stanza Posted January 2, 2014 Share #226 Posted January 2, 2014 After some testing I found "something":Without sas/scsi controller (just sata drives) I have want_idx messages when a least 2 disks are connected. No matter the dsm version, messages starts with 2 disks, with one disk no message. In my DS412+ system sleep 10sec for each disk at boot. The want_idx messages are generated by the sd_probe function in sd.c: A while function compare index and want_idx while an autoincrement value is < 15. According to the info in source code, this is used to be sure that the scsi drive is ready. I will try to comment out this while function and/or decrease the value (like 3 or 4). Funny thing is With the older SAS card 1068E chipset it works fine eg when I try S5000PSL Motherboard (which has 6 onboard SATA) 4gb ram HP SC44Ge card, hooked to a 6bay SAS expander backplane containing 6 x 450Gb 15K SAS Drives......with no drives attached to SATA controller at all Can install, configure and it survives a reboot fine System is quite happy, just a bit slow to boot with the want_idx errors SMART works Can't configure the write caching......but watching the logs it's enabled anyway So with me, it's only the later cards giving me trouble . Link to comment Share on other sites More sharing options...
Trantor Posted January 2, 2014 Author Share #227 Posted January 2, 2014 @stanza : can you test with your mpt2sas based controllers with only 2-3 disks In my tests I only use 2-3 disks with my LSI 9211-4i. @Eduardo and Danyz : I will repost all usb related modules compiled with v4. Other USB devices: USB to serial FTDI. What about it ? @didlawowo : When you insmod usbnet/ insmod ax88179, does the ifconfig see something ? Any messages in the xpenology console ? @hawie : powernow-k8 module is already included. Try to insmod it Link to comment Share on other sites More sharing options...
cyberdott Posted January 2, 2014 Share #228 Posted January 2, 2014 Hello I Use the Dell Perc H310 (with 4xSAS Disk´s attached) on N54L without any Problem (DSM 4.3 / synoboot-3810-pre-v1.1_v4): root@cyberdisk:/opt/MegaRAID/MegaCli# ./MegaCli -AdpAllInfo -aAll Adapter #0 ============================================================================== Versions ================ Product Name : PERC H310 Adapter Serial No : 2BG09EO FW Package Build: 20.10.2-0002 Mfg. Data ================ Mfg. Date : 11/19/12 Rework Date : 11/19/12 Revision No : A00 Battery FRU : N/A Image Versions in Flash: ================ BIOS Version : 4.29.00_4.12.05.00_0x05110000 Preboot CLI Version: 03.02-015:#%00008 Ctrl-R Version : 3.00-0020 NVDATA Version : 3.09.03-0038 FW Version : 2.120.14-1504 Boot Block Version : 2.02.00.00-0001 Link to comment Share on other sites More sharing options...
stanza Posted January 3, 2014 Share #229 Posted January 3, 2014 Hmmm thats weird Doing the testing for you Trantor with the H200 card I made a mistake and used synoboot-trantor-4.2-3211-v1.2.img instead of synoboot-3810-pre-v1.1_v4.img Machine booted really quick found all 6 drives quickly, no want_idx errors at all Naturally I couldn't install the XPEnology_trantor_v1.0_DSM_DS3612xs_3810.pat file but I was amazed how fast it found the controller / drives anyways, on with the testing Link to comment Share on other sites More sharing options...
Danyz Posted January 3, 2014 Share #230 Posted January 3, 2014 Hi Danyz, Your photo is small. Please, read my previous post. Do you have any UPS plugged to the NAS? Hi, you was right, XPEnology boots without any problem if the UPS is unplugged. I tried to connect the UPS after syno has (properly) booted, got the same error message ("fixing recursive...") and XPEnology freeze... Link to comment Share on other sites More sharing options...
Eduardo Posted January 3, 2014 Share #231 Posted January 3, 2014 @Eduardo and Danyz :I will repost all usb related modules compiled with v4. Other USB devices: USB to serial FTDI. What about it ? Hi Trantor, I really don't think the problem has to do with FTDI. In fact, the adapter works fine. Link to comment Share on other sites More sharing options...
