Jump to content
XPEnology Community

Drivers requests for DSM 5.2


Recommended Posts

Hi trantor,

 

I've one question:

I'm still getting some problems with my PCTV 461e DVB-S2-Stick and DVB Link.

Video Station isn't a good option because it is very user-unfriendly.

 

Is there any opportunity that you could develop the correct driver for DVB-S?

 

Thanks,

Moritz

Link to comment
Share on other sites

Hey, so I'm looking to hopefully get some drivers for the NIC used on the supermicro (MBD-X10SDV-4C-TLN2F) motherboard. In the meantime I'll probably grab a PCI NIC.

 

I believe that this :: http://ark.intel.com/products/88342/Int ... n-X557-AT2 :: is the NIC on the board, based on info from the "dmidecode" command. Also, it seems like FreeNAS has just added support for this NIC in there 10.2 beta, don;t know if that helps in any way. If I can provide any more information please let me know and I'll do my best to get it.

Link to comment
Share on other sites

Hey, so I'm looking to hopefully get some drivers for the NIC used on the supermicro (MBD-X10SDV-4C-TLN2F) motherboard. In the meantime I'll probably grab a PCI NIC.

 

I believe that this :: http://ark.intel.com/products/88342/Int ... n-X557-AT2 :: is the NIC on the board, based on info from the "dmidecode" command. Also, it seems like FreeNAS has just added support for this NIC in there 10.2 beta, don;t know if that helps in any way. If I can provide any more information please let me know and I'll do my best to get it.

 

ixgbe support X550 hardware since v4.1.1 (http://sourceforge.net/projects/e1000/f ... ble/4.1.1/)

XPEnoboot 5.2-5644.1 included ixgbe v4.1.5 so your network adapter should works.

Link to comment
Share on other sites

Hi,

 

I have two driver questions..

 

1) Somebody knows if this bluetooth dongle can be compatible?

 

Bus 001 Device 002: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter

 

I have it plugged but my NAS dont show me any on bluetooth menu.

 

 

2) I have an USB WLAN RT-3070 (compatible chipset) and my N54L shows me it on wireless network.

 

812B1hqc.jpg

 

But when i want to search any available wifi network, doesnt show any.

 

I have attached to another wired network, but I dont think this is a problem..

 

I am on DSM 5.2-5644 Update 1.

 

Thanks.

Link to comment
Share on other sites

Hi All!

MB ASUS P9A-I/C2550/SAS/4L

Marvell 88SE9485 not detect in DSM 5.2 need a driver?

Please help!!!

 

ASUS seems to embeded a non standard Marvell 88SE9485 controller on their P9A-I series board.

 

I found a patch here : http://permalink.gmane.org/gmane.linux.scsi/99330

I edited the mvsas sources according the above patch.

 

To be sure, can you post the output of the command : lspci -nnvv (LOT of informations will output)

This will allow us to see if the patch is using the correct pci and subsystem ids.

 

Please post ONLY the part related to the marvell controller :wink:

 

For example, here the output of the LSI controller of a VMware VM:

00:10.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev 01)
       Subsystem: VMware LSI Logic Parallel SCSI Controller [15ad:1976]
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 64 (1500ns min, 63750ns max)
       Interrupt: pin A routed to IRQ 17
       Region 0: I/O ports at 1400 [size=11]
       Region 1: Memory at feba0000 (64-bit, non-prefetchable) [size=128K]
       Region 3: Memory at febc0000 (64-bit, non-prefetchable) [size=128K]
       [virtual] Expansion ROM at c0008000 [disabled] [size=16K]
       Kernel driver in use: mptspi

Link to comment
Share on other sites

Hi Trantor!

