use-nas Posted October 27, 2022 Share #1101 Posted October 27, 2022 Quote Link to comment Share on other sites More sharing options...
Green Posted October 27, 2022 Share #1102 Posted October 27, 2022 10 minutes ago, use-nas said: fbelavenuto said: I've changed the update system, then is necessary to burn the image again, the upload menu do not work from alpha to beta! Quote Link to comment Share on other sites More sharing options...
use-nas Posted October 27, 2022 Share #1103 Posted October 27, 2022 Ok Quote Link to comment Share on other sites More sharing options...
vinhnguyen Posted October 27, 2022 Share #1104 Posted October 27, 2022 12 hours ago, fbelavenuto said: Finally the beta version! https://github.com/fbelavenuto/arpl/releases/tag/v1.0-beta2 I've changed the update system, then is necessary to burn the image again, the upload menu do not work from alpha to beta! Thank you. My Intel I225-LM worked at this new version. But Network Status does not show parameters... My home network is 1Gbps and it has received enough. I don't have a 2.5Gbps switch see if it gets enough... Quote Link to comment Share on other sites More sharing options...
pocopico Posted October 27, 2022 Share #1105 Posted October 27, 2022 On 10/26/2022 at 4:31 AM, Peter Suh said: Ah, I misunderstood the PM of pocopico. The permanent solution was provided by you Is pocopico thinking about multi-reservation? Sorry. ^^ The powersched extension that includes the rtc-cmos module and fabios powersched command and execution scheduling has been created under my rp-ext repo. I have tested that but need more testing if you can help with that. 2 Quote Link to comment Share on other sites More sharing options...
RedwinX Posted October 27, 2022 Share #1106 Posted October 27, 2022 @IG-88 🤣🤣 you have to work for Synology support, you know more about DSM than Synology 😅😅 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted October 27, 2022 Share #1107 Posted October 27, 2022 (edited) 1 hour ago, pocopico said: The powersched extension that includes the rtc-cmos module and fabios powersched command and execution scheduling has been created under my rp-ext repo. I have tested that but need more testing if you can help with that. Does rtc-cmos and powersched always make sense to build together? Is powersched's core function for scheduling multi-power startup? Or should I just use powersched instead of rtc-cmos? Edited October 27, 2022 by Peter Suh Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted October 27, 2022 Share #1108 Posted October 27, 2022 (edited) @pocopico, @fbelavenuto APRL is of course also relevant, but is it okay to keep referring to the test for power reservation here? Maybe fabio will follow us up? Replaced rtc-cmos with powersched and set up multi-schedule. However, The value that initially set 18:55 minutes was changed to 1666864500. However, the setting value of 18:50 minutes earlier than that is not changed. please check. I'll check if it boots up at 18:55. And this is a script that converts the epoch to my time zone and shows it. Take advantage of it. while true; do echo $(date -d @`cat /sys/class/rtc/rtc0/wakealarm`); sleep 3; done Edited October 27, 2022 by Peter Suh Quote Link to comment Share on other sites More sharing options...
pocopico Posted October 27, 2022 Share #1109 Posted October 27, 2022 (edited) 1 hour ago, Peter Suh said: Does rtc-cmos and powersched always make sense to build together? Is powersched's core function for scheduling multi-power startup? Or should I just use powersched instead of rtc-cmos? Well its either the one or the other. Powersched extension though looks more solid. Lets move this discussion though to the power up schedule thread Edited October 27, 2022 by pocopico Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted October 27, 2022 Share #1110 Posted October 27, 2022 2 minutes ago, pocopico said: Well its either the one or the other. Powersched extension though looks more solid. Did you see the reporting right above? powersched is not behaving as expected. Is it possible to make multiple reservations? Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted October 27, 2022 Author Share #1111 Posted October 27, 2022 58 minutes ago, Peter Suh said: Did you see the reporting right above? powersched is not behaving as expected. Is it possible to make multiple reservations? Thanks for the tests, I did it quickly to help @pocopico but it will definitely need tweaking. The software was made with multiple reservations in mind. 1 Quote Link to comment Share on other sites More sharing options...
pocopico Posted October 27, 2022 Share #1112 Posted October 27, 2022 6 minutes ago, fbelavenuto said: Thanks for the tests, I did it quickly to help @pocopico but it will definitely need tweaking. The software was made with multiple reservations in mind. @Peter Suh The powersched is scheduled to run every 60 seconds and set the wake alarm. You wll have to wait maximum one minute before checking the value of wakealarm. 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted October 27, 2022 Share #1113 Posted October 27, 2022 15 minutes ago, pocopico said: @Peter Suh The powersched is scheduled to run every 60 seconds and set the wake alarm. You wll have to wait maximum one minute before checking the value of wakealarm. Ok, I'll test again. Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted October 27, 2022 Share #1114 Posted October 27, 2022 34 minutes ago, pocopico said: @Peter Suh The powersched is scheduled to run every 60 seconds and set the wake alarm. You wll have to wait maximum one minute before checking the value of wakealarm. @pocopico It always reacts only to the first PowerOn Task 0 scheduler. The second, PowerOn Task 1, changed the time and waited for more than 1 minute, but there was no change. 1 Quote Link to comment Share on other sites More sharing options...
