alexnikolas Posted June 3, 2023 Share #26 Posted June 3, 2023 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64561 - Loader version and model: 23.5.55 / DS920+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Nettop 3QNTP-SHELL-CELERON J1900 (4Core) - Additional comments: Switching BIOS to mode UEFI Quote Link to comment Share on other sites More sharing options...
Zhyryrk Posted June 3, 2023 Share #27 Posted June 3, 2023 - Outcome of the update: FAILED - DSM version prior update: DSM 7.1.1-42962 Update 5 - Loader version and model: ARPL v1.1-beta2 - DVA1622 - Using custom extra.lzma: NO - Installation type: BAREMETAL - FUJITSU D3417-B21 GS2; Intel Core i5-7500T; 8GB DDR4; 2x4TB HDD - Additional comments: Updated via DSM GUI to DSM 7.2-64561 but unable to rebuild bootloader due to missing "64561" in Build Number menu =( - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.1-42962 Update 5 - Loader version and model: TCRP v0.9.4.8 with Friend - DVA1622 - Using custom extra.lzma: NO - Installation type: BAREMETAL - FUJITSU D3417-B21 GS2; Intel Core i5-7500T; 8GB DDR4; 2x4TB HDD - Additional comments: Works fine after swapping bootloader from ARPL v1.1-beta2 to TCRP v0.9.4.8 Quote Link to comment Share on other sites More sharing options...
justinavril Posted June 4, 2023 Share #28 Posted June 4, 2023 On 5/24/2023 at 6:20 PM, m3rlin76 said: - Outcome of the update: SUCCESSFUL - DSM version prior update: ARC v23.5.x DS3622xs+ DSM 7.2 RC 64551 - Loader version and model: ARC v23.5.53 DS3622xs+ DSM 7.2 64561 - Installation type: ESX 6.5 on HPE Microserver Gen 8 with passthrough USB3 controller Same HW, how did you upgrade to DSM 7.2? I'm running DSM 7.1-42661 Update 1 right now. Quote Link to comment Share on other sites More sharing options...
namvan Posted June 6, 2023 Share #29 Posted June 6, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.1-42962 - Loader version and model: arpl-arc 23.6.22_vmdk-dyn DS918+ - Using custom extra.lzma: NO - Installation type: QEMU/KVM with disks passthrough - Additional comments: + built new loader + upgrade existing DSM via Synology Assistant Quote Link to comment Share on other sites More sharing options...
smileyworld Posted June 8, 2023 Share #30 Posted June 8, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.1-42962 - Loader version and model: PeterSuh's tcrp v0.9.4.3-2 JOT DS3622xs+ - Using custom extra.lzma: NO - Installation type: Baremetal - Additional comments: + Unplugged the X540-T2 NIC before upgrading + built new loader + upgrade existing DSM via Synology Assistant Quote Link to comment Share on other sites More sharing options...
Thesevenn Posted June 9, 2023 Share #31 Posted June 9, 2023 This update has been recalled and replaced by 7.2-64570, see release notes of DSM: Quote Version: 7.2-64561 (2023-05-22) Important Note This update has been recalled on June 8, 2023, because of an issue where updating to DSM 7.2 might fail if users' Synology NAS were not connected to the Internet. The issue is fixed in version 7.2-64570. 1 Quote Link to comment Share on other sites More sharing options...
merve04 Posted June 10, 2023 Share #32 Posted June 10, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.1-42962 Update 5 - Loader version and model: TCRP v0.9.4.3-2 w\Friend 0.0.6 (DVA1622) - Using custom extra.lzma: NO - Installation type: BAREMETAL - Gigabyte B365-DS3H, i5-8400, 8x12TB, 2x4TB - Additional comments: Updated via DSM GUI, rebooted, Synology Assistant reported "not installed". I suspect its because TCRP w\Friend reports NO IP during boot and cant perform the upgrade. Booted in TCRP and let it update to latest version, looks like it brought me up to 0.0.8, and let it reboot again, back in DSM now. *It seems odd that the loader builder screen has no problems obtaining an IP but when it boots, no IP . Is this a driver issue? Edited June 10, 2023 by merve04 Quote Link to comment Share on other sites More sharing options...
ivankong Posted June 11, 2023 Share #33 Posted June 11, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: ARPL v0.5 Alpha 1 DSM 7.1.1-42962 Update 2 - Loader version and model: ARC Loader v23.6.30 - DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP GEN8 MICROSERVER, Xeon E3 1260L - Additional comments: Rebuild the boot image to ARC Loader v23.6.30 Edited June 11, 2023 by ivankong Quote Link to comment Share on other sites More sharing options...
