gericb Posted February 5 #1 Posted February 5 https://www.synology.com/en-global/releaseNote/DSM Spoiler Version: 7.2.2-72806 Update 3 Important Update (2025-02-04) Important notes Your Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to update it manually. The update is not available in your region yet. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly. Your DSM is working fine without having to update. The system evaluates service statuses and system settings to determine whether it needs to update to this version. This update will restart the device. What's New Added support for verifying LDAP server certificates when joining a directory. The following limitations apply: Certificate verification for C2 Identity Edge Server is not supported. This configuration cannot be backed up in DSM system configuration backup or Hyper Backup Entire System Backup. Fixed Issues Fixed a security vulnerabilities (Synology-SA-25:01). Quote
bearcat Posted February 12 #2 Posted February 12 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 update 2 - Loader version and model: tinycore-redpill (.v1.0.5.2.m-shell) - DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP N36L Microserver - Additional comments: Notification and update via DSM Control Panel, reboot 1 Quote
atari Posted February 12 #3 Posted February 12 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 2 - DSM version AFTER update: DSM 7.2.2-72806 Update 3 - Loader version and model: ArcLoader 1.2.1 (241227) - DS 1621+ - Installation type: ProxMox VM - Additional comments: Notification and update via DSM Control Panel, reboot Quote
sliders Posted February 12 #4 Posted February 12 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 2 - DSM version AFTER update: DSM 7.2.2-72806 Update 3 - Loader version and model: tinycore-redpill - DVA1622 NVR - Installation type: BAREMETAL - HP Prodesk G7 I5-10500 -Ram 16Go - Additional comments: Notification and update via DSM Control Panel - Additional comments: THANKS 😉 1 Quote
MTJunior Posted February 12 #5 Posted February 12 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 2 - DSM version AFTER update: DSM 7.2.2-72806 Update 3 - Loader version and model: Redpill Arc 1.5.11 - DS3622xs+ - Installation type: Home Server - X99 Extreme4 Intel Xeon E5-2670v3 - Ram64Gb - Additional comments: Notification and update via DSM Control Panel - Additional comments: Very THANKS 😉 Quote
jacqlittle Posted February 13 #6 Posted February 13 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 2 - DSM version after update: DSM 7.2.2-72806 Update 3 - Loader version and model: Arc Loader 1.5.13 / DS3622xs+ - Installation type: BAREMETAL – Fujitsu Celsius W530 - Additional comments: Manually update via DSM Control Panel Quote
keqas78 Posted February 13 #7 Posted February 13 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 2 - DSM version after update: DSM 7.2.2-72806 Update 3 - Loader version and model: Arc Loader 1.5.11 / DS3622xs+ - Installation type: BAREMETAL – HP ProLiant MicroServer Gen8 - Additional comments: Notification and update via DSM Control Panel; manual reboot Quote
Mikael Juber Posted February 14 #8 Posted February 14 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 2 - DSM version AFTER update: DSM 7.2.2-72806 Update 3 - Loader version and model: Redpill Arc 1.5.11 - DS3622xs+ - Installation type: Home Server - HP Microserver Gen10 Plus - Additional comments: Notification and update via DSM Control Panel - Additional comments: Quote
myxcon Posted February 15 #9 Posted February 15 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 update 2 - Loader version and model: tinycore-redpill (.v1.2.0.0m-shell) - DS1520+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Fujitsu P757 - Additional comments: Notification and update via DSM Control Panel, reboot 1 Quote
Fab8126 Posted February 15 #10 Posted February 15 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 2 - DSM version after update: DSM 7.2.2-72806 Update 3 - Loader version and model: RR 25.1.4 / DS3622xs+ - Installation type: BAREMETAL – HP ProLiant MicroServer Gen7 - N54L - Additional comments: Notification and update via DSM Control Panel; reboot Quote
Fulatins Posted February 16 #11 Posted February 16 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 2 - DSM version after update: DSM 7.2.2-72806 Update 3 - Loader version and model: Arc Loader 1.1.9 / DS3622xs+ - Installation type: BAREMETAL - Additional comments: Notification and update via DSM Control Panel, no issues. Quote
ikofen Posted February 16 #12 Posted February 16 Outcome of the update: SUCCESSFUL DSM version prior update: DSM 7.2.2-72806 Update 2 DSM version after update: DSM 7.2.2-72806 Update 3 Loader version and model: ARPL-i18n / DS3622xs+ Installation type: BAREMETAL - MB: ASUS P5Q Deluxe / CPU: Q6600 Additional comments: Manual update from control panel Bootloader not updated Quote
Paars Posted February 17 #13 Posted February 17 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 2 - DSM version after update: DSM 7.2.2-72806 Update 3 - Loader version and model: ARC v1.1.9 - DS3622xs+ - Installation type: ESXi (6.7.0 Update 2) - HP ProLiant MicroServer Gen8 (E3-1220L V2, 16GB RAM, passed-through AHCI Controller, ESXi on SSD) - Additional comments: Automatic update through control panel Quote
