badbad2000 Posted December 14, 2016 Share #276 Posted December 14, 2016 Please support Intel i211, should be under Igb but doesn't seems mentioned in the hw supported list Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
fennec Posted December 14, 2016 Share #277 Posted December 14, 2016 I just loaded esxi again just to verify it one more time. It work's without any issues. I'm using a hp gen8 microserver. Others with gen8 and esxi also got it working with ease. What is your hardware? If you want start a TeamViewer session and send me a pm with the details, I'll join and try to see what is happening. I have a HP gen7 microserver with 4GB RAM. It's not a big deal, I'll just wait for Quicknick's 2.3. Link to comment Share on other sites More sharing options...
rpmurph8411 Posted December 15, 2016 Share #278 Posted December 15, 2016 I see there is a request for this to work on Hyper-V which is what I current have Xpenology 5.2 install on. Does anyone know what kind of eta there is for this to work on Hyper-V? Sorry if that has already been asked. Link to comment Share on other sites More sharing options...
Masrawy Posted December 15, 2016 Share #279 Posted December 15, 2016 Hi there, I have 3 questions here from a newbie. 1. How do we access the XPEnology Configuration Tool? When I select the last option it brings me to the same screen as if I select any other option. 2. Why do I get "error: terminal 'serial' isn't found"? How to correct it? I already changed my PID & VID. 3. How do we enable SHR? Someone told me to do this below, but I can't find the file... edit: /etc.defaults/synoinfo.conf add: support_syno_hybrid_raid="yes" remove/comment out: supportraidgroup="yes" thanks Link to comment Share on other sites More sharing options...
Polanskiman Posted December 15, 2016 Share #280 Posted December 15, 2016 Hi there, I have 3 questions here from a newbie. 1. How do we access the XPEnology Configuration Tool? When I select the last option it brings me to the same screen as if I select any other option. 2. Why do I get "error: terminal 'serial' isn't found"? How to correct it? I already changed my PID & VID. 3. How do we enable SHR? Someone told me to do this below, but I can't find the file... edit: /etc.defaults/synoinfo.conf add: support_syno_hybrid_raid="yes" remove/comment out: supportraidgroup="yes" thanks Questions 1 and 3 are answered in the first 10 posts made by Quicknick so please read. Question 2 is implicitly answered as well but not directly. You need to enable serial in your bios and the error wont show. vid/pid is a complete different matter unrelated to serial. Link to comment Share on other sites More sharing options...
Masrawy Posted December 15, 2016 Share #281 Posted December 15, 2016 Hi there, I have 3 questions here from a newbie. 1. How do we access the XPEnology Configuration Tool? When I select the last option it brings me to the same screen as if I select any other option. 2. Why do I get "error: terminal 'serial' isn't found"? How to correct it? I already changed my PID & VID. 3. How do we enable SHR? Someone told me to do this below, but I can't find the file... edit: /etc.defaults/synoinfo.conf add: support_syno_hybrid_raid="yes" remove/comment out: supportraidgroup="yes" thanks Questions 1 and 3 are answered in the first 10 posts made by Quicknick so please read. Question 2 is implicitly answered as well but not directly. You need to enable serial in your bios and the error wont show. vid/pid is a complete different matter unrelated to serial. I'm sorry, but what's described for question 1 and 3 does not work, that's why I'm asking for more details or help. I read every post in the 29 pages... It's my first time trying XPEnology, while it could seem simple for some of you, it is not for someone who's doing it for the first time. And unfortunately, there is no tutorial yet. I cannot access Configuration Tool to enable SHR with it, and the other instruction provided in page 19 does not work... Can you please help me and give me more detailed steps to answer/solve my 3 questions? Thanks. Link to comment Share on other sites More sharing options...
Xeno Posted December 15, 2016 Share #282 Posted December 15, 2016 [Can you please help me and give me more detailed steps to answer/solve my 3 questions? Thanks. Look into this http://www.hdvietnam.com/threads/nang-cao-huong-dan-dung-mot-nas-xpenology-dsm-6-0-chay-tren-nen-pc.1269562/it's not in English, but easy to follow. Just scroll down you will fined what you are looking for. Read after Enable SSH service. I did and not to difficult. Use Google translate... Link to comment Share on other sites More sharing options...
