Jump to content
XPEnology Community

DSM 7.x Proxmox Backup Template


timonych

Recommended Posts

Hi Everyone!

 

Due to DSM 6.x Proxmox Backup Template I have made a clean backups for several Xpenology installations on Proxmox.

All installation was made via Automated Redpill Loader by fbelavenuto.

 

Download Link --------------->>>>>  https://mega.nz/folder/42RmGBgR#GPZIL371zNE3uTt14CmY2A

 

WARNINGS!

  • DO NOT TRY TO UPDATE FROM 6.x to 7.x WITHOUT FULL BACKUP!
  • DO NOT TRY TO UPDATE 7.x to NEW VERSIONS WITHOUT FULL BACKUP!

 

How to use this backups:

  1. Choose the correct platform according to the table from this topic: DSM 7.x Loaders and Platforms
  2. Download backup
  3. Put this backup to Your BACKUP STORAGE in Proxmox (e.g. local -> /var/lib/vz/dump)
  4. Open WEB UI
  5. Open STORAGE in WEB UI
  6. Choose the backup which has been downloaded
  7. Click on Restore
  8. NECESSARILY! Choose the storage where backup will be restored. (e.g. local)

 

There are some several important points:

  1. TWO Network Interfaces. First NIC is disabled. It has been done because for DSM first device must be with suitable MAC which is fixed in Grub. If You need multiple instance of DSM (as me) - it's costly to mofidy everytime Grub. So Second NIC uses any MAC address from Proxmox.
  2. TWO Hard Disk Drives. Firsk disk - is bootable disk made by Automated Redpill Loader! Don't try to use is as Storage. (maybe it's painfully, I haven't checked). Second Drive - it's a System Drive where was DSM has already installed. 
  3. Second drive capacity - 11 GB! All space of this driver is gone for Synology DSM Firmware. 
    You can extend this partition or create a new Hard disk's for making a Storage pool.
  4. Boot Drive - Sata0 (where loader is installed).

 

Implemented addons:

  • DS3622xs+ ->
    • misc
    • powersched
    • 9p
    • acpid
  • DS918+ ->
    • i915-8th
    • i915-10th
    • misc
    • powersched
    • 9p
    • acpid
  • DVA1622 ->
    • i915-10th
    • misc
    • powersched
    • 9p
    • acpid
  • DVA3221 -> 
    • misc
    • powersched
    • 9p
    • acpid

 

Big thanks to:

 

Some screenshots:

DS918+

ds918p.thumb.png.4533ffedd6694862d0223476004ef147.png

 

DS3622xs+

ds3622xsp.thumb.png.8811b64b2161cf6378801f83fcf5c5e2.png

 

DVA1622

dva1622p.thumb.png.999fba0fec92e037038be16d2c888954.png

 

DVA3221

dva3221.thumb.png.fdfb871458773768ee466b3623183ecd.png

Edited by Polanskiman
Edited link at OP's request
Link to comment
Share on other sites

  • 4 months later...
11 minutes ago, hiliger84 said:

hello all, is there a backup of version 7.2?

 

Hello,

 

i'm not using 7.x because of it's overhead with disk usage.

By the way, I try to make backups with 7.2.x if You need it :) (please, confirm it)

Edited by timonych
  • Thanks 1
Link to comment
Share on other sites

5 minutes ago, timonych said:

 

Hello,

 

i'm not using 7.x because of it's overhead with disk usage.

By the way, I try to make backups with 7.2.x if You need it :) (please, confirm it)

thank you very much, yes I am interested in 7.2 if possible.

Currently I use 7.1.1

 

I don't understand, what's the problem with 7.1?

Edited by hiliger84
Link to comment
Share on other sites

On 5/15/2023 at 4:56 PM, hiliger84 said:

thank you very much, yes I am interested in 7.2 if possible.

Currently I use 7.1.1

 

I don't understand, what's the problem with 7.1?

 

Hello, @hiliger84 !

 

Have checked latest loaders - ARPL and TinyCore - There is not currently support versions 7.2.x.

 

About problem with 7.x - high resource usage for me. (hdd, cpu, ram).

Link to comment
Share on other sites

  • 3 months later...
  • 4 weeks later...
  • 2 months later...
Posted (edited)

Great work, i am using it for some time but i have an interesting issue. When rebooted, sometimes the vm gets stuck with 100% cpu usage and i need to restart it 1-2 times before it works. Any chance for a solution?

 

Im using it with a nuc, on a proxmox vm for ds918+.

Edited by robertpoche
Link to comment
Share on other sites

  • 2 months later...

Hi

I'm triying this template (918p) but i can't connect with the vm

My Proxmox version is 8.1.4

I have restored the backup, And I have reserved an static IP in my router for the MAC of second nic, when I start the vm I show the loader getting the correct IP that I have reserved, but when I try to open the web GUI with the IP:5000 it doesn't connect.

 

I lauched a ping to the IP reserved, when vm is starting and get the IP the ping answer correctly 3 packets but then the follow packets losts. I have no idea why is this behaivour, I haven't firewall so.......

 

Any ideas

I tried changeing VirtiO for e1000 but I get the same problem

 

Sorry for my poor english, I'm spanish

Edited by enrgarc
Link to comment
Share on other sites

В 23.03.2024 в 20:44, enrgarc сказал:

Hi

I'm triying this template (918p) but i can't connect with the vm

My Proxmox version is 8.1.4

I have restored the backup, And I have reserved an static IP in my router for the MAC of second nic, when I start the vm I show the loader getting the correct IP that I have reserved, but when I try to open the web GUI with the IP:5000 it doesn't connect.

 

I lauched a ping to the IP reserved, when vm is starting and get the IP the ping answer correctly 3 packets but then the follow packets losts. I have no idea why is this behaivour, I haven't firewall so.......

 

Any ideas

I tried changeing VirtiO for e1000 but I get the same problem

 

Sorry for my poor english, I'm spanish

Faced with absolutely same issue at 8.1.4 proxmox too (running on hp microserver gen8)

 

Got working case only with ds3622xsp image with changes in vm config - net0 enabled and machine type - q35.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...