Stoker Posted March 17, 2017 Share #1 Posted March 17, 2017 Hi guys, I'm using XPENology 6.02 with Juns Loader for a few months on ma DELL T20 with four Harddrives on the onboard SATA Controller without any Problems. Three days ago I disconnected all Drives to do a Firmwareupdate on one of the drives (but I didn't do the Update after all). So I Connected all the drives again and wanted to start the Server, but it didn't work. The Boot screen is showing the same screen as before, but I cant connect to the web Interface and the DS Finder doesn't find the Diskstation. Furthermore the DS doesn't connect to my Router. I booted to the config Menu of the Diskstation and now the DS gets a IP via DHCP and I can connect to the Web Interface, there is written, that there are failures with the HDDs on SATA Port 5 and 6 and that the SATA Ports has been disabled. The strange thing is, that the T20 doesn't have a SATA Port 5 and 6, it only has 4 SATA Ports. In the config file of Juns Loader I configured the SATA ports as "422", but that never was a problem. I don't now what to do right now, does someone has a clue whats the Problem? Please help me Quote Link to comment Share on other sites More sharing options...
Stoker Posted March 20, 2017 Author Share #2 Posted March 20, 2017 Hello, has someone out there a clue how to fix that? Quote Link to comment Share on other sites More sharing options...
F5BJR Posted March 20, 2017 Share #3 Posted March 20, 2017 If you have 6 HDD connected to the same sata chipset the value is : SATA ports is "6" and not 422 ( this value is for 3 controllers with 4 * HDD + 2 anothers with 2 * HDD ) Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted March 21, 2017 Share #4 Posted March 21, 2017 Hello, has someone out there a clue how to fix that? Seems to me you didn't connect the HDDs in the same order or on the same ports there connect to prior disconnecting them. HDD should ALWAYS remain in the same order and on the same ports. Quote Link to comment Share on other sites More sharing options...
Stoker Posted March 21, 2017 Author Share #5 Posted March 21, 2017 If you have 6 HDD connected to the same sata chipset the value is : SATA ports is "6" and not 422 ( this value is for 3 controllers with 4 * HDD + 2 anothers with 2 * HDD ) OK, but I have only one Controller with 4 Ports in my T20, and it does't help if I set it to "4". In the past "422" never was a Problem. Seems to me you didn't connect the HDDs in the same order or on the same ports there connect to prior disconnecting them. HDD should ALWAYS remain in the same order and on the same ports. I thougt so too, but I tryed every Port with every HDD now. Since I have no Raid configured it should be possible to disconnect 3 of the Harddrives and try all four ports with the remaining one, is that right? Quote Link to comment Share on other sites More sharing options...
Saman Posted November 28, 2019 Share #6 Posted November 28, 2019 I have the same Problem! Someone know how to fix this? Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.