neonflx Posted December 9, 2013 Share #151 Posted December 9, 2013 you have to mount the .img file whic varies depending on what OS you use, I use debian and is fairly easy to mount the .img there once is mounted then you have to go to the folder a replace the files Link to comment Share on other sites More sharing options...
Supme Posted December 10, 2013 Share #152 Posted December 10, 2013 Please add kvm virtio drivers http://www.linux-kvm.org/page/Virtio Link to comment Share on other sites More sharing options...
Supme Posted December 10, 2013 Share #153 Posted December 10, 2013 is the fix for the scsi/hba near? Not my priority for now. We must investigate further to find out why DSM do not detect drives attached to scsi/sas controller at boot and prevent us to install DSM on them Please help. in 4.3 don't work my lan card TP-LINK TG-3269, 4.2 yes. Y?I need driver for wifi TP-LINK TL-WDN4800. For your network card based on a realtek chip, I modified the embedded r8169 driver (remove r8168 support from it to prevent conflict with the included r8168) : http://xpenology.trantor.be/beta/r8169.ko Copy it to modules folder, insmod it, and type : ifconfig ethX up (where X is the network card number, ie ; eth0, eth1 ...) I run XPEnology in a KVM virtual machine managed through virt-manager, but I noticed that some things are not working. I will add more drivers for KVM / virtio / virtualization support Sorry... Link to comment Share on other sites More sharing options...
oskarw Posted December 10, 2013 Share #154 Posted December 10, 2013 Cadre, Can you share steps on how you got pata_legacy working on your intel ss4200. I've got one running with DSM 4.2 on USB but if I could do it on PATA interface that would be stop me from pressing reset button for every reboot. Link to comment Share on other sites More sharing options...
wilmardo Posted December 10, 2013 Share #155 Posted December 10, 2013 I run XPEnology in a KVM virtual machine managed through virt-manager, but I noticed that some things are not working. I will add more drivers for KVM / virtio / virtualization support Awesome! Thanks mate! Link to comment Share on other sites More sharing options...
cyho Posted December 11, 2013 Share #156 Posted December 11, 2013 I need TP-Link TL-WN722N & Buffalo WLI-UC-GNM wifi driver, which are worked on DSM 4.2 Thanks! Link to comment Share on other sites More sharing options...
Trantor Posted December 11, 2013 Author Share #157 Posted December 11, 2013 Today I test XPEnology on an "old" DELL Optiplex 745 which have the press stop button warning issue (solved by k3dt with new synobios.ko). On this computer I put my fuck*ng DLINK DGE-528T which is not working on my test computer (ASUS P5KPL-AM SE, IRQ issues ). insmod my brand new r8169.ko module (link fews post above) and voila No conflict between r8168 and r8169. All network cards based on realtek chip which are not working with the r8168 driver will work with this one. This will of course be included in v1.1. Link to comment Share on other sites More sharing options...
XPEH Posted December 11, 2013 Share #158 Posted December 11, 2013 I use DELL Optiplex 755 for some builds. Much better compatibility and no issues with most of the builds from previous or current versions. Link to comment Share on other sites More sharing options...
cadre Posted December 11, 2013 Share #159 Posted December 11, 2013 Cadre, Can you share steps on how you got pata_legacy working on your intel ss4200. I've got one running with DSM 4.2 on USB but if I could do it on PATA interface that would be stop me from pressing reset button for every reboot. The steps are exactly the same, except instead of the USB drive for the synoboot image, I'm using an 8gb DOM in the PATA port, along with a minimum of two sata disks of course. My primary workstation is windows, so using an older computer I simply connected the IDE DOM to a controller and wrote the synoboot image with http://m0n0.ch/wall/downloads/physdiskwrite-0.5.2-PhysGUI-bundle.zip. And most importantly use Trantor's latest version of http://xpenology.trantor.be/beta/synoboot-3810-pre-v1.1_v2.7z that includes the pata_legacy module in the boot image. Write the image to the DOM, remove and place in the Intel ss4200, make sure the PATA hard drive is the first boot device in the bios (which should be default with this system anyway) and power it on, and you should be golden; many thanks to Trantor. Link to comment Share on other sites More sharing options...
xhitmanx Posted December 12, 2013 Share #160 Posted December 12, 2013 Hello I have an Dell T1500 with Intel® H57 Chipsatz plz make a driver thx Link to comment Share on other sites More sharing options...
brauner Posted December 12, 2013 Share #161 Posted December 12, 2013 Please add driver for Realtek 8110SC (onboard LAN in gigabyte GA-G41M-ES2H) Anyone manage to use it? -Roei Link to comment Share on other sites More sharing options...
