sfu420 Posted February 12, 2016 Share #776 Posted February 12, 2016 Done. NVMe support added (nvme module loaded at boot) - iSCSI works (block and files) - Add NVMe support - Update mpt3sas, aacraid Great news! I think, this update will solve all of my problems. Thank you very much!!! Link to comment Share on other sites More sharing options...
ecbrad Posted February 13, 2016 Share #777 Posted February 13, 2016 XPEnology installs and works but it only sees 6 of the 7 HDD's. I grabbed this info from the system with the Thecus DOM installed which can see all 7 HDD's Thecus N7710 SATA1: Intel Corporation Device 1c02 SATA2: Silicon Image Inc. SiI 3132 Serial ATA Raid II Controller USB2.0-1: Intel Corporation Device 1c2d USB2.0-2: Intel Corporation Device 1c26 USB2.0-3: Renesas Technology Corp. Device 0015 USB3.0-1: Renesas Technology Corp. Device 0015 WAN/LAN1: Intel Corporation 82574L Gigabit Network Connection LAN2: Intel Corporation 82574L Gigabit Network Connection CPU: Intel CPU G850 @ 2.90GHz Memory: 3936 MB DOM: Single DOM Link to comment Share on other sites More sharing options...
loderunner Posted February 13, 2016 Share #778 Posted February 13, 2016 please, help.. i have supertrack ex8530 it's checked as compatible, but cant'n insnall xpeno on sata drive attached to. how to load kernel driver? thank you! can somebody explain? please) Link to comment Share on other sites More sharing options...
markspoiss Posted February 13, 2016 Share #779 Posted February 13, 2016 Can u please make it work or how i can to do it? [ 61.427607] usb 8-1: dvb_usb_v2: found a 'Fujitsu-Siemens Slim Mobile USB DVB-T' in warm state [ 61.763046] i2c-core: Attempt to register an adapter with no name! [ 61.763057] usb 8-1: dvb_usb_v2: i2c_add_adapter() failed=-22 [ 61.763078] dvb_usb_af9015: probe of 8-1:1.0 failed with error -22 [ 61.763131] usbcore: registered new interface driver dvb_usb_af9015 Thnx! Link to comment Share on other sites More sharing options...
gericb Posted February 14, 2016 Share #780 Posted February 14, 2016 (edited) I have a Dell Optiplex 7010, with Integrated Intel® 82579LM Ethernet LAN 10/100/1000 http://www.dell.com/support/home/us/en/ ... egoryId=NI Current XPEnoboot 5.2-5644.4, DSM 5.2-5644 DS3615xs Update 3 It will only currently connects at 10/100...will not connect at 1000Mbps, could you please help? Thank You! [[sOLVED]] - Turns out the switch was bad, swapped it out, all is rocking' now, included the updated BRCM drivers for my NetExtreme II card, gotta love it! Edited February 15, 2016 by Guest Link to comment Share on other sites More sharing options...
F5BJR Posted February 14, 2016 Share #781 Posted February 14, 2016 (edited) WIth 5644.5 Always same problem with my WLAN dongle ASUS USB-N13 listed in the Synology Compatibility list ... Detected but find any in the WLAN environment Edited February 15, 2016 by Guest Link to comment Share on other sites More sharing options...
bladerider Posted February 15, 2016 Share #782 Posted February 15, 2016 Hi guys, i am going to build another Xpenology machine. However, my motherboard has a build in Intel NIC (Intel® I219V). I was wondering will it be supported in current version of XPEnoboot 5.2-5644.5? Thanks for the reply Link to comment Share on other sites More sharing options...
jadie Posted February 15, 2016 Share #783 Posted February 15, 2016 Hi guys, i am going to build another Xpenology machine. However, my motherboard has a build in Intel NIC (Intel® I219V). I was wondering will it be supported in current version of XPEnoboot 5.2-5644.5? Thanks for the reply Afaik, intel nics have the best linux support. So, there is a high chance that Xpenology supports it as well. Link to comment Share on other sites More sharing options...
acer21 Posted February 15, 2016 Share #784 Posted February 15, 2016 Hi, i need help on how i can able to use the highpoint rocketraid sas controller 2680SGL xpenoboot doesnt recognize any drive and prompts me to install drives before entering, although in boot up upon powering on of the desktop it detects all the drives heres what i found on their website http://www.highpoint-tech.com/USA_new/c ... wnload.htm thank you any help on this Link to comment Share on other sites More sharing options...
holybabel Posted February 15, 2016 Share #785 Posted February 15, 2016 Hi guys, i am going to build another Xpenology machine. However, my motherboard has a build in Intel NIC (Intel® I219V). I was wondering will it be supported in current version of XPEnoboot 5.2-5644.5? Thanks for the reply There is a "Hardware supported list" on the Forum http://xpenology.com/forum/viewtopic.php?f=2&t=10973 There you can find this entry: e1000e : 82578DC/82578DM/Gigabit CT Desktop Adapter/PRO/1000 PT/PF/I217-LM/V/I218-V/LM/I219 LM/V Link to comment Share on other sites More sharing options...
loderunner Posted February 16, 2016 Share #786 Posted February 16, 2016 Hi again. I have create raid0 from only one HDD attached to ex8350 controller. Install dsm by 5644.5 xpenoboot. HDD/SSD table show disk model 1+0 raid. Is it only way to use raid controller? Can I manage HDDs attached to my raid controller by DSM? Link to comment Share on other sites More sharing options...
