Jump to content
XPEnology Community

Having problem detecting hdd via syba sata add on card


mahojazz

Recommended Posts

Hi. I am using an addon card for more sata ports. Its a syba 8port pci-e 2.0 x1 card. Model number is SD- PEX40104. it uses marvell chipset, 88SE9215 and 88SM9705. Xpenology 5.2 build 5967.1 managed to detect 4 ports that is at the top, but the other 4 ports at the sides are not detected.

Motherboard's 2x sata ports are also detected.

Does anyone know the problem? I went thru compatibility table and found marvell 9215 chipset is supported. Does port multiplier 9705 need to be supported as well? Thanks.

 

 

Sent from my SM-N910G using Tapatalk

Link to comment
Share on other sites

I use a LSI SAS 9201-16i which works perfect. The only thing that doesn't work with the card is SNMP.

Yes. I saw LSI to be supported in the hardware list. Being a low cost built, i am gonna stuck with 6 ports sata, 4 from the card, 2 from motherboard.

Thanks.

 

Sent from my SM-N910G using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...