synogeek

HP N54L - DSM 6.1 onwards

Recommended Posts

I've been running it full time for two week and my uptime is nearly 15 days not had a single crash or issue it's had a moderate load at times.

 

Only issue I have experience is a slight disconnect from network I'm logging data to see if it's an issue with the firmware files for nic or a network issue my end I believe it's an issue my end with router but I will confirm after more testing.

Share this post


Link to post
Share on other sites

can this bootloaer updated to 1.02b ?

 

i'll try it this weekend : JunsMod102a-test-NICadd

 

Thanks

  • Like 1

Share this post


Link to post
Share on other sites
can this bootloaer updated to 1.02b ?
 
i'll try it this weekend : JunsMod102a-test-NICadd
 
Thanks

It would be great to have an N54L 1.02b boot loader.


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

install runs fine i selected keep data , my network card is blinking , the device rebooted 10 minutes ago, but can't find it on the network

Share this post


Link to post
Share on other sites

mm still no go i can boot with network withe drives un plugged :/

Share this post


Link to post
Share on other sites

installing on a new drive works :P

whant can i do to see my originial drive and be able to boot with network support with the old drives ?

 

looks like something is bloking the network to start, is there a way to ignore this and force the system to reinstall ?

Edited by ygor

Share this post


Link to post
Share on other sites
1 hour ago, ygor said:

installing on a new drive works :P

whant can i do to see my originial drive and be able to boot with network support with the old drives ?

 

looks like something is bloking the network to start, is there a way to ignore this and force the system to reinstall ?

 

 

Your options are to either install on a clean formated hdd and if you need files off other hdd load it up in a Linux live cd and copy over.

 

I will update to version 1.02b over weekend 

  • Like 2

Share this post


Link to post
Share on other sites

it is a shr btrfs will it work ?

 

Or do i have to make some mdam command ?

Share this post


Link to post
Share on other sites

cool that works nicely, i will copy these data to other drives  , looks good thanks for the tip :smile:

 

Share this post


Link to post
Share on other sites

install madm 

#mdadm --assemble --scan

 

run disks app in ubuntu live, mount the 5Tb SHR/BTRFS volume  :smile: 

All good,

instead of copy i could change something or delete some syno file to restart the setup without moving all data ?

Share this post


Link to post
Share on other sites

Not sure to understand.
@khile : You compile yourself a new kernel with AMD support ?

And use the loader 1.02b ? (or 1.02a ?)

 


I believe jun fix a bug in last version, during the migration.

 

I will test on  my N40L.
 

Edited by ordimans

Share this post


Link to post
Share on other sites

Tested on N40L.
Disabled C1E support in bios. (What is exactly ? )

 

find.synology.com >> not found DSM.
Synology Assistant, found it !!

 

 

Installation in progress for 15047. Next update it's OK.
It's possible to use 3617xs in change the grub.cfg ??

 

SSD on Sata port is not detected...

 

 

Edited by ordimans

Share this post


Link to post
Share on other sites

Great!

Work fine on N54L

Just disable C1 in bios, and in menu force install create new installation of DSM DS3615xs 6.1.2.15132

Worked fine. So, when i trying to upgrade DSM DS3615xs 6.1.0.15047 to DSM DS3615xs 6.1.2.15132 - NAS lost network (cant find him on network.)

Share this post


Link to post
Share on other sites

Did you change PID/VID in grub.cfg ? No for myself... and it worked in force mode.
 

 

Some problem for me with hardware support :


-Cannot switch to MTU 9000 on RTL8111 added.

-additional Sata on Motherboard are not supported ??? (eSata port not tested)


 

EDIT:

-UPS support is OK, APC is connected :

Quote


2017-07-09T13:23:06+0200 /usr/share/cmdvartab not found - disabling descriptions
2017-07-09T13:23:07+0200 /usr/syno/etc/rc.sysv/ups-usb.sh start invoked.
2017-07-09T13:24:52+0200 System is not in ups safe mode
2017-07-09T13:24:52+0200 Stop UPS Daemon
2017-07-09T13:24:52+0200 Network UPS Tools - UPS driver controller DSM6-1-14872-161104
2017-07-09T13:25:01+0200 Stop UPS timeout, Force stop UPS
2017-07-09T13:25:01+0200 Network UPS Tools - UPS driver controller DSM6-1-14872-161104
2017-07-09T13:25:01+0200 Can't open /var/state/ups/usbhid-ups-auto.pid: No such file or directory
2017-07-09T13:25:04+0200 /usr/syno/etc/rc.sysv/ups-usb.sh stop invoked.
2017-07-09T13:25:04+0200 Network UPS Tools - UPS driver controller DSM6-1-14872-161104
2017-07-09T13:25:04+0200 Network UPS Tools - Generic HID driver 0.38 (DSM6-1-14872-161104)
2017-07-09T13:25:04+0200 USB communication driver 0.32
2017-07-09T13:25:05+0200 Using subdriver: APC HID 0.95
2017-07-09T13:25:05+0200 The UPS is connected. driver=[usbhid-ups]
2017-07-09T13:25:05+0200 Start UPS Server
2017-07-09T13:25:05+0200 Network UPS Tools upsd DSM6-1-14872-161104
fopen /var/state/ups/upsd.pid: No such file or directory
2017-07-09T13:25:05+0200 listening on ::1 port 3493
2017-07-09T13:25:05+0200 listening on 127.0.0.1 port 3493
2017-07-09T13:25:05+0200 listening on fe80::a2b3:ccff:fedf:1c9f port 3493
2017-07-09T13:25:05+0200 listening on 192.168.0.151 port 3493
2017-07-09T13:25:05+0200 listening on fe80::211:32ff:fe2c:a785 port 3493
2017-07-09T13:25:05+0200 listening on 192.168.0.104 port 3493
2017-07-09T13:25:05+0200 Connected to UPS [ups]: usbhid-ups-ups
2017-07-09T13:25:05+0200 /usr/share/cmdvartab not found - disabling descriptions
2017-07-09T13:25:06+0200 /usr/syno/etc/rc.sysv/ups-usb.sh start invoked.