Result:

[spoiler=]/lib/modules$ lspci -nnvv

01:00.0 Class [0104]: Device [1b4b:9485] (rev c3)

Subsystem: Device [1043:8635]

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-

Latency: 0, Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 7

Region 0: Memory at de240000 (64-bit, non-prefetchable)

Region 2: Memory at de200000 (64-bit, non-prefetchable)

Expansion ROM at de260000 [disabled]

Capabilities: [40] Power Management version 3

Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+

Address: 0000000000000000 Data: 0000

Capabilities: [70] Express (v2) Endpoint, MSI 00

DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us

ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 256 bytes, MaxReadReq 512 bytes

DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-

LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us

ClockPM- Surprise- LLActRep- BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported

DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+, LTR-, OBFF Disabled

LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-

Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

Compliance De-emphasis: -6dB

LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-

EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-

Capabilities: [140 v1] Virtual Channel

Caps: LPEVC=0 RefClk=100ns PATEntryBits=1

Arb: Fixed- WRR32- WRR64- WRR128-

Ctrl: ArbSelect=Fixed

Status: InProgress-

VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-

Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-

Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01

Status: NegoPending- InProgress-

 

02:00.0 Class [0104]: Device [1b4b:9485] (rev c3)

Subsystem: Device [1043:8635]

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-

Latency: 0, Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 7

Region 0: Memory at de140000 (64-bit, non-prefetchable)

Region 2: Memory at de100000 (64-bit, non-prefetchable)

Expansion ROM at de160000 [disabled]

Capabilities: [40] Power Management version 3

Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+

Address: 0000000000000000 Data: 0000

Capabilities: [70] Express (v2) Endpoint, MSI 00

DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us

ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 256 bytes, MaxReadReq 512 bytes

DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-

LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us

ClockPM- Surprise- LLActRep- BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported

DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+, LTR-, OBFF Disabled

LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-

Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

Compliance De-emphasis: -6dB

LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-

EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-

Capabilities: [140 v1] Virtual Channel

Caps: LPEVC=0 RefClk=100ns PATEntryBits=1

Arb: Fixed- WRR32- WRR64- WRR128-

Ctrl: ArbSelect=Fixed

Status: InProgress-

VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-

Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-

Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01

Status: NegoPending- InProgress-

 

I am new to Linux but I try.

Link to comment
Share on other sites

Hey, so I'm looking to hopefully get some drivers for the NIC used on the supermicro (MBD-X10SDV-4C-TLN2F) motherboard. In the meantime I'll probably grab a PCI NIC.

 

I believe that this :: http://ark.intel.com/products/88342/Int ... n-X557-AT2 :: is the NIC on the board, based on info from the "dmidecode" command. Also, it seems like FreeNAS has just added support for this NIC in there 10.2 beta, don;t know if that helps in any way. If I can provide any more information please let me know and I'll do my best to get it.

 

ixgbe support X550 hardware since v4.1.1 (http://sourceforge.net/projects/e1000/f ... ble/4.1.1/)

XPEnoboot 5.2-5644.1 included ixgbe v4.1.5 so your network adapter should works.

 

 

Hmm I tried XPEnoboot 5.2-5644.1 and I get the "eth0 not running" and "eth1 not running" messages when i attempt to run.

Link to comment
Share on other sites

Hmm I tried XPEnoboot 5.2-5644.1 and I get the "eth0 not running" and "eth1 not running" messages when i attempt to run.

 

Did you find your system in Synology Assistant ?

 

I am new to Linux but I try.

 

Your output is not complete.

Please provide full.

if needed copy it to a file and attach it to your answer.

Link to comment
Share on other sites

Hi All!

 

lspci -nnvv

[spoiler=]00:00.0 Class [0600]: Device [8086:1f02] (rev 02)

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-

Latency: 0

 

00:01.0 Class [0604]: Device [8086:1f10] (rev 02)

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-

Latency: 0, Cache Line Size: 64 bytes

Region 0: Memory at de300000 (64-bit, non-prefetchable)

Bus: primary=00, secondary=04, subordinate=05, sec-latency=0

I/O behind bridge: 0000d000-0000dfff

Memory behind bridge: dc000000-de0fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-

BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0

ExtTag+ RBE+

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 128 bytes, MaxReadReq 512 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

