bglf83 Posted August 17, 2017 Share #51 Posted August 17, 2017 Yes, DSM 5.x does not have this issue. I have a valid mac and serial and for me it works fine on DSM 6.0 as well. Just buy a real box and use it's serial and use that as a "license" to use XPenology.Can it be any real box or must it be a 3615?Sent from my HTC 10 using Tapatalk Quote Link to comment Share on other sites More sharing options...
NeoID Posted August 18, 2017 Share #52 Posted August 18, 2017 9 hours ago, bglf83 said: Can it be any real box or must it be a 3615? Sent from my HTC 10 using Tapatalk Not sure, only tried with a real 3615. Quote Link to comment Share on other sites More sharing options...
Rhubarb Posted August 18, 2017 Share #53 Posted August 18, 2017 (edited) 16 hours ago, NeoID said: Not sure, only tried with a real 3615. Well I applied with my DS1513+ S/N to my xpenology DS3615xs emulation box. Now no problem with uploaded videos. Problem, solved. All you need is a genuine Synology S/N. Unfortunately, I'm still running my xpenology box as a DS3615xs and not a DS3617xs (preferred configuration), because there is no available Sonarr packages for the DS3617xs (xeon processor) yet. Edited August 19, 2017 by Rhubarb 1 Quote Link to comment Share on other sites More sharing options...
haldi Posted August 23, 2017 Share #54 Posted August 23, 2017 On 17.7.2017 at 6:35 PM, jarugut said: I can confirm that if you have a real sn the codec transcodification works fine! uhhh.... Haldi@NAS:~$ cat /usr/syno/etc/codec/activation.conf {"success":true,"activated_codec":["h264_dec","h264_enc"],"token":"c***********d d**************c"} Shouldn't that mean H265 stuff should be encoded into h264 if i watch a video over DLNA ? Quote Link to comment Share on other sites More sharing options...
Bob the Builder Posted August 27, 2017 Share #55 Posted August 27, 2017 В 17.7.2017 в 18:35, jarugut сказал: I can confirm that if you have a real sn the codec transcodification works fine! yes Quote Link to comment Share on other sites More sharing options...
haldi Posted August 29, 2017 Share #56 Posted August 29, 2017 Yeah okay... it's working.... It's transcoding. 1920x1080p videos from x264 to MPEG-ts 840x480 pixel But if you use a X264 10 bit oder x265 Video stream then you only get Sound and a Black screen. Quote Link to comment Share on other sites More sharing options...
seeiis Posted August 31, 2017 Share #57 Posted August 31, 2017 I use a SN Valid for another synology official (RS816) and it works fine! 1 Quote Link to comment Share on other sites More sharing options...
veuchez Posted September 7, 2017 Share #58 Posted September 7, 2017 Hello to all, excuse English but use google translate =) I installed Xpenology (DS3615xs) DSM 6.1.3-15152 Update 4 on ESXI 6.5 with Loader 1.02a2. I always get the error "System failed to convert video [/volume1/photo/.....59272.mp4] to mpeg4." I modified the serial with the generator https://xpenology.github.io/serial_generator/serial_generator.html The situation does not change. I wanted to try updating to the last 1.02b loader, but I do not know how to do it because there is only the iso or img file. Some advice? Thank you. Quote Link to comment Share on other sites More sharing options...
JMRR Posted September 7, 2017 Share #59 Posted September 7, 2017 you need a valid SN Quote Link to comment Share on other sites More sharing options...
veuchez Posted September 8, 2017 Share #60 Posted September 8, 2017 On 7/9/2017 at 11:39 AM, JMRR said: you need a valid SN And where do I find it? Quote Link to comment Share on other sites More sharing options...
JMRR Posted September 9, 2017 Share #61 Posted September 9, 2017 on original syno equipments. Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted September 18, 2017 Share #62 Posted September 18, 2017 A better alternative is to use a serial generator. I have updated the script code as the old generator produced by @fonix232 was producing invalid Serial Numbers. The new one can be found here: https://xpenogen.github.io/serial_generator/index.html 1 Quote Link to comment Share on other sites More sharing options...