 

 

Edited by ordimans

Share this post


Link to post
Share on other sites
2 hours ago, ordimans said:
Quote

 

Tested on N40L.
Disabled C1E support in bios. (What is exactly ? )

 

find.synology.com >> not found DSM.
Synology Assistant, found it !!

 

 

Installation in progress for 15047. Next update it's OK.
It's possible to use 3617xs in change the grub.cfg ??

 

SSD on Sata port is not detected...

 

 

 

 

 

 


It automatically reduces your CPU multiplier (slows CPU down) when the computer isn't doing much. It's a way to save power.

Edited by Toetje583

Share this post


Link to post
Share on other sites
1 hour ago, ordimans said:

Did you change PID/VID in grub.cfg ? No for myself... and it worked in force mode.
 

 

Some problem for me with hardware support :


-Cannot switch to MTU 9000 on RTL8111 added.

-additional Sata on Motherboard are not supported ??? (eSata port not tested)


 

EDIT:

-UPS support is OK, APC is connected :

 

By any change they are controlled with a other controller, perhaps the additional sata needs other drivers?

Edited by Toetje583

Share this post


Link to post
Share on other sites

Hum.
Not sure if it worked with 1.01 loader and 6.0.2... I need to check...
How can i be sure what is exactly the chipset use ? It's N40L.

EDIT :

Quote


0001:07:00.0 Non-VGA unclassified device: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller (rev ff) (prog-if ff)
        !!! Unknown header type 7f

 


Last thing, about MTU 9000, it's a problem with RTL8111B, 7200 is the max...

I UPGRADED with success.
Click on update by DSM and choose force reinstall during the reboot. I choose install last version during assistant :

It's worked :

 

3c752ac64b80c4238192a625dc505a2516f9ec21

 

Edited by ordimans

Share this post


Link to post
Share on other sites

Fixed for eSata. Just need to change setting in bios. (in Southbrigde configuration).

 

Share this post


Link to post
Share on other sites

New problem, cannot install package.
The loading is infinite...

 

EDIT:

Quote


2017-07-09T16:56:42+02:00 Syno_1 synoscgi_SYNO.Core.Package.Server_1_list[15282]: pkgcurltool.cpp:440 Failed to download https://payment.synology.com/api/getPackageList.php, code=28, err=Error
2017-07-09T16:56:43+02:00 Syno_1 synoscgi_SYNO.Core.Package.Server_1_list[15307]: pkgcurltool.cpp:262 Failed to curl perform, code=28, err=Error
2017-07-09T16:56:44+02:00 Syno_1 synoscgi_SYNO.Core.Package.Server_1_list[15307]: pkgcurltool.cpp:440 Failed to download https://payment.synology.com/api/getPackageList.php, code=28, err=Error


2017-07-09T17:04:33+02:00 Syno_1 synoscgi_SYNO.Core.Package.Server_1_list[18516]: pkgcurltool.cpp:262 Failed to curl perform, code=28, err=Error
2017-07-09T17:04:34+02:00 Syno_1 synoscgi_SYNO.Core.Package.Server_1_list[18533]: pkgcurltool.cpp:262 Failed to curl perform, code=28, err=Error

 

 

 

Edited by ordimans

Share this post


Link to post
Share on other sites
2 hours ago, ordimans said:

Fixed for eSata. Just need to change setting in bios. (in Southbrigde configuration).

 

Can you say the details?

Share this post


Link to post
Share on other sites
10 hours ago, ordimans said:

Yes of course.

You need custom bios for N40L/N54L , to have this menu :
Chipset >> Southbrigde configuration >> SB SATA Configuration

 

Sata IDE Combined Mode ==> DISABLED
Sata ESP on all port ==> Enabled

 

Source :

https://homeservershow.com/forums/topic/3397-modified-bios-for-microserver-n40l-enables-hidden-features/

 

 

Thank you

i'll try it this night

 

Share this post


Link to post
Share on other sites

I have a problem with package center, it's impossible to get the list.... Cannot install package.
Don't know why,....
Synology forum are in timeout....

 

Try others DNS (google or opendns) it's same...

 

IP blacklisted ?!?!?
 

 

 

Edited by ordimans

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.