Jump to content
XPEnology Community

DSM 7.1.1-42962 Update 5


kutaxov
Message added by Polanskiman,

Please read the READ ME topic before posting:

 

Recommended Posts

image.thumb.png.6edb8156dea6f5193e909119635d195c.png

 

https://www.synology.com/en-global/releaseNote/DSM

 

Спойлер

Version: 7.1.1-42962 Update 5

(2023-04-12)

Important notes

Your Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to update it manually.

Your DSM is working fine without having to update. The system evaluates service statuses and system settings to determine whether it needs to update to this version.

Depending on your Synology NAS model, this update will restart the device.

Users of HD6500 can now create a Btrfs volume of up to 1 PB. This update automatically converts existing volumes that use the Btrfs (Peta Volume) file system to Btrfs. However, to create a volume larger than 200 TB, a RAID 6 storage pool and at least 64 GB of system memory are still required.

What’s New

Updated OpenSSL to version 1.1.1t to fix multiple security vulnerabilities (CVE-2023-0286, CVE-2023-0215, CVE-2022-4450, CVE-2022-4304).

Fixed Issues

Fixed an issue where users couldn't access DSM via the Bonjour service.

Fixed stability issue of QuickConnect connections.

Fixed an issue where Synology mobile apps remained signed in after users ended all connections following a password change.

Fixed an issue of space reclamation not running according to the set schedule.

Fixed a display issue concerning the notification about incompatible network interface cards.

 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42962 Update 4

- Loader version and model: ARPL v1.1-beta2a (DS920+)

- Using custom extra.lzma: NO

- Installation type: Baremetal, Gigabyte GA-H270N-Wifi, 16GB DDR4, Intel Pentium G4560, 2x4GB WD HDD

- Additional comments: Update wasn´t shown in DSM. I did it manually. It took only few minutes.

Edited by Sonnenblume
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42962 Update 4

- Loader version and model: tinycore-redpill.v0.9.4.3-2.m-shell.img DS920+

- Using custom extra.lzma: NO

- Installation type: Baremetal

- Additional comments: Updated manually .pat on panel control DSM.

Link to comment
Share on other sites

  • Polanskiman pinned, featured and unfeatured this topic

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42962 Update 4

- Loader version and model: ARPL v1.0-beta13 (DS918+)

- Using custom extra.lzma: NO

- Installation type: ESXi 7.0U3 with passthrough controller

- Additional comments: In DSM, the update was not shown, I installed it manually.

Link to comment
Share on other sites

- Outcome of the update: FAILED

- DSM version prior update: DSM 7.1.1-42962 Update 4

- Loader version and model: ARPL v1.1-beta2a (DVA1622)

- Using custom extra.lzma: NO

- Installation type: Baremetal on HP Microserver Gen8, drives using onboard SATA

- Additional comments: Manually installed Update 5 in DSM. Rebooted and found it was at Synology Web Assistant and said "No drives detected". Rebooted into ARPL and it finds the 4 drives. Tried rebuilding loader and still getting same error.

Link to comment
Share on other sites

12 hours ago, mxmx said:

- Outcome of the update: FAILED

- DSM version prior update: DSM 7.1.1-42962 Update 4

- Loader version and model: ARPL v1.1-beta2a (DVA1622)

- Using custom extra.lzma: NO

- Installation type: Baremetal on HP Microserver Gen8, drives using onboard SATA

- Additional comments: Manually installed Update 5 in DSM. Rebooted and found it was at Synology Web Assistant and said "No drives detected". Rebooted into ARPL and it finds the 4 drives. Tried rebuilding loader and still getting same error.

 

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42962 Update 4

- Loader version and model: ARPL v1.1-beta2a (DVA1622)

- Using custom extra.lzma: NO

- Installation type: Baremetal on HP Microserver Gen8, drives using onboard SATA

- Additional comments: can't figure out how to edit... I went back into ARPL to update everything and rebuilt loader. Not sure what exactly did it, but it's working now.

  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42962 Update 3 (Tinycore-Redpill v0.9.4.?)
- Loader version and model: Tinycore-Redpill v0.9.4.3 - DS3622xs+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - AsRock Rack C2550D4I

- Additional comments: Upgraded to DSM 7.1.1-42962 Update 5 via GUI & reboot to TinyCore

 

Into TC, run the follow cmds :

 

./rploader.sh fullupgrade
./rploader.sh update 
sudo ./rploader.sh postupdate ds3622xsp-7.1.1-42962 
exitcheck.sh reboot

 

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42962 Update 4
- Loader version and model: TinyCore RedPill v0.9.4.3 with Friend 0.0.4 - DS3622xs+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP ProLiant MicroServer Gen8

- Additional comments: DSM 7.1.1-42962 Update 5 via GUI (manually)

  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.1-42962 Update 4
- Loader version and model: ARPL v0.4-alpha5 DS918+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - GA-J3455N-D3H
- Additional comments: Update via GUI with PAT file from syno // onboard LAN is ok - HW transcode is ok