stanza Posted January 3, 2014 Share #232 Posted January 3, 2014 ARGH!!! I have got this sorted if I can just work out Binary found something interesting. You you change the sections of /etc.defaults/synoinfo.conf internalportcfg= esataportcfg= usbportcfg= Whilst the system is up and going and the storagemanager (Both volume and HDD Management) will change "on the fly" so now my problem is What do I set internalportcfg= usbportcfg= both too? eg I have 9 USB ports and 22 Internal ports what hex code to I use for each? **update** OK I have tried the following esataportcfg="0x00000" usbportcfg="0xf300000" internalportcfg="0xcfffff" 0000 0111 1111 1100 0000 0000 0000 0000 0000 = 0xf300000 = 9? 0000 0000 0000 0011 1111 1111 1111 1111 1111 = 0xcfffff =22? And I can get all drives up... but it also brings up the boot USB key...and logs errors about smart temps seems like it wants the internal drives to come 1st...then the USB ports (in the binary count) as if I do it the other way around eg 0000 0000 0000 0000 0000 0000 0001 1111 1111 = 0x1ff = 9? 0000 0111 1111 1111 1111 1111 1110 0000 0000 = 0x7ffffe00 =22? all drives dissapear . Link to comment Share on other sites More sharing options...
stanza Posted January 3, 2014 Share #233 Posted January 3, 2014 (edited) WooHoo Got it all working 15 x 1TB SATA Drives connected to 2 x 8 port SAS controllers (Dell H200 + Dell H310) setup as a SHR2 Volume Survives a reboot . Edited January 4, 2014 by Guest Link to comment Share on other sites More sharing options...
Trantor Posted January 3, 2014 Author Share #234 Posted January 3, 2014 WooHoo Got it all working 15 x 1TB SATA Drives connected to 2 x 8 port SAS controllers (Dell H200 + Dell H310) setup as a SHR2 Volume Survives a reboot . Wow ! This is very nice Can you give us more informations about your settings ? Did you change the maxdisks (default 12) parameter in synoinfo.cfg ? What about want_idx messages ? Link to comment Share on other sites More sharing options...
stanza Posted January 4, 2014 Share #235 Posted January 4, 2014 Wow ! This is very nice Can you give us more informations about your settings ? Did you change the maxdisks (default 12) parameter in synoinfo.cfg ? What about want_idx messages ? Made a new thread here http://xpenology.com/forum/viewtopic.php?f=2&t=2028 . Link to comment Share on other sites More sharing options...
8902044 Posted January 7, 2014 Share #236 Posted January 7, 2014 Dear Trantor, I have tested synoboot-3810-pre-v1.1_v4.7z in hyper-v. It can boot sucessfully,but I can not search 3810 with SA. Can you confirm wheather if it support hyper-v? Link to comment Share on other sites More sharing options...
Next Posted January 9, 2014 Share #237 Posted January 9, 2014 How to add the extra modules? Do you have to make a new .pat file? Kind regards, Link to comment Share on other sites More sharing options...
thommy86 Posted January 10, 2014 Share #238 Posted January 10, 2014 Hello, I have a Abit IP35 Motherboard.. With the USB in the pc, it get stuck on first screen.. Is there a driver avalible for this motherboard? Link to comment Share on other sites More sharing options...
iaflyer Posted January 11, 2014 Share #239 Posted January 11, 2014 Please add driver for Realtek 8110SC (onboard LAN in gigabyte GA-G41M-ES2H) Anyone manage to use it? -Roei I post the modified r8169 driver (http://xpenology.trantor.be/beta/r8169.ko) which will handle your network card. Will be included in next repack. I have a different MB, but it needs the same driver - has it been included in the repack yet? Thanks for all your work - it's a great help! Link to comment Share on other sites More sharing options...
Jordanie Posted January 11, 2014 Share #240 Posted January 11, 2014 Hi, first thanks of your work I use a Asus H87I-PLUS Mainboard and the last xpenology 4.3. If i activate the power up on pcie event (WOL) and shutdown the system over xpenology shutdown button the system goes down und aver 1-2 second it start up again. Is this a driver problem ? thanks forr feedback and see you Link to comment Share on other sites More sharing options...
hawie Posted January 12, 2014 Share #241 Posted January 12, 2014 ... @hawie : powernow-k8 module is already included. Try to insmod it Yes, It works like a charm! thanks a lot!!! Another request, would you please add AR8161 NIC support? common MBs with this IC, mine is Gigabyte Z77-DS3H. lspci: 1969:1091 Atheros Communications AR8161 Gigabit Ethernet ref linux source: http://www.linuxfoundation.org/collabor ... orking/alx regards. Link to comment Share on other sites More sharing options...
chanyork Posted January 12, 2014 Share #242 Posted January 12, 2014 Hi, first thanks of your work I use a Asus H87I-PLUS Mainboard and the last xpenology 4.3. If i activate the power up on pcie event (WOL) and shutdown the system over xpenology shutdown button the system goes down und aver 1-2 second it start up again. Is this a driver problem ? thanks forr feedback and see you Happens same to me. when activate power up on pcie event (WOL) and shutdown it restart after 1-2 seconds. have Asus H87I-PLUS as well. Inaddition the Hard Disk does not seem to go into hibernation. Please help. Link to comment Share on other sites More sharing options...