satdream Posted June 18, 2023 Share #34 Posted June 18, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.1-42962 Update 5 - Loader version and model: ARPL v0.5 alpha 1 DS3622xs+ => ARC Loader v23.6.36a DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Microserver Gen8 - 16Gb - Intel Xeon E3-1265L v2 2.5 Ghz - Intel NIC - SAS9202-16E-LSI - QNAP USB 3.0 Ethernet 5GbE - Additional comments: QNAP USB 3.0 Ethernet 5GbE and all 20 HDDs + 2 SSDs perfectly working Quote Link to comment Share on other sites More sharing options...
dmtg Posted June 19, 2023 Share #35 Posted June 19, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: ARC 23.6.40a DS3622xs+ DSM 7.2 64570 - Loader version and model: ARPL v1.0-beta13 DS3615xs DSM 7.1 Update 4 - Installation type: HPE Microserver Gen 8 Edited June 19, 2023 by dmtg Quote Link to comment Share on other sites More sharing options...
zsdd Posted June 25, 2023 Share #36 Posted June 25, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: ARPL v1.1-beta2a DS3622xs+, DSM 7.1.1-42962 Update 6 - Loader version and model: ARC 23.6.51 DS3622xs+, DSM 7.2 64570 Update 1 - Using custom extra.lzma: NO - Installation type: BAREMETAL - Leno M700 Tiny minipc, Pentium G4400T, 8GB RAM, 1TB Samsung 870 QVO - Additional comments: Updated via DSM GUI Edited June 25, 2023 by zsdd Quote Link to comment Share on other sites More sharing options...
TemplarB Posted June 27, 2023 Share #37 Posted June 27, 2023 (edited) - Outcome of the update: FAILED - DSM version prior update: Tcrp 9.2.x, DS3622xs+, DSM 7.0.1 - Loader version and model: Tcrp v0.9.4.9c, DS3622xs+, DSM 7.2 64570 Update 1 - Using custom extra.lzma: NO - Installation type: BAREMETAL - HPE Microserver Gen 8 - Additional comments: followed what I've read here, but got issues, details here Edited June 27, 2023 by TemplarB Quote Link to comment Share on other sites More sharing options...
WanWizard Posted June 28, 2023 Share #38 Posted June 28, 2023 - Outcome of the update: FAILED - DSM version prior update: DSM 7.1.1-42962 Update 5 - Loader version and model: tcpl v0.9.4.9c DS3622xs+ - Using custom extra.lzma: NO - Installation type: ESXi 6.5 on Supermicro X8 - Additional comments: I use the LSI2308 which is on the mainboard of the Supermicro. In DSM 6 it required mpt2sas, in DSM 7 it requires mpt3sas. If I add the extension, the build fails because there is no entry for ds3622xsp_65470 in the mpt3sas json index. If I don't add the extension, the build finishes fine, but after boot the mpt3sas kernel driver is present but not loaded, so the disks aren't present. Manually doing an "insmod /usr/lib/modules/mpt3sas.ko" fixes that, but the recovery still fails, assuming because this problem persists after the recovery reboot. I tried to figure out if I could work around that. but /etc.defaults doesn't seem to be presistent, so any fix is lost after reboot. Same for adding "supportsas" to synoinfo.conf which could also fix it. Quote Link to comment Share on other sites More sharing options...
7up_ Posted June 29, 2023 Share #39 Posted June 29, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.1-42962 Update 6 - Loader version and model: ARPL v1.1-beta2a DS918+, DSM 7.2 64570 Update 1 - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asus Q370M, i5-8500T, 8GB RAM, 3 3TB Seagate drives - Additional comments: Manual update via DSM GUI Edited June 29, 2023 by 7up_ Quote Link to comment Share on other sites More sharing options...
tahuru Posted June 30, 2023 Share #40 Posted June 30, 2023 (edited) - Outcome of the Install: SUCCESSFUL - DSM version prior to update: NON - Loader version and model arpl-i18n - DSM 7.2 64570 Update 1 using DVA1622 image. - Using custome xtra.lzma: NO - Installation type: BAREMETAL QNAP 453a 4GB RAM N3160 4x4GB Western Digital Red - Additional comments: Plex Transcoding using the iGPU WORKS! - All 4 LAN Ports are operational. Edited June 30, 2023 by tahuru Quote Link to comment Share on other sites More sharing options...
giann84 Posted June 30, 2023 Share #41 Posted June 30, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: Jun Loader - DSM 6.2.3-25426 Update 3 - Loader version and model: PeterSuh's tcrp v0.9.4.3-2 JOT, DS3622xs+, DSM 7.2 64570 Update 1 - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Proliant Gen 7 (N54L) - Additional comments: - Quote Link to comment Share on other sites More sharing options...
tdse13 Posted July 1, 2023 Share #42 Posted July 1, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: ARPL 7.1.1-42962 Update 3 - Loader version and model: PeterSuh's tcrp v0.9.4.3-2, DSM 7.2 64570 Update 1, DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asrock J4105 - Additional comments: Drive and Photos some issues after update but apparently solved Quote Link to comment Share on other sites More sharing options...
sagrotan Posted July 4, 2023 Share #43 Posted July 4, 2023 - Outcome of the update: FAILED - DSM version prior update: TRPL DSM 7.1.1-42962 Update 5 - Loader version and model: TRPL v0.9.4.3-2, DSM 7.2 64570 Update 1, DS3617xs - Using custom extra.lzma: NO - Installation type: ESXi - Microserver Gen8 - Additional comments: passtrough drives not recognized, lost Apps & Setting during rollback to 7.1.1 Quote Link to comment Share on other sites More sharing options...
