Jump to content
XPEnology Community

Frage zu Migration


didimedes

Recommended Posts

Hallo liebe XPEnology Gemeinde.

 

Ich betreibe aktuell ein N54L mit DSM 5.2. Installiert sind 5 Festplatten im SHR Verbund.

 

Zu meiner Frage:

Kam günstig an ein Proliant Gen8 ran und überlege, wie ich das schnellstmöglich ohne Datenverlust migriere.

Würde es funktionieren wenn ich alles aus A ausbaue und in B einsetze?

 

Danke

 

PS: Hab das Forum schon durchforstet und keine Antwort gefunden.

Link to comment
Share on other sites

Ah okay sorry :grin:

 

Methode: Baremetal

 

Hatte bereits diese Anleitung von Synology gelesen, nur weis ich nicht ob das auf mich auch zutrifft.

https://www.synology.com/de-de/knowledgebase/DSM/tutorial/General/How_to_migrate_between_Synology_NAS_DSM_5_0_and_later?q_id=484〈=deu

 

lässt sich der SHR Verbund irgendwie übertragen ohne Datenverlust?

Link to comment
Share on other sites

Ah okay sorry :grin:

 

Methode: Baremetal

 

Hatte bereits diese Anleitung von Synology gelesen, nur weis ich nicht ob das auf mich auch zutrifft.

https://www.synology.com/de-de/knowledgebase/DSM/tutorial/General/How_to_migrate_between_Synology_NAS_DSM_5_0_and_later?q_id=484〈=deu

 

lässt sich der SHR Verbund irgendwie übertragen ohne Datenverlust?

 

so wie ich die englischen threads verstanden habe ja. Wen man den loader benutzt erkennt er bij de installation das schn daten drauf sind, mittels migraton sollte das gehen.

Steht aber weiter nicht viel druber im forum, backup machen und probieren ? :smile: Du willst den server auch Bare Metal betreiber oder esxi ?

Link to comment
Share on other sites

Hier haben schon viele erfoglreich von XPE auf DSM 6.0.2 migriert. Ich selber habe 2 ESXi XPE5.2 Installationen mit jeweils 4 Platten im SHR-Mode auf DSM6.0.2 mit Jun's Bootoader 1.0.1 gebracht.

 

Solange es Treiber für deinen SATA-Controller und die Netzwerkkarte für Dein System gibt, wird auch die Migration sauber klappen. Nachdem es im original Thread genug Rückmeldung zu erfolgreichen Baremetal-Installationen auf dem HP MS Gen8 gibt, sollte das das der Fall sein.

 

Afair, müsste der Baremetal-Boot auch die Default-Bootoption bei Jun's Bootloader sein.

 

Eine Garantie dafür das deine Migration problemlos funktionieren wird kann dir hier keine geben, die Erfahrung das es es das tut dagegen etliche :wink:

Link to comment
Share on other sites

Sollte gehen nur was wohl den anderen nicht aufgefallen ist wie bekommt man die 5. Platte in den Gen8 der kann nur 4x3,5 + 1x2,5 im odd ?

 

Gesendet von meinem PLK-L01 mit Tapatalk

 

Ist das nicht ein 5,25 Slot?

Trotzdem Vorsicht, der odd ist nur 3gb/s und nicht 6

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Danke für die Antworten.

Ich teste es die Tage, wenn mal Zeit da ist.

 

hier noch ein beispiel:

 

To add.....

 

both HP N40l and Gen8 Microservers were upgraded from "XPEnoboot 5.2-5967.1" to "Jun v1.01" boot loader

and when they booted up it asked if i wanted to migrate which i did, it then asked for a PAT file which i gave the latest PAT from Synology site for DSM DS3615xs

and both servers upgraded seamlessly from DSM 5.2 to DSM 6.0.

 

I obviously burnt the new image file to my boot USB's for both servers and set the VID, PID of each stick and the respective MAC's for each server.

 

It worked great.

 

Oh and on the HP n40l i chose to boot the AMD option which works great!!

 

http://xpenology.com/forum/viewtopic.php?f=2&t=20216&p=85189#p85189

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...