.087230]  sdg: sdg1 sdg2 sdg3 < sdg5 >

[   13.165195] sd 4:0:2:0: [sdg] Attached SCSI disk

[   13.185634] scsi 4:0:3:0: Direct-Access     HGST     HDN728080ALE604          W91X PQ: 0 ANSI: 6

[   13.185790] scsi 4:0:3:0: SATA: handle(0x000b), sas_addr(0x4433221106000000), phy(6), device_name(0x0000000000000000)

[   13.185795] scsi 4:0:3:0: SATA: enclosure_logical_id(0x500605b002c8b2af), slot(5)

[   13.185895] scsi 4:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)

[   13.186060] scsi 4:0:3:0: serial_number(R6G12MZY            )

[   13.186066] scsi 4:0:3:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)

[   13.186753] sd 4:0:3:0: [sdh] 15628053168 512-byte logical blocks: (8.00 TB/7.27 TiB)

[   13.186757] sd 4:0:3:0: [sdh] 4096-byte physical blocks

[   13.190597] sd 4:0:3:0: [sdh] Write Protect is off

[   13.190602] sd 4:0:3:0: [sdh] Mode Sense: 7f 00 10 08

[   13.190936] sd 4:0:3:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA

[   13.234492]  sdh: sdh1 sdh2 sdh5 sdh6

[   13.240699] sd 4:0:3:0: [sdh] Attached SCSI disk

[   13.435723] scsi 4:0:4:0: Direct-Access     HGST     HDN728080ALE604          W91X PQ: 0 ANSI: 6

[   13.435882] scsi 4:0:4:0: SATA: handle(0x000d), sas_addr(0x4433221107000000), phy(7), device_name(0x0000000000000000)

[   13.435887] scsi 4:0:4:0: SATA: enclosure_logical_id(0x500605b002c8b2af), slot(4)

[   13.435989] scsi 4:0:4:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)

[   13.436155] scsi 4:0:4:0: serial_number(R6G0WTDY            )

[   13.436161] scsi 4:0:4:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)

[   13.436836] sd 4:0:4:0: [sdi] 15628053168 512-byte logical blocks: (8.00 TB/7.27 TiB)

[   13.436840] sd 4:0:4:0: [sdi] 4096-byte physical blocks

[   13.440666] sd 4:0:4:0: [sdi] Write Protect is off

[   13.440671] sd 4:0:4:0: [sdi] Mode Sense: 7f 00 10 08

[   13.440996] sd 4:0:4:0: [sdi] Write cache: enabled, read cache: enabled, supports DPO and FUA

[   13.486121]  sdi: sdi1 sdi2 sdi5 sdi6

[   13.492276] sd 4:0:4:0: [sdi] Attached SCSI disk

[   13.498660] mpt3sas version 01.100.01.00 loaded

[   13.511048] Adaptec aacraid driver 1.2-0[30200]-ms

[   13.517261] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded

[   13.523279] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.

[   13.529261] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.

[   13.553370] RocketRAID 3xxx/4xxx Controller driver v1.8

[   13.559640] isci: Intel(R) C600 SAS Controller Driver - version 1.1.0

[   13.576951] bromolow_synobios: module license 'Synology Inc.' taints kernel.

[   13.576955] Disabling lock debugging due to kernel taint

[   13.577406] 2017-9-21 1:33:16 UTC

[   13.577410] synobios: load, major number 201

[   13.577414] Brand: Synology

[   13.577416] Model: DS-3615xs

[   13.577419] set group disks wakeup number to 4, spinup time deno 7

[   14.078494] synobios cpu_arch proc entry initialized

[   14.078498] synobios crypto_hw proc entry initialized

[   14.078502] synobios syno_platform proc entry initialized

[   14.089505] synobios: unload

[   19.102230] md: Autodetecting RAID arrays.

[   19.111575] md: invalid raid superblock magic on sda3

[   19.116624] md: sda3 does not have a valid v0.90 superblock, not importing!

[   19.161143] md: invalid raid superblock magic on sde5

[   19.166189] md: sde5 does not have a valid v0.90 superblock, not importing!

[   19.212043] md: invalid raid superblock magic on sdf5

[   19.217090] md: sdf5 does not have a valid v0.90 superblock, not importing!

[   19.263218] md: invalid raid superblock magic on sdg5

[   19.268267] md: sdg5 does not have a valid v0.90 superblock, not importing!

[   19.305056] md: invalid raid superblock magic on sdh5

[   19.310103] md: sdh5 does not have a valid v0.90 superblock, not importing!

[   19.324367] md: invalid raid superblock magic on sdh6

[   19.329411] md: sdh6 does not have a valid v0.90 superblock, not importing!

