Jump to content
XPEnology Community

Drivers requests for DSM 5.2


Recommended Posts

Hi.

 

I am trying to install XPEnology on a N3150-ITX, but I cannot make it even boot. It gets stuck in "Loading zImage OK".

 

From http://download.xpenology.fr I have tried:


  • XPEnoboot_DS3615xs_5.1-5055.1.img
    XPEnoboot_DS3615xs_5.2-5565.2.img
    XPEnoboot_DS3615xs_5.2-5592.2.img

 

From http://xpenology.pety.me/ I tried an old NanoBoot. It also loads the zImage and gets stuck at "ready". It does not boot either.

 

  • NanoBoot-5.0.4.1-fat.img

 

FreeNAS 9.3.1. boots correctly (with xhci_load flag enabled). I also tested successfully the RAM memory with MemTest86. All images boot correctly in VirtualBox.

 

In the General Discussion section, somebody said that there could a problem with some missing drivers.

 

Please, tell me how to proceed to give you as many details/data as possible to make it work.

 

Thank you in advance.

Link to comment
Share on other sites

Hi.

 

I am trying to install XPEnology on a N3150-ITX, but I cannot make it even boot. It gets stuck in "Loading zImage OK".

 

From http://download.xpenology.fr I have tried:


  • XPEnoboot_DS3615xs_5.1-5055.1.img
    XPEnoboot_DS3615xs_5.2-5565.2.img
    XPEnoboot_DS3615xs_5.2-5592.2.img

 

From http://xpenology.pety.me/ I tried an old NanoBoot. It also loads the zImage and gets stuck at "ready". It does not boot either.

 

  • NanoBoot-5.0.4.1-fat.img

 

FreeNAS 9.3.1. boots correctly (with xhci_load flag enabled). I also tested successfully the RAM memory with MemTest86. All images boot correctly in VirtualBox.

 

In the General Discussion section, somebody said that there could a problem with some missing drivers.

 

Please, tell me how to proceed to give you as many details/data as possible to make it work.

 

Thank you in advance.

 

Did you try on USB2 ports instead of USB3 ?

Try to boot in debug mode and/or remove loglevel=0 from boot command line (in syslinux.cfg or grub console) in order to show more informations.

Link to comment
Share on other sites

 

Did you try on USB2 ports instead of USB3 ?

Try to boot in debug mode and/or remove loglevel=0 from boot command line (in syslinux.cfg or grub console) in order to show more informations.

 

Hi.

 

Thanks for the reply.

 

I tried with a USB 2.0 pendrive in both USB2 and USB3 ports, but it did not boot from any.

 

I have also tried NanoBoot-5.0.3.1-fat.img

 

If I select debug mode, after the dots and the "ready", "early console in setup code" appears, and it hangs there.

 

Firstly, I thought it could be VGA related, so I used vga=ask instead of vga=0x305, but nothing happens. It hangs anyway, even without the prompt which let you list and choose the desired vga mode. (I saw what should appear with the vga=ask by booting it in VirtualBox. There, it works perfectly).

 

I tried "ubuntu-15.10-desktop-amd64.iso". It boots in UEFI mode perfectly and works correctly. If you want, I can post a dmesg.

 

What else do you want me to try?

 

Thanks.

Link to comment
Share on other sites

USB 3.0 ports with ASMedia ASM1074 hub not working properly.It freezing the whole system.

http://forum.asrock.com/forum_posts.asp ... inux-error

 

In this forum the guy wrote that he have issues with Ubuntu 15.10 Server x64 and dml33 haven't.

 

I tried "ubuntu-15.10-desktop-amd64.iso". It boots in UEFI mode perfectly and works correctly. If you want, I can post a dmesg.

 

The current solution for my problem is to compile an current kernel without UAS support. 
(Older ASMedia Chips get detected by the kernel driver and uas is disabled automatically). 
Resulting in massive performance loss.

Link to comment
Share on other sites

Hi.

 

I finally made it work by connecting it DVI-DVI to a different monitor.

 

What resolution uses Xpenoboot? Just after decompressing the zImage and booting up, when Xpenoboot label is displayed and everything is detected.

 

There must be a handshake problem regarding the resolution/video driver when I was connecting it to a 720p TV HDMI-HDMI or HMDI-DVI to a LG 19'' Wide-screen 1440x900. It hung all the time.

 

Anyway, it would be nice if Xpenoboot could boot anyway so, in case of a problem in that phase, could use a VESA safe resolution or the exception could managed somehow so the booting process continued.

 

Ah, I used a USB 2.0 pendrive and it worked flawlessly in all USB3 and USB2 ports.

 

Regards.

Link to comment
Share on other sites

Hi,

 

Excuse me for duplicate posting (viewtopic.php?f=2&t=5026&start=1670#p51762).

 

I only like to request for include all LVM drivers. These are missing at time: dm-log.ko; dm-region-hash.ko; dm-mirror.ko

 

Thank you!

 

Duplicated yes :mrgreen:

 

Drivers to make the built in wifi card of the GA-H97N-WIFI motherboard work possible?
My ASUS USB-N16 in the Synology Compatibility list not run ...