quicknick Posted December 15, 2016 Author Share #283 Posted December 15, 2016 (edited) Hi there, I have 3 questions here from a newbie. 1. How do we access the XPEnology Configuration Tool? When I select the last option it brings me to the same screen as if I select any other option. 2. Why do I get "error: terminal 'serial' isn't found"? How to correct it? I already changed my PID & VID. 3. How do we enable SHR? Someone told me to do this below, but I can't find the file... edit: /etc.defaults/synoinfo.conf add: support_syno_hybrid_raid="yes" remove/comment out: supportraidgroup="yes" thanks Questions 1 and 3 are answered in the first 10 posts made by Quicknick so please read. Question 2 is implicitly answered as well but not directly. You need to enable serial in your bios and the error wont show. vid/pid is a complete different matter unrelated to serial. I'm sorry, but what's described for question 1 and 3 does not work, that's why I'm asking for more details or help. I read every post in the 29 pages... It's my first time trying XPEnology, while it could seem simple for some of you, it is not for someone who's doing it for the first time. And unfortunately, there is no tutorial yet. I cannot access Configuration Tool to enable SHR with it, and the other instruction provided in page 19 does not work... Can you please help me and give me more detailed steps to answer/solve my 3 questions? Thanks. 1. Like Planskiman said, all details are in post 1-10. I will not entertain many of these types questions as they are tiring. Information has been provided. However, I have noticed that this kernel included doesn't load everytime, but that is due to size of img. I increased size in next version. There was only 1.5mb free and updates cause corruption to accur due to lack of available space. 2. This isn't directly clear, but will add this to FAQs. 3. SHR is enabled by default in my loader, even if you previously had it disabled, it will be enabled. If you want to disable this, you must use XPEnology Configuration Tool as the way I enable it by default is different than just editi g synoinfo.conf and will automatically re-enable it the next time you boot. Sent from my SM-N920T using Tapatalk Edited December 15, 2016 by Guest Link to comment Share on other sites More sharing options...
quicknick Posted December 15, 2016 Author Share #284 Posted December 15, 2016 I see there is a request for this to work on Hyper-V which is what I current have Xpenology 5.2 install on. Does anyone know what kind of eta there is for this to work on Hyper-V? Sorry if that has already been asked. This is planned for a later date. First point is to get baremetal and vmware/kvm/xen working, then work can be done for hyper-v. This is because it needs to be compiled put of kernel tree and need don't have a hyperv box ready to test. Sent from my SM-N920T using Tapatalk Link to comment Share on other sites More sharing options...
snoopy78 Posted December 15, 2016 Share #285 Posted December 15, 2016 some stupid general question.. i use a supermicro motherboard with COM1 + COM2 enabled and remotely access the system via the IPKVM. However the console output is also stopping at the dedicated point, if i disable the com port i'll get the warning that no com is available. Are there any settings i must do to fully get the output again? Link to comment Share on other sites More sharing options...
Sagabo Posted December 15, 2016 Share #286 Posted December 15, 2016 Hi! Is it possible to just "pick up" a driver from this loader if im running Jun´s loader or do i have to re-install everything? I want a driver for RTL8153 so i get my usb3 to lan working, i have a working nic but i want to add a second one. Thanks for all your work, its much appreciated! Link to comment Share on other sites More sharing options...
Dreadnought Posted December 15, 2016 Share #287 Posted December 15, 2016 Hey quicknick, In dmesg log of my Acer H340 I found the following: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130328/hwxface-568) I think this in connection with the problem that I'm not able to shutdown my NAS. Everytime I try to shutdown the NAS it reboots afer aprox 5sec. The last version of XPenelogy without my reboot problem is 5.1-5055 @Polanskiman / @quicknick do you have some ideas? Link to comment Share on other sites More sharing options...
lachgame Posted December 15, 2016 Share #288 Posted December 15, 2016 I have been trying to install this on a baremetal gen 8 microserver but I keep getting the error Failed to install the file. The file is probably corrupted. (13)" I have made sure 100% that the vid and pid is correct and that the pat file is not corrupted but comparing md5. Can anyone assist? Thanks Link to comment Share on other sites More sharing options...
Bloppy Posted December 15, 2016 Share #289 Posted December 15, 2016 When will version 2.3 be released ? Link to comment Share on other sites More sharing options...
billat29 Posted December 15, 2016 Share #290 Posted December 15, 2016 When will version 2.3 be released ? Soon, soon. I am sure that quicknick won't know when it will be ready until it is ready and then the first post will be updated. Patience. Link to comment Share on other sites More sharing options...
quicknick Posted December 15, 2016 Author Share #291 Posted December 15, 2016 Hi! Is it possible to just "pick up" a driver from this loader if im running Jun´s loader or do i have to re-install everything? I want a driver for RTL8153 so i get my usb3 to lan working, i have a working nic but i want to add a second one. Thanks for all your work, its much appreciated! You can take drivers from this, but you won't get support. You are on your own. In jun's loader extra.lzma is the drivers ramdisk. In mine it is drivers.lzma. Make sure you add a rc.modules file or update jun's as I don't load drivers that way. Sent from my SM-N920T using Tapatalk Link to comment Share on other sites More sharing options...
backupking Posted December 15, 2016 Share #292 Posted December 15, 2016 I have been trying to install this on a baremetal gen 8 microserver but I keep getting the error Failed to install the file. The file is probably corrupted. (13)" I have made sure 100% that the vid and pid is correct and that the pat file is not corrupted but comparing md5. Can anyone assist? Thanks hi I got this running fine on a gen 8 microserver only issues drives must be in ext4 has most people know and it is not find data on external usb hard drive work fine on the jun release one this is just on a usb pen stick in side the machine very good so far backupking Link to comment Share on other sites More sharing options...