Trantor Posted January 14, 2014 Author Share #243 Posted January 14, 2014 Another request, would you please add AR8161 NIC support? lspci: 1969:1091 Atheros Communications AR8161 Gigabit Ethernet v1.0 already include this driver: Add ATHEROS alx driver (Qualcomm Atheros AR816x/AR817x support) I have a different MB, but it needs the same driver (r8169)- has it been included in the repack yet? Yes patched r8169 driver is included since beta 1.1_v3 v1.1_v3.7z and v1.1_v4 are crashing when booting my N54L with APC Back-UPS RS 550GI or when plugging the UPS if the N54L is running yet . All the xpenology prior versions worked like a charm. My mistake is to only put the kernel in my betas and not the modules associate to it, so modules are not always compatible. I will upload updated usb modules soon. Same thing for CIFS (mount point.) Must investigate for iscsi as it's works in v1.0 on my test system. Link to comment Share on other sites More sharing options...
dj55 Posted January 14, 2014 Share #244 Posted January 14, 2014 Hello, My drivers request : TP-Link TG-3269 Réseau Carte 1000 MBit PCI http://www.linux-hardware-guide.com/fr/ ... 0-mbit-pci I testing with XPEnology DS3612xs DSM 4.3 build 3810++ (repack v1.0) XPEnology DS3612xs DSM 4.2 build 3211++ (repack v1.2) no network found with synology assistant, i test with integrated network (10/100) all work My config : ASRock AD2550B-ITX With Atom CPU 8 Gb 1*2.5 To Thanks Link to comment Share on other sites More sharing options...
Trantor Posted January 14, 2014 Author Share #245 Posted January 14, 2014 @dj55 : Try with beta version (patched r8169 driver included) : http://xpenology.trantor.be/beta/ Link to comment Share on other sites More sharing options...
yuhdiing Posted January 14, 2014 Share #246 Posted January 14, 2014 hi Trantor: Today I test my new MB and system. MB:B85M-itx WOL can't work after the system power off by xpenology. ds finder and router the same problem. If I pull out the power cable from pc , wol can work by both. this is new Mb problem. Please take it as your reference @dj55 : Try with beta version (patched r8169 driver included) : http://xpenology.trantor.be/beta/ Link to comment Share on other sites More sharing options...
dj55 Posted January 14, 2014 Share #247 Posted January 14, 2014 @dj55 : Try with beta version (patched r8169 driver included) : http://xpenology.trantor.be/beta/ Thanks for reply a download not work error 410 gone Link to comment Share on other sites More sharing options...
Eduardo Posted January 14, 2014 Share #248 Posted January 14, 2014 v1.1_v3.7z and v1.1_v4 are crashing when booting my N54L with APC Back-UPS RS 550GI or when plugging the UPS if the N54L is running yet . All the xpenology prior versions worked like a charm. My mistake is to only put the kernel in my betas and not the modules associate to it, so modules are not always compatible. I will upload updated usb modules soon. Same thing for CIFS (mount point.) Must investigate for iscsi as it's works in v1.0 on my test system. Hi Trantor, Take you time! We're not in a rush. Your work is very much appreciated. Thank you. Link to comment Share on other sites More sharing options...
dj55 Posted January 14, 2014 Share #249 Posted January 14, 2014 @dj55 : Try with beta version (patched r8169 driver included) : http://xpenology.trantor.be/beta/ Thanks for reply a download not work error 410 gone Very thank Beta version work correctly for the moment and my ethernet pci card work correctly 1Gb Link to comment Share on other sites More sharing options...
bjaguar33 Posted January 16, 2014 Share #250 Posted January 16, 2014 Hey I'm planning to use the following hardware: Motherboard: GIGABYTE GA-Z87MX-D3H RAID Controller: LSI MegaRAID SAS 9341-8i H.D.D: HGST Deskstar NAS 3.5-Inch 4TB (8 drives) SSD: Corsair Force Series GS CSSD-F360GBGS-BK (Directly attached to board) NIC: Intel PWLA8494GT PRO/1000 GT I'm wondering if this hardware will work with DSM 4.3 Thank you Link to comment Share on other sites More sharing options...
Recommended Posts