netember Posted October 8 #1 Posted October 8 - Outcome of the update: UNSUCCESSFUL - DSM version prior update: DSM 7.2.2 UPDATE 4 - Loader version and model: ARC Loader 3.0.2 - DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Fujitsu Celsius W420 I5-3470 -8GB - NIC: e1000e - Additional comments: HANGED Quote
TOWERPC Posted October 8 #2 Posted October 8 - Outcome of the update: UNSUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 4 - Loader version and model: RR Red Pill 25.9.7 / SA6400 - Using custom extra.lzma: NO - Installation type: BAREMETAL TESTING Notebook HP 250 G8 Intel Core i3 1005G1 + 8 GB DDR4 3200 + SSD SATA Kingston A400 480GB + NIC Realtek 8168 - Additional comments: DSM DONT BOOT: After the update, the system no longer boots. Apparently, the device starts up normally (the RR screen is visible), and then the monitor turns off as configured to do so automatically. There is no apparent network connectivity. Possibly a network-related issue is preventing the connection. Quote
MacAce Posted October 9 #3 Posted October 9 (edited) - Outcome of the update: UNSUCCESSFUL - DSM version prior update: DSM 7.2.2 UPDATE 4 - Loader version and model: ARC Loader 3.0.2 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asus H110i i5-7500 - Additional comments: It starts to boot to the normal point that the console will inoperable. Then it stopped / hanged Edited October 9 by MacAce Quote
Peter Suh Posted October 9 #4 Posted October 9 7 minutes ago, jacqlittle said: Loaders are not ready for the latest version of DSM, so it is recommended that you do not attempt to update DSM yet. Yes, that's correct. The DSM 7.3 toolchain hasn't been released yet, so the current loader is unstable. While kernel 4-based systems have been developed to function reasonably well (only mshell), kernel 5-based systems, such as the sa6400, have issues with networking. 3 Quote
biowerewolf Posted October 9 #5 Posted October 9 - Результат обновления: НЕУДАЧНО - Версия DSM до обновления: DSM 7.2.2 ОБНОВЛЕНИЕ 4 - Версия и модель загрузчика: ARC Loader 3.0.2 - DS920+ - Использование пользовательского extra.lzma: НЕТ - Тип установки: PC Intel J4005 / 8 ГБ - Дополнительные комментарии: IP adress - ok, boot - error "Could not build Loader!" Что теперь делать? Quote
Peter Suh Posted October 9 #6 Posted October 9 10 minutes ago, biowerewolf said: - Результат обновления: НЕУДАЧНО - Версия DSM до обновления: DSM 7.2.2 ОБНОВЛЕНИЕ 4 - Версия и модель загрузчика: ARC Loader 3.0.2 - DS920+ - Использование пользовательского extra.lzma: НЕТ - Тип установки: PC Intel J4005 / 8 ГБ - Дополнительные комментарии: IP adress - ok, boot - error "Could not build Loader!" Что теперь делать? Please use English for basic posts. Thank you. 1 Quote
Hemps Posted October 10 #7 Posted October 10 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2 UPDATE 4 - Arc Loader 23.10.25 - Updated to Arc Loader 3.0.2 - Kept same model, after Arc update it did recover and reboot - ssh in - wget https://global.synologydownload.com/download/DSM/release/7.3/81180/DSM_DS1618%2B_81180.pat - did manual --patch update - reboot - started to update 8 apps - Loader version and model: ARC Loader 3.0.2 - DS1819+ - Using custom extra.lzma: NO - Installation type: ProxMox VM Quote
Peter Suh Posted October 13 #8 Posted October 13 (edited) Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 4 - DSM version after update: DSM 7.3-81180 Update 0 - Loader version and model: TinyCore RedPill Loader v1.2.6.0.m-shell.img DS920xs+, DS918xs+, DS3622xs+, DVA3221 (All Kernel 4.4 Base Platform) - Installation type: Intel 4th generation ~ Intel 10th generation BareMetal - Additional comments: Manual update via DSM Control Panel and 7.3 loader build (very Important point, Preserve settings and packages) Edited October 13 by Peter Suh 3 Quote
Peter Suh Posted October 13 #9 Posted October 13 (edited) Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 4 - DSM version after update: DSM 7.3-81180 Update 0 - Loader version and model: TinyCore RedPill Loader v1.2.6.0.m-shell.img SA6400, DS925+ (All Kernel 5.10 Base Platform) - Installation type: PROXMOX VE (Virtio_net only) - Additional comments: Manual update via DSM Control Panel and 7.3 loader build (very Important point, Preserve settings and packages) Edited October 13 by Peter Suh 2 1 Quote
gericb Posted October 13 #10 Posted October 13 (edited) Outcome of the update: UNSUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 4 - DSM version after update: DSM 7.3-81180 Update 0 - Loader version and model: TinyCore RedPill Loader v1.2.6.0.m-shell.img DS920xs+ - Installation type: Intel 8th generation BareMetal - Additional comments: Manual update via DSM Control Panel. ERROR: The available drive space of this system is insufficient. I assume md0 as the total free user space is 568.1 GB. Edited October 13 by gericb Quote