Isaiah33 Posted February 17, 2016 Share #787 Posted February 17, 2016 Is the Marvell 88SE91XX every going to be supported again? Link to comment Share on other sites More sharing options...
lynx7425 Posted February 18, 2016 Share #788 Posted February 18, 2016 Hi again. I have create raid0 from only one HDD attached to ex8350 controller. Install dsm by 5644.5 xpenoboot. HDD/SSD table show disk model 1+0 raid. Is it only way to use raid controller? Can I manage HDDs attached to my raid controller by DSM? +1000 Link to comment Share on other sites More sharing options...
4sag Posted February 19, 2016 Share #789 Posted February 19, 2016 Please add HP driver Smart Array E200 Controller (HP Smart Array CCISS driver) for HP ProLiant ML310 G4 ! Link to comment Share on other sites More sharing options...
koenmarijsse Posted February 20, 2016 Share #790 Posted February 20, 2016 please add driver Intel® Dual Band Wireless-AC 8260 drivers: http://ark.intel.com/products/86068/Intel-Dual-Band-Wireless-AC-8260#@downloads Link to comment Share on other sites More sharing options...
butter_fry Posted February 21, 2016 Share #791 Posted February 21, 2016 How about the sr_mod and cdrom.ko modules for external usb cd/dvd devices please! Link to comment Share on other sites More sharing options...
UNSC-117 Posted February 23, 2016 Share #792 Posted February 23, 2016 Please add driver thank you AMCC 3Ware 9690SA-8I SAS SATA PCIe x8 RAID Controller http://docs.avagotech.com/docs/12349203 Link to comment Share on other sites More sharing options...
tutantux Posted February 27, 2016 Share #793 Posted February 27, 2016 i have a q1900 with Wester digital red , in boot i receive failur on aacraid Link to comment Share on other sites More sharing options...
neverstopdreaming Posted February 28, 2016 Share #794 Posted February 28, 2016 Hi Sancome, since many new cpus (N3700 Braswell for ex.) cannot be used at the maximum performances with acpi_freq, can you compile intel_pstate module in the next release? I would like to try if it will raise correctly. thanks br Neverstopdreaming Link to comment Share on other sites More sharing options...
rauan Posted February 29, 2016 Share #795 Posted February 29, 2016 please add driver Intel® Dual Band Wireless-AC 8260 drivers: http://ark.intel.com/products/86068/Intel-Dual-Band-Wireless-AC-8260#@downloads +1 Link to comment Share on other sites More sharing options...
abced Posted March 3, 2016 Share #796 Posted March 3, 2016 Hi Sancome,since many new cpus (N3700 Braswell for ex.) cannot be used at the maximum performances with acpi_freq, can you compile intel_pstate module in the next release? I would like to try if it will raise correctly. thanks br Neverstopdreaming I would also like to see this since I'm considering using N3700 for my NAS. Link to comment Share on other sites More sharing options...
moondefer Posted March 3, 2016 Share #797 Posted March 3, 2016 Possible to add this to KERNEL options in future release please ? Bus options (PCI etc.) ---> or <*> PCI Stub driver Device Drivers ---> [*] IOMMU Hardware Support ---> [*] Support for intel IOMMU using DMA Remapping Devices [*] Enable Intel DMA Remapping Devices by Default Need this for doing passthrough with virtualbox. Explain here : viewtopic.php?f=2&t=12525&p=56465#p56465 Thanks Link to comment Share on other sites More sharing options...
colrojo Posted March 3, 2016 Share #798 Posted March 3, 2016 Hi Sancome,since many new cpus (N3700 Braswell for ex.) cannot be used at the maximum performances with acpi_freq, can you compile intel_pstate module in the next release? I would like to try if it will raise correctly. thanks br Neverstopdreaming I would also like to see this since I'm considering using N3700 for my NAS. +1 Enviado desde mi Nexus 4 mediante Tapatalk Link to comment Share on other sites More sharing options...
Huberer Posted March 4, 2016 Share #799 Posted March 4, 2016 Hi Sancome,since many new cpus (N3700 Braswell for ex.) cannot be used at the maximum performances with acpi_freq, can you compile intel_pstate module in the next release? I would like to try if it will raise correctly. thanks br Neverstopdreaming +1 That would be great. Thanks in advance Link to comment Share on other sites More sharing options...
undecided Posted March 8, 2016 Share #800 Posted March 8, 2016 It is working on an older version of XPenology, I wonder if it is still working in the latest version. Thx Link to comment Share on other sites More sharing options...
Recommended Posts