RedwinX Posted October 27, 2022 Share #1115 Posted October 27, 2022 (edited) 6 hours ago, RedwinX said: @IG-88 🤣🤣 you have to work for Synology support, you know more about DSM than Synology 😅😅 Edited October 27, 2022 by RedwinX Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted October 27, 2022 Share #1116 Posted October 27, 2022 2 hours ago, pocopico said: @Peter Suh The powersched is scheduled to run every 60 seconds and set the wake alarm. You wll have to wait maximum one minute before checking the value of wakealarm. I finally succeeded in multi-booking. I changed "task 1" to 23:13 minutes Again I changed "task 0" to 23:02 minutes, both work. 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted October 27, 2022 Share #1117 Posted October 27, 2022 (edited) 30 minutes ago, Peter Suh said: I finally succeeded in multi-booking. I changed "task 1" to 23:13 minutes Again I changed "task 0" to 23:02 minutes, both work. The time setting seems to be normal. But, why doesn't it start at 23:13? What should I check again? Sorry. The power was turned off at 23:03. I'll try again.^^ Edited October 27, 2022 by Peter Suh Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted October 27, 2022 Share #1118 Posted October 27, 2022 26 minutes ago, Peter Suh said: The time setting seems to be normal. But, why doesn't it start at 23:13? What should I check again? Sorry. The power was turned off at 23:03. I'll try again.^^ @pocopico 23:47 Power On 23:50 Power Off 23:53 Power On 23:56 Power Off I tested it like this. The first boot came up, There is no news on the 2nd boot. Is it because it shuts down in too short a time after the first boot? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted October 27, 2022 Share #1119 Posted October 27, 2022 (edited) 23 minutes ago, Peter Suh said: @pocopico 23:47 Power On 23:50 Power Off 23:53 Power On 23:56 Power Off I tested it like this. The first boot came up, There is no news on the 2nd boot. Is it because it shuts down in too short a time after the first boot? @pocopico At around 4 minutes, powersched searches for the next schedule and sets it. I tested it every 5 minutes, and it was confirmed that the time of the second schedule changed after the first boot. 00:05 Power On 00:10 Power Off 00:15 Power On 00:20 Power Off However, the first boot is also The second boot did not boot at the expected 00:15. Edited October 27, 2022 by Peter Suh Quote Link to comment Share on other sites More sharing options...
jetca Posted October 27, 2022 Share #1120 Posted October 27, 2022 (edited) Hi , I am updating DSM6 (Jun's loader) to DSM7 ( ARPL ) runing in ESXi 7. The problem I have is the disk order. The disk order works pretty well with DSM6 loader, but not good with DSM7 loader. my setting: Dell R730xd, with 12x 3.5" drives, and 2x 2.5" drives. H730 flashed to HBA330, passthrough all drive to DSM virtual machine. ESXi: 7.0 update 3 DSM 6.2.3 (25426): synoboot drive at sata0 (0:0) synodata drive at sata1 (1:0) all hard drives: passthrough by HBA330 grub.cfg setting: sata_args='sata_uid=1 sata_pcislot=5 synoboot_satadom=1 DiskIdxMap=1819 SataPortMap=1 SasIdxMap=0' With this DiskIdxMap=1819 SataPortMap=1 SasIdxMap=0 setting, Everything works pretty well, the disk number in DSM6 starting from 1 to 12 for 3.5", 13 and 14 for 2.5" drive. and synoboot and synodata drives are hidden. Empty bay will not be taken by the other drives. for example, I put disks in 3.5" bay #1,#2,#3,#12, and #1, #2 in 2.5" bay, then the disk numbers in DSM6 are shown as disk 1,2,3,12,13, 14 but when I booted with DSM7 (update 42962) with ARPL loader (v0.5-alpha1), ARPL boot drive at sata0 (0:0) synodata drive at sata1 (1:0) all hard drives: passthrough by HBA330 the old DiskIdxMap=1819 SataPortMap=1 SasIdxMap=0 setting cannot work. system cannot detect any drive. i changed to following setting suggested by running tool in tinycore load "rpload.sh satamap now" SataPortMap: 18 DiskIdxMap: 1000 SasIdxMap: 0 then the drives are listed with wrong order. the empty bays are ignored. for example, I put disks in bay #1,#2,#3,#12,#13,#14, then the disk numbers in DSM6 are 10,11,12,13,14,15, with disk 1 for the syno data drive. anyone know how to fix it? Thanks. Edited October 27, 2022 by jetca Quote Link to comment Share on other sites More sharing options...