quicknick Posted December 15, 2016 Author Share #293 Posted December 15, 2016 I have been trying to install this on a baremetal gen 8 microserver but I keep getting the error Failed to install the file. The file is probably corrupted. (13)" I have made sure 100% that the vid and pid is correct and that the pat file is not corrupted but comparing md5. Can anyone assist? Thanks hi I got this running fine on a gen 8 microserver only issues drives must be in ext4 has most people know and it is not find data on external usb hard drive work fine on the jun release one this is just on a usb pen stick in side the machine very good so far backupking Btrfs is fixed in 2.3. I had a bad ecryptfs kernel module Sent from my SM-N920T using Tapatalk Link to comment Share on other sites More sharing options...
Sagabo Posted December 15, 2016 Share #294 Posted December 15, 2016 Hi! Is it possible to just "pick up" a driver from this loader if im running Jun´s loader or do i have to re-install everything? I want a driver for RTL8153 so i get my usb3 to lan working, i have a working nic but i want to add a second one. Thanks for all your work, its much appreciated! You can take drivers from this, but you won't get support. You are on your own. In jun's loader extra.lzma is the drivers ramdisk. In mine it is drivers.lzma. Make sure you add a rc.modules file or update jun's as I don't load drivers that way. Sent from my SM-N920T using Tapatalk Ok, thanks for your answer! I don´t think im the man for that job, but maybe someone else also wants this and could do a better job? Keep it up! Link to comment Share on other sites More sharing options...
cstout Posted December 15, 2016 Share #295 Posted December 15, 2016 Hardware: Dell OptiPlex 7010 SFF Install Type: Baremetal NIC Model: Broadcom, supported Storage: SATA, 1x500GB HDD Issue: Installation/Hard Drives Loader Version: 2.2 I am eager to test this new loader but I keep running into an error on the initial setup screen (see photo below). I only have one hard drive installed (HGST 500GB SATA) and the BIOS is configured for AHCI SATA operation mode and only the SATA-0 port is enabled in the BIOS. This is my XPE test box and has been fully compatible with ever other loader that's come across this website. I'm curious what the hangup is here. I was able to SSH into the configuration tool and ran the quick setup and also set the number of drives to 1 and I still get the pre-installation failure reporting, "We've detected errors on the hard drives (2,3,4,5,6), and the SATA ports have also been disabled. This error only slightly changes in drive numbering if I enable all (and unused) SATA ports. Not sure where to go from here but I wanted to post this issue in case anybody else doing a basic baremetal install is running into issues. Link to comment Share on other sites More sharing options...
filippo333 Posted December 15, 2016 Share #296 Posted December 15, 2016 I have been trying to install this on a baremetal gen 8 microserver but I keep getting the error Failed to install the file. The file is probably corrupted. (13)" I have made sure 100% that the vid and pid is correct and that the pat file is not corrupted but comparing md5. Can anyone assist? Thanks hi I got this running fine on a gen 8 microserver only issues drives must be in ext4 has most people know and it is not find data on external usb hard drive work fine on the jun release one this is just on a usb pen stick in side the machine very good so far backupking Btrfs is fixed in 2.3. I had a bad ecryptfs kernel module Sent from my SM-N920T using Tapatalk I have a quick question quicknick (no pun intended) I am currently using Jun's loader on my BTRFS volume, would upgrading to 2.3 require just re-imaging my boot USB and ensuring the same serial number, mac address etc are the same? In theory my Synology install volume and BTRFS partition should be picked up using a different bootloader correct? Link to comment Share on other sites More sharing options...
quicknick Posted December 15, 2016 Author Share #297 Posted December 15, 2016 I have a quick question quicknick (no pun intended) I am currently using Jun's loader on my BTRFS volume, would upgrading to 2.3 require just re-imaging my boot USB and ensuring the same serial number, mac address etc are the same? In theory my Synology install volume and BTRFS partition should be picked up using a different bootloader correct? Yes, your volume will be picked up. This has been tested. Link to comment Share on other sites More sharing options...
LeaderGL Posted December 15, 2016 Share #298 Posted December 15, 2016 is it possible to update the synology station directly from version DSM 5.0-4528 Update 2 to the DSM 6.0.2? Link to comment Share on other sites More sharing options...
ordimans Posted December 15, 2016 Share #299 Posted December 15, 2016 @LeaderHL : I did. Check on th Jun Loader topic. Link to comment Share on other sites More sharing options...
Dark Zydor Posted December 15, 2016 Share #300 Posted December 15, 2016 Hi ! With my asus P5N-D motherboard and its nVidia lan & storage chipset, you are my only remaining hope Quicknick ! In your opinion, is there any chance I test DSM 6.0 using your futur release or should buy a new motherboard ? In addition to the driver problem, my motherboard does not support AHCI. I guess it is linked with nvidia storage chipset. Is that a problem ? Thanks Link to comment Share on other sites More sharing options...
Recommended Posts