[   19.369031] md: invalid raid superblock magic on sdi5

[   19.374078] md: sdi5 does not have a valid v0.90 superblock, not importing!

[   19.391618] md: invalid raid superblock magic on sdi6

[   19.396664] md: sdi6 does not have a valid v0.90 superblock, not importing!

[   19.396672] md: Scanned 20 and added 12 devices.

[   19.396674] md: autorun ...

[   19.396676] md: considering sda1 ...

[   19.396688] md:  adding sda1 ...

[   19.396692] md: sda2 has different UUID to sda1

[   19.396696] md:  adding sde1 ...

[   19.396699] md: sde2 has different UUID to sda1

[   19.396703] md:  adding sdf1 ...

[   19.396706] md: sdf2 has different UUID to sda1

[   19.396710] md:  adding sdg1 ...

[   19.396713] md: sdg2 has different UUID to sda1

[   19.396717] md:  adding sdh1 ...

[   19.396720] md: sdh2 has different UUID to sda1

[   19.396724] md:  adding sdi1 ...

[   19.396727] md: sdi2 has different UUID to sda1

[   19.396742] md: created md0

[   19.396745] md: bind<sdi1>

[   19.396759] md: bind<sdh1>

[   19.396767] md: bind<sdg1>

[   19.396775] md: bind<sdf1>

[   19.396783] md: bind<sde1>

[   19.396791] md: bind<sda1>

[   19.396799] md: running: <sda1><sde1><sdf1><sdg1><sdh1><sdi1>

[   19.397034] md/raid1:md0: active with 6 out of 12 mirrors

[   19.397059] md0: detected capacity change from 0 to 2549940224

[   19.397149] md: considering sda2 ...

[   19.397154] md:  adding sda2 ...

[   19.397158] md:  adding sde2 ...

[   19.397162] md:  adding sdf2 ...

[   19.397166] md:  adding sdg2 ...

[   19.397169] md:  adding sdh2 ...

[   19.397173] md:  adding sdi2 ...

[   19.397452] md: created md1

[   19.397455] md: bind<sdi2>

[   19.397463] md: bind<sdh2>

[   19.397472] md: bind<sdg2>

[   19.397480] md: bind<sdf2>

[   19.397489] md: bind<sde2>

[   19.397497] md: bind<sda2>

[   19.397505] md: running: <sda2><sde2><sdf2><sdg2><sdh2><sdi2>

[   19.397723] md/raid1:md1: active with 6 out of 12 mirrors

[   19.397746] md1: detected capacity change from 0 to 2147418112

[   19.397833] md: ... autorun DONE.

[   19.442505]  md0: unknown partition table

[   20.612224] EXT4-fs (md0): barriers disabled

[   20.620234] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: 

[   24.830183] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1

[   25.989159] EXT4-fs (md0): re-mounted. Opts: (null)

[   28.807144] sd 0:0:0:0: Attached scsi generic sg0 type 0

[   28.807224] sd 2:0:0:0: Attached scsi generic sg1 type 0

[   28.807297] scsi 3:0:0:0: Attached scsi generic sg2 type 5

[   28.807367] sd 3:0:0:1: Attached scsi generic sg3 type 0

[   28.807442] sd 5:0:0:0: Attached scsi generic sg4 type 0

[   28.807515] sd 6:0:0:0: Attached scsi generic sg5 type 0

[   28.807586] sd 4:0:0:0: Attached scsi generic sg6 type 0

[   28.807656] sd 4:0:1:0: Attached scsi generic sg7 type 0

[   28.807727] sd 4:0:2:0: Attached scsi generic sg8 type 0

[   28.807801] sd 4:0:3:0: Attached scsi generic sg9 type 0

[   28.807887] sd 4:0:4:0: Attached scsi generic sg10 type 0

[   29.197575]  md1: unknown partition table

[   29.308544] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k 

[   29.592222] zram: module is from the staging directory, the quality is unknown, you have been warned.

[   29.593103] zram: Created 4 device(s) ...

[   29.628018] Adding 14860284k swap on /dev/zram0.  Priority:1 extents:1 across:14860284k SS

[   29.656355] Adding 14860284k swap on /dev/zram1.  Priority:1 extents:1 across:14860284k SS

[   29.685502] Adding 14860284k swap on /dev/zram2.  Priority:1 extents:1 across:14860284k SS

[   29.713752] Adding 14860284k swap on /dev/zram3.  Priority:1 extents:1 across:14860284k SS

[   30.842026] NET: Registered protocol family 10

[   30.881636] sit: IPv6 over IPv4 tunneling driver

[   30.939857] init: syno-auth-check main process (6782) killed by TERM signal

[   31.113368] Monitor-Mwait will be used to enter C-1 state

[   31.113387] Monitor-Mwait will be used to enter C-3 state

[   31.113407] ACPI: acpi_idle registered with cpuidle

[   31.562346] fuse init (API version 7.22)

[   31.567380] dca service started, version 1.12.1

[   31.572057] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI

[   31.572061] e1000e: Copyright(c) 1999 - 2016 Intel Corporation.