LnkCap: Port #1, Speed 5GT/s, Width x4, ASPM L1, Exit Latency L0s <1us, L1 <4us

ClockPM- Surprise+ LLActRep+ BwNot+

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-

SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-

Slot #0, PowerLimit 25.000W; Interlock- NoCompl-

SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-

Control: AttnInd Off, PwrInd Off, Power- Interlock-

SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-

Changed: MRL- PresDet- LinkState-

RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-

RootCap: CRSVisible-

RootSta: PME ReqID 0000, PMEStatus- PMEPending-

DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+

DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+, LTR-, OBFF Disabled ARIFwd-

LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-

Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

Compliance De-emphasis: -6dB

LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-

EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-

Capabilities: [80] Power Management version 3

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [88] Subsystem: Device [1043:8646]

Capabilities: [90] MSI: Enable+ Count=1/1 Maskable+ 64bit-

Address: fee0f00c Data: 4171

Masking: 00000000 Pending: 00000000

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

Kernel driver in use: pcieport

 

00:02.0 Class [0604]: Device [8086:1f11] (rev 02)

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-

Latency: 0, Cache Line Size: 64 bytes

Region 0: Memory at de320000 (64-bit, non-prefetchable)

Bus: primary=00, secondary=03, subordinate=03, sec-latency=0

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0

ExtTag+ RBE+

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 128 bytes, MaxReadReq 512 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

LnkCap: Port #2, Speed 5GT/s, Width x4, ASPM L1, Exit Latency L0s <1us, L1 <4us

ClockPM- Surprise+ LLActRep+ BwNot+

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-

Slot #1, PowerLimit 25.000W; Interlock- NoCompl-

SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-

Control: AttnInd Off, PwrInd Off, Power- Interlock-

SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-

Changed: MRL- PresDet- LinkState-

RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-

RootCap: CRSVisible-

RootSta: PME ReqID 0000, PMEStatus- PMEPending-

DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+

DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-

LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-

Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

Compliance De-emphasis: -6dB

LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-

EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-

Capabilities: [80] Power Management version 3

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [88] Subsystem: Device [1043:8646]

Capabilities: [90] MSI: Enable+ Count=1/1 Maskable+ 64bit-

Address: fee0f00c Data: 4181

Masking: 00000000 Pending: 00000000

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

Kernel driver in use: pcieport

 

00:03.0 Class [0604]: Device [8086:1f12] (rev 02)

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-

Latency: 0, Cache Line Size: 64 bytes

Region 0: Memory at de340000 (64-bit, non-prefetchable)

Bus: primary=00, secondary=02, subordinate=02, sec-latency=0

Memory behind bridge: de100000-de1fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0

ExtTag+ RBE+

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 256 bytes, MaxReadReq 512 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

LnkCap: Port #3, Speed 5GT/s, Width x4, ASPM L1, Exit Latency L0s <1us, L1 <4us

ClockPM- Surprise+ LLActRep+ BwNot+

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt+

SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-

Slot #2, PowerLimit 25.000W; Interlock- NoCompl-

SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-

Control: AttnInd Off, PwrInd Off, Power- Interlock-

SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-

Changed: MRL- PresDet- LinkState-

RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-

RootCap: CRSVisible-

RootSta: PME ReqID 0000, PMEStatus- PMEPending-

DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+

DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+, LTR-, OBFF Disabled ARIFwd-

LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-

Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

Compliance De-emphasis: -6dB

LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-

EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-

Capabilities: [80] Power Management version 3

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [88] Subsystem: Device [1043:8646]

Capabilities: [90] MSI: Enable+ Count=1/1 Maskable+ 64bit-

Address: fee0f00c Data: 4191

Masking: 00000000 Pending: 00000000

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

Kernel driver in use: pcieport

 

00:04.0 Class [0604]: Device [8086:1f13] (rev 02)

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-

Latency: 0, Cache Line Size: 64 bytes

Region 0: Memory at de360000 (64-bit, non-prefetchable)

Bus: primary=00, secondary=01, subordinate=01, sec-latency=0

Memory behind bridge: de200000-de2fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0

