Poechi Posted March 2, 2014 Share #426 Posted March 2, 2014 (edited) - Edited July 10, 2015 by Guest Link to comment Share on other sites More sharing options...
verlaanac Posted March 2, 2014 Share #427 Posted March 2, 2014 HI Guys, Installed DSM 5.0 BETA on my sys, one question though: It has an Atheros NIC, I don't see traffic in the performance overview. Does it have problems displaying, or am I the only one with this minor issue? Thx Board: AsRock B85M-ITX Link to comment Share on other sites More sharing options...
stanza Posted March 3, 2014 Share #428 Posted March 3, 2014 Gday Trantor, Being the man you are, any chance you can have a look at how they pull HDD Temperatures / Info? eg On my SAS System Intel 6 Bay SAS Expander Cage Eother LSI 1068e or LSI 2008 SAS card is the same Drives are detected as -1C and all being SSD's Though from a shell when you run smartctl it can pull out the temperatures just fine eg S5000VSA> smartctl -a /dev/sdg | grep "Temperature" 194 Temperature_Celsius 0x0002 064 062 000 Old_age Always - 34 (Min/Max 13/38) S5000VSA> smartctl -a /dev/sdh | grep "Temperature" 194 Temperature_Celsius 0x0002 064 063 000 Old_age Always - 33 (Min/Max 13/37) so Smart data is there and working fine. This thread show others who have figured that /webman/modules/StorageManager/storagehandler.cgi pulls the data wrong somehow.... http://xpenology.com/forum/viewtopic.php?f=2&t=1848 I don't care if the drives say they are SSD's but temps would be nice to read.... as you know it gets HOT Here . Link to comment Share on other sites More sharing options...
gnoboot Posted March 3, 2014 Share #429 Posted March 3, 2014 Your disk might be sleeping. [spoiler=] /libsynosdk/lib/disk/disk_temperature_get.c /** * Get disk temperature * * @param szDevice : device name. ex: /dev/hda * * @return -1: can't get disk temperature * other: disk temperature */ int SYNODiskTemperatureGet(char *szDevice) { int retval = -1; struct ata_smart_values curval; if (NULL == szDevice) { goto ERROR; } //don't check if device is not running. if (FALSE == SYNODiskIsRunning(szDevice)) { goto ERROR; } if (SYNO_DISK_PROTOCOL_TYPE_SAS == SYNODiskScsiProtocolGet(szDevice)) { retval = ScsiSmartTemperatureGet(szDevice); } else { if (SmartDataRead(szDevice, &curval, NULL)) { SYSLOG(LOG_ERR,"read value %s fail", szDevice); goto ERROR; } retval = SmartTemperatureGet(&curval); if (0 > retval) { retval = SmartAirflowTempGet(&curval); } } //#20062 temperature under 0 degree. sensor would return 6553X. //set temperature as 0 while temperature over 200 degree. if(retval > 200) { retval = 0; } ERROR: return retval; } It's DSM, same reason why I stopped fixing ssd misinformation for VMs. Link to comment Share on other sites More sharing options...
wenlez Posted March 3, 2014 Share #430 Posted March 3, 2014 Is there a Wiki page or official list of compatible SATA controller/RAID card? i'm looking to buy an 8 port PCIe RAID card. cheaper the better. Going to be passthrough with ESXi. Link to comment Share on other sites More sharing options...
voloszad Posted March 3, 2014 Share #431 Posted March 3, 2014 Hi, can somebody tell me, how can I change the scaling_governor to boot in ondemand configuration? It's default setting is performance, hence my cpu always running on max frequency. I can manually edit the governor, but after a restart it resets itself. Link to comment Share on other sites More sharing options...
snoopy78 Posted March 3, 2014 Share #432 Posted March 3, 2014 Is there a Wiki page or official list of compatible SATA controller/RAID card? i'm looking to buy an 8 port PCIe RAID card. cheaper the better. Going to be passthrough with ESXi. Ibm m1015 with lsi it flash...around 80 eur at ebay...google will be ur best friend for flash procedure Link to comment Share on other sites More sharing options...
stanza Posted March 4, 2014 Share #433 Posted March 4, 2014 Your disk might be sleeping. It's DSM, same reason why I stopped fixing ssd misinformation for VMs. Looking at that if (SYNO_DISK_PROTOCOL_TYPE_SAS Is it that it's probing ScsiSmartTemperatureGet and not SmartTemperatureGet ? if so can we / you / someone change it to just read Normal SmartTemperatureGet.... even if the drives are DETECTED as SAS.. eg in my Case.....drives are SATA.... Behind a SAS Expander, connected to a SAS Controller..... So we just need something to probe the Temps the normal way.... even if the drives / controller / backplane... anything are detected as SAS....?? . Link to comment Share on other sites More sharing options...
mola Posted March 4, 2014 Share #434 Posted March 4, 2014 https://www.sitecom.com/file/ln-027v3-driver/exe/12620 How do I install the driver. This is network pci card. SITECOM LN-027 Sorry for my broken english thx mola Link to comment Share on other sites More sharing options...
shadi1989 Posted March 5, 2014 Share #435 Posted March 5, 2014 Does anyone made a vmware esxi version from the beta7 ??? Link to comment Share on other sites More sharing options...