freddie Posted October 14 #11 Posted October 14 Le 13/10/2025 à 15:43, Peter Suh a dit : Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 4 - DSM version after update: DSM 7.3-81180 Update 0 - Loader version and model: TinyCore RedPill Loader v1.2.6.0.m-shell.img DS920xs+, DS918xs+, DS3622xs+, DVA3221 (All Kernel 4.4 Base Platform) - Installation type: Intel 4th generation ~ Intel 10th generation BareMetal - Additional comments: Manual update via DSM Control Panel and 7.3 loader build (very Important point, Preserve settings and packages) Hello PeterSuh, How to use Kernel 4.4 ? where I can check the version please Thanks! Quote
Hello World Posted October 16 #12 Posted October 16 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 4 - DSM version after update: DSM 7.3-81180 Update 0 - Loader version and model: RR Loader v25.9.7 DS3622xs - Installation type: I5-10500 - Additional comments: Manual update via DSM Control Panel Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 4 - DSM version after update: DSM 7.3-81180 Update 0 - Loader version and model: RR Loader v25.9.7 DS3622xs - Installation type: D-1581 - Additional comments: Manual update via DSM Control Panel Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 4 - DSM version after update: DSM 7.3-81180 Update 0 - Loader version and model: RR Loader v25.9.7 DS918+ - Installation type: J3700 - Additional comments: Manual update via DSM Control Panel Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 4 - DSM version after update: DSM 7.3-81180 Update 0 - Loader version and model: RR Loader v25.9.7 DS3617xs - Installation type: PVE - Additional comments: Manual update via DSM Control Panel Quote
sangandi Posted October 16 #13 Posted October 16 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2 UPDATE 4 - DSM version after update: DSM 7.3-81180 Update 0 - Loader version and model: ARC Loader 3.0.2 - DVA3221 - Installation type: UNRAID VM - Additional comments: Manual update via DSM Control Panel Quote
freddie Posted October 18 #14 Posted October 18 - Outcome of the update: UNSUCCESSFUL - DSM version prior update: DSM 7.2.2 UPDATE 4 - DSM Version update : DSM 7.3.0-81180 Update 0 - Loader version and model: TinyCore M-Shell v1.2.6.0 - DS3622xs+ LKM : prod-25.10.8 - Using custom extra.lzma: NO - Installation type: BAREMETAL HP P6-2020fr/ZABF I3-2120 et Eth0 (r8169) 8Go RAM, RealMAC <= Hope this PC not too Old. - Additional comments: update by DSM update page first, i Rebuild in TCRP build loader in second, but ; "Booting OK", but no Networking Activities, Boot in UEFI mode, Loader bus : USB with TCRP Friend : 0.1.3n. PS: if Anyone have a Solution (not in production - in test mode) Thanks. Quote
jacqlittle Posted October 18 #15 Posted October 18 Outcome of the update: SUCCESFUL DSM version prior update: DSM 7.2.2-72806 Update 4 DSM version after update: DSM 7.3-81130 Loader version and model: Arc Loader 3.0.3 / DS3622xs+ Installation type: BAREMETAL – Fujitsu Celsius W530 Additional comments: Update Arc Loader 3.0.0 to version 3.0.3 and rebuild Loader selecting DSM 7.3-81130 1 Quote
vicrod74 Posted October 19 #16 Posted October 19 (edited) Outcome of the update: SUCCESFUL DSM version prior update: DSM 7.2.2-72806 Update 4 DSM version after update: DSM 7.3-81130 Loader version and model: Arc Loader 3.0.3 / DS3622xs+ Installation type: BAREMETAL – Intel(R) Core i7-4770K, Gigabyte H87-D3H Mobo Additional comments: Update: Arc Loader 3.0.0 to version 3.0.3 and rebuild Loader selecting DSM 7.3-81130, In addition, my disks are now displaying "Unverified" in Storage Manager section. Will there be a patch for this soon? My data is still intact so no big issue. Edited October 19 by vicrod74 Quote
level001 Posted October 21 #17 Posted October 21 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 4 - DSM version after update: DSM 7.3-81180 - Loader version and model during update: ARC 3.03 / DS3622xs+ - Installation type: BAREMETAL – HP ProLiant MicroServer Gen10 AMD Opteron X3216/16GB (AMD Opertron) - Additional comments: boots from USB inside the case. Clear install from arc loader and restore. Remove the static ip before update Edited October 21 by level001 1 Quote
PasoApaso Posted November 3 #18 Posted November 3 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 4 - DSM version after update: DSM 7.3.1-86003 - Loader version and model during update: RRLoader 25.9.7 / DVA1622 - Installation type: BAREMETAL – ASROCK Intel J3455 - Additional comments: boots from USB. Updated via booting into loader. Had to upgrade trough GUI. *** You're /root content gets wiped during upgrade to 7.3 Quote
SuperJack Posted Saturday at 06:26 AM #19 Posted Saturday at 06:26 AM Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 4 - DSM version after update: DSM 7.3-81180 - Loader version and model: TinyCore RedPill Loader v1.2.6.5.m-shell.img DS3622xs+ - Using custom extra.lzma: NO - Installation type: HPE MicroServer Gen10 Plus - Additional comments: Automatic update via DSM Control Panel Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.