DS3622xs+ DSM 7.1.1-42962 Bad SATA Port issue

[arunmcops]

System Config:

CPU- Intel Core i5 3570

MB- Intel H61

HDD/SSD- As below

SATA Controllers- 1.  Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05) (4 SATA3 Ports)

                              2. Marvell Technology Group Ltd. Device 9215 (rev 11) (4 SATA3 Ports)

 

Issue:

 

Found "00:1f.2 Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05)"
Detected 6 ports/3 drives. Bad ports: 3 4. Override # of ports or ENTER to accept <6>

Found "03:00.0 Marvell Technology Group Ltd. Device 9215 (rev 11)"
Detected 4 ports/0 drives. Override # of ports or ENTER to accept <4>

Computed settings:
SataPortMap=64
DiskIdxMap=0006

WARNING: Bad ports are mapped. The DSM installation will fail!

 

Port 3, 4 aka bad ports don't even exist on board.  DSM working fine.

Drive 1/4 are on Marvell Controller and Drive 11/12 are on Intel onboard SATA Controller.

 

Edit: Tried putting all 4 drives in Intel Controller and only 3 are detected.So it seems one physical sata port is mapped as Bad port although same is working fine in other OSes including TCRP. 

 

LSPCI.txt

Edited September 23, 2022 by arunmcops