Rob_Quads Posted December 5, 2016 Share #1 Posted December 5, 2016 I've got the following disc setup running on a "DSM 5.2-5592 Update 4" system (going to be updating it once its back up and running) Onboard Sata 1 - SSD Onboard Sata 2 - SATA Spinning 1 Onboard Sata 3 - SATA Spinning 2 Onboard Sata 4 - PCI Card Sata 1 - SATA Spinning 3 PCI Card Sata 2 - SATA Spinning 4 I have all the spinning discs in a single volume. My PCI adapter is no longer being picked up and so my array is "crashed" as its costs 2 of its 4 discs. To try and recover temporarily the array I connected one of the discs from the PCI card into the onboard Sata4 connector. Its now picked up by the system but it sees it as un-initialised. Surely there is a way of it realising that its the missing disc of the array? Doe the discs get attached with a hard link to the adapter they are connected to and must always use that adapter? Link to comment Share on other sites More sharing options...
Rob_Quads Posted December 5, 2016 Author Share #2 Posted December 5, 2016 Hmm - So now I have managed to get the adapter working again and the discs are showing up but they are showing up as "no initialised" instead of part of the volume. Any ideas how to get the volume to pick them up Link to comment Share on other sites More sharing options...
Recommended Posts