plugovich Posted June 28, 2017 Share #851 Posted June 28, 2017 Hi. Is it possible to boot over the network using pxe? Thanks Quote Link to comment Share on other sites More sharing options...
xpenology5User Posted June 28, 2017 Share #852 Posted June 28, 2017 I've read through this thread (as well as the "DSM 6.x.x Loader" thread) but must have missed something. My desktop is an HP dc7900 with an Intel Core 2 Duo E8400 I've tried synoboot 1.02b for all 3 versions (ds916 / ds3615 / ds3617) and it doesn't boot. It goes straight to the next step in the boot order which is the network boot. The vid/pid/sn/mac was set for each attempt. The same configuration works fine with XPEnoboot_DS3615xs_5.2-5644.4.img thanks Quote Link to comment Share on other sites More sharing options...
MDGuy Posted June 29, 2017 Share #853 Posted June 29, 2017 I followed all of the directions and everything was going well until I got to Step 9. I selected Migrate and now it seems to be in a Recover loop. I suspect I should have selected manual install after Migrate. At no point was I prompted to select the pat file. Please help. Thanks. Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted June 29, 2017 Author Share #854 Posted June 29, 2017 10 hours ago, plugovich said: Hi. Is it possible to boot over the network using pxe? Thanks Not that I know. Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted June 29, 2017 Author Share #855 Posted June 29, 2017 5 hours ago, xpenology5User said: It goes straight to the next step in the boot order which is the network boot. What do you mean? Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted June 29, 2017 Author Share #856 Posted June 29, 2017 43 minutes ago, MDGuy said: I suspect I should have selected manual install after Migrate. What do you mean? If you let the installer go through without providing manually the 6.0.2 PAT file then you might have screwed things up as Synology possibly pushed the lasted 6.0.x version (6.0.3) instead of the 6.0.2 required. I clearly mentionned that one needs to provide the PAT file manually and if you got the migration stage then it means you missed it because that's where it is supposed to be just right after that step. If you are on an Intel based CPU machine then you could try using v1.02b and installing 6.1.2 but I can't guarantee it will work. Another possibility is to downgrade back to 6.0.2 or even 5.2 by modifying the required files and then installing again. See: https://xpenology.com/forum/topic/5442-downgrade-from-dsm-60/ and See: https://xpenology.com/forum/topic/7004-tutorial-how-to-access-dsms-data-amp-system-partitions/ Before doing anything you could simply double check if what I am saying is correct by using the second link to access the system partition and check the VERSION file located under \etc.defaults\VERSION to see what version of DSM is installed, then proceed accordingly. If you need to reinstall don't forget to re-burn the loader image onto the USB flash drive as during the upgrade process the kernel was replaced in the loader by the one from the PAT file. Quote Link to comment Share on other sites More sharing options...
MDGuy Posted June 29, 2017 Share #857 Posted June 29, 2017 Thanks for the reply. It wasn't clear to me to click the manual install link. I thought I was going to be prompted for the pat file once I selected Migrate. That was my bad. I am going to retrace my steps and try 1.02b, which so far seems to be starting to work. I have a few more steps to get through. I will let you know how it turns out. I appreciate the help. Quote Link to comment Share on other sites More sharing options...
mariad Posted June 29, 2017 Share #858 Posted June 29, 2017 Newbie issues, i just cannot recall how many times i have to come here for help. Glad you asked the query. Quote Link to comment Share on other sites More sharing options...
jarzyn Posted June 29, 2017 Share #859 Posted June 29, 2017 On 27.06.2017 at 4:38 AM, Polanskiman said: AMD Athlon(tm) 64 X2 Dual Core Processor 4200 2.20GHz Gigabyte GA-M61SME-S2L NIC NVIDIA nForce In view of your hardware you need the forcedeth.ko module. The custom ramdisk that I provided contains it but it seem the custom ramdisk is posing some problems to some people. Try this one instead which contains only the forcedeth module in addition to the modules provided by Jun: https://mega.nz/#!KcxTxQhJ!FYOSzesxdUjPlynO4YDvSu4LKfFkFk9eBvkUD9AGS04 Please report back. Thank you Polanskiman for you hard work. Unfortunately no luck with this drivers ;/ I would be gratefull for further assistance. Quote Link to comment Share on other sites More sharing options...