ExtTag+ RBE+

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 256 bytes, MaxReadReq 512 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

LnkCap: Port #4, Speed 5GT/s, Width x4, ASPM L1, Exit Latency L0s <1us, L1 <4us

ClockPM- Surprise+ LLActRep+ BwNot+

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt+

SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-

Slot #3, PowerLimit 25.000W; Interlock- NoCompl-

SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-

Control: AttnInd Off, PwrInd Off, Power- Interlock-

SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-

Changed: MRL- PresDet- LinkState-

RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-

RootCap: CRSVisible-

RootSta: PME ReqID 0000, PMEStatus- PMEPending-

DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+

DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+, LTR-, OBFF Disabled ARIFwd-

LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-

Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

Compliance De-emphasis: -6dB

LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-

EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-

Capabilities: [80] Power Management version 3

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [88] Subsystem: Device [8086:8086]

Capabilities: [90] MSI: Enable+ Count=1/1 Maskable+ 64bit-

Address: fee0f00c Data: 41a1

Masking: 00000000 Pending: 00000000

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

Kernel driver in use: pcieport

 

00:0e.0 Class [0600]: Device [8086:1f14] (rev 02)

Subsystem: Device [8086:0000]

Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-

Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0

ExtTag- RBE-

DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 256 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported

DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled

 

00:0f.0 Class [0806]: Device [8086:1f16] (rev 02)

Subsystem: Device [8086:0000]

Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-

Latency: 0, Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 10

Capabilities: [40] Express (v2) Root Complex Event Collector, MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0

ExtTag- RBE-

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 256 bytes, MaxReadReq 128 bytes

DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-

DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported

DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled

Capabilities: [80] Power Management version 3

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [90] MSI: Enable- Count=1/1 Maskable+ 64bit-

Address: 00000000 Data: 0000

Masking: 00000000 Pending: 00000000

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

Capabilities: [150 v1] Root Complex Event Collector <?>

 

00:13.0 Class [0880]: Device [8086:1f15] (rev 02)

Subsystem: Device [8086:0000]

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-

Latency: 0

Interrupt: pin A routed to IRQ 10

Region 0: Memory at de3a4000 (64-bit, non-prefetchable)

Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0

ExtTag- RBE+

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+

MaxPayload 256 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr+ UnsuppReq- AuxPwr- TransPend-

DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported

DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+, LTR-, OBFF Disabled

Capabilities: [80] Power Management version 3

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [8c] MSI: Enable- Count=1/1 Maskable+ 64bit+

Address: 0000000000000000 Data: 0000

Masking: 00000000 Pending: 00000000

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UESvrt: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

AERCap: First Error Pointer: 16, GenCap- CGenEn- ChkCap- ChkEn-

 

00:14.0 Class [0200]: Device [8086:1f41] (rev 03)

Subsystem: Device [1043:8638]

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-

Latency: 0, Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 20

Region 0: Memory at de380000 (64-bit, non-prefetchable)

Region 2: I/O ports at e000

Region 4: Memory at de3a0000 (64-bit, non-prefetchable)

Capabilities: [40] Power Management version 3

Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-

Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+

Address: 0000000000000000 Data: 0000

Masking: 00000000 Pending: 00000000

Capabilities: [70] MSI-X: Enable+ Count=10 Masked-

Vector table: BAR=4 offset=00000000

PBA: BAR=4 offset=00002000

Capabilities: [a0] Express (v2) Root Complex Integrated Endpoint, MSI 00

DevCap: MaxPayload 512 bytes, PhantFunc 0

ExtTag- RBE+

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+

MaxPayload 512 bytes, MaxReadReq 512 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-

DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported

DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+, LTR-, OBFF Disabled

Capabilities: [100 v2] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

Capabilities: [140 v1] Device Serial Number 54-a0-50-ff-ff-85-5d-f7

Capabilities: [1a0 v1] Transaction Processing Hints

Device specific mode supported

Steering table in TPH capability structure

Capabilities: [1d0 v1] Access Control Services

ACSCap: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-

ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-

Kernel driver in use: igb

 

