nemesis122 Posted September 1, 2022 Share #576 Posted September 1, 2022 (edited) Hi all I have this error message "when i install on Dell Precision T1700" the file is properly corrupt" i know this error message for old DSM Loader and Version and it means VID or PID is not correct but the vid and pid is correct . Do you know what can be wrong ? Info: Newest ARPL Version and it happens with 7.1.1-42951 / 7.1-42661 Version 3622xs https://www.dell.com/support/kbdoc/de-ch/000129841/precision-t1700-desktop-workstation-hardware-daten it is only one SSD installed on Sata Port 1 thank you very much Edited September 1, 2022 by nemesis122 Quote Link to comment Share on other sites More sharing options...
u357 Posted September 1, 2022 Share #577 Posted September 1, 2022 (edited) 2 hours ago, nemesis122 said: Hi all I have this error message "when i install on Dell Precision T1700" the file is properly corrupt" i know this error message for old DSM Loader and Version and it means VID or PID is not correct but the vid and pid is correct . Do you know what can be wrong ? 2 hours ago, nemesis122 said: make sure you are using the right pat file version which is the same as the Loader eg: 7.1-42661.pat... 7.1-42951.pat Edited September 1, 2022 by u357 Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted September 1, 2022 Share #578 Posted September 1, 2022 Hi Thank you for the tip but im sure this are the rigt pat files. Quote Link to comment Share on other sites More sharing options...
wifi75 Posted September 1, 2022 Share #579 Posted September 1, 2022 On 30/7/2022 at 14:38, Deninyk said: Ciao! Lo uso su un hardware come questo: Ryzen pro 5750G (funziona anche su Ryzen 5600 senza problemi) Gigabyte b550 aorus pro v2 2x16GB Samsung ECC Lsi 9200-8i +Lsi 3008-8i. Installa DS2422+ e DS3622xs+ Funziona senza problemi e vede i dischi sul B550, ma l'ultima versione del programma non ha moduli aggiuntivi (per LSI) e dopo averli installati non vede i dischi, inoltre non vede NVME. Devo aggiungere forzatamente il driver LSI? upd. v0.3-alpha6 non si avvia dopo il caricatore di build, v0.3-alpha5 funziona bene (ma non vedere lsi hba) hi also i would like to install bare metal on ryzen 5600G and b450 gigabyte motherboard. since I have to buy the cpu and ask it second hand, can you confirm that you have no problems with this hardware? Quote Link to comment Share on other sites More sharing options...
Kyle Dam Posted September 2, 2022 Share #580 Posted September 2, 2022 hi, how can I change the SN and mac1 address because it's not valid? Do I need to rebuild the loader after that? Quote Link to comment Share on other sites More sharing options...
apriliars3 Posted September 2, 2022 Share #581 Posted September 2, 2022 (edited) Any problem with disks connect to sata 3.0 with DSM 7.1??? I have one friend that his DS3622xs+ advise to critical error from update DSM 6.2.3 to DSM 7.1. He buy a new one disk and replace this disk, and the advise come back to hours. What´s the issue? The motherboard have 3 sata 2.0 and one sata 3.0, only disk connect to sata 3.0 have this issue and advise (Damaged Volume X). Edited September 2, 2022 by apriliars3 Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted September 2, 2022 Author Share #582 Posted September 2, 2022 On 8/30/2022 at 4:41 PM, nemesis122 said: Hi Thank you for this great Loader it was sucessfully by the first try in VMM . Is there en img file generated by this loader for future use ? thank you very much Michael Sorry, I do not understood! Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted September 2, 2022 Author Share #583 Posted September 2, 2022 On 8/31/2022 at 1:48 PM, neonflx said: tried 3622 , build , boots, when I go to the install , No Drives Detected What version of ARPL are you using? Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted September 2, 2022 Author Share #584 Posted September 2, 2022 On 9/1/2022 at 10:27 AM, nemesis122 said: Hi all I have this error message "when i install on Dell Precision T1700" the file is properly corrupt" i know this error message for old DSM Loader and Version and it means VID or PID is not correct but the vid and pid is correct . Do you know what can be wrong ? Info: Newest ARPL Version and it happens with 7.1.1-42951 / 7.1-42661 Version 3622xs https://www.dell.com/support/kbdoc/de-ch/000129841/precision-t1700-desktop-workstation-hardware-daten it is only one SSD installed on Sata Port 1 thank you very much I noticed this kind of error using build 42951, but it doesn't occur with build 42661! Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted September 2, 2022 Author Share #585 Posted September 2, 2022 14 hours ago, Kyle Dam said: hi, how can I change the SN and mac1 address because it's not valid? Do I need to rebuild the loader after that? Use the "serial" menu to change the SN, use the "cmdline" menu to set a custom MAC. No need to recreate loader for SN and MAC1 1 Quote Link to comment Share on other sites More sharing options...
ax0r7ag0z Posted September 2, 2022 Share #586 Posted September 2, 2022 It works great! It actually took longer to extend the usb flash drive space on first boot than actually configure and build the thing I tried DS3622xs+ on a Dell R720 with an LSI card in IT mode, worked like a charm and saw all of the 10c/20t of the cpu in VMM Again, great work man! Quote Link to comment Share on other sites More sharing options...
