dark alex Posted February 15, 2013 Share #1 Posted February 15, 2013 Hi Ich have the following problem: I am running XPE under vmware on a N40L. Everything works well except one Problem: Every time I plug a USB HDD into the Server and route it through to the XPE VM it will detect this HDD as internal drive. Well... When I format it and create a share on it after the next reboot it is consodered as being uninitialized. So... I can neighter set it up as an external drive nor use it as an internal one. Whats the cause, what can I do? I need to perform Backups ti this drive. I have one sata port free so I could build the HDD into my device but that would require me to be able to use some kind of SCSI (like PVSCSI). But as soon as I plug my HDDs in a PVSCSI Controller XPE will shutdown immediately after booting... Link to comment Share on other sites More sharing options...
pbjr Posted February 16, 2013 Share #2 Posted February 16, 2013 I have the same problem with PVSCSI. You can see it boot up normal and then see it do a shutdown and power off. Link to comment Share on other sites More sharing options...
dark alex Posted February 16, 2013 Author Share #3 Posted February 16, 2013 It's annoying... I cannot do ANY Backups >. Link to comment Share on other sites More sharing options...
dark alex Posted February 18, 2013 Author Share #4 Posted February 18, 2013 Could yomeone please try to confirm the USB-Thing? Probably also with a physical XPE-Installation? And what happens if you connect a USB Disk to a 4.1 running Syno DS? (I know what should happen and what really happens on a 4.0) Link to comment Share on other sites More sharing options...
Recommended Posts