00:16.0 Class [0c03]: Device [8086:1f2c] (rev 02) (prog-if 20)

Subsystem: Device [1043:8646]

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-

Latency: 0

Interrupt: pin A routed to IRQ 23

Region 0: Memory at de3a5000 (32-bit, non-prefetchable)

Capabilities: [50] Power Management version 3

Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [58] Debug port: BAR=1 offset=00a0

Capabilities: [98] PCI Advanced Features

AFCap: TP+ FLR+

AFCtrl: FLR-

AFStatus: TP-

Kernel driver in use: ehci-pci

 

00:18.0 Class [0106]: Device [8086:1f32] (rev 02) (prog-if 01)

Subsystem: Device [1043:8646]

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-

Latency: 0

Interrupt: pin A routed to IRQ 44

Region 0: I/O ports at e090

Region 1: I/O ports at e080

Region 2: I/O ports at e070

Region 3: I/O ports at e060

Region 4: I/O ports at e020

Region 5: Memory at de3a6000 (32-bit, non-prefetchable)

Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-

Address: fee0100c Data: 41c1

Capabilities: [70] Power Management version 3

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)

Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004

Kernel driver in use: ahci

 

00:1f.0 Class [0601]: Device [8086:1f38] (rev 02)

Subsystem: Device [1043:8646]

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-

Latency: 0

Capabilities: [e0] Vendor Specific Information: Len=0c <?>

Kernel driver in use: lpc_ich

 

00:1f.3 Class [0c05]: Device [8086:1f3c] (rev 02)

Subsystem: Device [1043:8646]

Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-

Interrupt: pin B routed to IRQ 18

Region 0: Memory at de3a7000 (32-bit, non-prefetchable)

Region 4: I/O ports at e040

Kernel driver in use: i801_smbus

 

01:00.0 Class [0104]: Device [1b4b:9485] (rev c3)

Subsystem: Device [1043:8635]

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-

Latency: 0, Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 7

Region 0: Memory at de240000 (64-bit, non-prefetchable)

Region 2: Memory at de200000 (64-bit, non-prefetchable)

Expansion ROM at de260000 [disabled]

Capabilities: [40] Power Management version 3

Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+

Address: 0000000000000000 Data: 0000

Capabilities: [70] Express (v2) Endpoint, MSI 00

DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us

ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 256 bytes, MaxReadReq 512 bytes

DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-

LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us

ClockPM- Surprise- LLActRep- BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported

DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+, LTR-, OBFF Disabled

LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-

Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

Compliance De-emphasis: -6dB

LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-

EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-

Capabilities: [140 v1] Virtual Channel

Caps: LPEVC=0 RefClk=100ns PATEntryBits=1

Arb: Fixed- WRR32- WRR64- WRR128-

Ctrl: ArbSelect=Fixed

Status: InProgress-

VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-

Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-

Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01

Status: NegoPending- InProgress-

 

02:00.0 Class [0104]: Device [1b4b:9485] (rev c3)

Subsystem: Device [1043:8635]

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-

Latency: 0, Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 7

Region 0: Memory at de140000 (64-bit, non-prefetchable)

Region 2: Memory at de100000 (64-bit, non-prefetchable)

Expansion ROM at de160000 [disabled]

Capabilities: [40] Power Management version 3

Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+

Address: 0000000000000000 Data: 0000

Capabilities: [70] Express (v2) Endpoint, MSI 00

DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us

ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 256 bytes, MaxReadReq 512 bytes

DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-

LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us

ClockPM- Surprise- LLActRep- BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported

DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+, LTR-, OBFF Disabled

LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-

Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

Compliance De-emphasis: -6dB

LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-

EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-

Capabilities: [140 v1] Virtual Channel

Caps: LPEVC=0 RefClk=100ns PATEntryBits=1

Arb: Fixed- WRR32- WRR64- WRR128-

Ctrl: ArbSelect=Fixed

Status: InProgress-

VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-

Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-

Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01

Status: NegoPending- InProgress-

 

04:00.0 Class [0604]: Device [1a03:1150] (rev 02)