[   31.584537] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.3

[   31.584540] Copyright (c) 2007-2015 Intel Corporation.

[   31.595099] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.4.6

[   31.595103] Copyright(c) 1999 - 2016 Intel Corporation.

[   31.595145] ixgbe unsupported_sfp_notify proc entry initialized

[   31.601177] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 1.5.19

[   31.601181] i40e: Copyright(c) 2013 - 2016 Intel Corporation.

[   31.629362] tn40xx low_mem_msg proc entry initialized

[   31.629367] tn40xx low_mem_counter proc entry initialized

[   31.629370] tn40xx debug_msg proc entry initialized

[   31.629372] tn40xx: Tehuti Network Driver, 0.3.6.12.3

[   31.644148] Loading modules backported from Linux version v3.18.1-0-g39ca484

[   31.644152] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c

[   31.662243] Compat-mlnx-ofed backport release: cd30181

[   31.662246] Backport based on mlnx_ofed/mlnx_rdma.git cd30181

[   31.662248] compat.git: mlnx_ofed/mlnx_rdma.git

[   31.918131] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.00 ($DateTime: 2015/07/28 00:13:30 $)

[   31.995323] bio: create slab <bio-1> at 1

[   31.995517] Btrfs loaded

[   32.038263] jme: JMicron JMC2XX ethernet driver version 1.0.8

[   32.047169] sky2: driver version 1.30

[   32.056180] pch_gbe: EG20T PCH Gigabit Ethernet Driver - version 1.01

[   32.065439] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.2.42

[   32.074647] QLogic/NetXen Network Driver v4.0.80

[   32.079461] Solarflare NET driver v3.2

[   32.084144] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI

[   32.084148] e1000: Copyright (c) 1999-2006 Intel Corporation.

[   32.088633] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de

[   32.093103] VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI

[   32.097660] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.3 (June 27, 2012)

[   32.098967] bnx2 0000:01:00.0 eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 36, node addr xx:xx:xx:xx:xx:xx

[   32.100213] bnx2 0000:01:00.1 eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 48, node addr xx:xx:xx:xx:xx:xx

[   32.101437] bnx2 0000:02:00.0 eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 32, node addr xx:xx:xx:xx:xx:xx

[   32.102651] bnx2 0000:02:00.1 eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 42, node addr xx:xx:xx:xx:xx:xx

[   32.112078] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012)

[   32.112087] bnx2 0000:01:00.0 eth0: Added CNIC device

[   32.112091] bnx2 0000:01:00.1 eth1: Added CNIC device

[   32.112095] bnx2 0000:02:00.0 eth2: Added CNIC device

[   32.112098] bnx2 0000:02:00.1 eth3: Added CNIC device

[   32.143109] usbcore: registered new interface driver ax88179_178a

[   32.147561] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0

[   32.147568] ACPI: Power Button [PWRF]

[   32.158964] Atheros(R) L2 Ethernet Driver - version 2.2.3

[   32.158968] Copyright (c) 2007 Atheros Corporation.

[   32.163523] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI

[   32.163526] e100: Copyright(c) 1999-2006 Intel Corporation

[   32.167874] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k

[   32.167877] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.

[   32.172344] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI

[   32.172348] ixgb: Copyright (c) 1999-2008 Intel Corporation.

[   32.176696] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.7.12-k

[   32.176700] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.