hansel Posted February 17 #14 Posted February 17 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 2 - DSM version after update: DSM 7.2.2-72806 Update 3 - Loader version and model: RedPill 7.1.1 / DS3622xs+ - Installation type: BAREMETAL - HP ProLiant MicroServer N40L - Additional comments: Notification and update via DSM Control Panel, reboot, no issues. Quote
VanChle Posted February 19 #15 Posted February 19 - Outcome of the update: SUCCESSFUL - DSM version PRIOR update: DSM 7.2.2-72806 Update 2 - DSM version AFTER update: DSM 7.2.2-72806 Update 3 - Loader version and model: TCRP w-Friend v1.0.6.7.m-shell / DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASRock J5040-ITX - Additional comments: Notification and update via DSM Control Panel (download .pat and install), reboot, no issues. 1 Quote
stanky Posted February 19 #16 Posted February 19 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.1 69057-Update 6 - DSM version AFTER update: DSM 7.2.2-72806 Update 3 - Loader version and model: ARC 24.3.24 / DS923+ - Using custom extra.lzma: NO - Installation type: BAREMETAL AsRock Q1900-ITX Quote
maxx007at Posted February 20 #17 Posted February 20 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 2 - DSM version after update: DSM 7.2.2-72806 Update 3 - Loader version and model: Arc Loader 1.5.19 / DS918+ - Installation type: BAREMETAL (Acer EasyStore H341 - 2Gb RAM/Intel Atom D410) - Additional comments: Notification and update via DSM Control Panel, no issues. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 2 - DSM version after update: DSM 7.2.2-72806 Update 3 - Loader version and model: Arc Loader 1.5.19 / DS3622xs+ - Installation type: VM in VMWare Workstation 17.6.2 - Additional comments: Notification and update via DSM Control Panel, no issues. Edited February 20 by maxx007at Quote
MichelD Posted February 22 #18 Posted February 22 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 2 - Loader version and model: ARC 1.1.12 | DS3622xs+ - Installation type: BAREMETAL - HP Prodesk 400 G2 Mini - i3-6100T - 8GB DDR4 - Additional comments: Notification and update via DSM Control Panel, reboot - Question: I created a new USB stick using image 1.5.19 and followed the automated procedure. Does anybody know why I end up with loader 1.1.12? Quote
merve04 Posted February 22 #19 Posted February 22 - Outcome of the update: SUCCESSFUL - DSM version prior to update: DSM 7.2.2-72806-U2 - DSM version after update: DSM 7.2.2-72806-U3 - Loader version and model prior to update: ARC 1.2.5 (DVA1622) - Loader version and model after update: ARC 1.2.5 (DVA1622) - Using custom extra.lzma: NO - Installation type: BAREMETAL - Gigabyte B365-DS3H, i5-8400, 10x12TB, 2x4TB - Additional comments: Updated from control panel. Quote
PeteyNice Posted February 23 #20 Posted February 23 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.1 69057-Update 3 - DSM version AFTER update: DSM 7.2.2-72806 Update 3 - Loader version and model: ARC 24.1.27-next / DS923+ - Using custom extra.lzma: NO - Installation type: BAREMETAL AsRock Q1900-ITX - Comments: Updating ARC from the menu failed. After that, I could not boot to DSM directly. Rebuilt loader from the menu and was presented with "your disks have moved". Selected "keep settings etc" and it rebooted into 7.2.2. Edited February 23 by PeteyNice Color on SUCCESSFUL Quote
Mai_Mai Posted February 26 #21 Posted February 26 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.1-42962 Update 8 - DSM version after update: DSM 7.2.2-72806 Update 3 - Loader version and model: Arc Loader 1.5.20 / DS3622xs+ - Installation type: BAREMETAL – HP ProLiant MicroServer Gen8 with additional intel NIC (EXP9301CTBLK / 82574L) - Additional comments: internal NIC disabled. Migrated from 7.1.1 to 7.2.2 using https://finds.sinology.com Quote
albajabato Posted February 27 #22 Posted February 27 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 2 - DSM version after update: DSM 7.2.2-72806 Update 3 - Loader version and model: ARC 24.08.09 - DS3622xs+ - Installation type: ESXi (7.0 Update 3) - HP ProLiant MicroServer Gen8 (E31260L V2, 16GB RAM, 256GB NVMe, AHCI Controller passthrough) - Additional comments: Notification and update via DSM Control Panel Quote
SuperJack Posted March 1 #23 Posted March 1 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 2 - DSM version after update: DSM 7.2.2-72806 Update 3 - Loader version and model: TinyCore RedPill Loader v1.2.1.6.m-shell.img DS3622xs+ - Using custom extra.lzma: NO - Installation type: HPE MicroServer Gen10 Plus - Additional comments: Manual update via DSM Control Panel 1 Quote
Onknight Posted March 4 #24 Posted March 4 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.2-72806 Update 2 - DSM version after update: DSM 7.2.2-72806 Update 3 - Loader version and model: Arc red Pill Loader 24.08.27 / DS1821+ - IBM X3200 M3 Computer Edited March 5 by Onknight Quote
Onknight Posted March 4 #25 Posted March 4 (edited) - Outcome of the update: SUCCESSFUL - PC Dell l Power Edge T110 - DSM version prior update. DSM 7.1.1-42962 Update 6 -- DSM version after updat: 7.2.2-72806 Update 3 now -- Additional comments: had to rebuild a loader using ARC Redpill Loader Edited March 5 by Onknight Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.