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=04, secondary=05, subordinate=05, sec-latency=32

I/O behind bridge: 0000d000-0000dfff

Memory behind bridge: dc000000-de0fffff

Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-

BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+

Address: 0000000000000000 Data: 0000

Capabilities: [78] Power Management version 3

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)

Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [80] Express (v1) PCI-Express to PCI/PCI-X Bridge, MSI 00

DevCap: MaxPayload 128 bytes, PhantFunc 0

ExtTag- AttnBtn- AttnInd- PwrInd- RBE+

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-

MaxPayload 128 bytes, MaxReadReq 512 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-

LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <2us

ClockPM- Surprise- LLActRep- BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

Capabilities: [a4] Subsystem: Device [1a03:1150]

Capabilities: [100 v1] Virtual Channel

Caps: LPEVC=0 RefClk=100ns PATEntryBits=1

Arb: Fixed- WRR32- WRR64- WRR128-

Ctrl: ArbSelect=Fixed

Status: InProgress-

VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-

Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-

Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01

Status: NegoPending- InProgress-

 

05:00.0 Class [0300]: Device [1a03:2000] (rev 21)

Subsystem: Device [1043:84eb]

Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-

Interrupt: pin A routed to IRQ 11

Region 0: Memory at dc000000 (32-bit, non-prefetchable)

Region 1: Memory at de000000 (32-bit, non-prefetchable)

Region 2: I/O ports at d000

Expansion ROM at [disabled]

Capabilities: [40] Power Management version 3

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

 

Link to comment
Share on other sites

Hi,

 

I have two driver questions..

 

1) Somebody knows if this bluetooth dongle can be compatible?

 

Bus 001 Device 002: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter

 

I have it plugged but my NAS dont show me any on bluetooth menu.

 

 

2) I have an USB WLAN RT-3070 (compatible chipset) and my N54L shows me it on wireless network.

 

812B1hqc.jpg

 

But when i want to search any available wifi network, doesnt show any.

 

I have attached to another wired network, but I dont think this is a problem..

 

I am on DSM 5.2-5644 Update 1.

 

Thanks.

 

Someone knows how to work properly wlan usb al least?

 

Thanks.

Link to comment
Share on other sites

Hmm I tried XPEnoboot 5.2-5644.1 and I get the "eth0 not running" and "eth1 not running" messages when i attempt to run.

 

Did you find your system in Synology Assistant ?

 

Unfortunately no I do not, it also does not show up under my router's "connected devices", so it does seem as if the etho port is not running correctly, if at all.

Link to comment
Share on other sites

What else can I help?

 

Just wait the next release :smile:

 

Hmm I tried XPEnoboot 5.2-5644.1 and I get the "eth0 not running" and "eth1 not running" messages when i attempt to run.

 

Did you find your system in Synology Assistant ?

 

Unfortunately no I do not, it also does not show up under my router's "connected devices", so it does seem as if the etho port is not running correctly, if at all.

 

Can you boot with a linux live cd like ubuntu, check if your network adapter works and provide the output of lspci -nnvv (only the part related to your network adapter).

Link to comment
Share on other sites

@bombai:

For your bluetooth issue look if the module (bluetooth.ko) is present in /lib/modules/ and insmod it.

 

Hi Trantor,

 

Here is my instructions..

 

i1sU98wB.jpg

 

In this screenshot gives me an error from bluetooth.ko, but the first time for insmod dont give me any error.

 

I have unplugged and plugged again, but dont show me anything on bluetooth menu.

 

Can I try something more?

 

Many thanks.

Link to comment
Share on other sites

Is anyone will/able to get drivers working for the Highpoint Technologies Rocket 750 HBA?

 

Drivers are found from the manufacturer here: http://www.highpoint-tech.com/USA_new/s ... wnload.htm

 

I've tried to compile the source drivers, but I wasn't able to get kernel-headers installed on XPenology to build them from source. Any help would be greatly appreciated.