Hjnas Posted March 6, 2014 Share #436 Posted March 6, 2014 hi Trantor, Do u get a chance to check and fix the cifs mount from ds? It still not work on the a7 release. Thx Link to comment Share on other sites More sharing options...
ALAMAPSTIEKS Posted March 6, 2014 Share #437 Posted March 6, 2014 Hi, it seems WD Red 4TB drives are not supported, not sure if this is a driver issue? But could this be added to your list please? Thx Link to comment Share on other sites More sharing options...
Raymond03 Posted March 6, 2014 Share #438 Posted March 6, 2014 driver request for Dell Perc h710p raid card. thanks Link to comment Share on other sites More sharing options...
andymiller6891 Posted March 7, 2014 Share #439 Posted March 7, 2014 Driver request for an adaptec 5805 raid card https://www.adaptec.com/en-us/support/r ... /sas-5805/ thanks. Link to comment Share on other sites More sharing options...
audivv Posted March 7, 2014 Share #440 Posted March 7, 2014 Hello my professor: Could you please add VIA C7 1G cpu to the driver pack? Coz I test the lastest beta7, and my mainboard can not be OK, , so please help me out~ Thanks a a a a a a aa .... lot! Here's the description of the X86 1G CPU: http://www.via.com.tw/en/products/processors/c7/ Link to comment Share on other sites More sharing options...
Panja Posted March 7, 2014 Share #441 Posted March 7, 2014 Can I use beta7 to update my ESXi v1.1 build? Using the v1.1 ESXi build atm running 3810 update 4. Link to comment Share on other sites More sharing options...
stanza Posted March 7, 2014 Share #442 Posted March 7, 2014 Hello my professor: Could you please add VIA C7 1G cpu to the driver pack? Coz I test the lastest beta7, and my mainboard can not be OK, , so please help me out~ Thanks a a a a a a aa .... lot! Here's the description of the X86 1G CPU: http://www.via.com.tw/en/products/processors/c7/ Is that a 64bit CPU? . Link to comment Share on other sites More sharing options...
florfilla19 Posted March 7, 2014 Share #443 Posted March 7, 2014 (edited) Hi Trantor, foa many thanks fo you work on developpement Could you please look for add full RTL8111E and MARVEL YUKON 88E8056 support on dsm (4.3-3827) ? 1st Motherboard: MSI E350IS-E45 Realtek PCI-E GbLAN controller RTL8111E Similar problem mentionned here : viewtopic.php?f=13&t=1531 -------- 2nd Motherboard: SHUTTLE K45 Marvell® 88E8056 network controller Original request mentionned here : viewtopic.php?f=14&t=555&start=150 Can you compile kernel to add these drivers for both of them ? Thanks Edited March 7, 2014 by Guest Link to comment Share on other sites More sharing options...
wenlez Posted March 7, 2014 Share #444 Posted March 7, 2014 Hi, it seems WD Red 4TB drives are not supported, not sure if this is a driver issue? But could this be added to your list please? Thx why do you say it's not supported? does Xpenology not able to detect the drives? does other hard drive work? Link to comment Share on other sites More sharing options...
andymiller6891 Posted March 7, 2014 Share #445 Posted March 7, 2014 is there no way of firing in drivers once installed like with SSH?? Link to comment Share on other sites More sharing options...
MarsManden Posted March 8, 2014 Share #446 Posted March 8, 2014 Hi, it seems WD Red 4TB drives are not supported, not sure if this is a driver issue? But could this be added to your list please? Thx why do you say it's not supported? does Xpenology not able to detect the drives? does other hard drive work? @ALAMAPSTIEKS - 4TB WD Red is supported. My system (see my sig) is running on 5 of them - and has been for the last 4 month. Link to comment Share on other sites More sharing options...
gebing Posted March 8, 2014 Share #447 Posted March 8, 2014 Can you build a snd-hda-intel.ko, sound card driver for intel ALC662/882. Link to comment Share on other sites More sharing options...
luxelan Posted March 8, 2014 Share #448 Posted March 8, 2014 Hello, maybe not the right place to post but I would appreciate any help on this issue: while my ethernet connection (LAN1) seems to be working properly, no activity is shown in resources monitor under 4.3-3810 update 4. The main purpose to my server is to run PLEX on it, which is happening quite well at the moment. Any suggestions? Thnks folks. Link to comment Share on other sites More sharing options...
stanza Posted March 8, 2014 Share #449 Posted March 8, 2014 Hello, maybe not the right place to post but I would appreciate any help on this issue: while my ethernet connection (LAN1) seems to be working properly, no activity is shown in resources monitor under 4.3-3810 update 4. The main purpose to my server is to run PLEX on it, which is happening quite well at the moment. Any suggestions? Thnks folks. How many LAN ports do you have? Link to comment Share on other sites More sharing options...
audivv Posted March 8, 2014 Share #450 Posted March 8, 2014 Hello my professor: Could you please add VIA C7 1G cpu to the driver pack? Coz I test the lastest beta7, and my mainboard can not be OK, , so please help me out~ Thanks a a a a a a aa .... lot! Here's the description of the X86 1G CPU: http://www.via.com.tw/en/products/processors/c7/ Is that a 64bit CPU? . no, it's 32bit x86 cpu as far as I know, can we do it? Link to comment Share on other sites More sharing options...
Recommended Posts