XPEnology DS3612xs DSM 4.3 build 3810++ (repack v1.0)


Recommended Posts

Thnx, here the same now but has modded the Bios for it while on DSM4,2 it also worked without modding?

 

How many Drives you use? DSM isn't recognize my fifth drive anymore (In DVD-bay)

Leon

I got 5 disks (each 4TB), listed as Disk 1, 2, 3, 4 and 6 in System Information under Storage.

4 disks in the "hot-plug able" bays and one disk in the DVD bay. The disk in the DVD bay is connected to the internal SATA port.

Link to post
Share on other sites
So I currently have a HP N54L up and running with DSM 4.2.

Now I see that you guys have made 4.3 possible, can I install it on my N54L without a problem? How do I go ahead and perform the upgrade? Will all my files and settings remain intact?

 

What exactly do I gain by upgrading to 4.3?

You haven't read this thread from the beginning, have you? Please do.

You'll see that ALL your settings will be lost, but your data should be intact (mine was).

The upgrade procedure is more or less the same as if you install from scratch.

 

Whats new from 4.2 to 4.3: http://www.synology.com/en-global/releaseNote/model/DS3612xs

Link to post
Share on other sites

In 4.2 I could use the debug tool command (syno_hibernate_debug_tool --enable 10) to track when my HDDs woke up from hibernation by looking in the /var/log/messages file. In 4.3, that tool doesn't seem to show the HDDs ever waking up, while the hibernation logs (both in the system logs accessible through the web interface and in the /var/log/scemd.log file) show the HDDs waking up at various times. Does the hibernation debug tool no longer work with 4.3? Thanks in advance.

Link to post
Share on other sites

I have an Gigabyte G33-DS2R and the 4x ICH9R Sata Ports works fine with 2x 1.5TB Seagate HDDs.

 

Problem, I have 4x 500GB Sata HDD and when I connect to the Sata Ports:

 

ICH9R: 4x 500GB HDD

JMicron: 2x 1,5TB HDD

 

I boot and it works fine. I create the two volumes and after 10min, I cant ping the XPEnology. The System is up, but it doesnt recognize.

I can reset, power off, power on and max 10min the system is up.

 

With only 2x 1,5TB it works fine.

 

Hope somebody help.

 

My Promise SuperTrak Raid Controller doesnt work.

Link to post
Share on other sites

Trying to install xpenology 4.3 on an HP gen8 microserver, on the internal SD card, no HDD installed.

The image boots fine, i can see it detects the SD card, but cannot install. The Web Assistant says "No Hard Disk found" and the DS assistant says Server Error (Error code:38).

Any ideas?

Thanks,

Link to post
Share on other sites
Trying to install xpenology 4.3 on an HP gen8 microserver, on the internal SD card, no HDD installed.

The image boots fine, i can see it detects the SD card, but cannot install. The Web Assistant says "No Hard Disk found" and the DS assistant says Server Error (Error code:38).

Any ideas?

Thanks,

Duh!

You should wait for the next DSM release. Its promised to be able to detect disconnected drives, sitting on the shelf, or even ordered online and shipped, but not yet delivered and install on them. :lol:

But if you cannot wait that long, RTFM.

Link to post
Share on other sites
Got that part, i booted from an external USB thumbdrive, but i thought the OS can be loaded on the internal SD card (like ESXi for example).

If that's not possible, i'll have to find some HDDs.

Thanks!

 

How do you want to use XPE if you don't have any HDDs connected? Seriously, it is a NAS - Network Attached Storage - OS, not a simple Linux install! It is DESIGNED for handling hard drives and volumes.

Besides, as it was said, it installs to every hard drive that is detected as an internal one, the following way:

1. Synology erases the drive completely

2. The drive gets initialized the following way:

|MBR|Synoboot partition|Partition for system, 2GB|Space ready to be added to a volume|

3. The system partition is then added to a RAID array, making it completely secure (so no matter how many hard drives you remove, if one original drive stays in, it can still boot).

 

If you want to have a system running off of an SD card, try any kind of Linux distro. Debian, CentOS, OpenSUSE, all have the functionality of Synology, but are more open and flexible.

Link to post
Share on other sites
This is not an official synology product, it's only design for testing purpose not for production.

 

What's new ?

- AMD CPU support

- Add / update Network / SATA / SCSI / SAS / USB drivers

- USB OHCI support

- SSH access enabled by default

- DM-Mirror support for LVM2 physical relocation (include dm-log, dm-region-hash and dm-mirror modules. thanks totalnas)

 

Thank to all people who help the community to make possible to build 4.3 version (neXus, VeNoM, Vortex, guys from nas1.cn sorry if I forgot some of you)

Big thank for k3dt's work (synobios and his fix).

