Jump to content
XPEnology Community

Drivers requests for DSM 5.2


Recommended Posts

XPEnology installs and works but it only sees 6 of the 7 HDD's. I grabbed this info from the system with the Thecus DOM installed which can see all 7 HDD's

 

Thecus N7710

 

SATA1: Intel Corporation Device 1c02

SATA2: Silicon Image Inc. SiI 3132 Serial ATA Raid II Controller

 

USB2.0-1: Intel Corporation Device 1c2d

USB2.0-2: Intel Corporation Device 1c26

USB2.0-3: Renesas Technology Corp. Device 0015

USB3.0-1: Renesas Technology Corp. Device 0015

 

WAN/LAN1: Intel Corporation 82574L Gigabit Network Connection

LAN2: Intel Corporation 82574L Gigabit Network Connection

 

CPU: Intel CPU G850 @ 2.90GHz

Memory: 3936 MB

DOM: Single DOM

Link to comment
Share on other sites

Can u please make it work or how i can to do it?

 

[ 61.427607] usb 8-1: dvb_usb_v2: found a 'Fujitsu-Siemens Slim Mobile USB DVB-T' in warm state

[ 61.763046] i2c-core: Attempt to register an adapter with no name!

[ 61.763057] usb 8-1: dvb_usb_v2: i2c_add_adapter() failed=-22

[ 61.763078] dvb_usb_af9015: probe of 8-1:1.0 failed with error -22

[ 61.763131] usbcore: registered new interface driver dvb_usb_af9015

 

Thnx!

Link to comment
Share on other sites

I have a Dell Optiplex 7010, with Integrated Intel® 82579LM Ethernet LAN 10/100/1000

 

http://www.dell.com/support/home/us/en/ ... egoryId=NI

 

Current XPEnoboot 5.2-5644.4, DSM 5.2-5644 DS3615xs Update 3

 

It will only currently connects at 10/100...will not connect at 1000Mbps, could you please help?

 

Thank You!

 

 

[[sOLVED]] - Turns out the switch was bad, swapped it out, all is rocking' now, included the updated BRCM drivers for my NetExtreme II card, gotta love it! :razz:

Edited by Guest
Link to comment
Share on other sites

Hi guys, i am going to build another Xpenology machine. However, my motherboard has a build in Intel NIC (Intel® I219V). I was wondering will it be supported in current version of XPEnoboot 5.2-5644.5?

 

Thanks for the reply :smile:

 

Afaik, intel nics have the best linux support. So, there is a high chance that Xpenology supports it as well.

Link to comment
Share on other sites

Hi,

 

i need help on how i can able to use the highpoint rocketraid sas controller 2680SGL xpenoboot doesnt recognize any drive and prompts me to install drives before entering, although in boot up upon powering on of the desktop it detects all the drives

 

 

heres what i found on their website

 

 

http://www.highpoint-tech.com/USA_new/c ... wnload.htm

 

 

thank you

 

 

any help on this

Link to comment
Share on other sites

Hi guys, i am going to build another Xpenology machine. However, my motherboard has a build in Intel NIC (Intel® I219V). I was wondering will it be supported in current version of XPEnoboot 5.2-5644.5?

 

Thanks for the reply :smile:

 

There is a "Hardware supported list" on the Forum http://xpenology.com/forum/viewtopic.php?f=2&t=10973

 

There you can find this entry:

 

e1000e : 82578DC/82578DM/Gigabit CT Desktop Adapter/PRO/1000 PT/PF/I217-LM/V/I218-V/LM/I219 LM/V

Link to comment
Share on other sites

Hi Sancome,

since many new cpus (N3700 Braswell for ex.) cannot be used at the maximum performances with acpi_freq,

can you compile intel_pstate module in the next release?

I would like to try if it will raise correctly.

 

thanks

br

Neverstopdreaming

I would also like to see this since I'm considering using N3700 for my NAS.

Link to comment
Share on other sites

Possible to add this to KERNEL options in future release please ?

 

Bus options (PCI etc.) --->

or <*> PCI Stub driver

 

Device Drivers ---> [*] IOMMU Hardware Support --->

[*] Support for intel IOMMU using DMA Remapping Devices

[*] Enable Intel DMA Remapping Devices by Default

 

Need this for doing passthrough with virtualbox.

Explain here : viewtopic.php?f=2&t=12525&p=56465#p56465

 

Thanks

Link to comment
Share on other sites

Hi Sancome,

since many new cpus (N3700 Braswell for ex.) cannot be used at the maximum performances with acpi_freq,

can you compile intel_pstate module in the next release?

I would like to try if it will raise correctly.

 

thanks

br

Neverstopdreaming

I would also like to see this since I'm considering using N3700 for my NAS.

+1

 

Enviado desde mi Nexus 4 mediante Tapatalk

Link to comment
Share on other sites

Hi Sancome,

since many new cpus (N3700 Braswell for ex.) cannot be used at the maximum performances with acpi_freq,

can you compile intel_pstate module in the next release?

I would like to try if it will raise correctly.

 

thanks

br

Neverstopdreaming

 

+1

 

That would be great. Thanks in advance

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...