 

For the moment we are focus on fixing bugs like iscsi, Time Backup, VirtualBox, Poweroff by button...

Next we will focus on wifi and dvb support :smile:

Link to comment
Share on other sites

 

Drivers to make the built in wifi card of the GA-H97N-WIFI motherboard work possible?

 

For the moment we are focus on fixing bugs like iscsi, Time Backup, VirtualBox, Poweroff by button...

Next we will focus on wifi and dvb support :smile:

 

Good to know it's on track. I would hate to cash out for a good wifi dongle when my mobo already has one built in wifi card.

 

If there is anything I could to do to help speed up the process, please let me know.

 

Cheers and thanks.

Link to comment
Share on other sites

Please, don't forget USB to serial FTDI and Prolific chips:

ftdi_sio.ko

pl2303.ko

usbserial.ko

 

Thanks a lot for your good work. :smile:

 

All of these modules are already present but not loaded at boot. You have just to insmod it.

What kind of hardware did you use with serial port ?

Link to comment
Share on other sites

Hi,

 

I have two requests for you.

The first one:

Please add NVMe driver to the kernel. I bought a Samsung 950 NVMe M.2 SSD and I want to use it as SSD Cache in my server.

As I know, Linux kernel supported NVMe drives since v3.1

 

And the second one:

Could you please set mpt3sas.ko modul as default loaded modul? And please update it to the latest version v11 (if is it not so, unfortunately there is no "modinfo" command in BusyBox)

I had already 2 times after reboot, that DSM see only 2 drives of 3. In this case I need to reboot, and after that it's OK. It can be, that insmod mpt3sas.ko working not properly or the driver version is older and not compatible with my firmware. I'm using the latest firmware v10 on my LSI 9300-8i card.

 

In this zip can be found the latest driver source:

http://docs.avagotech.com/docs/Linux-Driver-RHEL5-6_SLES10-11_P10.zip

 

Thanks a lot! :smile:

Link to comment
Share on other sites

Please, don't forget USB to serial FTDI and Prolific chips:

ftdi_sio.ko

pl2303.ko

usbserial.ko

 

Thanks a lot for your good work. :smile:

 

All of these modules are already present but not loaded at boot. You have just to insmod it.

What kind of hardware did you use with serial port ?

 

Yes, I run a script to insmod drivers and get some other conditions from some years ago. Before Xpenology included drivers I had to compile them every time kernel was changed. Now, I don't waste time thanks to you... :smile:

Hardware: Marmitek CM11 (legacy X10 transceiver)

Home automation personal system: heyu ipkg + http://domus.link.co.pt/

Link to comment
Share on other sites

Trantor, I think the driver for Synology E10G15-F1 10G are missing the the current DS3615xs5.2-5644.4 release, which they the drivers as the card is working well DS3615xs 5.1-5055.1 and are still mentioned here http://xpenology.me/compatible/. I think the Synology NIC is a second source of this one: http://www.tehutinetworks.net/?t=LV&L1=3&L2=0&L3=0&L7=5 and it's drivers are part of the LINUX kernel, which I confirmed with installing Debian 8.

 

Regards, Werner

Link to comment
Share on other sites

What about VirtIO drivers?

 

i mean virtio harddrive drivers etc

 

I wish to use xpenology with my virtual machine but i cannot mount over 4 devices with ide drivers

 

but i try to use virtio then xpenology cannot find any drives/disks

 

thnx!

 

I'm interested in too!!

Actually, the drivers ARE present and loaded at boot. In fact you can find your drives in /dev/vd(x) but the dsm won't recognize them.

 

By the way, thanks to XPenology Team for the awesome job they do!

Link to comment
Share on other sites

Trantor, I think the driver for Synology E10G15-F1 10G are missing the the current DS3615xs5.2-5644.4 release, which they the drivers as the card is working well DS3615xs 5.1-5055.1 and are still mentioned here http://xpenology.me/compatible/. I think the Synology NIC is a second source of this one: http://www.tehutinetworks.net/?t=LV&L1=3&L2=0&L3=0&L7=5 and it's drivers are part of the LINUX kernel, which I confirmed with installing Debian 8.

 

Regards, Werner

 

This is strange because if I'm right the Synology E10G15-F1 10G adapter is supported by the tn40xx driver which is included and loaded on 5.2-5644 builds.

Link to comment
Share on other sites

Hi Trator,

 

could you please compile the driver for the D-Link DXE-820T (dualport 10G copper nic)...

i got some cheap so i think about using them..

 

the official package can be downloaded finalle from here

 

ftp://ftp.dlink.de/dxe/dxe-820t/driver_ ... 160122.zip

 

thx

snoopy78

 

The driver provided in this package is the broadcom bnx2x driver v1.710.39 (2014/06/02).

The version of bnx2x driver in XPEnoboot is v1.78.17-0 (2013/04/11).

We need to update it to the latest version v1.713.02 (2015/11/02) but broadcom bnx2 and bnx2x are little touchy to update :geek:

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...