seyed Posted February 25, 2014 Share #401 Posted February 25, 2014 Hello there, i have Intel Atom D525 CPU on my PC an i wanted to install in VMWare Workstation 10.. When starting "XPEnology DS3612xs DSM 4.3 build 3810++ (repack v1.0)" i get the message "This kernel requires an x86-64 cpu, but only detected i686 CPU. Unable to boot - please use a Kernel appropriate for your CPU. I think the CPU is good enough but virtualizing is the problem. Can you tell me some expirience or can i do smething now? Maybe another virtualizing software or settings in VMWare? Regards, Kurt Hi the problem is that your CPU doesn't support VT-d instructions so you cannot install this x86-64 version. Intel® Virtualization Technology (VT-x) No Intel® Virtualization Technology for Directed I/O (VT-d) No source : http://ark.intel.com/products/49490 you have to install x86 version viewtopic.php?f=14&t=800 Link to comment Share on other sites More sharing options...
smirdex Posted February 25, 2014 Share #402 Posted February 25, 2014 Hi. I need this driver Bus 001 Device 003: ID 050d:2103 Belkin Components F7D2102 802.11n N300 Micro Wireless Adapter v3000 [Realtek RTL8192CU] https://wikidevi.com/wiki/Belkin_F7D2102 http://wireless.kernel.org/en/users/Drivers/rtl819x ftp://WebUser:AxPL9s3k@23.251.207.30/cn ... 130911.zip and for bluetooth ORICO BTA-402 CSR8510 Bus 001 Device 007: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Link to comment Share on other sites More sharing options...
seyed Posted February 25, 2014 Share #403 Posted February 25, 2014 same issue here but with DSM 4.3 3810 update 4 and synoboot pre v1.1 beta 5 /var/log/messages : iwlwifi: Unknown symbol pv_irq_ops (err 0) I will recompil all wifi drivers based on beta6. oh great, I am waiting for it Hi I just upgrade to the last DSM 4.3 build with pre 1.1 beta 7 synoboot but wifi driver for my mobo (Gigabyte GA-H77-N-WIFI) is still not working. Maybe you didn't compile the iwlwifi driver ? FYI, Wireless Nic is Intel Centrino Wireless-N 2230, it also supports Bluetooth 4.0 Link to comment Share on other sites More sharing options...
snoopy78 Posted February 25, 2014 Share #404 Posted February 25, 2014 hi trantor, is it possible to add the tweak about max no of disks into the pat file? i currently use a SC836 chassis with an lsi-9201-16i and x8sil-f mobo. so totally i could have 16 + 6 sata drives, currently i have 13 hdds (3x 4tb wd red SHR1, 5x 2TB HD204UI SHR1, 5x 1,5 WD15EADS SHR1) + 1 SSD (Segate 128GB) in the chassis connected with last update i experienced some issues as follows (had this issue similar also in 4.3 beta 5) - after upgrade "migrate" install only 6 of my 14 drives are discovered => after copying my "modified" synoinfo.conf (viewtopic.php?f=2&t=2028) all HDDs are discovered, but won't get initialized (i also modded the "sysctl.conf" to fasten up the raid rebuild) => after reboot of system the hdd's are in initialized stated EXCEPT that the system crashes immediately after bootup ===> see video of bootup & chrash https://www.dropbox.com/s/j1ubzjovyokui55/3.avi troubleshooting was to remove my volume 4 (5x 1,5 TB R5) and insert it one by one (after each insert do a reboot) till i reach disk #4, then the issue occur again => so i removed the hdds of the volume and setted up the system again => works fine ==> now i inserted all 5 disks into my backup/recovery/test system (HP ML310 + IBM M1015 IT Flash HBA) and install your beta7 there agian ===> after reboot volume 4 is up with 4 of 5 disks, so i could access and backup my last unsaved date ( i had done a full backup of volume 4 last weekend onto my real ds-1812+ (8x3 TB R6) ) ===> afterwards i plugged all 5 disks again into my SC836 and created a new volume, which now works fine so all in all it took my 1 night&day to update and recover data also, i just bought some additional qlogic 10G nics (QLE3242-sr-ck) to play around, can i use the current driver for the QLE82xx series which is included in beta6 upwards? also, i was reading about kernel from RS10613xs+, do you know if this is still moving onward? thx Link to comment Share on other sites More sharing options...
colombodk Posted February 25, 2014 Share #405 Posted February 25, 2014 This is an updated beta which include several updates/fixes. Changelog: v7 (24/02/2014) - Update to 4.3-3827 build - Synology DX510 is properly detected - Temporarily removed pata_legacy Trantor/anyone: Can someone please clarify: is the pata_legacy the driver which enable the Intel ICH7 chipset SATA/PATA-controller and the NM10 chipset/SATA-controller? Link to comment Share on other sites More sharing options...
