NVP107 Posted November 28, 2022 #1 Posted November 28, 2022 Sorry if I posted in the wrong section! Hello everyone, Need your help, I have an old Dell OptiPlex 390 i5-2500 2nd Gen, 16GB of RAM and (2)x3TB drives, motherboard has 4 SATA ports, it’s a generic Dell motherboard very basic. I would like to install DSM 6/7 on it to use it for backup/cloud sync. I was following instructions for DS920+ and DS3622xs+ I was able to install it and get the IP address but I’m getting “No drives detected” message”. I believe that my sata ports are not being recognized correctly. Also, I did check BIOS for Hot Swap/Plug options it’s not available it’s a dell very basic BIOS. Can this computer be used or it’s not compatible? I will only be using (2) drives, so I don’t care which DS model I use as longest it works and stable. Additional details USB was made using tinycore-redpill.v0.9.3.0 ./rploader.sh Version : 0.9.3.0 tc@box:~$ ./rploader.sh satamap now Computed settings: SataPortMap=1 DiskIdxMap=00 tc@box:~$ lspci -tvnnq -[0000:00]-+-00.0 Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] +-02.0 Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0102] +-16.0 Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] +-1a.0 Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] +-1b.0 Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] +-1c.0-[01]-- +-1c.2-[02]-- +-1c.4-[03]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] +-1d.0 Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] +-1f.0 Intel Corporation H61 Express Chipset Family LPC Controller [8086:1c5c] +-1f.2 Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller [8086:1c00] +-1f.3 Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] \-1f.5 Intel Corporation 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller [8086:1c08] Running: fdisk -l Disk /dev/sda: 2.73 TiB, 3000592982016 bytes, 5860533168 sectors Disk model: WDC WD30EFRX-68E Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: gpt Disk identifier: 7B499F80-44E5-4B50-A4F5-B58AD126E439 Device Start End Sectors Size Type /dev/sda1 128 4194304 4194177 2G Linux swap /dev/sda2 4194432 5860533134 5856338703 2.7T Solaris /usr & Apple ZFS Disk /dev/sdb: 2.73 TiB, 3000592982016 bytes, 5860533168 sectors Disk model: WDC WD30EZRX-00M Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: gpt Disk identifier: 9EDFA53C-F5D8-4D99-A218-49D24B42D473 Device Start End Sectors Size Type /dev/sdb1 128 4194304 4194177 2G Linux swap /dev/sdb2 4194432 5860533134 5856338703 2.7T Solaris /usr & Apple ZFS Big thank you to the developers this great!! Quote
Peter Suh Posted December 9, 2022 #2 Posted December 9, 2022 I recommend you to try M SHELL for TCRP FRIEND, which I developed. It has evolved a lot from the old TCRP and has been changed to enable loader builds using convenient MENU. A user guide is also shared on Github at the link below. https://github.com/PeterSuh-Q3/tinycore-redpill/releases/tag/v0.9.3.0-1 2 Quote
h0va4 Posted December 10, 2022 #3 Posted December 10, 2022 Ditto @Peter Suh! Worked like a charm. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.