Link to comment
Share on other sites

Hello everybody,

 

what are the correct steps to compile media drivers from source for XPEnology. I did read every post from this thread and there are many requests for DVB. I am sure it will be usefull for more people than me.

 

I know that this topis should be for net and network requests. I started separate topic here: viewtopic.php?f=2&t=9351

 

I failed several times and I am really mad about myself being not able to do it. Can anyone help me please?

Link to comment
Share on other sites

Hey, so I'm looking to hopefully get some drivers for the NIC used on the supermicro (MBD-X10SDV-4C-TLN2F) motherboard. In the meantime I'll probably grab a PCI NIC.

 

I believe that this :: http://ark.intel.com/products/88342/Int ... n-X557-AT2 :: is the NIC on the board, based on info from the "dmidecode" command. Also, it seems like FreeNAS has just added support for this NIC in there 10.2 beta, don;t know if that helps in any way. If I can provide any more information please let me know and I'll do my best to get it.

 

ixgbe support X550 hardware since v4.1.1 (http://sourceforge.net/projects/e1000/f ... ble/4.1.1/)

XPEnoboot 5.2-5644.1 included ixgbe v4.1.5 so your network adapter should works.

 

 

Hmm I tried XPEnoboot 5.2-5644.1 and I get the "eth0 not running" and "eth1 not running" messages when i attempt to run.

 

Nothing in changelog but latest version of ixgbe (v4.2.3) have more X550 PCI DEVICE declared than v4.1.5:

 

v4.1.5 have only:

IXGBE_DEV_ID_X550EM_X_10G_T

 

v4.2.3:

IXGBE_DEV_ID_X550EM_X_KX4
IXGBE_DEV_ID_X550EM_X_KR
IXGBE_DEV_ID_X550EM_X_SFP
IXGBE_DEV_ID_X550EM_X_10G_T

 

No idea exactly what it is but it's a start.

Link to comment
Share on other sites

??

 

With old versions i have no problem with WLAN USB dongle in compability Synology list : Asus USB-N13 and some others WLAN dongles

 

With new versions i cannot use and with dongle plugged i have CPU usage 95 % ???

WLAN Environment is not greyed when i plug the dongle but i cannot use

WLAN environment is greyed without dongle

Link to comment
Share on other sites

Hello,

 

i have the Mellonox infinihost III EX card, can anybody tell me how to get it working?

 

Ik got the latest xpenoboot, i added this driver package in lib/modules

https://download.xpenology.fr/drivers/i ... nd-5.2.zip

 

and then i changed the RC files in /etc/rc and etc.default to this,

 

NET_DRIVERS="dca e1000e i2c-algo-bit igb be2net ixgbe tn40xx ib_core ib_mad ib_addr ib_sa ib_cm ib_ipoib iw_cm rdma_cm xprtrdma svcrdma mlx4_ib"

 

but it doesn`t seemed to be working, the chip from the card is mt25208 maybe this is not in the driver package?

 

Can anybody confirm this? Or did i forget something?

Link to comment
Share on other sites

Hello,

 

i have the Mellonox infinihost III EX card, can anybody tell me how to get it working?

 

Ik got the latest xpenoboot, i added this driver package in lib/modules

https://download.xpenology.fr/drivers/i ... nd-5.2.zip

 

and then i changed the RC files in /etc/rc and etc.default to this,

 

NET_DRIVERS="dca e1000e i2c-algo-bit igb be2net ixgbe tn40xx ib_core ib_mad ib_addr ib_sa ib_cm ib_ipoib iw_cm rdma_cm xprtrdma svcrdma mlx4_ib"

 

but it doesn`t seemed to be working, the chip from the card is mt25208 maybe this is not in the driver package?

 

Can anybody confirm this? Or did i forget something?

 

I think i have found the problem, with the newest drivers Infinihost III EX is not supported anymore, i found the latest drivers were this card is supported, can anybody compiles these drivers for me? I`m using XPEnoboot 5.2-5644.1.

 

This are the drivers:

http://downloads.openfabrics.org/OFED/a ... .5.3.2.tgz

 

Kind regards!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...