cadre Posted February 26, 2014 Share #406 Posted February 26, 2014 @colombodk I can't speak for the NM10 chipset, but for the ICH7R chipset SATA/PATA controller used in the intel ss4200 the pata_legacy is the only driver that I've found will work for it in all current versions of Ubuntu or Debian. You can use a live CD to load and query for loaded drivers to verify. Link to comment Share on other sites More sharing options...
stanza Posted February 26, 2014 Share #407 Posted February 26, 2014 hi trantor, is it possible to add the tweak about max no of disks into the pat file? i currently use a SC836 chassis with an lsi-9201-16i and x8sil-f mobo. so totally i could have 16 + 6 sata drives, currently i have 13 hdds (3x 4tb wd red SHR1, 5x 2TB HD204UI SHR1, 5x 1,5 WD15EADS SHR1) + 1 SSD (Segate 128GB) in the chassis connected thx As I discovered, sometimes you have to choose create a volume several times before it actually creates a volume if you watch mdstat output you can see why eg cat /proc/mdstat In brackets you will see the number of drives that are in the MD0 and MD1 Mirror array... it might look like [uU.......] when you choose create volume it might grab another couple of drives and add them to the mirror's eg [uUUU.....] just keep going until you have your 14 drives there (can cound 14 x U's) [uUUUUUUUUUUUUU..] then the volume SHOULD create successfully and survive a reboot. Link to comment Share on other sites More sharing options...
vlad_dar Posted February 26, 2014 Share #408 Posted February 26, 2014 Please, add network and other drivers for Hyper-V virtualization support Link to comment Share on other sites More sharing options...
snoopy78 Posted February 26, 2014 Share #409 Posted February 26, 2014 hi trantor, is it possible to add the tweak about max no of disks into the pat file? i currently use a SC836 chassis with an lsi-9201-16i and x8sil-f mobo. so totally i could have 16 + 6 sata drives, currently i have 13 hdds (3x 4tb wd red SHR1, 5x 2TB HD204UI SHR1, 5x 1,5 WD15EADS SHR1) + 1 SSD (Segate 128GB) in the chassis connected thx As I discovered, sometimes you have to choose create a volume several times before it actually creates a volume ... then the volume SHOULD create successfully and survive a reboot. hi stanza, the issue did occur ONLY after upgading / installing the dsm.pat file and after 1st reboot yesterday i did plug these 5 hdds back into the system (while it was running) and created a new volume (so destroyed the old one) and now the volume works fine and survives reboot i currently restore my data from this volume i undestand, that if the volume isn't fine, that the system can't access it, but why i got a shutdown and reboot? also i had to reinstall afterwards the .pat file again as the system crashed.... so for me for future workaround must be to remove this volume physically and manually backup/recover the data (it's only max 6 tb i don't know if the issue is caused by the "old" hdds (which are about 4 1/2 years old from my old qnap ts-509pro (bought mid 2009) but last smart was fine) if so i will by new wd red 4tb or seagate nas 4 tb but would need to be sure, that this won't happen again is there maybe a way to manually initialize the hdd's via cli? p.s. this is my proc/mdstat " DS-SC836> cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md3 : active raid5 sdr5[0] sdq5[2] sds5[3] 7804567296 blocks super 1.2 level 5, 64k chunk, algorithm 2 [3/3] [uUU] md5 : active raid5 sdh5[0] sdl5[4] sdk5[3] sdj5[2] sdi5[1] 5841614592 blocks super 1.2 level 5, 64k chunk, algorithm 2 [5/5] [uUUUU] md4 : active raid5 sdn5[0] sdg5[4] sdp5[5] sdo5[2] sdm5[1] 7795118592 blocks super 1.2 level 5, 64k chunk, algorithm 2 [5/5] [uUUUU] md2 : active raid1 sde5[0] 120301632 blocks super 1.2 [1/1] md1 : active raid1 sde2[0] sdg2[1] sdh2[9] sdi2[12](S) sdj2[13](S) sdk2[11] sdl2[10] sdm2[2] sdn2[3] sdo2[4] sdp2[5] sdq2[6] sdr2[7] sds2[8] 2097088 blocks [12/12] [uUUUUUUUUUUU] md0 : active raid1 sde1[0] sdg1[1] sdh1[9] sdi1[12](S) sdj1[13](S) sdk1[11] sdl1[10] sdm1[2] sdn1[3] sdo1[4] sdp1[5] sdq1[6] sdr1[7] sds1[8] 2490176 blocks [12/12] [uUUUUUUUUUUU] unused devices: DS-SC836> " Link to comment Share on other sites More sharing options...
mactron Posted February 26, 2014 Share #410 Posted February 26, 2014 Since i updated to Beta7 Push Notification is broken for me. Does anybody else have the problem? Link to comment Share on other sites More sharing options...
seyed Posted February 26, 2014 Share #411 Posted February 26, 2014 Since i updated to Beta7 Push Notification is broken for me. Does anybody else have the problem? For me push notification didn't work correctly at all until I changed serial number. After this, it's completely broken and its activation is impossible. Link to comment Share on other sites More sharing options...