pocopico Posted October 27, 2022 Share #1121 Posted October 27, 2022 59 minutes ago, jetca said: Hi , I am updating DSM6 (Jun's loader) to DSM7 ( ARPL ) runing in ESXi 7. The problem I have is the disk order. The disk order works pretty well with DSM6 loader, but not good with DSM7 loader. my setting: Dell R730xd, with 12x 3.5" drives, and 2x 2.5" drives. H730 flashed to HBA330, passthrough all drive to DSM virtual machine. ESXi: 7.0 update 3 DSM 6.2.3 (25426): synoboot drive at sata0 (0:0) synodata drive at sata1 (1:0) all hard drives: passthrough by HBA330 grub.cfg setting: sata_args='sata_uid=1 sata_pcislot=5 synoboot_satadom=1 DiskIdxMap=1819 SataPortMap=1 SasIdxMap=0' With this DiskIdxMap=1819 SataPortMap=1 SasIdxMap=0 setting, Everything works pretty well, the disk number in DSM6 starting from 1 to 12 for 3.5", 13 and 14 for 2.5" drive. and synoboot and synodata drives are hidden. Empty bay will not be taken by the other drives. for example, I put disks in 3.5" bay #1,#2,#3,#12, and #1, #2 in 2.5" bay, then the disk numbers in DSM6 are shown as disk 1,2,3,12,13, 14 but when I booted with DSM7 (update 42962) with ARPL loader (v0.5-alpha1), ARPL boot drive at sata0 (0:0) synodata drive at sata1 (1:0) all hard drives: passthrough by HBA330 the old DiskIdxMap=1819 SataPortMap=1 SasIdxMap=0 setting cannot work. system cannot detect any drive. i changed to following setting suggested by running tool in tinycore load "rpload.sh satamap now" SataPortMap: 18 DiskIdxMap: 1000 SasIdxMap: 0 then the drives are listed with wrong order. the empty bays are ignored. for example, I put disks in bay #1,#2,#3,#12,#13,#14, then the disk numbers in DSM6 are 10,11,12,13,14,15, with disk 1 for the syno data drive. anyone know how to fix it? Thanks. Did you try changing the command line option HddHotplug=0 to HddHotplug=1 ? Quote Link to comment Share on other sites More sharing options...
SanKen Posted October 28, 2022 Share #1122 Posted October 28, 2022 I have updated 0.5alpha to version 1.0beta2. After booting, I got Recovery ... but this is not Recovery loop. I clicked Recovery and DSM started up properly. I have a question. I have built-in eMMC 32GB memory in Intel NUC. How to use it for ARPL. i was thinking about using dd from linux. Quote Link to comment Share on other sites More sharing options...
Mincemeat Posted October 28, 2022 Share #1123 Posted October 28, 2022 15 hours ago, RedwinX said: Thanks for bringing that to out attention. We will get right on it, making loaders harder to work and whatever Why u in their dms, you got a legit unit? 1 Quote Link to comment Share on other sites More sharing options...
jurgenautt Posted October 28, 2022 Share #1124 Posted October 28, 2022 Hello, I report that the beta version does not work with my hardware, instead the alpha version v0.5-alpha1 does work correctly (removing some errors that I had previously reported) the version i try rs4021xs+ If you need to carry out any additional tests, tell me fbelavenuto, thank you very much for the work .I proceed in the same way, I format a new USB, I install the image, I carry out the configuration process, everything seems correct, I restart to be able to install the dsm, on the screen everything appears correct, (search ip etc, booting etc) but the windows explorer gives it the ip, but it does nothing, i search with an ip scanner program, but that ip that the loader gives me is not there, as if it did not give the ip or that the drivers of the network cards did not they were fine... Quote Link to comment Share on other sites More sharing options...
jetca Posted October 28, 2022 Share #1125 Posted October 28, 2022 Thanks, Pocopico. I tried HddHotplug=1, and the disk numbers are still the same as HddHotplug=0 . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.