stanza Posted February 10, 2014 Share #301 Posted February 10, 2014 is this controller supported?HP Smart Array E200 http://h18004.www1.hp.com/products/serv ... arraye200/ ewwwww dont use THAT, they are slow slow slow...... . Link to comment Share on other sites More sharing options...
seyed Posted February 10, 2014 Share #302 Posted February 10, 2014 with synoboot pre v1.1 v3 driver for ax8879 is not present driver fro rt28000usb doesn't work I will add all modules in next beta. Regarding WiFi driver, how will I know which wifi driver I will copy to modules. Im using 4.3 My motherboard is zotac h87 with an onboard wifi. Also can you have driver for bluetooth. TP-Link wn725n v2http://wikidevi.com/wiki/TP-LINK_TL-WN725N_v2 Boot on ubuntu livecd to find out which modules you need. See next post about SCSi/SAS controllers Hi Trantor, I already know my wifi driver that is iwlwifi.ko I have already copied this to /lib/modules/ but when i try to execute this command : insmod iwlwifi.ko i have this error: "insmod: can't insert 'iwlwifi.ko': unknown symbol in module, or unknown parameter" What could be the problem and how will i resolve it? By the way im using DSM5.0 Beta. Thank you. same issue here but with DSM 4.3 3810 update 4 and synoboot pre v1.1 beta 5 /var/log/messages : iwlwifi: Unknown symbol pv_irq_ops (err 0) Link to comment Share on other sites More sharing options...
snoopy78 Posted February 10, 2014 Share #303 Posted February 10, 2014 hi trantor, this may be an unexpected approach and i don't know if it's a driver request. in viewtopic.php?f=2&t=2316&p=11780#p11780 i discuss about an issue i'm currently experiencing. Maybe you had experienced something like that too. Do you maybe know how the akeup scheduler works exactely? It seems to write some values into the NVRAM.. Otherwise could you help to integrate the Mainboards RTC into the DSM as of then i could use a script to run the wakup. unfortunately there is no /dev/rtc0.. BR snoopy78 Link to comment Share on other sites More sharing options...
verlaanac Posted February 12, 2014 Share #304 Posted February 12, 2014 Hi Guys, I was just wondering if this NIC is also included in the Beta 5 version: Qualcomm Atheros AR8171 Thanks! Link to comment Share on other sites More sharing options...
Trantor Posted February 12, 2014 Author Share #305 Posted February 12, 2014 Please add driver support for the Adaptec 3405 raid controller to the DSM 5.0 beta. It's handled by the aacraid driver included in 4.3 builds. For now DSM 5.0 beta doesn't include any scsi/sas driver, I will wait for stable release. I'm using Beta 5 without any problems until now. Can you explain, under which condistions the mentioned grub error 17 occurs? It's only happening during installation on first reboot. (it's erase the usb stick) same issue here but with DSM 4.3 3810 update 4 and synoboot pre v1.1 beta 5 /var/log/messages : iwlwifi: Unknown symbol pv_irq_ops (err 0) I will recompil all wifi drivers based on beta6. in viewtopic.php?f=2&t=2316&p=11780#p11780 i discuss about an issue i'm currently experiencing. Maybe you had experienced something like that too. Do you maybe know how the akeup scheduler works exactely? It seems to write some values into the NVRAM.. Otherwise could you help to integrate the Mainboards RTC into the DSM as of then i could use a script to run the wakup. unfortunately there is no /dev/rtc0.. I will look for rtc device I was just wondering if this NIC is also included in the Beta 5 version: Qualcomm Atheros AR8171 It's the alx driver and it's included since v1.0 Link to comment Share on other sites More sharing options...
verlaanac Posted February 12, 2014 Share #306 Posted February 12, 2014 Hi Trantor! Cool, then I will order myself an ASROCK B85M-ITX to do the job! Another question though: I'd like my disks to only contain data, and no OS. Would it be possible to boot from one USB stick, and install the DSM on another? Maybe using an eSATA DOM / SSD might work? This way I would keep everything nice and separated Thanks! Link to comment Share on other sites More sharing options...
matt4542 Posted February 12, 2014 Share #307 Posted February 12, 2014 Hi Trantor, I already know my wifi driver that is iwlwifi.ko I have already copied this to /lib/modules/ but when i try to execute this command : insmod iwlwifi.ko i have this error: "insmod: can't insert 'iwlwifi.ko': unknown symbol in module, or unknown parameter" What could be the problem and how will i resolve it? By the way im using DSM5.0 Beta. Thank you. same issue here but with DSM 4.3 3810 update 4 and synoboot pre v1.1 beta 5 /var/log/messages : iwlwifi: Unknown symbol pv_irq_ops (err 0) Same here. DSM 4.3 3810 Update 4. Link to comment Share on other sites More sharing options...
XPEH Posted February 12, 2014 Share #308 Posted February 12, 2014 Hi Trantor! Cool, then I will order myself an ASROCK B85M-ITX to do the job! Another question though: I'd like my disks to only contain data, and no OS. Would it be possible to boot from one USB stick, and install the DSM on another? Maybe using an eSATA DOM / SSD might work? This way I would keep everything nice and separated Thanks! That's not how synology works. Link to comment Share on other sites More sharing options...
verlaanac Posted February 13, 2014 Share #309 Posted February 13, 2014 Hmm that is too bad... Can you elaborate a little on how it does work? Thx Link to comment Share on other sites More sharing options...