mugen888 Posted February 28, 2014 Share #412 Posted February 28, 2014 If i write the image onto the usb stick and boot it up then install the .Pat over my existing 4.3 install will it wipe my configurations? Is this the way to upgrade the system? Any can help is much appreciated. Link to comment Share on other sites More sharing options...
gn898040 Posted February 28, 2014 Share #413 Posted February 28, 2014 please add marvell yukon 88e8039 pci-e fast ethernet controller driver Link to comment Share on other sites More sharing options...
wolf7610 Posted February 28, 2014 Share #414 Posted February 28, 2014 (edited) Hi everybody! I try to setup 7-BETA from Trantor (hba) viewtopic.php?f=2&t=1361&start=360#p12750 on my IBMx346 with ServeRAID-7k scsi adapter. Computer crashed after words : Autodetecting XPEnology RAID arrays. Scanned 0 and added 0 devices. autorun ... autorun DONE. Video : https://drive.google.com/file/d/0Bzs_u2 ... sp=sharing I tried other versions of XPEnology with this adapter and scsi disks and always got "Server error (Error 38)" (it's not real text, I saw it in russian ). I tried other versions with pata disks and installation was successful. I boot from Live-CD GRML (kernel 3.10) and I see this raid-controller with virtual disks. Dmesg from this booting is here: https://drive.google.com/file/d/0Bzs_u2 ... sp=sharing Can XPEnology GURUS help me with this problem? RHEL drivers for this controller : https://drive.google.com/file/d/0Bzs_u2 ... sp=sharing Edited February 28, 2014 by Guest Link to comment Share on other sites More sharing options...
snoopy78 Posted February 28, 2014 Share #415 Posted February 28, 2014 hi trantor, also, i just bought some additional qlogic 10G nics (QLE3242-sr-ck) to play around, can i use the current driver for the QLE82xx series which is included in beta6 upwards? thx => recieved my 2 QLE3242 NIC's yesterday and both are working with current Beta 7 Link to comment Share on other sites More sharing options...
Darkstar1 Posted February 28, 2014 Share #416 Posted February 28, 2014 Hi All, please add the drivers for the Adaptec ASR-5085Z (flashed from Sun 375-3536) https://www.adaptec.com/en-us/support/raid/sas_raid/sas-5085 Thank you in advance DarkStar Link to comment Share on other sites More sharing options...
smirdex Posted February 28, 2014 Share #417 Posted February 28, 2014 Audio Realtek® ALC887 (GA-C1037UN-EU). Driver download link: http://goo.gl/b6IX I want my NAS can play music directly. Link to comment Share on other sites More sharing options...
colombodk Posted February 28, 2014 Share #418 Posted February 28, 2014 Trantor, Please include the pata_legacy again in your next (beta)version, thank you! Link to comment Share on other sites More sharing options...
fabrisio_06 Posted March 1, 2014 Share #419 Posted March 1, 2014 Hi everybody, Just a big thank you for Trantor ! I've updated my hp proliant G7 ( 4.3 3810> 4.3 3827 ) and everything work properly. Good job Link to comment Share on other sites More sharing options...
disruptorx Posted March 1, 2014 Share #420 Posted March 1, 2014 Great work in the Beta 7, I see there is an option for cross site forgery attacks. anyway after installing this I cant connect to the box with WinSCP on SCP. has root access to the OS files been restricted after the update? Thanks in advance Link to comment Share on other sites More sharing options...
nrupalp Posted March 1, 2014 Share #421 Posted March 1, 2014 I cant get my N54l to take the update. I go to Control panel, DSM Update and select the beta7 pat file downloaded from this thread. I get unknown error occurs (error no 21) Link to comment Share on other sites More sharing options...
snoopy78 Posted March 1, 2014 Share #422 Posted March 1, 2014 I cant get my N54l to take the update. I go to Control panel, DSM Update and select the beta7 pat file downloaded from this thread. I get unknown error occurs (error no 21) Installed the boot image first? Link to comment Share on other sites More sharing options...
nrupalp Posted March 1, 2014 Share #423 Posted March 1, 2014 I didnt do that..How do I do it? Link to comment Share on other sites More sharing options...
snoopy78 Posted March 1, 2014 Share #424 Posted March 1, 2014 read this ... then you'll know viewtopic.php?f=2&t=17 Link to comment Share on other sites More sharing options...
Friese Posted March 2, 2014 Share #425 Posted March 2, 2014 Update DSM to 4.3-3827 build, please update your system to fix security issues in previous version. Hi Trantor, what is your prefered update procedure from beta5 while keeping all data on the drives? My point of view is: 1.) boot up with the new beta7 USB stick 2.) modify /boot/grub/grub.conf with correct mac/serial 3.) install new beta 7 *.pat file manually under dsm update This should keep all drives, right? Link to comment Share on other sites More sharing options...
Recommended Posts