  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: TCRP v0.9.4.3 DS3622xs+ DSM 7.1.1-42962 Update 4

- Loader version and model: TCRP v0.9.4.3 DS3622xs+ DSM 7.1.1-42962 withfriend

- Installation type: ESX 6.5 on HPE Microserver Gen 8 with passthrough USB3 controller

Edited by m3rlin76
  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DS918+ DSM 7.1.1-42962 Update 4
- Loader version and model: TCRP v0.9.4.3 + Friend 0.0.4 DS918+
- Using custom extra.lzma: no
- Installation type: vmware Workstation 17.0.1 on top of Ryzen 7 5700X
- Additional comments: Manual update from the DSM GUI

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42962 

- Loader version and model: TCRP v0.9.4.3 with friend DS3622xs+

- Using custom extra.lzma: NO

- Installation type: VMWare Workstation

- Additional comments: Manual from GUI

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.1-42962 Update 4
- Loader version and model: ARPL v1.1-beta2a (DS920+)
- Using custom extra.lzma: no
- Installation type: vmware Workstation 17.0.1 on top of Ryzen 7 5700X
- Additional comments: Manual update from the DSM GUI

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42692 Update 4

- Loader version and model : Automated RedPill Loader ARPL 1.1-beta2a - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MB: ASUS Z170I Pro Gaming / CPU: G4620

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42692 Update 4

- Loader version and model : Automated RedPill Loader ARPL 1.1-beta2a - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MB: Asrock J3355B-ITX

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42692 Update 4

- Loader version and model : Automated RedPill Loader ARPL 1.1-beta2a - DS3622xs+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MB: Gigabyte GA-B75M-D3V / CPU: G840

 

- Additional comment: Updated via DSM GUI - update was shown, loaded and installed it

- Additional comment: Just after DSM update I've got an Active Backup for Business update notification, so I've updated it as well

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42692 Update 4

- Loader version and model : Automated RedPill Loader ARPL 1.1-beta2a - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MB: Asus Z97 Pro

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42692 Update 4

- Loader version and model : Automated RedPill Loader ARPL 1.1-beta2a - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MB: Asus Z170 Pro


Notes: Both systems run additional Intel X520 SFP+ Cards, and one contains a Marvel 4port Sata expander. No issues with either
Updated via Syno CP GUI.

Link to comment
Share on other sites

 Outcome of the update: SUCCESSFUL

- DSM version prior update: tinycore-redpill v0.9.4.0 DS3622xs DSM 7.1.1-42962 Update 4 withfriend

- Loader version and model: tinycore-redpill v0.9.4.0 DS3622xs DSM 7.1.1-42962 Update 5 withfriend

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP EliteDesk 705 G3

- Additional comments: Updated Via DSM GUI

Edited by davido31
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42962 Update 4

- Loader version and model: TCRP 0.9.4.3

- Using custom extra.lzma: NO

- Installation type: Baremetal

- Additional comments: In DSM, the update was not shown, I installed it manually and run post update commands

Edited by Trabalhador Anonimo
Type correction
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42692 Update 4

- Loader version and model : Automated RedPill Loader ARPL 1.1-beta2a - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Z390M Pro4 - i5-9500

- Additional comments: Updated via DSM GUI

Edited by Fulatins
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.1-42962 Update 1
- Loader version and model: Tinycore-Redpill v0.9.4.3 - DS3622xs+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - Fatal1ty B450 Gaming-ITX/ac
- Additional comments: Upgraded to DSM 7.1.1-42962 Update 5 via GUI manually & rebooted to TinyCore for loader updates

./rploader.sh update
./rploader.sh fullupgrade
./rploader.sh backup
./rploader.sh postupdate ds3622xsp-7.1.1-42962
exitcheck.sh reboot

Edited by johnnydunlop
Link to comment
Share on other sites

 Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42692 Update 4

- Loader version and model : Automated RedPill Loader ARPL 1.1-beta2a - DS3622xs+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MB: ASUS P5Q Deluxe / CPU: Q6600

 

- Additional comment: Updated via DSM GUI - update was shown, loaded and installed it

Edited by ikofen
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.1-42962 Update 4
- Loader version and model: Automated Redpill Loader 0.4 alpha 11  DS920+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - Asrock J4105
- Additional comments: Manually downloaded PAT & installed via Web UI.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42692 Update 4

- Loader version and model : Automated RedPill Loader ARPL 1.1-beta2a - DS918+

- Using custom extra.lzma: NO

- Installation type: Proxmox VE 7.4

 

- Additional comment: Updated via DSM GUI - update was shown on WebUI and triggered the update from there.

  • Thanks 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.1-42962 Update 4
- Loader version and model: ARPL v1.1-beta2 (DS3622xs+)
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - ASRock J4125
- Additional comments: Updated via DSM GUI

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42962 Update 4
- Loader version and model: ARPL v1.1-beta2 - DVA1622
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - FUJITSU D3417-B21 GS2; Intel Core i5-7500T; 8GB DDR4; 2x4TB HDD

- Additional comments: Updated via DSM GUI

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...