[   32.190026] usbcore: registered new interface driver rtl8150

[   32.194756] usbcore: registered new interface driver r8152

[   32.201942] usbcore: registered new interface driver asix

[   32.206293] usbcore: registered new interface driver plusb

[   32.256046] 2017-9-21 1:33:35 UTC

[   32.256051] synobios: load, major number 201

[   32.256055] Brand: Synology

[   32.256058] Model: DS-3615xs

[   32.256061] set group disks wakeup number to 4, spinup time deno 7

[   32.756733] synobios cpu_arch proc entry initialized

[   32.756737] synobios crypto_hw proc entry initialized

[   32.756740] synobios syno_platform proc entry initialized

[   32.887284] systemd-udevd[7787]: starting version 204

[   33.663908] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

[   33.692217] gre: GRE over IPv4 demultiplexor driver

[   33.737334] openvswitch: Open vSwitch switching datapath 2.4.1

[   35.314728] device ovs-system entered promiscuous mode

[   35.318804] device ovs_eth2 entered promiscuous mode

[   35.319012] device eth2 entered promiscuous mode

[   35.319205] device eth1 entered promiscuous mode

[   35.319391] device eth0 entered promiscuous mode

[   35.320915] device ovs_bond0 entered promiscuous mode

[   35.321102] device eth3 entered promiscuous mode

[   35.322655] device ovs_eth3 entered promiscuous mode

[   35.323709] openvswitch: syno_ovs_store_bonds:  is not a valid name of net_device

[   37.084392] device ovs_bond0 left promiscuous mode

[   37.094859] device eth1 left promiscuous mode

[   37.094997] device eth0 left promiscuous mode

[   37.104210] device ovs_bond0 entered promiscuous mode

[   37.123285] bnx2 0000:01:00.0: irq 81 for MSI/MSI-X

[   37.123294] bnx2 0000:01:00.0: irq 82 for MSI/MSI-X

[   37.123301] bnx2 0000:01:00.0: irq 83 for MSI/MSI-X

[   37.123308] bnx2 0000:01:00.0: irq 84 for MSI/MSI-X

[   37.123314] bnx2 0000:01:00.0: irq 85 for MSI/MSI-X

[   37.123320] bnx2 0000:01:00.0: irq 86 for MSI/MSI-X

[   37.123327] bnx2 0000:01:00.0: irq 87 for MSI/MSI-X

[   37.123334] bnx2 0000:01:00.0: irq 88 for MSI/MSI-X

[   37.123340] bnx2 0000:01:00.0: irq 89 for MSI/MSI-X

[   37.167283] bnx2 0000:01:00.0 eth0: using MSIX

[   37.167453] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[   37.187222] bnx2 0000:01:00.1: irq 90 for MSI/MSI-X

[   37.187232] bnx2 0000:01:00.1: irq 91 for MSI/MSI-X

[   37.187238] bnx2 0000:01:00.1: irq 92 for MSI/MSI-X

[   37.187245] bnx2 0000:01:00.1: irq 93 for MSI/MSI-X

[   37.187251] bnx2 0000:01:00.1: irq 94 for MSI/MSI-X

[   37.187257] bnx2 0000:01:00.1: irq 95 for MSI/MSI-X

[   37.187264] bnx2 0000:01:00.1: irq 96 for MSI/MSI-X

[   37.187270] bnx2 0000:01:00.1: irq 97 for MSI/MSI-X

[   37.187276] bnx2 0000:01:00.1: irq 98 for MSI/MSI-X

[   37.231308] bnx2 0000:01:00.1 eth1: using MSIX

[   37.231472] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready

[   37.242158] device eth0 entered promiscuous mode

[   37.242350] device eth1 entered promiscuous mode

[   37.242619] openvswitch: syno_ovs_store_bonds:  is not a valid name of net_device

[   37.314295] device ovs_eth2 left promiscuous mode

[   37.325908] device eth2 left promiscuous mode

[   37.326628] openvswitch: syno_ovs_store_bonds:  is not a valid name of net_device

[   37.342749] device ovs_eth2 entered promiscuous mode

[   37.343631] openvswitch: syno_ovs_store_bonds:  is not a valid name of net_device

[   37.368171] bnx2 0000:02:00.0: irq 99 for MSI/MSI-X

[   37.368180] bnx2 0000:02:00.0: irq 100 for MSI/MSI-X

[   37.368186] bnx2 0000:02:00.0: irq 101 for MSI/MSI-X

[   37.368193] bnx2 0000:02:00.0: irq 102 for MSI/MSI-X

[   37.368199] bnx2 0000:02:00.0: irq 103 for MSI/MSI-X

[   37.368206] bnx2 0000:02:00.0: irq 104 for MSI/MSI-X

[   37.368212] bnx2 0000:02:00.0: irq 105 for MSI/MSI-X

[   37.368218] bnx2 0000:02:00.0: irq 106 for MSI/MSI-X

[   37.368225] bnx2 0000:02:00.0: irq 107 for MSI/MSI-X

[   37.412297] bnx2 0000:02:00.0 eth2: using MSIX

[   37.412468] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready

[   37.419754] device eth2 entered promiscuous mode

[   37.420070] openvswitch: syno_ovs_store_bonds:  is not a valid name of net_device

[   37.466904] device eth3 left promiscuous mode

[   37.467030] device ovs_eth3 left promiscuous mode

[   37.483375] openvswitch: syno_ovs_store_bonds:  is not a valid name of net_device