xpenology5User Posted June 29, 2017 Share #860 Posted June 29, 2017 21 hours ago, Polanskiman said: What do you mean? My Boot order is --USB thumb drive --Network boot. It skips the USB Boot and goes to the Network boot which means it's not reading the thumb drive. If I use the same thumb drive on another machine it boot fine. When I put the 5.x version on the thumb drive, the machine boots fine Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted June 30, 2017 Author Share #861 Posted June 30, 2017 My Boot order is --USB thumb drive --Network boot. It skips the USB Boot and goes to the Network boot which means it's not reading the thumb drive. If I use the same thumb drive on another machine it boot fine. When I put the 5.x version on the thumb drive, the machine boots fineTry booting in legacy instead of efi. The loader is hybrid so it can boot in both modes. Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted June 30, 2017 Author Share #862 Posted June 30, 2017 Thank you Polanskiman for you hard work. Unfortunately no luck with this drivers ;/ I would be gratefull for further assistance.You are chosing the AMD line in the grub menu right? Quote Link to comment Share on other sites More sharing options...
jarzyn Posted June 30, 2017 Share #863 Posted June 30, 2017 13 hours ago, Polanskiman said: You are chosing the AMD line in the grub menu right? Of course I am That is why I am looking for any method to see what is going on underneath if system fails to load, or crush at some point. Quote Link to comment Share on other sites More sharing options...
lilmonkey Posted June 30, 2017 Share #864 Posted June 30, 2017 Newbie alert.. Just setup on HP Microserver 1620, celeron, 10Gb ram, 16Tb as Raid5 (12Tb), with 256Gb SSD.. Installed XPEnoboot_DS3615xs_5.2-5644.5 and the DSM_DS3615xs_5644.. Everythig working fine for local access.. I cannot access via external internet (not too bothered about that). However, when i try to download and install Jun's 1.01 or 1.02b installers to a USB stick (using Win32DiskImager) i get errors during the write.. And multipel partitions are created on the flash drive.. If I go back to XPEnoboot_DS3615xs_5.2-5644.5 then no errors and just the 1 partition.. I want to upgrade to latest possible DSM, but am i missing something? Quote Link to comment Share on other sites More sharing options...
synogeek Posted June 30, 2017 Share #865 Posted June 30, 2017 1 hour ago, lilmonkey said: Newbie alert.. Just setup on HP Microserver 1620, celeron, 10Gb ram, 16Tb as Raid5 (12Tb), with 256Gb SSD.. Installed XPEnoboot_DS3615xs_5.2-5644.5 and the DSM_DS3615xs_5644.. Everythig working fine for local access.. I cannot access via external internet (not too bothered about that). However, when i try to download and install Jun's 1.01 or 1.02b installers to a USB stick (using Win32DiskImager) i get errors during the write.. And multipel partitions are created on the flash drive.. If I go back to XPEnoboot_DS3615xs_5.2-5644.5 then no errors and just the 1 partition.. I want to upgrade to latest possible DSM, but am i missing something? would highly suggest you open a new thread about your issue.its easier for others to help that way. Instead of this thread getting many pages long. Also did you check your PVID etc? soemtimes bad memory stick can also cause issues, do you have spares to test? Quote Link to comment Share on other sites More sharing options...
hannibal1969 Posted June 30, 2017 Share #866 Posted June 30, 2017 (edited) Sorry I digged the whole forum but I couldn't find a clear answer how to do the trick to move forward from DSM 6.0.2. I'm currently running stable at DSM 6.0.2-8451 Update 11 on DS3615XS bare metal. I was thinking to just create a new usb boot stick with loader 1.02b adjust the grub.cfg and boot my current DSM 6.0.2-8451 Update 11 with the new 1.02b loader. From there I like to upgrade just from the control panel. Can I do it this way? Thanks! Edited June 30, 2017 by hannibal1969 Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted July 1, 2017 Author Share #867 Posted July 1, 2017 16 hours ago, lilmonkey said: Newbie alert.. Just setup on HP Microserver 1620, celeron, 10Gb ram, 16Tb as Raid5 (12Tb), with 256Gb SSD.. Installed XPEnoboot_DS3615xs_5.2-5644.5 and the DSM_DS3615xs_5644.. Everythig working fine for local access.. I cannot access via external internet (not too bothered about that). However, when i try to download and install Jun's 1.01 or 1.02b installers to a USB stick (using Win32DiskImager) i get errors during the write.. And multipel partitions are created on the flash drive.. If I go back to XPEnoboot_DS3615xs_5.2-5644.5 then no errors and just the 1 partition.. I want to upgrade to latest possible DSM, but am i missing something? What errors? Having multiple partitions is normal and intended. 14 hours ago, synogeek said: would highly suggest you open a new thread about your issue.its easier for others to help that way. Instead of this thread getting many pages long. Also did you check your PVID etc? soemtimes bad memory stick can also cause issues, do you have spares to test? Why? He is on topic. He simply has an issue with the upgrade process. Quote Link to comment Share on other sites More sharing options...