Philebos Posted July 15, 2023 Share #44 Posted July 15, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior to update: loader arpl-v1.1-beta2a with DS3622xs+ DSM 7.1.1-42962 Update 6 - switched to arpl-i18n building a new loader for DS3622xs+ DSM 7.2 - migration with HDDs, all data, configurations etc. went smoothly - DSM version after update: DSM 7.2-64570 Update 1 Quote Link to comment Share on other sites More sharing options...
Benna Posted July 26, 2023 Share #45 Posted July 26, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.1-42962 UPDATE 6 - Loader version and model: ARC Automated RedPill Loader 23.7.33 - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP N54L - NIC: HP NC360T PCI-E - Additional comments: Manual update via GUI | Rebuilded loader with direct boot Edited July 26, 2023 by Benna Quote Link to comment Share on other sites More sharing options...
jdpdata Posted August 3, 2023 Share #46 Posted August 3, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.1-42962 UPDATE 6 - Loader version and model: ARC Automated RedPill Loader 23.7.38 - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP N54L - Additional comments: Manual update via GUI | Rebuilded loader with direct boot option (thanks to Benna for tip) Quote Link to comment Share on other sites More sharing options...
oshar Posted January 3 Share #47 Posted January 3 Machine 1 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1-42661 UPDATE 1 - Loader version and model: TCRP 0.9.4.9, 0.0.5j, DS3622xs+ - Using custom extra.lzma: NO - Installation type: Gen 8 Microserver with Intel Celeron G1610T and 12GB RAM - Additional comments: Auto update via GUI to 7.1.1-42962 - Outcome of the update: FAILED and then SUCCESSFUL - DSM version prior update: DSM 7.1.1-42962 - Loader version and model: TCRP 0.9.4.9, 0.0.5j, DS3622xs+ - Using custom extra.lzma: NO - Installation type: Gen 8 Microserver with Intel Celeron G1610T and 12GB RAM - Additional comments: Manual update via GUI to 7.2.1-69057 and got error that /root/config/DS3622xs+/7.2.1-69057/config.json was missing. I rebooted and error went away but no IP assigned and not visible in synology assistant or DHCP table on router. Performed the following steps to complete the upgrade. Cleanup my old pat file from USB as I didn't have enough space cd /mnt/sdf3/auxfiles rm ds3622xsp_42661.pat cd ~ Then proceed with a clean install: ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh satamap ./rploader.sh identifyusb ./rploader.sh serialgen DS3622xs+ realmac ./rploader.sh build ds3622xsp-7.2.0-64570 exitcheck.sh reboot Perform a "Recover" via the GUI and reboot - Outcome of the update: SUCCESSFUL and on latest version. Machine 2 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.1-42962 - Loader version and model: TCRP 10.0.0.0, 0.0.6, DS3622xs+ - Using custom extra.lzma: NO - Installation type: Gen 8 Microserver with Intel Pentium G2020T and 16GB RAM - Additional comments: Manual upgrade to 7.2.1-69057 via GUI Machine 3 - Outcome of the update: FAILED and then SUCCESSFUL - DSM version prior update: DSM 7.1.1-42962 - Loader version and model: TCRP 0.9.4.9, 0.0.5j, DS3622xs+ - Using custom extra.lzma: NO - Installation type: Gen 8 Microserver with Intel Xeon E31265L and 16GB RAM and WDR SSDs - Additional comments: Manual update via GUI to 7.2.1-69057 and got error that /root/config/DS3622xs+/7.2.1-69057/config.json was missing. I rebooted and error went away but no IP assigned and not visible in synology assistant or DHCP table on router. Performed the following steps to complete the upgrade. Cleanup my old pat file from USB as I didn't have enough space cd /mnt/sdf3/auxfiles rm ds3622xsp_42661.pat cd ~ Then proceed with a clean install: ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh satamap ./rploader.sh identifyusb ./rploader.sh serialgen DS3622xs+ realmac ./rploader.sh build ds3622xsp-7.2.0-64570 exitcheck.sh reboot Perform a "Recover" via the GUI and reboot - Outcome of the update: SUCCESSFUL and on latest version. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.