[   37.499305] device ovs_eth3 entered promiscuous mode

[   37.500221] openvswitch: syno_ovs_store_bonds:  is not a valid name of net_device

[   37.524938] bnx2 0000:02:00.1: irq 108 for MSI/MSI-X

[   37.524948] bnx2 0000:02:00.1: irq 109 for MSI/MSI-X

[   37.524954] bnx2 0000:02:00.1: irq 110 for MSI/MSI-X

[   37.524961] bnx2 0000:02:00.1: irq 111 for MSI/MSI-X

[   37.524967] bnx2 0000:02:00.1: irq 112 for MSI/MSI-X

[   37.524974] bnx2 0000:02:00.1: irq 113 for MSI/MSI-X

[   37.524980] bnx2 0000:02:00.1: irq 114 for MSI/MSI-X

[   37.524986] bnx2 0000:02:00.1: irq 115 for MSI/MSI-X

[   37.524993] bnx2 0000:02:00.1: irq 116 for MSI/MSI-X

[   37.569364] bnx2 0000:02:00.1 eth3: using MSIX

[   37.569539] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready

[   37.576759] device eth3 entered promiscuous mode

[   37.577118] openvswitch: syno_ovs_store_bonds:  is not a valid name of net_device

[   39.227147] init: dhcp-client (ovs_bond0) main process (12661) killed by TERM signal

[   40.357693] bnx2 0000:01:00.0 eth0: NIC Copper Link is Up, 1000 Mbps full duplex

 

[   40.357782] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[   40.421727] bnx2 0000:01:00.1 eth1: NIC Copper Link is Up, 1000 Mbps full duplex

 

[   40.421832] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready

[   40.602797] bnx2 0000:02:00.0 eth2: NIC Copper Link is Up, 1000 Mbps full duplex

 

[   40.602891] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready

[   41.025935] md: md2 stopped.

[   41.026910] md: bind<sda3>

[   41.027712] md/raid1:md2: active with 1 out of 1 mirrors

[   41.027734] md2: detected capacity change from 0 to 115096354816

[   41.028050]  md2: unknown partition table

[   41.028989] md: md4 stopped.

[   41.030345] md: bind<sdi6>

[   41.030568] md: bind<sdh6>

[   41.031316] md/raid1:md4: active with 2 out of 2 mirrors

[   41.031338] md4: detected capacity change from 0 to 6001154981888

[   41.031628]  md4: unknown partition table

[   41.033033] md: md3 stopped.

[   41.042876] md: bind<sdf5>

[   41.043037] md: bind<sdg5>

[   41.043253] md: bind<sdh5>

[   41.043774] md: bind<sdi5>

[   41.043952] md: bind<sde5>

[   41.044690] md/raid:md3: device sde5 operational as raid disk 0

[   41.044694] md/raid:md3: device sdi5 operational as raid disk 4

[   41.044697] md/raid:md3: device sdh5 operational as raid disk 3

[   41.044698] md/raid:md3: device sdg5 operational as raid disk 2

[   41.044700] md/raid:md3: device sdf5 operational as raid disk 1

[   41.045788] md/raid:md3: allocated 5404kB

[   41.045817] md/raid:md3: raid level 5 active with 5 out of 5 devices, algorithm 2

[   41.045819] RAID conf printout:

[   41.045821]  --- level:5 rd:5 wd:5

[   41.045823]  disk 0, o:1, dev:sde5

[   41.045825]  disk 1, o:1, dev:sdf5

[   41.045826]  disk 2, o:1, dev:sdg5

[   41.045828]  disk 3, o:1, dev:sdh5

[   41.045830]  disk 4, o:1, dev:sdi5

[   41.045864] md3: detected capacity change from 0 to 7981807435776

[   41.054151]  md3: unknown partition table

[   41.312869] bio: create slab <bio-2> at 2

[   41.347057] bnx2 0000:02:00.1 eth3: NIC Copper Link is Up, 1000 Mbps full duplex

[   41.347064] , receive & transmit flow control ON

[   41.347151] IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready

[   41.492161] init: dhcp-client (ovs_bond0) main process (12939) killed by TERM signal

[   41.742283] init: dhcp-client (ovs_eth2) main process (13135) killed by TERM signal

[   42.202851] BTRFS: device label 2017.09.07-04:31:32 v8451 devid 1 transid 41090 /dev/vg1000/lv

[   42.203330] BTRFS info (device dm-0): disabling disk space caching

[   42.203337] BTRFS: has skinny extents

[   42.207532] BTRFS: device label 2017.09.07-04:22:33 v8451 devid 1 transid 40473 /dev/md2

