Rebuild SataMap

[Trabalhador Anonimo]

I have a box (3622xs+ on USB drive) with 10 (1TG each) disks. 5 of it are connected to MB and the other 5 are connecte to a HBA (Fujitsu Lsi 9211-8i Modelo: D2607-a21). I put a SSD for cache and DSM simple disable onde of the HDD and enable the SSD, messing up with my Volume (it get degrade).

I do not know much about linux, only a few commands. Is there a way to rebuild the sata map without loose everything?

[Trabalhador Anonimo]

@Peter Suh Edit SataMap to change number of sata ports: is it necessary to boot the box on m-shell instance and connect via SSH?

[Trabalhador Anonimo]

I try to edit config.json, but SataPortMap and DiskIdxMap are blank:

SataPortMap = " "

DiskIdxMap ->nothing is written

So, how can I set more disks to my box without mess things up?

[Trabalhador Anonimo]

What is this?

tc@box:~$ ./rploader.sh satamap now
usb
Loader BUS: usb
Found SCSI HBAs, We need to install the SCSI modules
scsi-5.10.3-tinycore64 is already installed!
Succesfully installed SCSI modules

Found "00:1f.2 Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)"
Detected 6 ports/5 drives. Override # of ports or ENTER to accept <6>

Found SCSI/HBA "01:00.0 LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 02)" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid bus number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (84 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)

Computed settings:
SataPortMap=6
DiskIdxMap=00

Should i update the user_config.json with these values ? [Yy/Nn] n
OK remember to update manually by editing user_config.json file
tc@box:~$ exit

 

In fact, the model is Controladora Fujitsu Lsi 9211-8i Model: D2607-a21.

Is that error means that my HBA is not been recognised?

5 of 6 HDD on HBA is been shown on DSM.

Edited April 3, 2024 by Trabalhador Anonimo

[Trabalhador Anonimo]

User@NAS-BOX-3:/$ lspci -nn
0000:00:00.0 Class [0600]: Device [8086:0c08] (rev 06)
0000:00:01.0 Class [0604]: Device [8086:0c01] (rev 06)
0000:00:14.0 Class [0c03]: Device [8086:8c31] (rev 05)
0000:00:16.0 Class [0780]: Device [8086:8c3a] (rev 04)
0000:00:1a.0 Class [0c03]: Device [8086:8c2d] (rev 05)
0000:00:1b.0 Class [0403]: Device [8086:8c20] (rev 05)
0000:00:1c.0 Class [0604]: Device [8086:8c10] (rev d5)
0000:00:1c.2 Class [0604]: Device [8086:8c14] (rev d5)
0000:00:1c.3 Class [0604]: Device [8086:244e] (rev d5)
0000:00:1c.4 Class [0604]: Device [8086:8c18] (rev d5)
0000:00:1d.0 Class [0c03]: Device [8086:8c26] (rev 05)
0000:00:1f.0 Class [0601]: Device [8086:8c50] (rev 05)
0000:00:1f.2 Class [0106]: Device [8086:8c02] (rev 05)
0000:00:1f.3 Class [0c05]: Device [8086:8c22] (rev 05)
0000:01:00.0 Class [0104]: Device [1000:0072] (rev 02)
0000:03:00.0 Class [0200]: Device [10ec:8168] (rev 09)
0000:04:00.0 Class [0604]: Device [1b21:1080] (rev 04)
0000:05:00.0 Class [0200]: Device [10ec:8169] (rev 10)
0000:06:00.0 Class [0300]: Device [10de:0ca3] (rev a2)
0000:06:00.1 Class [0403]: Device [10de:0be4] (rev a1)
0001:09:00.0 Class [0106]: Device [1b4b:9235] (rev 11)
0001:0c:00.0 Class [0106]: Device [1b4b:9235] (rev 11)