 

 

Version 1.0 is now available : http://xpenology.trantor.be/ (please click on ad to help me with this project)

 

 

How to install XPEnology

Convert .img file to .vdi (virtualbox)

Edit serial number and MAC address for your XPEnology

 

 

:arrow: For unsupported hardware please post your driver request here

 

 

See changelog for full list of fix and supported hardware:

 

CHANGELOG

v1.0 (18/11/13)


NETWORK
-------

Replace the REALTEK r8169 driver with the r8168 v8.037 (RTL8111x/RTL8168x/RTL8411x)
Add REALTEK r8101 driver v1.024.00 (RTL8100x/RTL8101x/RTL8102x/RTL8103x/RTL8401x/RTL8105x/RTL8106x)
Update INTEL e1000e driver to v2.5.4 (support I217x and I218x chip)
Update INTEL igb driver to v5.0.6 (support I340 and I350 chip)
Add ATHEROS alx driver (Qualcomm Atheros AR816x/AR817x support)
Update BROADCOM tg3 driver to v3.133 (with PHY built-in the kernel)

AMD 8111 
AMD PCnet32
Atheros L2, L1
Atheros L1C (ATL1E)
Atheros L1E (ATL1E)
AMD 8111 (AMD8111_ETH)
D-LINK DL2000/TC902x-based Gigabit Ethernet (DL2K)
Broadcom 440x/47xx, NetExtremeII, CNIC
Intel PRO/100+, PRO/1000, 82575/82576, 82586/82593/82596
JMicron JMC250 (jme)
Marvell Yukon
Marvell Yukon 2 (sky2) : 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
Nvidia nForce
Realtek 8139,8129,8130
VIA Rhine (via-rhine) : (Rhine-I (VT86C100A), Rhine-II (VT6102), or Rhine-III (VT6105)
VMware vmxnet3

USB
---

USB_OHCI_HCD (thanks totalnas for the tip)


SATA
----

Intel ESB, ICH, PIIX3, PIIX4
Marvell
NVidia
Promise SATA TX2/TX4
Silicon Image 3124/3132
SiS 964/965/966/180
ULi Electronics SATA
VIA SATA support (SATA_VIA)



SCSI
----

Fusion MPT device support
3ware 5/6/7/8xxx ATA-RAID
3ware 9xxx SATA-RAID
3ware 97xx SAS/SATA-RAID
HP Smart Array SCSI
ACARD SCSI
Adaptec AACRAID 
Adaptec AIC7xxx (New Driver)
Adaptec AIC79xx U320
Adaptec AIC94xx SAS/SATA
Marvell 88SE64XX/88SE94XX SAS/SATA
AdvanSys SCSI
ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID
LSI Logic New Generation RAID Device (MEGARAID_NEWGEN)
LSI Logic MegaRAID SAS RAID
LSI MPT Fusion SAS 2.0 (updated to v16)
HighPoint RocketRAID 3xxx/4xxx Controller
IBM ServeRAID
Intel/ICP RAID
Intel(R) C600 Series Chipset SAS
IBM Power Linux RAID
Promise SuperTrak EX Series
Qlogic QLA 1240/1x80/1x160 SCSI
VMware PVSCSI driver

 

TODO LIST:

- Add virtualization options to standard build

- Make special build for ESXi (yes I know you want this ^^)

 

Hi Trantor,

I have read almost the whole board but no one seems to use SHA? Since you are one of the best Xpenology specialist as far as i can see, i ask you directly if i may.

Done everything as it supposed to (in synology SHA manual) but everytime when i connect the heartbeatcable both (N54L) become inaccessable.

Both systems have the same (intel pro1000) Nic's, same harddisks on same slots,Ipv6 is disabled just like DHCP and PPPoe is not connected.(cannot find where to disable that)......... Do you have any suggestions? (Of course i use different serial numbers and the real hardware macaddresses of al the 4 NIC's.(edited in the vender file)

 

Best regards,

Leon

Link to post
Share on other sites
Trantor, can you please add support for Shutdown from the Power button in the next release?

 

 

f /proc/acpi/event is not present then the kernel has no acpi support enabled. I think the kernel needs to be recompiled with:

 

CONFIG_ACPI=y

 

viewtopic.php?f=2&t=889&start=30

 

Thank you!

 

 

+1

 

+1 ..... Is there also the possibility for restart ????

Link to post
Share on other sites
It is working ...

 

- USB ports

- 6 Disk

- UPS

- WOL

 

I dont need nothing more :smile:

 

https://dl.dropboxusercontent.com/u/34829066/Synology/Slike/system%20information.jpg

 

https://dl.dropboxusercontent.com/u/34829066/Synology/Slike/volume1.jpg

 

https://dl.dropboxusercontent.com/u/34829066/Synology/Slike/UPS.jpg

 

 

Donation follows (under - dejan.v)

 

TNX again for all good work on this release.

 

error 404 those pics dont exist

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.