[   42.208159] BTRFS info (device md2): disabling disk space caching

[   42.208166] BTRFS: has skinny extents

[   42.490261] init: dhcp-client (ovs_eth3) main process (13572) killed by TERM signal

[   48.359591] usbcore: registered new interface driver usblp

[   48.397589] usbcore: registered new interface driver usbhid

[   48.397594] usbhid: USB HID core driver

[   48.402626] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input1

[   48.402693] hid-generic 0003:0624:0248.0001: input: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0

[   48.402858] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input2

[   48.403087] hid-generic 0003:0624:0248.0002: input: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1

[   51.795399] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).

[   51.879742] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory

[   52.853014] loop: module loaded

[   54.809268] NFSD: starting 90-second grace period (net ffffffff81854380)

[   55.480608] iSCSI:target_core_rodsp_server.c:1017:rodsp_server_init RODSP server started, login_key(0024e84b993c).

[   55.500901] iSCSI:extent_pool.c:757:ep_init syno_extent_pool successfully initialized

[   55.517946] iSCSI:target_core_device.c:569:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288

[   55.518188] iSCSI:target_core_lunbackup.c:358:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully

[   55.591141] iSCSI:target_core_file.c:89:fd_attach_hba RODSP plugin for fileio is enabled.

[   55.591158] iSCSI:target_core_ep.c:831:ep_attach_hba RODSP plugin for epio is enabled.

[   55.591163] iSCSI:target_core_ep.c:838:ep_attach_hba ODX Token Manager is enabled.

[   56.127578] FAT-fs (sdw1): FAT: nls_disk load default table

 

[   56.135844] FAT-fs (sdw1): FAT: nls_io load default table

 

[   56.159435] FAT-fs (sdw1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

[   57.216186] FAT-fs (sdw2): FAT: nls_disk load default table

 

[   57.224506] FAT-fs (sdw2): FAT: nls_io load default table

 

[   57.248050] FAT-fs (sdw2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

[   58.432877] ata1.00: configured for UDMA/133

[   58.432885] ata1: EH complete

[   59.057566] ip_tables: (C) 2000-2006 Netfilter Core Team

[   59.626331] ata1.00: configured for UDMA/133

[   59.626339] ata1: EH complete

[   59.628147] ip6_tables: (C) 2000-2006 Netfilter Core Team

[   59.725905] aufs 3.10.x-20141110

[   59.758673] Bridge firewalling registered

[   61.995551] init: pkgctl-deluge pre-start process (23475) terminated with status 1

[   62.496202] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready

[   62.643872] device docker4aac6d6 entered promiscuous mode

[   62.643975] IPv6: ADDRCONF(NETDEV_UP): docker4aac6d6: link is not ready

[   62.643980] docker0: port 1(docker4aac6d6) entered forwarding state

[   62.643991] docker0: port 1(docker4aac6d6) entered forwarding state

[   62.644046] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready

[   62.900090] device docker288042b entered promiscuous mode

[   62.900179] IPv6: ADDRCONF(NETDEV_UP): docker288042b: link is not ready

[   62.900184] docker0: port 2(docker288042b) entered forwarding state

[   62.900195] docker0: port 2(docker288042b) entered forwarding state

[   63.387719] docker0: port 1(docker4aac6d6) entered disabled state

[   63.387794] docker0: port 2(docker288042b) entered disabled state

[   63.624496] cgroup: docker-runc (24429) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.

[   63.683223] docker0: port 2(docker288042b) entered disabled state

[   63.683429] device docker288042b left promiscuous mode

[   63.683433] docker0: port 2(docker288042b) entered disabled state

[   63.840132] IPv6: ADDRCONF(NETDEV_CHANGE): docker4aac6d6: link becomes ready

[   63.840175] docker0: port 1(docker4aac6d6) entered forwarding state

[   63.840189] docker0: port 1(docker4aac6d6) entered forwarding state

[   64.150630] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

[   78.871187] docker0: port 1(docker4aac6d6) entered forwarding state

Hide  

Share this post


Link to post
Share on other sites

hi,

 

to address the problem with the sata and pata modules i have compiled this modules from a vanilla 3.10.102 kernel, without the hardware present the modules load on a dsm 6.1.3 vm but that does'nt mean they will work at all, with the hardware present they might fail, oops or worse

modules in question:

sata_nv.ko
sata_sil.ko
sata_via.ko
sata_promise.ko
sata_sx4.ko

 

pata_amd.ko
pata_jmicron.ko
pata_marevell.ko
pata_via.ko
pata_sil680
pata_oldpiix.ko
pata_sch.ko
pata_mpiix.ko
pata_serverworks.ko

 

any volunteers (guinea pig's!!!) with test hardware without data on disk(s) (or willing to do a test with additional usb stick and empty disk on a running system)?

i would pm you a link with a extra.lzma containing the modules

 

Share this post


Link to post
Share on other sites

Hello,

I also have an issue with hpsa.ko, just sending what my symptoms are.

