SandLake Posted August 16, 2017 Share #1 Posted August 16, 2017 Hi I am currently running a homebuilt server with an AMD A6 processor and have had DSM 6.0.2-8451 (previously DSM5) running for quite some time. I only realised after going down the AMD route that I would have been better using Intel but too late. The current setup works fine. I see that the newer DSM releases (or the bootloader associated with the newer releases) do not support AMD which I can live with (as I don't really understand what that is all about). My question is do I need to do something about it? Can I just sit here happily on 6.0.2? Is it likely that AMD will become supported again in the future? Quote Link to comment Share on other sites More sharing options...
sbv3000 Posted August 17, 2017 Share #2 Posted August 17, 2017 I think that most of the features of 6.0 and 6.1 are the same unless you are looking at high end features or different processor types and synology will do updates to 6.0 as needed so you should be ok. Quote Link to comment Share on other sites More sharing options...
Dfds Posted August 17, 2017 Share #3 Posted August 17, 2017 In answer to your question, yes you can happily stay on 6.0.2 if it's working for you & you don't need any of the features in 6.1. I have 2 HPN54L (AMD) servers both of which were running 5.2 very happily until recently when I upgraded them both to 6.1. Quote Link to comment Share on other sites More sharing options...
SandLake Posted August 17, 2017 Author Share #4 Posted August 17, 2017 I don't have a fallback position if anything goes wrong so I am a little apprehensive, my setup is working fine as it is so I'll prob stay on 6.0.2 for the meantime - Thanks Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted August 22, 2017 Share #5 Posted August 22, 2017 Have a read at the OP of Jun's topic. I added a PM he sent me about AMD. AMD is not entirely incompatible but it seems to be a hit or miss for some so as advised by others above yes it is best you stay on DSM 6.0.2 for now. You can always try the latest loader 1.02b and DSM 6.1.3 on a test drive first see how that works for you but overall I think you are not missing much other than small features and perhaps some security updates. Quote Link to comment Share on other sites More sharing options...
SandLake Posted August 22, 2017 Author Share #6 Posted August 22, 2017 I have decided to migrate to Intel. As I said I have a home built (Micro-ATX) server and I am looking at options for a cheap CPU/Motherboard/Memory combo to rebuild it with. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.