synogeek Posted July 1, 2017 Share #868 Posted July 1, 2017 10 hours ago, Polanskiman said: What errors? Having multiple partitions is normal and intended. Why? He is on topic. He simply has an issue with the upgrade process. i said so, because from experience if you create a thread for guide its advisable to ask issues / questions on a new thread. the reasoning behind this is so as not to make the tutorial thread 100's of pages long and sometimes some of those pages are actually important if i had an issue, and I open a new thread there is also the thing the search tool will bring the thread directly (new one), if you go through an existing thread (tutorial one) and look for issues it becomes PITA. maybe im wrong thats how I felt was right. Quote Link to comment Share on other sites More sharing options...
xpenology5User Posted July 2, 2017 Share #869 Posted July 2, 2017 Unfortunately the HP dc7900 BIOS doesn't have an option to choose the boot mode. Since it works with a 5.x image, is there anything that can be modified on the USB image? thanks On 6/29/2017 at 8:33 PM, Polanskiman said: Try booting in legacy instead of efi. The loader is hybrid so it can boot in both modes. Quote Link to comment Share on other sites More sharing options...
Riddick Posted July 3, 2017 Share #870 Posted July 3, 2017 Hi! Making a clear install of DSM 6.1 on a PC with 1.02b bootloader. Everything works fine until reboot. After reboot there's an grub error in rescue mode - no such partition. Flashing the stick again returns DSM to life but till next reboot. Is there a solution? Quote Link to comment Share on other sites More sharing options...
hannibal1969 Posted July 3, 2017 Share #871 Posted July 3, 2017 15 hours ago, Riddick said: Hi! Making a clear install of DSM 6.1 on a PC with 1.02b bootloader. Everything works fine until reboot. After reboot there's an grub error in rescue mode - no such partition. Flashing the stick again returns DSM to life but till next reboot. Is there a solution? Missing driver(s)? I'm still interested if there is a proper upgrade method from DSM 6.0.2-8451 Update 11 on DS3615XS -> DSM 6.03 and higher using boot loader 1.02b. Simple question. Will boot loader 1.02b still work wit DSM 6.0.2-8451 Update 11 on DS3615XS? Quote Link to comment Share on other sites More sharing options...
Riddick Posted July 3, 2017 Share #872 Posted July 3, 2017 Thanks! The problem was because the flash didn't recognize properlyof on USB 3.0 port. Used USB 2.0 and it worked. Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted July 4, 2017 Author Share #873 Posted July 4, 2017 On 7/3/2017 at 6:30 AM, xpenology5User said: Unfortunately the HP dc7900 BIOS doesn't have an option to choose the boot mode. Since it works with a 5.x image, is there anything that can be modified on the USB image? thanks Now that I remember another user had the same hardware than you and unfortunately was not able to install 6.0.2. You can read this post and the subsequent answers Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted July 4, 2017 Author Share #874 Posted July 4, 2017 I would like to remind those talking about v1.02b and DSM 6.1 that this tutorial is for DSM 6.0.2 and loader v1.01. Stick to topic or I'll start deleting posts without warning. Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted July 4, 2017 Author Share #875 Posted July 4, 2017 15 hours ago, hannibal1969 said: Missing driver(s)? I'm still interested if there is a proper upgrade method from DSM 6.0.2-8451 Update 11 on DS3615XS -> DSM 6.03 and higher using boot loader 1.02b. Simple question. Will boot loader 1.02b still work wit DSM 6.0.2-8451 Update 11 on DS3615XS? As clearly stated in the OP of the tutorial in blue, bold, increased font size and capital letters, DSM 6.0.3, DSM 6.1, DSM 6.1.1 and DSM 6.1.2 are a NO GO. with loader v1.01. Loader v1.02a/v1.02a2/v1.02b are not backward compatible with DSM 6.0.2 because its kernel is 3.10.77 and DSM 6.1, DSM 6.1.1, DSM 6.1.2 kernel is 3.10.102 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.