u357 Posted September 2, 2022 Share #587 Posted September 2, 2022 On 9/2/2022 at 1:32 AM, nemesis122 said: Hi Thank you for the tip but im sure this are the rigt pat files. There won't be a problem in vid and pid because it was in auto detect mode. I don't think it is the SATA problem because if it's can't found any disk, there should be a error message shown as " No hdd Detect". Are you using the lastest ARPL 0.4-alpha4 version ? The pat file shoud be "DSM_DS3622xs+_42951.pat". Good luck Quote Link to comment Share on other sites More sharing options...
neonflx Posted September 3, 2022 Share #588 Posted September 3, 2022 On 9/2/2022 at 11:27 AM, fbelavenuto said: What version of ARPL are you using? the latest one, i was able to install by editing sataportmap and idxmap and got it to work thanks all for the help Quote Link to comment Share on other sites More sharing options...
Deninyk Posted September 3, 2022 Share #589 Posted September 3, 2022 В 01.09.2022 в 22:33, wifi75 сказал: hi also i would like to install bare metal on ryzen 5600G and b450 gigabyte motherboard. since I have to buy the cpu and ask it second hand, can you confirm that you have no problems with this hardware? Hi! With v0.4-alpha4 all work fine + LSI 3008/2008 work! Quote Link to comment Share on other sites More sharing options...
frezeen Posted September 4, 2022 Share #590 Posted September 4, 2022 (edited) edit: dont take care of this post. Edited September 4, 2022 by frezeen Quote Link to comment Share on other sites More sharing options...
vinhnguyen Posted September 5, 2022 Share #591 Posted September 5, 2022 Version 7.1.1-42962 is available... Synology Archive Download Site - Index of /download/Os/DSM/7.1.1-42962 Quote Link to comment Share on other sites More sharing options...
scfrancis Posted September 5, 2022 Share #592 Posted September 5, 2022 (edited) Hi there, Big mistake on my part, I wanted to upgrade to the latest version (42962) with a DVA1622. I wanted, suddenly, to put back version 42951 and I have a hash error on the pat file (in ARPL 0.4-alpha4)... Do you have a tip to get my DVA1622 working again please? Thanks Edited September 5, 2022 by scfrancis Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted September 5, 2022 Author Share #593 Posted September 5, 2022 2 hours ago, scfrancis said: Hi there, Big mistake on my part, I wanted to upgrade to the latest version (42962) with a DVA1622. I wanted, suddenly, to put back version 42951 and I have a hash error on the pat file (in ARPL 0.4-alpha4)... Do you have a tip to get my DVA1622 working again please? Thanks Update the loader for the v0.4-alpha5 version, I've added the new buildnumber. 1 Quote Link to comment Share on other sites More sharing options...
vinhnguyen Posted September 5, 2022 Share #594 Posted September 5, 2022 35 minutes ago, fbelavenuto said: Update the loader for the v0.4-alpha5 version, I've added the new buildnumber. i update and it gives error… Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted September 5, 2022 Author Share #595 Posted September 5, 2022 (edited) 7 minutes ago, vinhnguyen said: i update and it gives error… Maybe your previous version is much older. Please burn your media with the last image. Sorry, the github actions is still running, my bad! https://github.com/fbelavenuto/arpl/actions/runs/2993472808 Please wait to finish. Edited September 5, 2022 by fbelavenuto 2 Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted September 5, 2022 Author Share #596 Posted September 5, 2022 Now v0.4-alpha5 is ready! 1 Quote Link to comment Share on other sites More sharing options...
apriliars3 Posted September 5, 2022 Share #597 Posted September 5, 2022 (edited) 2 hours ago, fbelavenuto said: Now v0.4-alpha5 is ready! No works with new DSM 7.1.1-42962. Thanks Edited September 5, 2022 by apriliars3 Quote Link to comment Share on other sites More sharing options...
Joge Posted September 5, 2022 Share #598 Posted September 5, 2022 Hello fbelavenuto, Thanks for your work ! I've an issue with my HP Microserver Gen8 with an HP NC365T network card (Intel 82580). I'm stuck on Booting... I tried 2 different USB keys, same problem. Any idea ? Thanks Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted September 5, 2022 Author Share #599 Posted September 5, 2022 3 minutes ago, Joge said: Hello fbelavenuto, Thanks for your work ! I've an issue with my HP Microserver Gen8 with an HP NC365T network card (Intel 82580). I'm stuck on Booting... I tried 2 different USB keys, same problem. Any idea ? Thanks Other people have complained of problems with this type of server. I still don't know what the problem is! Quote Link to comment Share on other sites More sharing options...
apriliars3 Posted September 5, 2022 Share #600 Posted September 5, 2022 (edited) 2 hours ago, fbelavenuto said: Now v0.4-alpha5 is ready! No booting with .vmdk Update from alpha 4 to alpha 5 and freeze display when booting, but DSM booting well. Edited September 5, 2022 by apriliars3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.