Eduardo Posted September 18, 2017 Share #63 Posted September 18, 2017 (edited) Only SN? Does Xpenology work without matching MAC? I thought a paired MAC-SN was needed to run it. Edited September 18, 2017 by Eduardo Quote Link to comment Share on other sites More sharing options...
krisr77 Posted September 18, 2017 Share #64 Posted September 18, 2017 it seems that for video convert it only need valid sn for other services (like QucikConnect etc) valid sn and mac must be provided Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted September 19, 2017 Share #65 Posted September 19, 2017 Only SN? Does Xpenology work without matching MAC? I thought a paired MAC-SN was needed to run it.DSM works fine without any of the two but some proprietary apps/features will be impaired/disfuntional either without a valid SN or without a paired SN/MAC (Quickconnect and push notifications being the two most significant ones). Paired SN/MAC generators are not being promoted in this forum (announcement) due to their abusive nature. Impaired/disfunctional apps/features can very easily be bypassed/ignored by using third party apps/features (i.e Plex for media, Custom DDNS as replacement of Quickconnect). Quote Link to comment Share on other sites More sharing options...
Eduardo Posted September 19, 2017 Share #66 Posted September 19, 2017 7 hours ago, Polanskiman said: DSM works fine without any of the two but some proprietary apps/features will be impaired/disfuntional either without a valid SN or without a paired SN/MAC (Quickconnect and push notifications being the two most significant ones). Paired SN/MAC generators are not being promoted in this forum (announcement) due to their abusive nature. Impaired/disfunctional apps/features can very easily be bypassed/ignored by using third party apps/features (i.e Plex for media, Custom DDNS as replacement of Quickconnect). I knew about propietary apps/features and SN/MAC generators rules. I don't use them. But I thought paired SN/MAC was needed for running XPEnology itself. Thanks for the info. Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted September 19, 2017 Share #67 Posted September 19, 2017 1 hour ago, Eduardo said: I knew about propietary apps/features and SN/MAC generators rules. I don't use them. But I thought paired SN/MAC was needed for running XPEnology itself. Thanks for the info. No it's not necessary. Never has been in fact. It has only been used for one thing and one thing only: the use of Quickconnect. Quote Link to comment Share on other sites More sharing options...
bglf83 Posted September 19, 2017 Share #68 Posted September 19, 2017 No it's not necessary. Never has been in fact. It has only been used for one thing and one thing only: the use of Quickconnect.Necessary for photo station and video station to transcode.Sent from my HTC 10 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted September 20, 2017 Share #69 Posted September 20, 2017 1 hour ago, bglf83 said: Necessary for photo station and video station to transcode. Sent from my HTC 10 using Tapatalk You might have well read three posts above... I was answering to a very specific question. Quote Link to comment Share on other sites More sharing options...
math316 Posted September 21, 2017 Share #70 Posted September 21, 2017 I've tried a real 413j sn on my 3617 jun's 1.02B and it's working fine Quote Link to comment Share on other sites More sharing options...
haldi Posted October 19, 2017 Share #71 Posted October 19, 2017 On 23.8.2017 at 6:14 PM, haldi said: uhhh.... Haldi@NAS:~$ cat /usr/syno/etc/codec/activation.conf {"success":true,"activated_codec":["h264_dec","h264_enc"],"token":"c***********d d**************c"} Shouldn't that mean H265 stuff should be encoded into h264 if i watch a video over DLNA ? Small Update... switched from Celeron G1610T to a Xeon 1265L Sandybridge with iGPU Haldi@NAS:~$ cat /usr/syno/etc/codec/activation.conf {"success":true,"activated_codec":["h264_enc","h264_dec","mpeg4part2_dec","vc1_dec","vc1_enc","aac_dec","aac_enc"],"token":"4*******c"} Quote Link to comment Share on other sites More sharing options...
ravest Posted November 3, 2017 Share #72 Posted November 3, 2017 Can someone check the generator? I think the range of SN has been blacklisted. Quote Link to comment Share on other sites More sharing options...
smokers Posted November 7, 2017 Share #73 Posted November 7, 2017 On 23.8.2017 at 6:14 PM, haldi said: uhhh.... Haldi@NAS:~$ cat /usr/syno/etc/codec/activation.conf {"success":true,"activated_codec":["h264_dec","h264_enc"],"token":"c***********d d**************c"} Shouldn't that mean H265 stuff should be encoded into h264 if i watch a video over DLNA ? @haldi which Image do you currently use ? ds916+ / 3617xs / 3615xs ? So you are saying that Hardware transcode works, using video station right ? Did you ever tried plex with that ? Iam currently try to build my box as a plex station with support for hardware transcode of plex. I‘m using a Intel Xeon 1245 v6. Thanks Quote Link to comment Share on other sites More sharing options...
chuanzai Posted November 23, 2017 Share #74 Posted November 23, 2017 update to 6.1.4 SN format is wrong Quote Link to comment Share on other sites More sharing options...
cseb Posted November 25, 2017 Share #75 Posted November 25, 2017 Hi, same issue, can't find a valid SN . Someone can help me ? Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.