XPEH Posted February 13, 2014 Share #310 Posted February 13, 2014 Hmm that is too bad... Can you elaborate a little on how it does work? Thx Please review my previous posts. It has been explained many times. Link to comment Share on other sites More sharing options...
verlaanac Posted February 13, 2014 Share #311 Posted February 13, 2014 Hi XPEH, I've found your post on it: Yes. Every hard drive has a small hidden partition(s) where OS from the .pat file is installed. Disk shown as "initialized" and ready to use remaining space for creating data volumes after OS is installed on them. But I do have another question: If I have 1 mirrored drive (2TB) and create 1 volume on it, and I also want 1 unprotected drive of 4 TB (so single drive) can I create this without problems in DSM? I need 1 volume protected for private data, and 1 volume just for media purposes. THanks! Link to comment Share on other sites More sharing options...
GdP38 Posted February 13, 2014 Share #312 Posted February 13, 2014 Is the support of A85X (Hudson D4) AMD chipset planned? It could be very interesting, because some motherboards based on this chipset have a lot of SATA ports. They are also not too expensive. Link to comment Share on other sites More sharing options...
XPEH Posted February 13, 2014 Share #313 Posted February 13, 2014 But I do have another question:If I have 1 mirrored drive (2TB) and create 1 volume on it, and I also want 1 unprotected drive of 4 TB (so single drive) can I create this without problems in DSM? I need 1 volume protected for private data, and 1 volume just for media purposes. THanks! You can create it as custom separate volume2 without RAID and protection by selecting one drive only, but it still needs to be initialized (system partition installed) before rest of the space become available for volume creation. Alternatively you can connect it via USB. That will not require initialization, but still allow sharing. Link to comment Share on other sites More sharing options...
verlaanac Posted February 13, 2014 Share #314 Posted February 13, 2014 Okay, great thanks! Will try it as soon as the new mainboard arrives! Link to comment Share on other sites More sharing options...
Deynet Posted February 13, 2014 Share #315 Posted February 13, 2014 Please fix Sil3132 PCI eSata Card Support in 4.3/5.0. It works with 4.2, but not with 4.3/5.0!!! viewtopic.php?f=2&t=2269 Link to comment Share on other sites More sharing options...
Deynet Posted February 13, 2014 Share #316 Posted February 13, 2014 Please fix Sil3132 PCI eSata Card Support in 4.3/5.0. It works with 4.2, but not with 4.3/5.0!!! viewtopic.php?f=2&t=2269 Link to comment Share on other sites More sharing options...
Toshik Posted February 13, 2014 Share #317 Posted February 13, 2014 Are there images with Hyper-V drivers included? (4.2/4.3/5.0b) Link to comment Share on other sites More sharing options...
Toshik Posted February 13, 2014 Share #318 Posted February 13, 2014 Are there images with Hyper-V drivers included? (4.2/4.3/5.0b) Link to comment Share on other sites More sharing options...
verlaanac Posted February 13, 2014 Share #319 Posted February 13, 2014 Hi, Just received the board, unfortunately it is not working at all, it will not get past the attached SCSI removable disk, so I think the driver is not included? It is the B85 Express I think.. Any chance of getting a build that will support my device? It's a http://www.asrock.com/mb/Intel/B85M-ITX ... ifications Thanks!! Link to comment Share on other sites More sharing options...
verlaanac Posted February 13, 2014 Share #320 Posted February 13, 2014 Hi, Just received the board, unfortunately it is not working at all, it will not get past the attached SCSI removable disk, so I think the driver is not included? It is the B85 Express I think.. Any chance of getting a build that will support my device? It's a http://www.asrock.com/mb/Intel/B85M-ITX ... ifications Thanks!! Link to comment Share on other sites More sharing options...
verlaanac Posted February 13, 2014 Share #321 Posted February 13, 2014 Edit-- My bad, works now! --- Thanks!! Link to comment Share on other sites More sharing options...
verlaanac Posted February 13, 2014 Share #322 Posted February 13, 2014 Edit-- My bad, works now! --- Thanks!! Link to comment Share on other sites More sharing options...
seyed Posted February 14, 2014 Share #323 Posted February 14, 2014 same issue here but with DSM 4.3 3810 update 4 and synoboot pre v1.1 beta 5 /var/log/messages : iwlwifi: Unknown symbol pv_irq_ops (err 0) I will recompil all wifi drivers based on beta6. oh great, I am waiting for it Link to comment Share on other sites More sharing options...
seyed Posted February 14, 2014 Share #324 Posted February 14, 2014 same issue here but with DSM 4.3 3810 update 4 and synoboot pre v1.1 beta 5 /var/log/messages : iwlwifi: Unknown symbol pv_irq_ops (err 0) I will recompil all wifi drivers based on beta6. oh great, I am waiting for it Link to comment Share on other sites More sharing options...
tetris Posted February 14, 2014 Share #325 Posted February 14, 2014 Is the support of A85X (Hudson D4) AMD chipset planned?It could be very interesting, because some motherboards based on this chipset have a lot of SATA ports. They are also not too expensive. Have you tried with A85X chip yet? it's already been supported. Link to comment Share on other sites More sharing options...
Recommended Posts