Trantor Posted December 12, 2013 Author Share #162 Posted December 12, 2013 Please add driver for Realtek 8110SC (onboard LAN in gigabyte GA-G41M-ES2H) Anyone manage to use it? -Roei I post the modified r8169 driver (http://xpenology.trantor.be/beta/r8169.ko) which will handle your network card. Will be included in next repack. Link to comment Share on other sites More sharing options...
stelle007 Posted December 12, 2013 Share #163 Posted December 12, 2013 Hey Trantor Are you still working on a RS10613xs+ build? if so, how is it comming? Thanks for the great work!! Link to comment Share on other sites More sharing options...
brauner Posted December 12, 2013 Share #164 Posted December 12, 2013 Thank you Do you have any instruction how to add the r8169.ko to the modules directory. I am not god in linux. My DSM installed on PC (with USB loader) I manage to copy the file to the usb stick (using the DSM gui), then went to the console and tried to copy from /volumeUSB2/usbshare/ to /lib/modules/, but got permission denied error. Update: managed to copy the .ko file to modules directory (using winscp). whats next? Update 2: OK, got it, install it and its working -Roei Link to comment Share on other sites More sharing options...
Trantor Posted December 12, 2013 Author Share #165 Posted December 12, 2013 Thank you Do you have any instruction how to add the r8169.ko to the modules directory. I am not god in linux. My DSM installed on PC (with USB loader) I manage to copy the file to the usb stick (using the DSM gui), then went to the console and tried to copy from /volumeUSB2/usbshare/ to /lib/modules/, but got permission denied error. Update: managed to copy the .ko file to modules directory (using winscp). whats next? Update 2: OK, got it, install it and its working -Roei Perfect Thank you for the feedback Link to comment Share on other sites More sharing options...
bigbear Posted December 14, 2013 Share #166 Posted December 14, 2013 Hello Trantor, Can you please help me get wifi working on Asus p5k Deluxe Here are the specs and official drivers are in download section. I tried but can't get it to work http://www.asus.com/Motherboards/P5K_De ... ifications Link to comment Share on other sites More sharing options...
stanza Posted December 15, 2013 Share #167 Posted December 15, 2013 With the sas/SCSI issue. Does xpenology put its OS partition on every drive? Or only the 1st few? Eg if I have the following 4 sata drives 15 sas drives If I 1st install and set it up say with just the 4 sata.... Then attach the external 15 sas drives later. Config like 4 sata one volume 15 sas 2nd volume Will it be fine over reboots?.... Or will it still complain ? Thanks . Link to comment Share on other sites More sharing options...
stelle007 Posted December 15, 2013 Share #168 Posted December 15, 2013 With the sas/SCSI issue. Does xpenology put its OS partition on every drive? Or only the 1st few? Eg if I have the following 4 sata drives 15 sas drives If I 1st install and set it up say with just the 4 sata.... Then attach the external 15 sas drives later. Config like 4 sata one volume 15 sas 2nd volume Will it be fine over reboots?.... Or will it still complain ? Thanks . Yes, it installs system partition on every drive, so yes it will complain after reboot Link to comment Share on other sites More sharing options...
didlawowo Posted December 15, 2013 Share #169 Posted December 15, 2013 do you think it could be possible to have HDMI output work ? on H61MV ITX asrock (intel HD grpahics ? ) Link to comment Share on other sites More sharing options...
Swoosh Posted December 19, 2013 Share #170 Posted December 19, 2013 Hello ! Thanks for your work ! I'd need driver for Highpoint Oocket 2720GSL sata controler (not the RAID one) The chip is a Marvell 88SE9480 Drivers source code can be found hear : http://www.highpoint-tech.com/BIOS_Driv ... source.tgz I Have a package with an impressive list of drivers for Red Hat, Gentoo, SUSE but don't know what to do with (seems to be used with distib's installer...) Is it possible to have more informations on what is needed to do it by myself ? I saw the modules for e1000 is loaded but don't find it in lib/module , just need to know how to build my module with the source code I have (does it need the associate kernel source 3.2.30 ? ...) Is it possible to built it on the syno or on a separate machine ? Thank you ! Edit : I managed to compile the driver,but some warnings appeared root@debian:/home/temp/driver_hpt/partial# make make ARCH=x86_64 CC=cc LD=ld CROSS_COMPILE= V= -C /lib/modules/3.2.0-4-amd64/build SUBDIRS=`pwd` modules make[1]: entrant dans le répertoire « /usr/src/linux-headers-3.2.0-4-amd64 » make -C /usr/src/linux-headers-3.2.0-4-amd64 \ KBUILD_SRC=/usr/src/linux-headers-3.2.0-4-common \ KBUILD_EXTMOD="/home/temp/driver_hpt/partial" -f /usr/src/linux-headers-3.2.0-4-common/Makefile \ modules CC [M] /home/temp/driver_hpt/partial/linux_main.o /home/temp/driver_hpt/partial/linux_main.c: In function ‘scsi_cmd_to_req_conv’: /home/temp/driver_hpt/partial/linux_main.c:909:24: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/temp/driver_hpt/partial/linux_main.c: In function ‘mv_scsi_slave_alloc’: /home/temp/driver_hpt/partial/linux_main.c:1573:19: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/temp/driver_hpt/partial/linux_main.c: At top level: /home/temp/driver_hpt/partial/linux_main.c:1805:2: warning: initialization from incompatible pointer type [enabled by default] /home/temp/driver_hpt/partial/linux_main.c:1805:2: warning: (near initialization for ‘mv_driver_template.change_queue_depth’) [enabled by default] CC [M] /home/temp/driver_hpt/partial/hba_exp.o CC [M] /home/temp/driver_hpt/partial/hba_mod.o CC [M] /home/temp/driver_hpt/partial/hba_timer.o CC [M] /home/temp/driver_hpt/partial/mv_os.o CC [M] /home/temp/driver_hpt/partial/linux_iface.o LD [M] /home/temp/driver_hpt/partial/mv94xx.o Building modules, stage 2. MODPOST 1 modules WARNING: could not find /home/temp/driver_hpt/partial/lib/.libmv_nonraid_64.obj.cmd for /home/temp/driver_hpt/partial/lib/libmv_nonraid_64.obj CC /home/temp/driver_hpt/partial/mv94xx.mod.o LD [M] /home/temp/driver_hpt/partial/mv94xx.ko make[1]: quittant le répertoire « /usr/src/linux-headers-3.2.0-4-amd64 » root@debian:/home/temp/driver_hpt/partial# I modified source code to meet kernel 3.2 : replace # include with # include in mv_os.h And replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) and DMA_32BIT_MASK macro with DMA_BIT_MASK(32) in linux_main.c Will there any trouble with this ? I successfully get a mv94xx.ko module. Link to comment Share on other sites More sharing options...
biglib Posted December 20, 2013 Share #171 Posted December 20, 2013 Hello, Could you please add the Broadcom NetXtreme II 5709 NIC driver? Here is the download: http://www.broadcom.com/support/license ... 7.8.56.zip Thank you! Link to comment Share on other sites More sharing options...
M4rshel Posted December 20, 2013 Share #172 Posted December 20, 2013 hi, driver for Marvell Yukon 88E8071 PCI-E Gigabit Ethernet Controller would be great. Then i could make a nice XPenology out of my lame easystore h340 Home Server from Acer Link to comment Share on other sites More sharing options...
Alex HPC Posted December 21, 2013 Share #173 Posted December 21, 2013 Hi Trantor, Thanks for your works For me too driver for Marvell Yukon 88E8071 PCI-E Gigabit Ethernet :For easystore h340 Home Server from Acer http://www.marvell.com/support/download ... !849570273 Regards Link to comment Share on other sites More sharing options...
Trantor Posted December 21, 2013 Author Share #174 Posted December 21, 2013 This is an updated synoobot file which include several updates/fixes. Link : http://xpenology.trantor.be/beta/ Known issues: - You can't install DSM on a drive connected to a SCSI/SAS controller (configuration lost on reboot) - Volume containing drives attached to SCSI/SAS controller is "broken" on each reboot, you must click repair. Changelog: v3 (21/12/2013) - Add more drivers for KVM / virtio / virtualization support - Add patched r8169 driver (realtek chips which are not working with the r8168 driver will work with this one) - Add latest version of sk98lin driver (Marvell Yukon / SysKonnect SK-98xx/SK-95xx support) - Update Broadcom bnx2 driver to latest version v2 (05/12/2013) - AX88179 Gigabit Ethernet USB 3.0 - Latest driver version for RocketRAID 3xxx/4xxx Controller - Latest (aacraid) driver version for Adaptec - Support XFS filesystem (no idea if DSM will automount this) v1 - Update synobios.ko (by k3dt ; fix "buzzer stop button pressed" warning) SCSI ---- Highpoint Rocketraid 2720SGL LSI mpt2sas v17 Adaptec aacraid Intel C600 Series Chipset SAS NETWORK ------- 3Com 3c590/3c900, 3cr990 Alteon AceNIC/3Com 3C985/NetGear GA620 QLogic QLA3XXX SiS 900/7016 SiS190/SiS191 USB --- USB to serial / Prolific 2303 driver PATA ---- ATI PATA (PATA_ATIIXP) AMD/NVidia PATA (PATA_AMD) CMD64x PATA (PATA_CMD64X) JMicron PATA (PATA_JMICRON) Marvell PATA (PATA_MARVELL) Promise PATA 2027x (PATA_PDC2027X) Intel SCH PATA (PATA_SCH) CMD / Silicon Image 680 PATA (PATA_SIL680) SiS PATA (PATA_SIS) VIA PATA (PATA_VIA) Winbond SL82C105 PATA (PATA_WINBOND) Legacy PATA support (PATA_LEGACY) Link to comment Share on other sites More sharing options...
Alex HPC Posted December 21, 2013 Share #175 Posted December 21, 2013 Thanks a lot Trantor, H360 Easystore works like a charm wake on lan to ! It's amazing, again thank you. Link to comment Share on other sites More sharing options...
Recommended Posts