P420 card. With you v3.2, it can't detect any drives. With v3.0 it detects the drives, but it's unable to format them during initial install.

Cheers.

Share this post


Link to post
Share on other sites

well at least the driver from external source did not crash with the p420, but not detecting any drives doesnt help much

so its still the same and final, no hpsa support for 6.1 as long as anyone comes up with a solution (i cant see any atm)

it will be removed in the next version

at least the new tigon3 driver seem to work better then before

 

Share this post


Link to post
Share on other sites
On 9/11/2017 at 2:29 PM, IG-88 said:

hi,

 

contiuing from here

 

The newest version for testing is down below in the tread as its still work in progess and for testing (no "stable" version)"  

Hi

 

  V3 working well on Dell R710 on 3615xs Loader 1.02b,  Now would it be possible to to get Driver extension for the 3617xs Please....

Thanks in advance...

Share this post


Link to post
Share on other sites

I am using HP N54L with HP SmartArray P410.

 

I tried to upgrade from 5.2 to 6.1.3 with bootlader 1.02b and v.3 that download at the page1. 

That's good to detect the drive finally, but it prompts fail to format drive(error 35) as below.

image.png.04cd9b78958cecd4300638b4ab44e3a3.png

 

Hope can help.

 

Thanks

Share this post


Link to post
Share on other sites

did you read the thread here about hpsa.ko?

both option (kernel and external driver) do not work so no my statemant two posts above is still valid, no hp smart array driver support as long as nobody proofs that he has found a way (working driver)

 

only way might be to use esxi as base (dsm in vm)  and use raid5 volume over all disks as vmfs datastore (using hardware raid) and in dsm basic volume (vmdk file)

 

or keep disks (single disk as single raid volume in hp controller) and in esxi hand them over as rdm to dsm vm

in both scenarios you use the hp sa driver of esxi and dsm does only need existing drivers

 

Share this post


Link to post
Share on other sites
7 hours ago, IG-88 said:

did you read the thread here about hpsa.ko?

both option (kernel and external driver) do not work so no my statemant two posts above is still valid, no hp smart array driver support as long as nobody proofs that he has found a way (working driver)

 

only way might be to use esxi as base (dsm in vm)  and use raid5 volume over all disks as vmfs datastore (using hardware raid) and in dsm basic volume (vmdk file)

 

or keep disks (single disk as single raid volume in hp controller) and in esxi hand them over as rdm to dsm vm

in both scenarios you use the hp sa driver of esxi and dsm does only need existing drivers

 

Still have chance to make it work?

N54L just too weak for working with esxi...

Share this post


Link to post
Share on other sites

 

13 hours ago, Frankie said:

Still have chance to make it work?

N54L just too weak for working with esxi...

 

 

On 10/13/2017 at 7:04 PM, IG-88 said:

no hpsa support for 6.1 as long as anyone comes up with a solution (i cant see any atm)

no, like NO

if you want dsm 6.1 and esxi is no option then only a different controller is your way, used lsi's (reflashed to it-mode) or new marvell (syba brand?) seem to be used often, just search the forum there are some people who ditched there hp sa controllers to use dsm 6.1 (like cseb)

 

PS: maybe when dsm 6.2 next year comes out with kernel 4.4 and if the hp sa driver from that kernel works? but there are new protections in the dsm 6.2 beta, so might not happen, who knows

 

Share this post


Link to post
Share on other sites
On 30/09/2017 at 1:42 AM, IG-88 said:

hi,

 

to address the problem with the sata and pata modules i have compiled this modules from a vanilla 3.10.102 kernel, without the hardware present the modules load on a dsm 6.1.3 vm but that does'nt mean they will work at all, with the hardware present they might fail, oops or worse

modules in question:

sata_nv.ko
sata_sil.ko
sata_via.ko
sata_promise.ko
sata_sx4.ko

 

pata_amd.ko
pata_jmicron.ko
pata_marevell.ko
pata_via.ko
pata_sil680
pata_oldpiix.ko
pata_sch.ko
pata_mpiix.ko
pata_serverworks.ko

 

any volunteers (guinea pig's!!!) with test hardware without data on disk(s) (or willing to do a test with additional usb stick and empty disk on a running system)?

i would pm you a link with a extra.lzma containing the modules

 

where can i download this build of extra.lzma ?

Share this post


Link to post
Share on other sites
23 minutes ago, agent47SG1 said:

where can i download this build of extra.lzma ?

 

as the outcome is "open" it could be dangerous to let it lay around, i will send you the link and you can report back what happend

Share this post


Link to post
Share on other sites

just to report, v3 drivers in the first post worked well for my nvidia ION chipset atom motherboard.

Share this post


Link to post
Share on other sites
On 10/23/2017 at 12:15 AM, novrain said:

just to report, v3 drivers in the first post worked well for my nvidia ION chipset atom motherboard.

i guess its about nic working and if its disk then its AHCI (native like nForce MCP65 , MCP67, MCP68, MCP72, MCP73, MCP77, MCP78, MCP79, MCP7A, MCP82, MCP89 and later) as the sata_nv driver does not work

you can check with

lsmod -k

 

Share this post


Link to post
Share on other sites
On ‎2017‎年‎10‎月‎21‎日 at 4:56 AM, IG-88 said:

 

as the outcome is "open" it could be dangerous to let it lay around, i will send you the link and you can report back what happend

Can you send me the link? I want to test sata_sil

Share this post


Link to post
Share on other sites

@IG-88

Using a Dell PowerEdge 2900 III. Has Dual embedded Broadcom NetXtreme II 5708 Gigabit Ethernet NICs. Using Jun 1.02b loader the boot seems ok but cannot find NAS with http://find.synology.com or the downloadable synology assistant. Furthermore I don't see those NIC's MACs on network when doing a scan. And, they don't get IPs from DHCP server. Guessing the NICs are not compatible with this loader. Do any of your ramdisk mods or other mods support this NIC maybe? I couldn't find anything explicitly saying so.

Share this post


Link to post
Share on other sites

did you try to insert my extra.lzma (v3.2)? you dont write that you have tryed

atm you will have to serch the web what kernel module is needed in linux for a certain hardware and compare with the files in the extra.lzma to be shure

i will extend the doc for my extra.lzma with this information next time to make it easyer

there are missing firmware files in jun's loader as tere are 2 major different versions of cards going under the bnx2.ko driver

for other people that was working (i did not replaced the driver jun provides with his loader - no need for now)

 

in my descrition on the beging of this thread its this

firmware

bnx2/bnx2-mips-06-6.2.3.fw

bnx2/bnx2-mips-09-6.2.1b.fw

 

source where we discussed it:

 

  • Like 1

Share this post


Link to post
Share on other sites

just a quick note

two people tested the vanilla kernel driver in dsm 6.1 with real hardware controller and in both cases it did not work

in one case i got a log and the driver just crashed and oops'ed

 

so no pata_* and sata_* drivers for now as long as someone with coder skills looks into the synology modded kernel 3.10.102 #15152 and delivers a diff file to fix it

 

log  

[Wed Oct 25 22:16:03 2017] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[Wed Oct 25 22:16:03 2017] RocketRAID 3xxx/4xxx Controller driver v1.8
[Wed Oct 25 22:16:03 2017] isci: Intel(R) C600 SAS Controller Driver - version 1.1.0
[Wed Oct 25 22:16:03 2017] r750: module license 'Proprietary' taints kernel.
[Wed Oct 25 22:16:03 2017] Disabling lock debugging due to kernel taint
[Wed Oct 25 22:16:03 2017] r750:Rocket 750 controller driver v1.2.10
[Wed Oct 25 22:16:03 2017] sata_sil 0000:03:05.0: version 2.4
[Wed Oct 25 22:16:03 2017] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
[Wed Oct 25 22:16:03 2017] IP: [<ffffffffa02cbae0>] sil_init_one+0x1c0/0x2ea [sata_sil]
[Wed Oct 25 22:16:03 2017] PGD 7bfa0067 PUD 76255067 PMD 0
[Wed Oct 25 22:16:03 2017] Oops: 0002 [#1] SMP

...

Hide  

Share this post


Link to post
Share on other sites
22 hours ago, IG-88 said:

did you try to insert my extra.lzma (v3.2)? you dont write that you have tryed

 

 

I managed to get it to work with this version 3.2, I don't know why I thought I had an old version (3, maybe) and couldn't find 3.2. The system can use the cards now, but at first one port was only connecting at 100M speed but couldn't do 1000M. Since the other port was doing 1000M figured it can't be a driver issue and after fiddling with it and rebooting a bunch it started working stably at 1000M on both ports.

 

All seems good now! Thank you.

 

-C

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.